IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
While we haven't implemented a key for users to set MACVLAN/MACVTAP flags,
we can at least allow them to make use of the Promiscuous= key of
the corresponding link to set the nopromisc flag.
Note that this slightly breaks backward compatibility when
Termination=1. Previously, this is handled as boolean true, then 120 ohm
was used. But now with this commit, it is handled as 1 ohm.
We only need the PE header offset from the DOS header, not
its size. Previously, the section table could be cut off in the middle.
While we are at it, also modernize the remaining code.
The SERVFAIL RCODE can be generated for many reasons which may not be related
to lack of feature support. For example, the Stubby resolver generates
SERVFAIL when a request times out. Such transient failures can cause
unnecessary downgrades to both the transaction and the server's feature level.
The consequences of this are especially severe if the server is in DNSSEC
strict mode. In this case repeated downgrades eventually cause the server to
stop resolving entirely with the error "incompatible-server".
To avoid unnecessary downgrades the request should be retried once with the
current level before the transaction's feature level is downgraded.
The commit introduces a callback invoked from log_syntax_internal.
Use it from systemd-analyze to gather a list of units that contain
syntax warnings. A new command line option is added to make use of this.
The new option --recursive-errors takes in three possible modes:
1. yes - which is the default. systemd-analyze exits with an error when syntax warnings arise during verification of the
specified units or any of their dependencies.
3. no - systemd-analyze exits with an error when syntax warnings arise during verification of only the selected unit.
Analyzing and loading any dependencies will be skipped.
4. one - systemd-analyze exits with an error when syntax warnings arise during verification
of only the selected units and their direct dependencies.
Below are two service unit files that I created for the purposes of testing:
1. First, we run the commands on a unit that does not have dependencies but has a non-existing key-value setting (i.e. foo = bar).
> cat <<EOF>testcase.service
[Unit]
foo = bar
[Service]
ExecStart = echo hello
EOF
OUTPUT:
maanya-goenka@debian:~/systemd (log-error)$ sudo build/systemd-analyze verify testcase.service
/home/maanya-goenka/systemd/testcase.service:2: Unknown key name 'foo' in section 'Unit', ignoring.
/usr/lib/systemd/system/plymouth-start.service:15: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
/usr/lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
/usr/lib/systemd/system/gdm.service:30: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
maanya-goenka@debian:~/systemd (log-error)$ echo $?
1
maanya-goenka@debian:~/systemd (log-error)$ sudo build/systemd-analyze verify --recursive-errors=yes testcase.service
/home/maanya-goenka/systemd/testcase.service:2: Unknown key name 'foo' in section 'Unit', ignoring.
/usr/lib/systemd/system/plymouth-start.service:15: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
/usr/lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
/usr/lib/systemd/system/gdm.service:30: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
maanya-goenka@debian:~/systemd (log-error)$ echo $?
1
maanya-goenka@debian:~/systemd (log-error)$ sudo build/systemd-analyze verify --recursive-errors=no testcase.service
/home/maanya-goenka/systemd/testcase.service:2: Unknown key name 'foo' in section 'Unit', ignoring.
maanya-goenka@debian:~/systemd (log-error)$ echo $?
1
maanya-goenka@debian:~/systemd (log-error)$ sudo build/systemd-analyze verify --recursive-errors=one testcase.service
/home/maanya-goenka/systemd/testcase.service:2: Unknown key name 'foo' in section 'Unit', ignoring.
/usr/lib/systemd/system/plymouth-start.service:15: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
/usr/lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
/usr/lib/systemd/system/gdm.service:30: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
maanya-goenka@debian:~/systemd (log-error)$ echo $?
1
2. Next, we run the commands on a unit that is syntactically valid but has a non-existing dependency (i.e. foo2.service)
> cat <<EOF>foobar.service
[Unit]
Requires = foo2.service
[Service]
ExecStart = echo hello
EOF
OUTPUT:
maanya-goenka@debian:~/systemd (log-error)$ sudo build/systemd-analyze verify foobar.service
/usr/lib/systemd/system/plymouth-start.service:15: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
/usr/lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
/usr/lib/systemd/system/gdm.service:30: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
foobar.service: Failed to create foobar.service/start: Unit foo2.service not found.
maanya-goenka@debian:~/systemd (log-error)$ echo $?
1
maanya-goenka@debian:~/systemd (log-error)$ sudo build/systemd-analyze verify --recursive-errors=yes foobar.service
/usr/lib/systemd/system/plymouth-start.service:15: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
/usr/lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
/usr/lib/systemd/system/gdm.service:30: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
foobar.service: Failed to create foobar.service/start: Unit foo2.service not found.
maanya-goenka@debian:~/systemd (log-error)$ echo $?
1
maanya-goenka@debian:~/systemd (log-error)$ sudo build/systemd-analyze verify --recursive-errors=no foobar.service
maanya-goenka@debian:~/systemd (log-error)$ echo $?
0
maanya-goenka@debian:~/systemd (log-error)$ sudo build/systemd-analyze verify --recursive-errors=one foobar.service
/usr/lib/systemd/system/plymouth-start.service:15: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
/usr/lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
/usr/lib/systemd/system/gdm.service:30: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
foobar.service: Failed to create foobar.service/start: Unit foo2.service not found.
maanya-goenka@debian:~/systemd (log-error)$ echo $?
1
The MANAGER_TEST_RUN_IGNORE_DEPENDENCIES flag was added in order to allow the caller
to skip the recursive loading of dependency units when loading specific
unit files. This includes the default dependencies, the specified dependencies, the slice.
This will be used by systemd-analyze to allow checking individual unit files in isolation.
There is a ASSERT() macro from gnu-efi, but that does not show any
output to ConOut. Having to do some additional setup just to get
some debug output is tedious and outright difficult on real hardware.
log_error_stall() and log_error_status_stall() will ensure the user has
a chance to catch an error message by stalling and also forcing a
lightred/black color on it. Also, convert several Print() calls to it
since they are actually error messages.
