IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
This test has overlap with test-install-root, but it tests things at a
different level, so I think it's useful to add. It immediately shows various
bugs which will be fixed in later patches.
A reattach might go from img.raw to img_0.1.raw or viceversa, but this is
not allowed right now as we try to match the full name.
Also take into account that running strcspn(a, '/') on an image name, without
leading path, will return the length of the full string, but the versions
might be different so they won't match, eg:
img_0.1.raw -> 12
img_0.1.1.raw -> 14
So adjust the check to take that into account, and skip it if we are not
dealing with directories
On a very slow machine, things are executed out-of-order, and something
pins the previously-exited unit. Instead of fighting with this with daemon-reload,
let's just use a different cleanup unit.
Hopefully fixes#22755.
"meson test" uses a test name generated from the file name and those long names
cause the test log output to exceed terminal width which looks bad. Let's replace
some long names with more-meaningful names that actually say something about
the tests.
Add tests for enrolling and unlocking. Various cases are tested:
- Default PCR 7 policy w/o PIN, good and bad cases (wrong PCR)
- PCR 7 + PIN policy, good and bad cases (wrong PCR, wrong PIN)
- Non-default PCR 0+7 policy w/o PIN, good and bad cases (wrong PCR 0)
v2: rename test, fix tss2 library installation, fix CI failures
v3: fix ppc64, load module
It seems there exists a short time period that we cannot see the
loopback device after `losetup` is finished:
```
testsuite-58.sh[367]: ++ losetup -b 1024 -P --show -f /tmp/testsuite-58-sector-1024.img
kernel: loop1: detected capacity change from 0 to 204800
testsuite-58.sh[285]: + LOOP=/dev/loop1
testsuite-58.sh[285]: + systemd-repart --pretty=yes --definitions=/tmp/testsuite-58-sector/ --seed=750b6cd5c4ae4012a15e7be3c29e6a47 --empty=require --dry-run=no /dev/loop1
testsuite-58.sh[368]: Device '/dev/loop1' has no dm-crypt/dm-verity device, no need to look for underlying block device.
testsuite-58.sh[368]: Failed to determine canonical path for '/dev/loop1': No such file or directory
testsuite-58.sh[368]: Failed to open file or determine backing device of /dev/loop1: No such file or directory
```
The Ubuntu CI on ppc64el seems to have a issue on tmpfs, and files
may not be fsynced. See c10caebb98.
For safety, let's use /var/tmp to store disk images.
Unprivileged overlayfs is supported since Linux 5.11. The only
change needed to get ExtensionDirectories to work is to avoid
hard-coding the staging directory to the system manager runtime
directory, everything else just works (TM).
The first ExecStartPre or the first ExecStart commands would get the metadata,
but not the subsequent ones. Also check that we do not pass it in
ExecStartPost.
The test would fail when the the same handler was used for multiple
*failing* units. We need to call 'reset-failed' to let the manager forget
about the earlier ones.
systemd-analyze log-target console is removed, because it's easier to follow
the logs if logging it to the journal.
Remove the list logic, and simply skip passing metadata if more than one
unit triggered an OnFailure/OnSuccess handler.
Instead of a single env var to loop over, provide each separate item
as its own variable.
Fixes https://github.com/systemd/systemd/issues/22370
The only piece missing was to somehow make /proc appear in the
new user+mount namespace. It is not possible to mount a new
/proc instance, not even with hidepid=invisible,subset=pid, in
a user namespace unless a PID namespace is created too (and also
at the same time as the other namespaces, it is not possible to
mount a new /proc in a child process that creates a PID namespace
forked from a parent that created a user+mount namespace, it has
to happen at the same time).
Use the host's /proc with a bind-mount as a fallback for this
case. User session services would already run with it, so
nothing is lost.
On Ubuntu CI on ppc64el, the test randomly fails when /run/udev is not
synced before checking its contents (see #22357). But /run/udev is a
tmpfs and fsync on tmpfs is noop (see `struct shmem_file_operations` in
mm/shmem.c of the kernel), hence, it is not necessary to call fsync on
/run/udev in general. This should be a testing emvironment issue (I
guess it is an issue on nested KVM on ppc64el), instead of an issue on
udev.
C.f. #22357.
Fixes#21603.
In some BIOSes, the "Number of slots or sockets available for Memory
Devices in this array" is incorrectly set to the number of memory array
that's populated.
Work-around this problem by outputting the number of sockets after
having parsed them so that consumers of this data can carry on expecting
an accurate number in this property.
This fixes the number of memory slots advertised for the HP Z600.
See https://gitlab.gnome.org/GNOME/gnome-control-center/-/issues/1686
IIUC, pipefail doesn't matter for a sequence of commands joined with &&, and we
don't have any pipes. And such a failing expression also does not trigger an
exit, so the set +e/set -e were noops.
Make sure our RPM macros work as intended. Based on the original PR
(#16464) by Mikhail Novosyolov.
Co-authored-by: Mikhail Novosyolov <m.novosyolov@rosalinux.ru>
Add support for managing and configuring watchdog pretimeout values if
the watchdog hardware supports it. The ping interval is adjusted to
account for a pretimeout so that it will still ping at half the timeout
interval before a pretimeout event would be triggered. By default the
pretimeout defaults to 0s or disabled.
The RuntimeWatchdogPreSec config option is added to allow the pretimeout
to be specified (similar to RuntimeWatchdogSec). The
RuntimeWatchdogPreUSec dbus property is added to override the pretimeout
value at runtime (similar to RuntimeWatchdogUSec). Setting the
pretimeout to 0s will disable the pretimeout.
There is no reason networkd refuses that. Especially, when multiple
downstream interfaces are connected to the same network, it is natural to
assign the same subnet prefix to them.
Prompted by #22571.
It should make it easier to figure out what exactly services do there.
For example, with SYSTEMD_LOG_LEVEL=debug userdbd (v249) prints
```
varlink-5: New incoming message: {"method":"io.systemd.UserDatabase.GetUserRecord","parameters":{}}
```
before it crashes and systemd-resolved prints
```
varlink-21: New incoming message: {"method":"io.systemd.Resolve.ResolveAddress","parameters":{"address":[127,0,0,1],"flags":0,"ifindex":1000000,"family":0}}
```
and those messages are helpful (especially when scripts causing them
aren't clever enough to keep track of random stuff they send to systemd
:-))
If we assign our own test runner, passing arguments stops working
as unittest won't instantiate its own test runner after it parses
the arguments from sys.argv.
Consequence is that the tests will write to stderr now instead of
stdout since it doesn't seem possible to configure the stream that
unittest.main() will instantiate its test runner with so it'll
default to sys.stderr.
otherwise units using `DynamicUser=yes` won't be able to write the
coverage stats (currently affecting TEST-20-MAINPIDGAMES).
`DynamicUser=yes` implies `ProtectSystem=strict` and
`ProtectHome=read-only` and can't be overridden hence we need to
utilize `ReadWritePaths=` to work around that.
If the test logs contain lines like:
```
...systemd-resolved[735885]: profiling:/systemd-meson-build/src/shared/libsystemd-shared-250.a.p/base-filesystem.c.gcda:Cannot open
```
it means we're possibly missing some coverage since gcov can't write the stats,
usually due to the sandbox being too restrictive (e.g. ProtectSystem=yes,
ProtectHome=yes) or the $BUILD_DIR being inaccessible to non-root users.
Every time I need it I have to first relearn autopkgtest and find where
all the necessary stuff lives, so let's document it somewhere close to
systemd for (at least) future me.
In cbcdcaaa0e ("Add support for conditions on the machines firmware")
a new Firmware= directive was added for .netdev and .network files.
While it was also documented to work on .link files, in actual fact the
support was missing. Add that one extra line to make it work, and also
update the fuzzer directives.
Add the "Isolated" parameter in the *.network file, e.g.,
[Bridge]
Isolated=true|false
When the Isolated parameter is true, traffic coming out of this port
will only be forward to other ports whose Isolated parameter is false.
When Isolated is not specified, the port uses the kernel default
setting (false).
The "Isolated" parameter was introduced in Linux 4.19.
See man bridge(8) for more details.
But even though the kernel and bridge/iproute2 recognize the "Isolated"
parameter, systemd-networkd did not have a way to set it.
The warning is correct, since we don't inherit the necessary
unittest.TestCase class, but that's on purpose, since the Utilities
class is not supposed to be instantiated on its own, but should
complement other classes' definitions which do inherit from the
unittest.TestCase class.
It currently works because `\(` and `\)` are not valid escape sequences,
so they're not treated differently. Using raw strings (or double
backslashes) is a more correct solution.
Multiline comments are converted to docstrings only when they're the
first statement in a function/method. Even though they're still a no-op
otherwise, let's use "true" comments to make pylint happy.
to let them use reproducible identifiers, which should make it possible
to really use files copied from OSS-Fuzz to reproduce issues on
GHActions and locally. Prompted by https://github.com/systemd/systemd/pull/22365
