IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
../src/journal-remote/microhttpd-util.c: In function ‘check_permissions’:
../src/journal-remote/microhttpd-util.c:301:5: error: function might be candidate for attribute ‘noreturn’ [-Werror=suggest-attribute=noreturn]
301 | int check_permissions(struct MHD_Connection *connection, int *code, char **hostname) {
| ^~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
Fixes#23630.
Without the size limits, oss-fuzz creates huge samples that time out. Usually
this is because some of our code has bad algorithmic complexity. For data like
configuration samples we don't need to care about this: non-rogue configs are
rarely more than a few items, and a bit of a slowdown with a few hundred items
is acceptable. This wouldn't be OK for processing of untrusted data though.
We need to set the limit in two ways: through .options and in the code. The
first because it nicely allows libFuzzer to avoid wasting time, and the second
because fuzzers like hongfuzz and afl don't support .options.
While at it, let's fix an off-by-one (65535 is the largest offset for a
power-of-two size, but we're checking the size here).
Co-authored-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
It seems that we try to create a new file, which fails with -ENOSPC, and we
later fail when reading a file with ENODATA. journal_file_open() will return
-ENODATA if the file is too short or if journal_file_verify_header() fails.
We'll unlink a file we newly created if we fail to initialize it immediately
after creation. I'm not sure if the file we fail to open is the one we newly
created and e.g. failed to create the arena and such, or if it's the file we
were trying to rotate away from. Either way, I think we should be OK with
with a non-fully-initialized journal file.
Failed to create rotated journal: No space left on device
Failed to write entry of 2 bytes: No space left on device
sd_journal_open_files(["/tmp/fuzz-journal-remote.vELRpI.journal"]) failed: No data available
Assertion 'IN_SET(r, -ENOMEM, -EMFILE, -ENFILE)' failed at src/journal-remote/fuzz-journal-remote.c:70, function int LLVMFuzzerTestOneInput(const uint8_t *, size_t)(). Aborting.
oss-fuzz-39238: https://oss-fuzz.com/issue/4609851129462784
This is a high-level function, and it belongs in libsystemd-shared. This way we
don't end up linking a separate copy into various binaries. It would even end
up in libsystemd, where it is not needed. (Maybe it'd be removed in some
optimization phase, but it's better to not rely on that.)
$ grep -l -r -a 'path is not absolute%s' build/
build/libnss_systemd.so.2
build/pam_systemd_home.so
build/test-dlopen
build/src/basic/libbasic.a.p/path-util.c.o
build/src/basic/libbasic.a
build/src/shared/libsystemd-shared-249.so
build/test-bus-error
build/libnss_mymachines.so.2
build/pam_systemd.so
build/libnss_resolve.so.2
build/libnss_myhostname.so.2
build/libsystemd.so.0.32.0
build/libudev.so.1.7.2
$ grep -l -r -a 'path is not absolute%s' build/
build/src/shared/libsystemd-shared-251.a.p/parse-helpers.c.o
build/src/shared/libsystemd-shared-251.a
build/src/shared/libsystemd-shared-251.so
No functional change.
GIT_VERSION is not available as a config.h variable, because it's rendered
into version.h during builds. Let's rework jinja2 rendering to also
parse version.h. No functional change, the new variable is so far unused.
I guess this will make partial rebuilds a bit slower, but it's useful
to be able to use the full version string.
The approach to use '''…'''.split() instead of a list of strings was initially
used when converting from automake because it allowed identical blocks of lines
to be used for both, making the conversion easier.
But over the years we have been using normal lists more and more, especially
when there were just a few filenames listed. This converts the rest.
No functional change.
by always calling journal_remote_server_destroy, which resets global
variables like journal_remote_server_global. It should prevent crashes like
```
Assertion 'journal_remote_server_global == NULL' failed at src/journal-remote/journal-remote.c:312, function int journal_remote_server_init(RemoteServer *, const char *, JournalWriteSplitMode, _Bool, _Bool)(). Aborting.
AddressSanitizer:DEADLYSIGNAL
=================================================================
==24769==ERROR: AddressSanitizer: ABRT on unknown address 0x0539000060c1 (pc 0x7f23b4d5818b bp 0x7ffcbc4080c0 sp 0x7ffcbc407e70 T0)
SCARINESS: 10 (signal)
#0 0x7f23b4d5818b in raise /build/glibc-eX1tMB/glibc-2.31/sysdeps/unix/sysv/linux/raise.c:51:1
#1 0x7f23b4d37858 in abort /build/glibc-eX1tMB/glibc-2.31/stdlib/abort.c:79:7
#2 0x7f23b5731809 in log_assert_failed systemd/src/basic/log.c:866:9
```
The meson default for static_library() are:
build_by_default=true, install=false. We never interact with the
static libraries, and we only care about them as a stepping-stone towards
the installable executables or libraries. Thus let's only build them if
they are a dependency of something else we are building.
While at it, let's drop install:false, since this appears to be the default.
This change would have fixed the issue with lib_import_common failing
to build too: we wouldn't attempt to build it.
In practice this changes very little, because we generally only declare static
libraries where there's something in the default target that will make use of
them. But it seems to be a better pattern to set build_by_default to false.
Preparatory commit; before JournalFile can stop hanging onto its
copy of MMapCache, all these users need to find another way.
Most of the time these callers already have the MMapCache onhand,
so it's no big deal for them to just supply it.
journal_file_rotate() in particular needed to change, and it
seemed wise to not use the mmap_cache_fd_cache() accessor on
f->cache_fd, instead requiring the caller supply the cache to
use. This was done with an eye towards a potential future where
the journal_file_archive() isolates the cache_fd to a private
cache, which the newly rotated-to file wouldn't be allowed to
use. It's no biggie for the existing callers to just provide the
appropriate surviving cache.
Basically the mmap_cache_fd_cache() accessor was added just for
journal-verify.c's (ab)use of the mmap-cache. Which, if the
ugly singleton MMapCache assumption ever goes away, can be
cleaned up to simply use a separate MMapCache for those search
arrays.
Currently, all the logic related to writing journal files lives in
journal-file.c which is part of libsystemd (sd-journal). Because it's
part of libsystemd, we can't depend on any code from src/shared.
To allow using code from src/shared when writing journal files, let's
gradually move the write related logic from journal-file.c to
journald-file.c in src/journal. This directory is not part of libsystemd
and as such can use code from src/shared.
We can safely remove any journal write related logic from libsystemd as
it's not used by any public APIs in libsystemd.
This commit introduces the new file along with the JournaldFile struct
which wraps an instance of JournalFile. The goal is to gradually move
more functions from journal-file.c and fields from JournalFile to
journald-file.c and JournaldFile respectively.
This commit also modifies all call sites that write journal files to
use JournaldFile instead of JournalFile. All sd-journal tests that
write journal files are moved to src/journal so they can make use of
journald-file.c.
Because the deferred closes logic is only used by journald, we move it
out of journal-file.c as well. In journal_file_open(), we would wait for
any remaining deferred closes for the file we're about to open to complete
before continuing if the file was not newly created. In journald_file_open(),
we call this logic unconditionally since it stands that if a file is newly
created, it can't have any outstanding deferred closes.
No changes in behavior are introduced aside from the earlier execution
of waiting for any deferred closes to complete when opening a new journal
file.
When using "capture : true" in custom_target()s the mode of the source
file is not preserved when the generated file is not installed and so
needs to be tweaked manually. Switch from output capture to creating the
target file and copy the permissions from the input file.
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
rearrange_stdio() invalidates specified fds even on failure, which means
we should always invalidate the fds we pass in no matter what. Let's
make this explicit by using TAKE_FD() for that everywhere.
Note that in many places we such invalidation doesnt get us much
behaviour-wise, since we don't use the variables anymore later. But
TAKE_FD() in a way is also documentation, it encodes explicitly that the
fds are invalidated here, so I think it's a good thing to always make
this explicit here.
When journald is rotating a file, we'd like to log the reason at
LOG_INFO or higher instead of LOG_DEBUG. For journalctl --header,
logging the reason at a level higher than LOG_DEBUG doesn't really
make sense. To accomodate both use cases, make the log level used
by journal_file_rotate_suggested() configurable.
Let's define two helpers strdupa_safe() + strndupa_safe() which do the
same as their non-safe counterparts, except that they abort if called
with allocations larger than ALLOCA_MAX.
This should ensure that all our alloca() based allocations are subject
to this limit.
afaics glibc offers three alloca() based APIs: alloca() itself,
strndupa() + strdupa(). With this we have now replacements for all of
them, that take the limit into account.
LLVM 13 introduced `-Wunused-but-set-variable` diagnostic flag, which
trips over some intentionally set-but-not-used variables or variables
attached to cleanup handlers with side effects (`_cleanup_umask_`,
`_cleanup_(notify_on_cleanup)`, `_cleanup_(restore_sigsetp)`, etc.):
```
../src/basic/process-util.c:1257:46: error: variable 'saved_ssp' set but not used [-Werror,-Wunused-but-set-variable]
_cleanup_(restore_sigsetp) sigset_t *saved_ssp = NULL;
^
1 error generated.
```
In general we almost never hit those asserts in production code, so users see
them very rarely, if ever. But either way, we just need something that users
can pass to the developers.
We have quite a few of those asserts, and some have fairly nice messages, but
many are like "WTF?" or "???" or "unexpected something". The error that is
printed includes the file location, and function name. In almost all functions
there's at most one assert, so the function name alone is enough to identify
the failure for a developer. So we don't get much extra from the message, and
we might just as well drop them.
Dropping them makes our code a tiny bit smaller, and most importantly, improves
development experience by making it easy to insert such an assert in the code
without thinking how to phrase the argument.
In https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=34803, we fail with:
Assertion 'IN_SET(r, -ENOMEM, -EMFILE, -ENFILE)' failed at src/journal-remote/fuzz-journal-remote.c:69,
function int LLVMFuzzerTestOneInput(const uint8_t *, size_t)(). Aborting.
AddressSanitizer:DEADLYSIGNAL
Let's try to print the error, so maybe we can see what is going on.
With the previous commit we shouldn't print out anything.
Those are unexpected, so a user-visible message seems appropriate.
But they are not our errors, and to some extent we can recover from
them, so "warning" seems more appropriate than "error".
We recently started making more use of malloc_usable_size() and rely on
it (see the string_erase() story). Given that we don't really support
sytems where malloc_usable_size() cannot be trusted beyond statistics
anyway, let's go fully in and rework GREEDY_REALLOC() on top of it:
instead of passing around and maintaining the currenly allocated size
everywhere, let's just derive it automatically from
malloc_usable_size().
I am mostly after this for the simplicity this brings. It also brings
minor efficiency improvements I guess, but things become so much nicer
to look at if we can avoid these allocation size variables everywhere.
Note that the malloc_usable_size() man page says relying on it wasn't
"good programming practice", but I think it does this for reasons that
don't apply here: the greedy realloc logic specifically doesn't rely on
the returned extra size, beyond the fact that it is equal or larger than
what was requested.
(This commit was supposed to be a quick patch btw, but apparently we use
the greedy realloc stuff quite a bit across the codebase, so this ends
up touching *a*lot* of code.)
One stanza had "if install_sysconfdir_samples", while the other
"if install_sysconfdir", which looks like a mistake.
install_sysconfdir_samples is now used for both.
Using a enum is all nice and generic, but at this point it seems unlikely that
we'll add further build modes. But having an enum means that we need to include
the header file with the enumeration whenerever the conditional is used. I want
to use the conditional in log.h, which makes it hard to avoid circular imports.
With some versions of the compiler, the _cleanup_ attr makes it think
the variable might be freed/closed when uninitialized, even though it
cannot happen. The added cost is small enough to be worth the benefit,
and optimized builds will help reduce it even further.
