IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Especially sentences like "filename ends in .suffix" are easier to
parse if the suffix is surrounded by quotes. In sentences like
"requires a .service unit", where the suffix is used as a class
designation, there is no need to use quotes.
Use proper grammar, word usage, adjective hyphenation, commas,
capitalization, spelling, etc.
To improve readability, some run-on sentences or sentence fragments were
revised.
[zj: remove the space from 'file name', 'host name', and 'time zone'.]
When manpages are displayed on a terminal, <literal>s are indistinguishable
from surrounding text. Add quotes everywhere, remove duplicate quotes,
and tweak a few lists for consistent formatting.
https://bugzilla.redhat.com/show_bug.cgi?id=874631
This change is based on existing usage in systemd and online.
'File-system' may make sense in adjectival form, but man pages
seem to prefer 'file system' even in those situations.
Just as with SMACK, we don't really know if a policy has been
loaded or not, as the policy interface is write-only. Assume
therefore that if ima is present in securityfs that it is
enabled.
Update the man page to reflect that "ima" is a valid option
now as well.
According to Documentation/security/Smack.txt:
In keeping with the intent of Smack, configuration data is minimal
and not strictly required. The most important configuration step is
mounting the smackfs pseudo filesystem.
This means that checking the mount point should be enough.
Everything which is an absolute filename marked with <filename></filename>
lands in the index, unless noindex= attribute is present. Should make
it easier for people to find stuff when they are looking at a file on
disk.
Various formatting errors in manpages are fixed, kernel-install(1) is
restored to formatting sanity.
We generally document the suggested paths, not the paths possible in
weird, non-standard setups. We do this in order to not confuse
administrators/users unnecessarily and to push people to install things
into the same directories on all distributions.
We are PID 1 after all, the really basic building block of the OS.
Unlike for an app there's very little benefit in being entirely
relocatable.
This makes it easier to add substitutions to man pages,
avoiding the separate transformation step.
mkdir -p's are removed from the rule, because xsltproc will
will create directories on it's own.
All in all, two or three forks per man page are avoided,
which should make things marginally faster.
Unfortunately python parsers must too be tweaked to handle
entities. This isn't particularly easy: with lxml a custom
Resolver can be used, but the stdlib etree doesn't support
external entities *at all*. So when running without lxml,
the entities are just removed. Right now it doesn't matter,
since the entities are not indexed anyway. But I intend to
add indexing of filenames in the near future, and then the
index generated without lxml might be missing a few lines.
Oh well.
This allows one templated unit to refer to another templated unit
at installation time.
Examples:
> grep WantedBy ~/.config/systemd/user/mpop@.timer
WantedBy=services@%i.target
> srv disable mpop@iit.timer
rm '/home/alxchk/.config/systemd/user/services@iit.target.wants/mpop@iit.timer'
> srv enable mpop@iit.timer
ln -s '/home/alxchk/.config/systemd/user/mpop@.timer' '/home/alxchk/.config/systemd/user/services@iit.target.wants/mpop@iit.timer'
Based-on-patch-by: Oleksii Shevchuk <alxchk@gmail.com>
New sections are added: PAM options, crypttab options, commandline
options, miscellaneous. The last category will be used for all
untagged <varname> elements.
Commandline options sections is meant to be a developer tool: when
adding an option it is sometimes useful to be able to check if
similarly named options exist elsewhere.
For all unit files foobar.service we will now read
foobar.service.d/*.conf, too. This may be used to override certain unit
settings without having to edit unit files directly.
This makes it really easy to change specific settings for services
without having to edit any unit file:
mkdir /etc/systemd/system/avahi-daemon.service.d/
echo -e '[Service]\nNice=99' > /etc/systemd/system/avahi-daemon.service.d/nice.conf
systemctl daemon-reload
https://bugs.freedesktop.org/show_bug.cgi?id=55890
Fixed typos, serial comma, and removed "either" as there were more
than two options. Also did an extra rename of "system-shutdown"
to "systemd-shutdown" that was forgotten in commit
8bd3b8620c
As you likely know, Arch Linux is in the process of moving to systemd.
So I was reading through the various systemd docs and quickly became
baffled by this new abbreviation "resp.", which I've never seen before
in my English-mother-tongue life.
Some quick Googling turned up a reference:
<http://www.transblawg.eu/index.php?/archives/870-Resp.-and-other-non-existent-English-wordsNicht-existente-englische-Woerter.html>
I guess it's a literal translation of the German "Beziehungsweise", but
English doesn't work the same way. The word "respectively" is used
exclusively to provide an ordering connection between two lists. E.g.
"the prefixes k, M, and G refer to kilo-, mega-, and giga-,
respectively." It is also never abbreviated to "resp." So the sentence
"Sets the default output resp. error output for all services and
sockets" makes no sense to a natural English speaker.
This patch removes all instances of "resp." in the man pages and
replaces them with sentences which are much more clear and, hopefully,
grammatically valid. In almost all instances, it was simply replacing
"resp." with "or," which the original author (Lennart?) could probably
just do in the future.
The only other instances of "resp." are in the src/ subtree, which I
don't feel privileged to correct.
Signed-off-by: Andrew Eikum <aeikum@codeweavers.com>
This should address TODO item "new dependency type to "group" services
in a target". Semantic of new dependency is as follows. Once configured
it creates dependency which will cause that all dependent units get
stopped if unit they all depend on is stopped or restarted. Usual use
case would be configuring PartOf=some.target in template unit file
and WantedBy=some.target in [Install] section and enabling desired
number of instances. In this case starting one instance won't pull in
target but stopping or starting target(in case of WantedBy is properly
configured) will cause stop/start of all instances.
These printf specifiers allow us to refer to $HOME and $USER
in unit files. These are particularly helpful in instanced
units that have "User=" set, and in systemd --user domains.
The specifiers will return the pw_name and pw_dir fields
if the unit file has a User= field.
If the unit file does not have a User= field, the value
substituted is either $USER or $HOME from the environment,
or, if unset, the values from pw_name or pw_dir.
This patch is somewhat after Ran Benita's original patch,
which didn't get merged. I've split up the 2 specifiers
and extended them to do what is logically expected from
these specifiers.
Note that expansion is done at `start` time, not after
the units are parsed. Using `systemctl show` will just
show the specifiers.
all other dependencies are in 3rd person. Change BindTo= accordingly to
BindsTo=.
Of course, the dependency is widely used, hence we parse the old name
too for compatibility.
Names= is a source of errors, simply because alias names specified like
this only become relevant after a unit has been loaded but cannot be
used to load a unit.
Let's get rid of the confusion and drop this field. To establish alias
names peope should use symlinks, which have the the benefit of being
useful as key to load a unit, even though they are not taken into
account if unit names are listed but they haven't been explicitly
referenced before.
UnitPath= is also writable via native units and may be used by generators
to clarify from which file a unit is generated. This patch also hooks up
the cryptsetup and fstab generators to set UnitPath= accordingly.
This should help making the boot process a bit easier to explore and
understand for the administrator. The simple idea is that "systemctl
status" now shows a link to documentation alongside the other status and
decriptionary information of a service.
This patch adds the necessary fields to all our shipped units if we have
proper documentation for them.
RequiresMountsFor= is a shortcut for adding requires and after
dependencies to all mount units neeed for the specified paths.
This solves a couple of issues regarding dep loop cycles for encrypted
swap.
We finally got the OK from all contributors with non-trivial commits to
relicense systemd from GPL2+ to LGPL2.1+.
Some udev bits continue to be GPL2+ for now, but we are looking into
relicensing them too, to allow free copy/paste of all code within
systemd.
The bits that used to be MIT continue to be MIT.
The big benefit of the relicensing is that closed source code may now
link against libsystemd-login.so and friends.
ConditionPathExists and ConditionFileIsExecutable follow symlinks.
ConditionPathIsDirectory does not follow symlinks.
(XXX: is this actually the desired behavior?)
It was noted on IRC that the current layout is not necessarily the
easiest to parse by humans. I personnally struggled understanding it the
first time I read it.
Hopefully, this change makes it easier to understand.
Note: I only reformatted the information that was already present in the
documentation, I didn't add anything.
The virtualization condition and others use lowercase identifiers, so
for the sake of keeping things least surprising, use lowercase
identifiers here too.
The property StopRetroactively= needs to be per-dependency, not
per-unit, in order to properly express dependencies between .mount units
and its .device and fsck .service units. If the .device unit is
unplugged the mount should go away, but if the fsck process terminates
the .mount should stay.
Some unit shall never be start on user request (e.g. shutdown.target)
others never be stopped on user request (e.g. auditd.servce), hence
offer options for both.