IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
We never used any of the libsysfs convenience features. Here we replace
it completely with 300 lines of code, which are much simpler and a bit
faster cause udev(d) does not open any syfs file for a simple event which
does not need any parent device information.
Signed-off-by: Kay Sievers <kay.sievers@suse.de>
Netlink will never get out-of-order and we just depend on it from
now on. Udevsend messages will have no effect if they contain a
sequence number (SEQNUM).
Thanks to Bastian Blank <waldi@debian.org>, for the debugging session
which identified a bug where the timeouts are not working if
inotify was not available. All the timeout handling is removed
now and this issue should be solved.
Signed-off-by: Kay Sievers <kay.sievers@suse.de>
RUN="socket:<name>" will send the environment in the kernel uevent
format to the named destination. Using the socket instead of the program
to pass the hotplug events to the HAL daemon, cuts down the running
time of udevstart from 0.8 to 0.4 seconds on my box.
env -i ACTION=add DEVPATH=/block/hda/hda1 strace -s10000 ./udev block
sendto(3, "add@/block/hda/hda1\0
ACTION=add\0DEVPATH=/block/hda/hda1\0UDEV_LOG=3\0
ID_TYPE=disk\0ID_MODEL=HTS726060M9AT00\0ID_SERIAL=MRH401M4G6UM9B\0
ID_REVISION=MH4OA6BA\0ID_BUS=ata\0ID_PATH=pci-0000:00:1f.1-ide-0:0\0
ID_FS_USAGE=other\0ID_FS_TYPE=swap\0ID_FS_VERSION=2\0
ID_FS_UUID=9352cfef-7687-47bc-a2a3-34cf136f72e1\0
ID_FS_LABEL=ThisIsSwap\0ID_FS_LABEL_SAFE=ThisIsSwap\0
DEVNAME=/dev/hda1\0"
Signed-off-by: Kay Sievers <kay.sievers@suse.de>
Controls the behavior of the running daemon. Currently only stopping and starting
of the execution queue is supported.
Signed-off-by: Kay Sievers <kay.sievers@suse.de>
If we take over the hotplug call and manage the events we don't need
to call the event fake script in dev.d/. Just set all expected values
to the new network interface name and call hotplug.d/. This way the
device renaming is completely handled inside of udev and userspace
can't get confused.
Make _all_ hotplug variables available to the forked udev,
the udev callouts and the udev dev.d/ scripts. We put the
whole environment into a buffer and send it over the udevd
socket. udevd recreates *envp[] and passes it to the exec().
This makes the udev operation completely lockless by storing a
file for every node in /dev/.udevdb/* This solved the problem
with deadlocking concurrent udev processes waiting for each other
to release the file lock under heavy load.
Change to the same timeout loop we use in the rest of the code. Change
some comments and names to be more descriptive.
I'm mostly finished with the overall cleanup. I will post a new patch
for the udevd-nofork experiment, which will be much smaller now.
On Tue, May 11, 2004 at 04:54:44PM -0700, Greg KH wrote:
> On Tue, May 11, 2004 at 01:16:41PM +0200, Kay Sievers wrote:
> > Hi,
> > the execution of udev depends on the proper fuction of udevd, the
> > serializing daemon. If we can't connect to udevd within a 20 second we
> > give up and the request to create a node is lost. Hope this never happens,
> > but a broken udevd may prevent udev from working.
> >
> > What do you think? Should we call the udev binary directly from udevsend
> > instead of discarding the event? This way we would create the node, regardless
> > of the state of udevd. It would be 20 seconds later and maybe not in the right
> > sequence order - but the node will propably be there.
> >
> > Does it sound sane? What do you think?
>
> That sounds like a good "failsafe" thing to do.
Here we go:
Add a fallback udev call to udevsend. If udevsend is unable to send the
event to udevd, we call the udev binary instead of doing nothing and exiting.
here is a patch on top of your nice improvements.
I fixed the whitespace and it hopefully fixes the stupid timestamp bug in
udevd. Some stupid OS sets the hwclock to localtime and linux changes it
to UTC while starting. If any events are pending they may be delayed by
the users time distance from UTC :) So we use the uptime seconds now.
Here we replace the various fgets() with a mmap() call for the config
file reading, due to the reported performance problems with klibc.
Thanks to Patrick's testing, it makes a very small, close to nothing
speed gain for libc users, but a 6 times speed increase for klibc users
with a 1000 line config file.
I've created a udev_lib.[hc] for this and also moved all the generic
stuff from udev.h in there and uninlined the functions.
Here I try to make the style a bit more consistant in the different
files, so that new patches just copy the 'right' one :)
Some "magic" numbers are replaced and udevtest.c is catched up with udev.
Here we truncate our input strings from the environment to our
defined limit. It's a bit theroretical but better check for it.
It cleans up some magic length definitions and removes the code
duplication in udev, udevtest and udevsend.
udevd needs to be killed after installation, cause the message size
is changed with this patch.
Should we do this with the 'make install', like we do with the '.udevdb'?
On Tue, Feb 24, 2004 at 11:50:52PM +0100, Kay Sievers wrote:
> Here is the first step towards a safer string handling.
> More will follow, but for now only the easy ones :)
>
> Thanks to all who pointed this out. strncat() isn't a nice function. We
> all should remember that the destination string is not terminated if the
> given lenght is shorter than the strlen of the source string.
>
> And shame on the various implementers of strfieldcat() I found in the
> unapplied patches on this list, it's not really better than strncpy()
> and hides the real problem.
Hmm, bk didn't checked in one file, maybe I edited it again as root.
Nevermind, here is the more complete version.
Here is a small improvement. We check for the type of message we receive
and udevsend seems not to need all the credential setup stuff, the
kernel will fill it for us.
udevd now refuses to start as non root, cause it doesn't make any sense.
Here is the badly needed client authorization for udevd.
Since we switched to abstract namespace sockets, we are unable to
control the access of the socket by file permissions.
So here we send a ancillary credential message with every datagram,
to be able to verify the uid of the sender. The sender can't fake the
credentials, cause the kernel doesn't allow it for non root users.
udevd is still working with klibc here :)
On Mon, Feb 09, 2004 at 05:41:15AM +0100, Kay Sievers wrote:
> It seems that today was just another udev-sunday for me :)
>
> Here is a working patch to compile udevd with klibc.
>
> It's sweet the static binary takes 6 kbytes and it runs
> with only 80 kbytes virtual memory.
>
> I changed a few peaces and added a siginterrupt.c file to klibc.
> We may check with hpa to get the changes upstream?
So here is the next try :)
hpa, for good reason, didn't like my changes to klibc.
He will dump signal() completely from klibc instead, so here we switch to
sigaction() and keep udevd working with klibc.
On Fri, Feb 06, 2004 at 01:08:24AM -0500, Chris Friesen wrote:
>
> Kay, you said "unless we can get rid of _all_ the threads or at least
> getting faster, I don't want to change it."
>
> Well how about we get rid of all the threads, *and* we get faster?
Yes, we are twice as fast now on my box :)
> This patch applies to current bk trees, and does the following:
>
> 1) Switch to DGRAM sockets rather than STREAM. This simplifies things
> as mentioned in the previous message.
>
> 2) Invalid sequence numbers are mapped to -1 rather than zero, since
> zero is a valid sequence number (I think). Also, this allows for real
> speed tests using scripts starting at a zero sequence number, since that
> is what the initial expected sequence number is.
>
> 3) Get rid of all threading. This is the biggie. Some highlights:
> a) timeout using setitimer() and SIGALRM
> b) async child death notification via SIGCHLD
> c) these two signal handlers do nothing but raise volatile flags,
> all the
> work is done in the main loop
> d) locking no longer required
I cleaned up the rest of the comments, the whitespace and a few names to match
the whole thing. Please recheck it. Test script is switched to work on subsystem
'test' to let udev ignore it.
It seems that the guys are no longer differ about the right size of the
socket address :)
The kernel simply takes all bytes until the specified length as the name,
so the real length should be enough.
As Chris Friesen <chris_friesen@sympatico.ca> suggested, here we switch
the unix domains socket path to abstract namespace and get rid of the
socket file in the filesystem.
Hey, this was new to me today. So here a few words:
Linux supports a abstract namespace for sockets. We don't need a
physical file on the filesystem but only a unique string magically
starting with the '\0' character.
strace with real file:
connect(3, {sa_family=AF_UNIX, path="/udev/.udevd.sock"}, 110)
strace with abstract namespace:
connect(3, {sa_family=AF_UNIX, path=@udevd}, 110)
This patch allows udevsend to be called by the user and not only by the
kernel with its SEQNUM. If no SEQNUM is given, we move the event straight
to the exec queue and don't look if something is missing.
I don't know if this is really needed, but some people seem trying to
send events trough udevd instead of calling udev directly with their
scripts and confuse the reorder logic with that.
So at least, we may remove this source of confusion and udevsend is much
much faster back than udev itself and it will also block concurrent events
for the same devpath.
> I don't mind udevd using glibc, I just want the programs that get run a
> lot of different times (udev and udevsend) to be as small as possible to
> get the best cache results. As udevd sticks around all the time, it's
> not as important. Sound sane to you?
Oh, nice. Good idea.
> Here is a small cleanup and better Makefile integration.
> udevd and udevsender are now installed. Just switch HOTPLUG_EXEC from ROOT
> to SENDER before install and udevsend will be called.
>
> We may add the location of the socket and lock file to the config,
> if this is needed.
Same patch with a fix for the stack size setting.
