IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Due to the substantial interface changes in cgroup unified hierarchy, new IO
settings are introduced. Currently, IO settings apply only to unified
hierarchy and BlockIO to legacy. While the transition is necessary, it's
painful for users to have to provide configs for both. This patch implements
translation from one config set to another for configs which make sense.
* The translation takes place during application of the configs. Users won't
see IO or BlockIO settings appearing without being explicitly created.
* The translation takes place only if there is no config for the matching
cgroup hierarchy type at all.
While this doesn't provide comprehensive compatibility, it should considerably
ease transition to the new IO settings which are a superset of BlockIO
settings.
v2:
- Update test-cgroup-mask.c so that it accounts for the fact that
CGROUP_MASK_IO and CGROUP_MASK_BLKIO move together. Also, test/parent.slice
now sets IOWeight instead of BlockIOWeight.
Factor out the following functions out of cgroup_context_apply()
* cgroup_context_[blk]io_weight()
* cgroup_apply_[blk]io_device_weight()
* cgroup_apply_[blk]io_device_limit()
This is pure refactoring and shouldn't cause any functional differences.
CGroupBlockIODeviceBandwith is used to keep track of IO bandwidth limits for
legacy cgroup hierarchies. Unlike the unified hierarchy counterpart
CGroupIODeviceLimit, a CGroupBlockIODeviceBandwiddth records either a read or
write limit and has a couple issues.
* There's no way to clear specific config entry.
* When configs are cleared for an IO direction of a unit, the kernel settings
aren't cleared accordingly creating discrepancies.
This patch updates CGroupBlockIODeviceBandwidth so that it behaves similarly to
CGroupIODeviceLimit - each entry records both rbps and wbps limits and is
cleared if both are at default values after kernel settings are updated.
cgroup IO controller supports maximum limits for both bandwidth and IOPS but
systemd resource control currently only supports bandwidth limits. This patch
adds support for IOReadIOPSMax and IOWriteIOPSMax when unified cgroup hierarchy
is in use.
It isn't difficult to also add BlockIOReadIOPS and BlockIOWriteIOPS for legacy
hierarchies but IO control on legacy hierarchies is half-broken anyway, so
let's leave it alone for now.
Currently, there are two cgroup IO limits, bandwidth max for read and write,
and they are hard-coded in various places. This is fine for two limits but IO
is expected to grow more limits - low, high and max limits for bandwidth and
IOPS - and hard-coding each limit won't make sense.
This patch replaces hard-coded limits with an array indexed by
CGroupIOLimitType and accompanying string and default value tables so that new
limits can be added trivially.
This is partial fix for #2228 and #2977, #3204.
bridge-test: netdev ready
docker0: Gained IPv6LL
wlan0: Gained IPv6LL
eth0: Gained IPv6LL
Enumeration completed
bridge-test: netdev exists, using existing without changing its
parameters
vboxnet0: IPv6 enabled for interface: Success
lo: Configured
docker0: Could not drop address: No such process
vboxnet0: Gained carrier
wlan0: Could not drop address: No such process
eth0: Could not drop address: No such process
eth0: Could not drop address: No such process
eth0: Could not drop address: No such process
vboxnet0: Gained IPv6LL
vboxnet0: Could not set NDisc route or address: Invalid argument
vboxnet0: Failed
[New Thread 0x7ffff6505700 (LWP 1111)]
[Thread 0x7ffff6505700 (LWP 1111) exited]
Assertion 'link->state == LINK_STATE_SETTING_ROUTES' failed at
src/network/networkd-link.c:672, function link_enter_configured().
Aborting.
Program received signal SIGABRT, Aborted.
0x00007ffff6dc6a98 in raise () from /lib64/libc.so.6
Missing separate debuginfos, use: dnf debuginfo-install
iptables-1.4.21-15.fc23.x86_64 libattr-2.4.47-14.fc23.x86_64
libidn-1.32-1.fc23.x86_64 pcre-8.38-7.fc23.x86_64
Debugging
(gdb) bt
"link->state == LINK_STATE_SETTING_ROUTES", file=0x5555556a34c8
"src/network/networkd-link.c", line=672,
func=0x5555556a56d0 <__PRETTY_FUNCTION__.14850>
"link_enter_configured") at src/basic/log.c:788
src/network/networkd-link.c:672
src/network/networkd-link.c:720
flags=0 '\000', scope=0 '\000', cinfo=0x7fffffffe020) at
src/network/networkd-address.c:344
(rtnl=0x5555556eded0, message=0x55555570ff20, userdata=0x5555556ec590)
at src/network/networkd-manager.c:604
m=0x55555570ff20) at src/libsystemd/sd-netlink/sd-netlink.c:365
at src/libsystemd/sd-netlink/sd-netlink.c:395
ret=0x0) at src/libsystemd/sd-netlink/sd-netlink.c:429
revents=1, userdata=0x5555556eded0) at
src/libsystemd/sd-netlink/sd-netlink.c:723
src/libsystemd/sd-event/sd-event.c:2268
src/libsystemd/sd-event/sd-event.c:2629
timeout=18446744073709551615) at src/libsystemd/sd-event/sd-event.c:2688
bus=0x5555556eeba0, name=0x55555568a2f5 "org.freedesktop.network1",
timeout=30000000,
check_idle=0x55555556adb6 <manager_check_idle>,
userdata=0x5555556ec590) at src/shared/bus-util.c:134
src/network/networkd-manager.c:1130
src/network/networkd.c:127
(gdb) f 3
src/network/networkd-link.c:672
672 assert(link->state == LINK_STATE_SETTING_ROUTES);
(gdb) p link->state
$1 = LINK_STATE_FAILED
We should not be in this state .
even if vboxnet0 failed we went into this state.
vboxnet0: Could not set NDisc route or address: Invalid argument
vboxnet0: Failed
Add an option to disable appending DHCP option 3 (Router) to the DHCP
OFFER and ACK packets.
This commit adds the boolean option EmitRouter= for the [DHCPServer]
section in .network files.
Rationale: On embedded devices, it is very useful to have a DHCP server
running on an USB OTG ethernet gadget interface to avoid manual setup on
the client PCs, but it should only serve IP addresses, no route(r)s.
Otherwise, Windows clients experience network connectivity issues, due
to them using the address set in DHCP option 3 as default gateway.
Signed-off-by: Clemens Gruber <clemens.gruber@pqgruber.com>
With this change for each setting we say which hierarachy it applies to briefly
in the first sentence of the description, plus in longer form in an extra
pargraph at the end, with a recommendation for the counterpart of the option in
the other hierarchy.
Also adds markup and the "=" suffix to all mentioned settings.
We currently generate log message about unit being started even when
unit was started already and job didn't do anything. This is because job
was requested explicitly and hence became anchor job of the transaction
thus we could not eliminate it. That is fine but, let's not pollute
journal with useless log messages.
$ systemctl start systemd-resolved
$ systemctl start systemd-resolved
$ systemctl start systemd-resolved
Current state:
$ journalctl -u systemd-resolved | grep Started
May 05 15:31:42 rawhide systemd[1]: Started Network Name Resolution.
May 05 15:31:59 rawhide systemd[1]: Started Network Name Resolution.
May 05 15:32:01 rawhide systemd[1]: Started Network Name Resolution.
After patch applied:
$ journalctl -u systemd-resolved | grep Started
May 05 16:42:12 rawhide systemd[1]: Started Network Name Resolution.
Fixes#1723
Private /dev will not be managed by udev or others, so we can make it
noexec and readonly after we have made all device nodes. As /dev/shm
needs to be writable, we can't use bind_remount_recursive().
While creating a VLAN the mac address should be copied from the parent interface, so that
the VLANs inherit the MAC address of the physical interface.
Before:
```
3: wlp3s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
link/ether 00:26:c6:85:a3:c2 brd ff:ff:ff:ff:ff:ff
...
6: vlan1@wlp3s0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether 22:07:73:9d:43:59 brd ff:ff:ff:ff:ff:ff
7: vlan2@wlp3s0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether 46:30:76:33:35:d4 brd ff:ff:ff:ff:ff:ff
```
After:
```
3: wlp3s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
link/ether 00:26:c6:85:a3:c2 brd ff:ff:ff:ff:ff:ff
...
11: vlan1@wlp3s0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether 00:26:c6:85:a3:c2 brd ff:ff:ff:ff:ff:ff
12: vlan2@wlp3s0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether 00:26:c6:85:a3:c2 brd ff:ff:ff:ff:ff:ff
```
v2 of #1573, with fixed commit message.
This patch implements support for the IFLA_BR_MCAST_SNOOPING attribute
it can change the multicast snooping value.
IGMP snooping monitors the Internet Group Management Protocol (IGMP)
traffic between hosts and multicast routers.
It is just an alias for route_free which requires that route is not null,
but it was only used in one place where it was checked that route is not
null anyway. Let's just call route_free instead.
This is now the recommended way to do monitoring by upstream D-Bus.
It's also allowed in the default policy, whereas eavesdrop is not
anymore, which effectively broke busctl on many systems.
unit_set_slice() fails with -EBUSY if the unit already has a slice associated
with it. This makes it impossible to override slice through dropin config or
over dbus. There's no reason to disallow slice changes as long as cgroups
aren't realized. Fix it.
Fixes#3240.
Signed-off-by: Tejun Heo <htejun@fb.com>
Reported-by: Davide Cavalca <dcavalca@fb.com>
This new method returns information by unit names. Instead of ListUnitsByPatterns
this method returns information of inactive and even unexisting units.
Moved dbus unit reply logic into a separate shared function.
Resolves https://github.com/coreos/fleet/pull/1418
Add a synchronization point so that custom initramfs units can run
after the root device becomes available, before it is fsck'd and
mounted.
This is useful for custom initramfs units that may modify the
root disk partition table, where the root device is not known in
advance (it's dynamically selected by the generators).
_const_ means that the caller can assume that the function will return the same
result every time (and will not modify global memory). special_glyph() meets
this: even though it depends on global memory, that part of global memory is
not expected to change. This allows the calls to special_glyph() to be
optimized, even if -flto is not used.
