IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
This reverts commit cb0e818f7c.
After this was merged, some design and implementation issues were discovered,
see the discussion in #18782 and #19385. They certainly can be fixed, but so
far nobody has stepped up, and we're nearing a release. Hopefully, this feature
can be merged again after a rework.
Fixes#19345.
Try to infer the unused memory that a unit can claim before the
memory.max limit is reached, including any limit set on any parent
slice above the unit itself.
This is similar to OnFailure= but is activated whenever a unit returns
into inactive state successfully.
I was always afraid of adding this, since it effectively allows building
loops and makes our engine Turing complete, but it pretty much already
was it was just hidden.
Given that we have per-unit ratelimits as well as an event loop global
ratelimit I feel safe to add this finally, given it actually is useful.
Fixes: #13386
This takes inspiration from PropagatesReloadTo=, but propagates
stop jobs instead of restart jobs.
This is defined based on exactly two atoms: UNIT_ATOM_PROPAGATE_STOP +
UNIT_ATOM_RETROACTIVE_STOP_ON_STOP. The former ensures that when the
unit the dependency is originating from is stopped based on user
request, we'll propagate the stop job to the target unit, too. In
addition, when the originating unit suddenly stops from external causes
the stopping is propagated too. Note that this does *not* include the
UNIT_ATOM_CANNOT_BE_ACTIVE_WITHOUT atom (which is used by BoundBy=),
i.e. this dependency is purely about propagating "edges" and not
"levels", i.e. it's about propagating specific events, instead of
continious states.
This is supposed to be useful for dependencies between .mount units and
their backing .device units. So far we either placed a BindsTo= or
Requires= dependency between them. The former gave a very clear binding
of the to units together, however was problematic if users establish
mounnts manually with different block device sources than our
configuration defines, as we there might come to the conclusion that the
backing device was absent and thus we need to umount again what the user
mounted. By combining Requires= with the new StopPropagatedFrom= (i.e.
the inverse PropagateStopTo=) we can get behaviour that matches BindsTo=
in every single atom but one: UNIT_ATOM_CANNOT_BE_ACTIVE_WITHOUT is
absent, and hence the level-triggered logic doesn't apply.
Replaces: #11340
Let's add an implicit reverse dep OnFailureOf=. This is exposed via the
bus to make things more debuggable: you can now ask systemd for which
units a specific unit is the failure handler.
OnFailure= was the only dependency type that had no inverse, this fixes
that.
Now that deps are a bit cheaper, it should be OK to add deps that only
serve debug purposes.
The slice a unit is assigned to is currently a UnitRef reference. Let's
turn it into a proper dependency, to simplify and clean up code a bit.
Now that new dep types are cheaper, deps should generally be preferable
over everything else, if the concept applies.
This brings one major benefit: we often have to iterate through all unit
a slice contains. So far we iterated through all Before= dependencies of
the slice unit to achieve that, filtering out unrelated units, and
taking benefit of the fact that slice units are implicitly ordered
Before= the units they contain. By making Slice= a proper dependency,
and having an accompanying SliceOf= dependency type, this is much
simpler and nicer as we can directly enumerate the units a slice
contains.
The forward dependency is actually called InSlice internally, since we
already used the UNIT_SLICE name as UnitType field. However, since we
don't intend to expose the dependency to users as dep anyway (we already
have the regular Slice D-Bus property for this) this shouldn't matter.
The SliceOf= implicit dependency type (the erverse of Slice=/InSlice=)
is exported over the bus, to make things a bit nicer to debug and
discoverable.
- Handle BPFProgram= property in string format
"<bpf_attach_type>:<bpffs_path>", e.g. egress:/sys/fs/bpf/egress-hook.
- Add dbus getter to list foreign bpf programs attached to a cgroup.
So far OOMD limits used permyriads, as an upgrade from the original
percent.
The rest of our codebase typically scales stuff relative to UINT32_MAX.
Let's clean this up, an make sure this happens here too. This is
particularly relevant, as this is exposed in unit files and API, and
before we mark this stable we should get the APIs right.
We support two return types for methods that start jobs. EnqueueJob support the
full-monty mode with affected jobs. I didn't do this here, since it seems
unlikely to be used. In the common case there'd be a huge list of jobs and
affected jobs. EnqueueMarkedJobs() just returns a list of jobs that we can wait
upon.
The name of the method is generic in case we decide to add something other than
just reload/restart later on.
When errors occur, resource errors are treated as fatal, but for other error
types we queue up other jobs, and only return an error at the end. The
assumption is that the caller will ignore the result error anyway, so it's
better to try to reload/restart as much as possible.
The property is never set by systemd, only reset after a stop or restart or
reload. It may externally be set to mark the unit for a later restart/reload.
I wasn't sure whether to configure the property only for the types where this
makes sense (Service, Swap, etc). But Restart() method is defined on the unit,
and also having this always under the same property name is more convenient.
Implement directives `NoExecPaths=` and `ExecPaths=` to control `MS_NOEXEC`
mount flag for the file system tree. This can be used to implement file system
W^X policies, and for example with allow-listing mode (NoExecPaths=/) a
compromised service would not be able to execute a shell, if that was not
explicitly allowed.
Example:
[Service]
NoExecPaths=/
ExecPaths=/usr/bin/daemon /usr/lib64 /usr/lib
Closes: #17942.
Allow to setup new bind mounts for a service at runtime (via either
DBUS or a new 'systemctl bind' verb) with a new helper that forks into
the unit's mount namespace.
Add a new integration test to cover this.
Useful for zero-downtime addition to services that are running inside
mount namespaces, especially when using RootImage/RootDirectory.
If a service runs with a read-only root, a tmpfs is added on /run
to ensure we can create the airlock directory for incoming mounts
under /run/host/incoming.
FixedRandomDelay=yes will use
`siphash24(sd_id128_get_machine() || MANAGER_IS_SYSTEM(m) || getuid() || u->id)`,
where || is concatenation, instead of a random number to choose a value between
0 and RandomizedDelaySec= as the timer delay.
This essentially sets up a fixed, but seemingly random, offset for each timer
iteration rather than having a random offset recalculated each time it fires.
Closes#10355
Co-author: Anita Zhang <the.anitazha@gmail.com>
3e5f04bf64 was trying to do the right thing, but
the resulting list does not match the autogenerated order (which is the same as
the order in vtable definition). I assume the addition was done manually. Fix
the order so that dbus-docs-fresh test is not unhappy.
The new methods work as the unflavoured ones, but takes flags as a
single uint64_t DBUS parameters instead of different booleans, so
that it can be extended without breaking backward compatibility.
Add new flag to allow adding/removing symlinks in
[/etc|/run]/systemd/system.attached so that portable services
configuration files can be self-contained in those directories, without
affecting the system services directories.
Use the new methods and flags from portablectl --enable.
Useful in case /etc is read-only, with only the portable services
directories being mounted read-write.
Let's document the discrepancy between the Sec and USec suffixing of
unit files and D-Bus properties at three places: in "systemctl show"
(where it already was briefly mentioned), in the D-Bus interface
description (at one place at least, i.e. the most prominent of
properties that encapsulate time values, there are many more) and in the
general man page explaining time values.
By documenting this at all three places I think we now do as much as we
can do about this highlighting the discrepancy of the naming and the
reasons behind it.
Fixes: #2047
This has the advantage that the executables are always in place and we don't
need any units to exist on the bus, so we can eventually hook this up into
a normal build system. (Probably as a build time check.)
Follow-up for f92c8d1c67.
directives.index:
- This index contains 3398 entries in 19 sections, referring to 333 individual
+ This index contains 4316 entries in 19 sections, referring to 333 individual
