IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Added Cube Mix Plus (i18B) Rotation information.
Also Combined the sensor lines with the different Cube i7 stylus models because they use the same ACCEL_MOUNT_MATRIX
This fixes the following warning:
```
parse_hwdb.py:120: UserWarning: warn_ungrouped_named_tokens_in_collection: setting results name 'SETTINGS*' on And expression collides with 'HZ' on contained expression
dpi_setting = (Optional('*')('DEFAULT') + INTEGER('DPI') + Suppress('@') + INTEGER('HZ'))('SETTINGS*')
```
Not sure about for the mount_matrix, but LGTM.com warns in that line,
and, adding Group() does not change the parse result.
Only some small changes, because we updated recently. As usual, it seems that there are mostly
additions with a smaller amount of corrections, no big removals.
The Lenovo ThinkPad Yoga 11e 360 degree hinges style 2-in-1s use 2
accelerometers, 1 in the display and 1 in the base.
Kernel work is under way to also export the second accelerometer in
the base as an iio-device; and userspace work is underway to use
both accelerometers on 360 degree hinges style 2-in-1s (with 2 accels)
to figure out the angle between the 2 halves.
So far most orientation-matrix quirks have not cared much about the
Z-axis being correct, but in these 2 accelerometer setups getting
the Z-axis correct is important too.
The KIOX010A and KIOX02A ACPI hw-ids (HIDs) are used in 360 degree hinges
style 2-in-1s which have 2 accelerometers, 1 in the display (as usual) and
a second accelerometer in the base.
So far 60-sensor.hwdb has only defined a mount-matrix for the
sensor with the KIOX010A HID, which is the sensor in the display
half of the device. The reason for this is that sofar userspace has
only cared actually used the sensor in the display (for automatic
display rotation. Work is underway to make userspace use both sensors:
https://gitlab.freedesktop.org/hadess/iio-sensor-proxy/-/issues/216
Recently an entry was added for the Medion Akoya's E2221T base-sensor,
but that was added to mark it with ACCEL_LOCATION=base and the entry
simply used the identity-matrix for ACCEL_MOUNT_MATRIX since nothing
is using the mount-matrix info for the second accelerometer.
I believe that this entry was added because on some devices the second
accelerometer gets enumerated first and then iio-sensor-proxy will
wrongly use the second sensor for display-rotation, unless it is marked
with ACCEL_LOCATION=base.
Instead of adding info for the second accelerometer on a per device
basis use the same generic dmi matches as used for the first (KIOX010A)
sensor, replacing the special case added for the E2221T and also
update the ACCEL_MOUNT_MATRIX with the actual mount-matrix for the
KIOX020A sensor in the base of these devices.
This was tested on a Medion Akoya E2228T.
Document how the mount-matrix for the base-accelerometer must be set on
360 degree hinges style 2-in-1s with 2 sensors (one in the display and
1 in the base).
Note the choice to define the lid being fully closed as an angle of
0 degrees is based on the ACPI tables of devices with a BOSC0200
ACPI device-node describing both sensors. In this case the ACPI
tables contain mount-matrix info (and the kernel will soon support
reading this and exporting it to userspace) and the mount-matrices
defined in these ACPI tables are such that the angle of the G-force
vector measured by the sensors is identical for both sensors when
the laptop's lid is fully closed.
This also feels more natural then defining the laptop being fully
open (180 degrees open) as the home / 0 degree angle position.
2 updates to the Logitech MX5000 key mappings:
1. Fix Logitech MX5000 Media key mapping:
The MX5000 has a key clearly marked "media" (in text) and when they gets
pressed the keyboards LCD briefly shows "MEDIA" in a big font.
Yet the keyboard sends a HID usage code which according to the HUTT
is config/control-panel. Map this to media so that the key behaves as
labeled.
2. Add mapping for the scan-code send by the Fn on/off toggle key
The Logitech Dinovo Edge has 5 special hotkeys, one with a phone symbol
and the 4 usual Logitech A-D smartkeys. These send custom Logitech
0xc10xx keycodes, add mappings for these.
Some Logitech wireless keyboards report when there Fn key is pressed,
add a mapping for this.
While it also fix identiation of 2 adjescent key-maps to use tabs like the
other Logitech entries
Dell new Privacy feature provide new hardware level privacy
protect for users,it needs to map the scan code to F20 micmute
Signed-off-by: Perry Yuan <perry_yuan@dell.com>
This is useful for development where overwriting files out side
the configured prefix will affect the host as well as stateless
systems such as NixOS that don't let packages install to /etc but handle
configuration on their own.
Alternative to https://github.com/systemd/systemd/pull/17501
tested with:
$ mkdir inst build && cd build
$ meson \
-Dcreate-log-dirs=false \
-Dsysvrcnd-path=$(realpath ../inst)/etc/rc.d \
-Dsysvinit-path=$(realpath ../inst)/etc/init.d \
-Drootprefix=$(realpath ../inst) \
-Dinstall-sysconfdir=false \
--prefix=$(realpath ../inst) ..
$ ninja install
I tested this on my ZBook Studio G5. I'm not sure if this works for other ZBook studio machines.
I have two more notes on this PR:
- some keys send multiple scancodes. I matched only on one of them, because I couldn't figure out how to match
on all of them. This results in the others still being visible:
Event: time 1604520228.146226, -------------- SYN_REPORT ------------
Event: time 1604520228.151533, type 4 (EV_MSC), code 4 (MSC_SCAN), value db
Event: time 1604520228.151533, type 1 (EV_KEY), code 125 (KEY_LEFTMETA), value 1
Event: time 1604520228.151533, -------------- SYN_REPORT ------------
Event: time 1604520228.259862, type 4 (EV_MSC), code 4 (MSC_SCAN), value 38
Event: time 1604520228.259862, type 1 (EV_KEY), code 56 (KEY_LEFTALT), value 0
Event: time 1604520228.259862, -------------- SYN_REPORT ------------
Event: time 1604520228.259944, type 4 (EV_MSC), code 4 (MSC_SCAN), value 66
Event: time 1604520228.259944, type 1 (EV_KEY), code 218 (KEY_CONNECT), value 0
Event: time 1604520228.259944, -------------- SYN_REPORT ------------
Event: time 1604520228.266513, type 4 (EV_MSC), code 4 (MSC_SCAN), value db
Event: time 1604520228.266513, type 1 (EV_KEY), code 125 (KEY_LEFTMETA), value 0
Event: time 1604520228.266513, -------------- SYN_REPORT ------------
I wanted to set the display key to switchvideomode, but another key is already set to that, so I set it to displaytoggle instead.
Pinebook Pro's display brightness up & down keys do not work until the
keys are mapped to the corresponding codes.
Also, the sleep key is mapped to KEY_POWER code originally. This quirk
maps the sleep key to the KEY_SLEEP code.
This idea comes from the pinebookpro-post-install package [1] of Manjaro
ARM, which is the preloaded OS on Pinebook Pro.
[1]: 7ab1a134ea
This reverts commit c0443b97b7.
I got various cases wrong:
"usb:v04F3p2B7Cd5912dc00dsc00dp00ic03isc00ip00in00"
"usb:v0627p0001:QEMU USB Tablet"
"input:b0003v0627p0001e0001-e0,1,2,4,k110,111,112,r0,1,8,B,am4,lsfw"
OTOH:
-evdev:name:ETPS/2 Elantech Touchpad:dmi:*svnASUSTeKComputerInc.:pnN53SV:*
+evdev:name:ETPS/2 Elantech Touchpad:dmi:*svnASUSTeKComputerInc.:pnN53SV*
is OK. Other parts follow after 'pn'.
-mouse:*:name:*Trackball*:*
-mouse:*:name:*trackball*:*
-mouse:*:name:*TrackBall*:*
+mouse:*:name:*Trackball*:
+mouse:*:name:*trackball*:
+mouse:*:name:*TrackBall*:
... and anything else with :name should be OK too, because our imports always
include ":" at the end:
IMPORT{builtin}="hwdb 'joystick:$env{ID_BUS}:v$attr{id/vendor}p$attr{id/product}:name:$attr{name}:'"
Including '*' at the end makes the pattern work even if we decide to add
something to the match string later.
Fixes#17499.
The properties are not unquoted by udev, so the quotes effectively became part
of the value.
Even though those properties were added quite a while ago
(086c001e29,
d7d31692bf), they never started being used
(because of issues with having multiple layouts), see
https://gitlab.gnome.org/GNOME/mutter/-/issues/906,
https://bugzilla.gnome.org/show_bug.cgi?id=775681.
Let's remove the quotes while we still can.
From https://bugzilla.gnome.org/show_bug.cgi?id=775681#c7:
> Note to self: the values for XKB_FIXED_LAYOUT and XKB_FIXED_VARIANT are
> quoted, meaning that we need to remove the quotes before passing the values
> from udev_device_get_property_value() to xkb_keymap_new_from_names()
> otherwise the compilation of the keymap fails (please don't ask how I found
> out...)
No functional change is intended.
The general pattern of changes:
-usb:v04F3p2B7C*
+usb:v04F3p2B7C:*
This is mostly a clarification, to make the part that makes the usb vXXXXpYYYY
part visually separated. It would only make a difference if we added further
keys with a different number of digits, which is unlikely.
-usb:v0627p0001:*QEMU USB Keyboard*
-usb:v0627p0001:*QEMU USB Mouse*
-usb:v0627p0001:*QEMU USB Tablet*
+usb:v0627p0001:*QEMU USB Keyboard*:*
+usb:v0627p0001:*QEMU USB Mouse*:*
+usb:v0627p0001:*QEMU USB Tablet*:*
Again, only a clarification. We know that ":" will appear somewhere later in
the match key, so anything that matches "…Keyboard*" will also match "…Keyboard*:*".
-evdev:name:ETPS/2 Elantech Touchpad:dmi:*svnASUSTeKComputerInc.:pnN53SV*
+evdev:name:ETPS/2 Elantech Touchpad:dmi:*svnASUSTeKComputerInc.:pnN53SV:*
This makes the match narrower. Previously we would match product "N53SV"
and "N53SV2", "N53SV3", and others. Here we are saying that the ':pn' part must
match exactly. Most of the changes in this patch match this pattern. I made a few
judgement calls and used "pn…*:*" when I wasn't sure if the full pn is included:
-evdev:name:Dell WMI hotkeys:dmi:bvn*:bvr*:bd*:svnDell*:pnPrecision*
+evdev:name:Dell WMI hotkeys:dmi:bvn*:bvr*:bd*:svnDell*:pnPrecision*:*
-evdev:name:Cypress APA Trackpad ?cyapa?:dmi:*:svnHewlett-Packard*:pnFalco*:
+evdev:name:Cypress APA Trackpad ?cyapa?:dmi:*:svnHewlett-Packard*:pnFalco*:*
This more like the "QEMU" example above, since all dmi strings end in ":", so
anything which matches the old version will also match the new version.
-evdev:atkbd:dmi:bvn*:bvr*:bd*:svnGateway*:pnA0A1*:pvr*
+evdev:atkbd:dmi:bvn*:bvr*:bd*:svnGateway*:pnA0A1*:*
I replaced trailing ":pvr*" by ":*". This makes no functional difference because
we expect "pvr" to always appear in the dmi string. This makes patterns shorter.
-evdev:atkbd:dmi:bvn*:bvr*:bd*:svnAcer*:pn*
+evdev:atkbd:dmi:bvn*:bvr*:bd*:svnAcer*:pn*:*
OTOH, ":pn*" is kept. This is because almost patterns include ":pn*", and if we
skip it, we should make it clear that this is on purpose, that we really want to
match any product name.
The python script to generate autosuspend rules is updated to use ":*" too.
Inspired by https://github.com/systemd/systemd/pull/17281#discussion_r501489750.
I'm keeping this part separate because a function change is intended here.
Those patterns didn't match:
$ systemd-hwdb query 'evdev:atkbd:dmi:bvn_:bvr_:bd_:svnLENOVO:pn_:pvrThinkPadT430s'
KEYBOARD_LED_CAPSLOCK=0
$ systemd-hwdb query 'evdev:atkbd:dmi:bvn_:bvr_:bd_:svnLENOVO:pn_:pvrThinkPadT430s:'
(nil)