IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
journalctl --unit= already did this, and allows you to tail all the logs
for a certain slice easily. It seemed only natural to make --user-unit
behave in a similar way.
The _SYSTEMD_USER_SLICE field was not documented as being added by
journald, so I have added that to the documentation too.
Furthermore, I have documented the existing behaviour of --unit= and the
new behaviour of --user-unit=
The behaviour was actually not documented before, so I am also OK with
removing the match for the --unit= command instead. The user would then
have to manually provide _SYSTEMD_SLICE= filter to journalctl in both
cases. Both options work for me.
The "include" files had type "book" for some raeason. I don't think this
is meaningful. Let's just use the same everywhere.
$ perl -i -0pe 's^..DOCTYPE (book|refentry) PUBLIC "-//OASIS//DTD DocBook XML V4.[25]//EN"\s+"http^<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN"\n "http^gms' man/*.xml
No need to waste space, and uniformity is good.
$ perl -i -0pe 's|\n+<!--\s*SPDX-License-Identifier: LGPL-2.1..\s*-->|\n<!-- SPDX-License-Identifier: LGPL-2.1+ -->|gms' man/*.xml
The option cursor-file takes a filename as argument. If the file exists and
contains a valid cursor, this is used to start the output after this position.
At the end, the last cursor gets written to the file.
This allows for an easy implementation of a timer that regularly looks in the
journal for some messages.
journalctl --cursor-file err-cursor -b -p err
journalctl --cursor-file audit-cursor -t audit --grep DENIED
Or you might want to walk the journal in steps of 10 messages:
journalctl --cursor-file ./curs -n10 --since=today -t systemd
In the default journalctl output, unprintable entries are abbreviated as
“[<amount> blob data]”; using the same term in the documentation helps
users to quickly discover the option they need to add in order to see
those entries.
Also, while we are at it, beef it up, by adding json-seq support (i.e.
https://tools.ietf.org/html/rfc7464). This is particularly useful in
conjunction with jq's --seq switch.
Let's remove redundancy and not advertise "journalctl --new-id128"
anymore, now that we have "systemd-id128 new" in a proper tool.
This allows us to reduce the overly large journalctl command set a bit.
Note that this just removes the --help and man text, the call remains
available for compat reasons.
Docbook styles required those to be present, even though the templates that we
use did not show those names anywhere. But something changed semi-recently (I
would suspect docbook templates, but there was only a minor version bump in
recent years, and the changelog does not suggest anything related), and builds
now work without those entries. Let's drop this dead weight.
Tested with F26-F29, debian unstable.
$ perl -i -0pe 's/\s*<authorgroup>.*<.authorgroup>//gms' man/*xml
These lines are generally out-of-date, incomplete and unnecessary. With
SPDX and git repository much more accurate and fine grained information
about licensing and authorship is available, hence let's drop the
per-file copyright notice. Of course, removing copyright lines of others
is problematic, hence this commit only removes my own lines and leaves
all others untouched. It might be nicer if sooner or later those could
go away too, making git the only and accurate source of authorship
information.
This part of the copyright blurb stems from the GPL use recommendations:
https://www.gnu.org/licenses/gpl-howto.en.html
The concept appears to originate in times where version control was per
file, instead of per tree, and was a way to glue the files together.
Ultimately, we nowadays don't live in that world anymore, and this
information is entirely useless anyway, as people are very welcome to
copy these files into any projects they like, and they shouldn't have to
change bits that are part of our copyright header for that.
hence, let's just get rid of this old cruft, and shorten our codebase a
bit.
When dealing with a large number of template instances, for example
when launching daemons per VRF, it is hard for operators to correlate
log lines to arguments.
Add a new with-unit mode which, if available, prefixes unit and user
unit names when displaying its log messages instead of the syslog
identifier. It will also use the full timestamp with timezones, like
the short-full mode.
Files which are installed as-is (any .service and other unit files, .conf
files, .policy files, etc), are left as is. My assumption is that SPDX
identifiers are not yet that well known, so it's better to retain the
extended header to avoid any doubt.
I also kept any copyright lines. We can probably remove them, but it'd nice to
obtain explicit acks from all involved authors before doing that.
Fixes#5387.
I kept the _SYSTEMD_UNIT= example because it is easy to understand and
not very verbose. _SYSTEMD_CGROUP has much longer entries which do not
fit well in the narrow man page. Instead, I added an explanation of what
-u is translated into.
Case sensitive or case insensitive matching can be requested using
--case-sensitive[=yes|no].
Unless specified, matching is case sensitive if the pattern contains any
uppercase letters, and case insensitive otherwise. This matches what
forward-search does in emacs, and recently also --ignore-case in less. This
works surprisingly well, because usually when one is wants to do case-sensitive
matching, the pattern is usually camel-cased. In the less frequent case when
case-sensitive matching is required with an all-lowercase pattern,
--case-sensitive can be used to override the automatic logic.
This option allows restricting the shown fields in the output modes that
would normally show all fields. It allows clients that are only
interested in a subset of the fields to access those more efficiently.
Also, it makes the resulting size of the output more predictable.
It has no effect on the various `short` output modes, because those
already only show a subset of the fields.
As requested in
https://github.com/systemd/systemd/pull/4864#pullrequestreview-12372557.
docbook will substitute triple dots for the ellipsis in man output, so this has
no effect on the troff output, only on HTML, making it infinitesimally nicer.
In some places we show output from programs, which use dots, and those places
should not be changed. In some tables, the alignment would change if dots were
changed to the ellipsis which is only one character. Since docbook replaces the
ellipsis automatically, we should leave those be. This patch changes all other
places.
It is useful to look at a (possibly inactive) container or other os tree
with --root=/path/to/container. This is similar to specifying
--directory=/path/to/container/var/log/journal --directory=/path/to/container/run/systemd/journal
(if using --directory multiple times was allowed), but doesn't require
as much typing.
This new output mode formats all timestamps using the usual format_timestamp()
call we use pretty much everywhere else. Timestamps formatted this way are some
ways more useful than traditional syslog timestamps as they include weekday,
month and timezone information, while not being much longer. They are also not
locale-dependent. The primary advantage however is that they may be passed
directly to journalctl's --since= and --until= switches as soon as #3869 is
merged.
While we are at it, let's also add "short-unix" to shell completion.
* Specifying a device node has an effect much larger than a simple shortcut
for a field/value match, so the original sentence is no longer a good way
to start the paragraph.
* Specifying a device node causes matches to be generated for all ancestor
devices of the device specified, not just its parents.
* Indicates that the path must be absolute, but that it may be a link.
* Eliminates a few typos.
* man: change time unit specifier for minutes to "m", not "min".
To alert the reader to the fact that the ambiguous prefix "m" will be
interpreted as minutes, not months.
* man: change 'journal files' to 'archived journal files'.
So that the user may be reminded why they see log entries in the journal
from a time previous to the one they specified when using --vacuum-time.
Of course, ideally we'd just use normal synchronous bus calls, but this
is out of the question as long as we rely on dbus-daemon (which logs to
journald, and thus cannot use to avoid cyclic sync loops). Hence,
instead, reuse the wait logic already implemented for --sync, and use a
signal in one direction, and a mtime watch file for the reply.
With this new "--sync" switch we add a synchronous way to sync
everything queued to disk, and return only after that's complete. This
command gives the guarantee that anything queued before has hit the disk
before the command returns.
While we are at it, also improve the man pages and help text for
journalctl a bit.
