IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
IIUC, pipefail doesn't matter for a sequence of commands joined with &&, and we
don't have any pipes. And such a failing expression also does not trigger an
exit, so the set +e/set -e were noops.
(cherry picked from commit 13391986b5)
A bind mount is added directly from private on the host to the actual
destination directory, no need for the symlinks (which cannot be created
as the bind mount happens first and creates the target as an actual directory)
Fixes https://github.com/systemd/systemd/issues/22264
(cherry picked from commit 3fa80e5e75)
Conflicts:
test/units/testsuite-50.sh
Otherwise we might hit a window where the coredump happens before
midnight, but we check for it after midnight, which yields no results.
E.g.:
```
$ coredumpctl --no-legend --no-pager --file system.journal
Wed 2022-01-05 01:00:06 CET 359 0 0 SIGABRT journal /usr/bin/udevadm n/a
$ coredumpctl --since 23:59:55 --no-legend --no-pager --file system.journal
No coredumps found.
$ coredumpctl --since "2022-01-04 23:59:59" --no-legend --no-pager --file system.journal
Wed 2022-01-05 01:00:06 CET 359 0 0 SIGABRT journal /usr/bin/udevadm n/a
```
(cherry picked from commit 1b51599f29)
The user may be busy when auto-rebalancing the user's home device.
Workaround for #21589.
---
Dec 01 15:03:15 H systemd-homework[1078]: Provided password unlocks user record.
Dec 01 15:03:15 H systemd-homework[1078]: Image file '/home/test-user.home' already locked, can't use.
Dec 01 15:03:15 H systemd-homed[240]: Worker reported error code EADDRINUSE.
Dec 01 15:03:15 H systemd-homed[240]: Activation failed: Address already in use
---
When conditions fail on a service unit, a path unit can cause
PID 1 to busy loop as it keeps trying to activate the service unit.
To avoid this from happening, add a trigger limit to the path unit,
identical to the trigger limit we have for socket units.
Initially, let's start with a high limit and not make it configurable.
If needed, we can add properties to configure the rate limit similar
to the ones we have for socket units.
On some runs `sleep infinity` run by the user manager uses over 3M of
memory, which is higher than the MemoryHigh= set on testbloat and
testmunch. If no pgscan is generated, then systemd-oomd sorts by memory
usage which leads to a situation where testchill (using 3M) could be
targeted over testbloat (1M-2M).
Fix this by setting reasonable MemoryHigh= values for all of these test
units. Even if somehow testchill throttles a bit at 3M, testbloat and
testmunch should still be trying to use over 100M at memory and will
throttle down to 5M and 6M with the new values. This should reflect
the desired state in pgscan and memory usage during the test run.
Fixes#21684
The openssl binary is an optional dependency.
If systemd has been built with OpenSSL support, we want to test its
OpenSSL functionality.
So record a failure message in /failed if the binary is missing.
See https://github.com/systemd/systemd/pull/21724#issuecomment-992707614
Otherwise we might miss the "Device path too long" message:
```
[ 21.083274] testsuite-64.sh[374]: swapoff /dev/vda1
[ 21.089841] testsuite-64.sh[376]: ++ mktemp
[ 21.095115] testsuite-64.sh[271]: + logfile=/tmp/tmp.a1MULA35wL
[ 21.095115] testsuite-64.sh[271]: + journalctl -b -q --no-pager -o short-monotonic -p info --grep 'Device path.*vda.?'\'' too long to fit into unit name'
...
[ 21.277360] systemd[1]: testsuite-64.service: Main process exited, code=exited, status=1/FAILURE
[ 21.277508] systemd[1]: testsuite-64.service: Failed with result 'exit-code'.
...
[ 21.323500] systemd[1]: Device path '/sys/devices/pci0000:00/0000:00:03.0/0000:01:00.0/0000:02:00.0/0000:03:00.0/0000:04:00.0/0000:05:00.0/0000:06:00.0/0000:07:00.0/0000:08:00.0/0000:09:00.0/0000:0a:00.0/0000:0b:00.0/0000:0c:00.0/0000:0d:00.0/0000:0e:00.0/0000:0f:00.0/0000:10:00.0/0000:11:00.0/0000:12:00.0/0000:13:00.0/0000:14:00.0/0000:15:00.0/0000:16:00.0/0000:17:00.0/0000:18:00.0/0000:19:00.0/0000:1a:00.0/virtio0/block/vda/vda1' too long to fit into unit name, ignoring device.
```
This fixes the following warning:
-----
In /github/workspace/test/units/testsuite-62.sh line 39:
KERNEL_MINOR="${KERNEL_VERSION#$KERNEL_MAJOR.}"
^-----------^ SC2295 (info): Expansions inside ${..} need to be quoted separately, otherwise they match as patterns.
Did you mean:
KERNEL_MINOR="${KERNEL_VERSION#"$KERNEL_MAJOR".}"
Writing a byte to test10.socket is actually the root cause of issue #19154:
depending on the timing, it's possible that PID1 closes the socket before socat
(or nc, it doesn't matter which tool is actually used) tries to write that one
byte to the socket. In this case writing to the socket returns EPIPE, which
causes socat to exit(1) and subsequently make the test fail.
Since we're only interested in connecting to the socket and triggering the rate
limit of the socket, this patch removes the parts that write the single byte to
the socket, which should remove the race for good.
Since it shouldn't matter whether the test uses socat or nc, let's switch back
to nc and hence remove the sole user of socat. The exit status of nc is however
ignored because some versions might choke when the socket is closed
unexpectedly.
This commit adds a function which converts a bus message containing the
environment variables to a JSON object and uses this function to support
JSON formatted output for the "systemctl show-environment" command.
Fixes#21348
Allows to pass a portable profile when doing offline analysis of
units. Especially useful for analyzing portable images, since a
lot of the security-relevant settings in those cases come from
the profiles, but they are not shipped in the portable images.
Make oomctl a bit less likely to race with systemd-oomd receiving the
managed oom cgroup info by checking oomctl output in a loop with
timeout.
Fixes#21146
The test was changed at @bluca 's request to avoid sleeps,
but the change insufficient to avoid all races.
The kill command is now run from the script itself to avoid using
ExecStartPost
All our D-Bus services support the LogControl1 API, but homed didn't so
far. Fix that, and make use of it in the test case, to make debugging it
easier.
ASan is having a hard time to get its LD_PRELOAD= shenanigans straight
with all the shells flying around. Let's make it a bit easier by using
one of the nifty systemctl's features instead.
This moves the backing store to a separate tmpfs which we can nicely put
a size limit on to make sure we can test maximization sanely: if we ask
for the home dir to be grown really large it should effectively only be
grown until the size of the backing tmpfs.
(While we are at it, also set a cheaper KDF so that we don't waste CI
cycles for password hashing that aren#t secure anyway.)
Since the GNU `diff` utility uses grep-style regular expressions[0], which
use the BRE style, we need to tweak the regex to make it work properly
(most notably - in BRE the meta characters need to be escaped).
```
$ diff a b
21c21
< Volume Key: 256bit
---
> Volume Key: 257bit
25c25
< Disk Ceiling: 323.2M
---
> Disk Ceiling: 323.1M
$ diff -I '^\s*Disk (Size|Free|Floor|Ceiling):' a b
21c21
< Volume Key: 256bit
---
> Volume Key: 257bit
25c25
< Disk Ceiling: 323.2M
---
> Disk Ceiling: 323.1M
$ diff -I '^\s*Disk \(Size\|Free\|Floor\|Ceiling\):' a b && echo OK
21c21
< Volume Key: 256bit
---
> Volume Key: 257bit
```
Caught in one of the nightly CentOS CI cron jobs.
[0] https://www.gnu.org/software/diffutils/manual/html_node/Specified-Lines.html
systemd-run --scope --user failed to run in system 249.6, cf. #21297. Add tests
for systemd-run --scope and systemd-run --scope --user to make sure this does
not regress again.
This introduces `ExitType=main|cgroup` for services.
Similar to how `Type` specifies the launch of a service, `ExitType` is
concerned with how systemd determines that a service exited.
- If set to `main` (the current behavior), the service manager will consider
the unit stopped when the main process exits.
- The `cgroup` exit type is meant for applications whose forking model is not
known ahead of time and which might not have a specific main process.
The service will stay running as long as at least one process in the cgroup
is running. This is intended for transient or automatically generated
services, such as graphical applications inside of a desktop environment.
Motivation for this is #16805. The original PR (#18782) was reverted (#20073)
after realizing that the exit status of "the last process in the cgroup" can't
reliably be known (#19385)
This version instead uses the main process exit status if there is one and just
listens to the cgroup empty event otherwise.
The advantages of a service with `ExitType=cgroup` over scopes are:
- Integrated logging / stdout redirection
- Avoids the race / synchronisation issue between launch and scope creation
- More extensive use of drop-ins and thus distro-level configuration:
by moving from scopes to services we can have drop ins that will affect
properties that can only be set during service creation,
like `OOMPolicy` and security-related properties
- It makes systemd-xdg-autostart-generator usable by fixing [1], as obviously
only services can be used in the generator, not scopes.
[1] https://bugs.kde.org/show_bug.cgi?id=433299
