IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
The new methods work as the unflavoured ones, but takes flags as a
single uint64_t DBUS parameters instead of different booleans, so
that it can be extended without breaking backward compatibility.
Add new flag to allow adding/removing symlinks in
[/etc|/run]/systemd/system.attached so that portable services
configuration files can be self-contained in those directories, without
affecting the system services directories.
Use the new methods and flags from portablectl --enable.
Useful in case /etc is read-only, with only the portable services
directories being mounted read-write.
Let's make sure the sd_listen_fd() docs are really found from the
.socket file documentation as well as the FileDescriptorStoreMax=
documentation.
Let's also emphasize that that's where the order in which the fds are
passed are documented.
Fixes: #16647
I started working on a command-line switch to show passwords also in
"pretty" mode. I can submit that code for review if anyone thinks that
woul be useful, but after writing the man page I realized that it's a
fairly niche case, and the hint in the man page is a sufficient
replacement.
Let's document the discrepancy between the Sec and USec suffixing of
unit files and D-Bus properties at three places: in "systemctl show"
(where it already was briefly mentioned), in the D-Bus interface
description (at one place at least, i.e. the most prominent of
properties that encapsulate time values, there are many more) and in the
general man page explaining time values.
By documenting this at all three places I think we now do as much as we
can do about this highlighting the discrepancy of the naming and the
reasons behind it.
Fixes: #2047
This makes use of the developer mode switch: the test is only done
if the user opted-in into developer mode.
Before the man/update-dbus-docs was using the argument form where
we don't need to run find_command(), but that doesn't work with test(),,
so find_command() is used and we get one more line in the config log.
The fix from cb263973ac was made the other way around,
i.e. `SIGKILL` was changed to `SIGUSR1`, but the sentence is about a "termination signal", i.e. `SIGKILL`, not `SIGUSR1`.
Commands like build/man/man journald.conf.d would show the installed
man page (or an error if the page cannot be found in the global search
path), and not the one in the build directory. If the man page is
a redirect, or the .html is a symlink, resolve it, build the target,
and show that.
Follow the same model established for RootImage and RootImageOptions,
and allow to either append a single list of options or tuples of
partition_number:options.
The concept is flawed, and mostly useless. Let's finally remove it.
It has been deprecated since 90a2ec10f2 (6
years ago) and we started to warn since
55dadc5c57 (1.5 years ago).
Let's get rid of it altogether.
Timestamps for unit start/stop are recorded with microsecond granularity,
but status and show truncate to second granularity by default.
Add a --timestamp=pretty|us|utc option to allow including the microseconds
or to use the UTC TZ to all timestamps printed by systemctl.
Apparently both Fedora and suse default to btrfs now, it should hence be
good enough for us too.
This enables a bunch of really nice things for us, most importanly we
can resize home directories freely (i.e. both grow *and* shrink) while
online. It also allows us to add nice subvolume based home directory
snapshotting later on.
Also, whenever we mention the three supported types, alaways mention
them in alphabetical order, which is also our new order of preference.
The description didn't really explain how the distribution mechanism
works exactly and the relationship of leaf and slice units.
Update the documentation and also explicitly explain the expected
behaviour as it is created by the memory_recursiveprot cgroup2 mount
option.
This comes up occasionally with new users. The phrase "Logs begin ..." is
ambiguous because it can be taken to mean the logs being displayed or all logs
(the intended meaning). Let's rephrase this as "Journal begins ..." to make
this clearer.
I am pretty sure /etc/hosts (i.e. an explicitly configured, local,
trusted database) should be useful for overriding the automatic
myhostname logic.
resolved's internal logic handles it that way and hence we should
suggest it in the NSS fallback line, too.
Let's also bring the factory file back into sync with what the docs say.
And update the prose a bit too, to actually match what we recommend.
Follows the same pattern and features as RootImage, but allows an
arbitrary mount point under / to be specified by the user, and
multiple values - like BindPaths.
Original implementation by @topimiettinen at:
https://github.com/systemd/systemd/pull/14451
Reworked to use dissect's logic instead of bare libmount() calls
and other review comments.
Thanks Topi for the initial work to come up with and implement
this useful feature.
99e015e28c missed to update the example
below - DHCPv6.AssignAcquiredDelegatedPrefixAddress was moved to
DHCPv6PrefixDelegation.Assign.
As it already defaulted to true since it's introduction in
9efa8a3cff, there's no need to explicitly
list it at all.
Allows to specify mount options for RootImage.
In case of multi-partition images, the partition number can be prefixed
followed by colon. Eg:
RootImageOptions=1:ro,dev 2:nosuid nodev
In absence of a partition number, 0 is assumed.
There are a lot of edge cases that the current implementation
doesn't handle, especially in cases where one of passwd/shadow
exists and the other doesn't exist. For example, if
--root-password is specified, we will write /etc/shadow but
won't add a root entry to /etc/passwd if there is none.
To fix some of these issues, we constrain systemd-firstboot to
only modify /etc/passwd and /etc/shadow if both do not exist
already (or --force) is specified. On top of that, we calculate
all necessary information for both passwd and shadow upfront so
we can take it all into account when writing the actual files.
If no root password options are given --force is specified or both
files do not exist, we lock the root account for security purposes.
This reverts commit 0b57803630.
From https://github.com/systemd/systemd/pull/16503#issuecomment-660212813:
systemd-vconsole-setup (the binary) is supposed to run asynchronously by udev
therefore ordering early interactive services after systemd-vconsole-setup.service
has basically no effect.
Let's remove this paragraph. It's better to say nothing than to give pointless
advice.
Let's use the new flag wherever we read key material/passphrases/hashes
off disk, so that people can plug in their own IPC service as backend if
they like, easily.
(My main goal was actually to support this for crypttab key files — i.e.
that you can specify AF_UNIX sockets as third column in crypttab — but
that's harder to implement, since the keys are read via libcryptsetup's
API, not ours.)
967de8face added a note that I found very hard
to understand. Reword it, and also describe how IMPORT and PROGRAM are different
from RUN.
Minor markup adjustements too.
This only sets the environment for user *services*, it has no effect on
sessions, as those get an env block set up by whatever program sets them
up and not systemd.
Now that we make the user/group name resolving available via userdb and
thus nss-systemd, we do not need the UID/GID resolving support in
nss-mymachines anymore. Let's drop it hence.
We keep the module around, since besides UID/GID resolving it also does
hostname resolving, which we care about. (One of those days we should
replace that by some Varlink logic between
nss-resolve/systemd-resolved.service too)
The hooks are kept in the NSS module, but they do not resolve anything
anymore, in order to keep compat at a maximum.
Add support for creating a MACVLAN interface in "source" mode by
specifying Mode=source in the [MACVLAN] section of a .netdev file.
A list of allowed MAC addresses for the corresponding MACVLAN can also
be specified with the SourceMACAddress= option of the [MACVLAN] section.
An example .netdev file:
[NetDev]
Name=macvlan0
Kind=macvlan
MACAddress=02:DE:AD:BE:EF:00
[MACVLAN]
Mode=source
SourceMACAddress=02:AB:AB:AB:AB:01 02:CD:CD:CD:CD:01
SourceMACAddress=02:EF:EF:EF:EF:01
The same keys can also be specified in [MACVTAP] for MACVTAP kinds of
interfaces, with the same semantics.
For users, the square brackets already serve as markup and clearly delineate
the section name from surrounding text. Putting additional markup around that
only adds clutter. Also, we were very inconsistent in using the quotes. Let's
just drop them altogether.
If an entry in fstab uses "x-systemd.automount" option and also asks for
additionnal dependencies via x-systemd.requires or such, then the dependencies
were applied to the automount unit.
But this unlikely to do the right thing and is inconsistent with what's done
for network mounts.
Indeed when an fstab entries has "_netdev,x-systemd.automount" options, the
dependencies against the network requested by "_netdev" are (correctly) applied
to the mount unit only and the automount unit remains ordered against
local-fs.target.
The same logic should be followed when extra deps are specified via the mount
options as automount units should always be ordered against local-fs.target.
Note: in general explicit deps specified via mount options should be used with
care and should be used to specify dependencies on other mount units only as it
can easily create ordering cycles otherwise like it's been seen in
https://github.com/systemd/systemd-stable/issues/69. Mount units (as well as
automount ones) are ordered before local-fs.target by default which is a
low-level target that most other units depend on.
SR-IOV provides the ability to partition a single physical PCI
resource into virtual PCI functions which can then be injected in
to a VM. In the case of network VFs, SR-IOV improves north-south n
etwork performance (that is, traffic with endpoints outside the
host machine) by allowing traffic to bypass the host machine’s network stack.
This allows copying in arbitrary file systems on the block level into
newly created partitions.
Usecase: simple replicating OS installers or OS image builders.
Since kernel 5.2, netdevsim creation/destruction via netlink is removed.
So, let's remove the netdevsim support from our documents.
See below commit for more details.
e05b2d141f
Since cryptsetup 2.3.0 a new API to verify dm-verity volumes by a
pkcs7 signature, with the public key in the kernel keyring,
is available. Use it if libcryptsetup supports it.
https://tools.ietf.org/html/draft-knodel-terminology-02https://lwn.net/Articles/823224/
This gets rid of most but not occasions of these loaded terms:
1. scsi_id and friends are something that is supposed to be removed from
our tree (see #7594)
2. The test suite defines an API used by the ubuntu CI. We can remove
this too later, but this needs to be done in sync with the ubuntu CI.
3. In some cases the terms are part of APIs we call or where we expose
concepts the kernel names the way it names them. (In particular all
remaining uses of the word "slave" in our codebase are like this,
it's used by the POSIX PTY layer, by the network subsystem, the mount
API and the block device subsystem). Getting rid of the term in these
contexts would mean doing some major fixes of the kernel ABI first.
Regarding the replacements: when whitelist/blacklist is used as noun we
replace with with allow list/deny list, and when used as verb with
allow-list/deny-list.