IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Now, actually check if the environment variable names and values used
are valid, before accepting them. With this in place are at some places
more rigid than POSIX, and less rigid at others. For example, this code
allows lower-case environment variables (which POSIX suggests not to
use), but it will not allow non-UTF8 variable values.
All in all this should be a good middle ground of what to allow and what
not to allow as environment variables.
(This also splits out all environment related calls into env-util.[ch])
After d848b9cbfa 'Move generic specifier functions to shared' libudev
depends (through) libsystemd-shared.la on libsystemd-id128.so. The
problem only appears when the linker does not support --gc-sections
and manifests itself as the inability to resolve sd_id128_get_machine
and other libsystemd-id128 functions, which aren't really used.
In other cases where multiple directories are searched for unit files,
the list of directories is described in the man page describing the
format. I think this makes sense too in case of systemd directories,
since the systemd(1) manpage already has an overview of many different
topics.
man rules were repeating the same information in too many places,
which was error prone. Those rules can be easily generated from .xml
files. For efficiency and because python is not a required dependency,
Makefile-man.am is only regenerated when requested with
make update-man-list
If no metadata in man/*.xml changed, this file should not change. So
only when a new man page or a new alias is added, this file should
show up in 'git diff'. The change should then be committed.
If the support for building from git without python was dropped, we
could drop Makefile-man.am from version control. This would also
increase the partial build time (since more stuff would be rebuild
whenever sources in man/*.xml would be modified), so it would probably
wouldn't be worth it.
adds test of:
strv_find
strv_find_prefix
strv_overlap
strv_sort
streq_ptr
first_word
Splits tests of util.c into own file to avoid clutter as we add more.
Removed a few prints and uses _cleanup_free_ to make the tests more focused.
Sometimes it is useful to look at them, and they don't take
up any significant amount of space. Keeping them also avoids
the message about files being removed at the end of make
run.
This allows one templated unit to refer to another templated unit
at installation time.
Examples:
> grep WantedBy ~/.config/systemd/user/mpop@.timer
WantedBy=services@%i.target
> srv disable mpop@iit.timer
rm '/home/alxchk/.config/systemd/user/services@iit.target.wants/mpop@iit.timer'
> srv enable mpop@iit.timer
ln -s '/home/alxchk/.config/systemd/user/mpop@.timer' '/home/alxchk/.config/systemd/user/services@iit.target.wants/mpop@iit.timer'
Based-on-patch-by: Oleksii Shevchuk <alxchk@gmail.com>
New sections are added: PAM options, crypttab options, commandline
options, miscellaneous. The last category will be used for all
untagged <varname> elements.
Commandline options sections is meant to be a developer tool: when
adding an option it is sometimes useful to be able to check if
similarly named options exist elsewhere.
Based-on-patch-by: Thomas Jarosch <thomas.jarosch@intra2net.com>
cppcheck reported:
[src/bootchart/svg.c:791]: (error) Mismatching allocation and deallocation: f
The idea is to make Makefile.am more declarative and avoid
repetitions. Redeclaring unit links as variables also makes
it easier to conditionally install only some of them.
In the x32 ABI, syscall numbers start at 0x40000000. Mask that bit on
x32 for lookups in the syscall_names array and syscall_filter and ensure
that syscall.h is parsed correctly.
[zj: added SYSCALL_TO_INDEX, INDEX_TO_SYSCALL macros.]
This allows us to print simple performance data of all parts of the boot now:
- firmware
- boot loader
- kernel
- initrd
- userspace
This only works for bootloaders which support passing TSC data via EFI
variables. As of now that's only gummiboot.
We no longer allow early-boot init scripts, however in late boot the
syslog socket and local mounts are established anyway, so let's simplify
our dep graph a bit.
If $syslog doesn't resolve to syslog.target anymore there's no reason to
keep syslog.target around anymore. Let's remove it.
Note that many 3rd party service unit files order themselves after
syslog.target. These will be dangling dependencies now, which should be
unproblematic, however.
New file output.h with output flags and modes.
--full parameter also for cgls and loginctl.
Include 'all' parameter in flags (show_cgroup_by_path, show_cgroup,
show_cgroup_and_extra, show_cgroup_and_extra_by_spec).
get_process_cmdline with max_length == 0 will not ellipsize output.
Replace LINE_MAX with 0 in some calls of get_process_cmdline.
[zj: Default to --full when under pager for clgs.
Drop '-f' since it wasn't documented and didn't actually work.
Reindent a bit.
]
Systemd should not introduce any new facilities. Distributions which still
need to support their non-standard/legacy facilities should add them as
patches to their packaging.
The following facilities are no longer recognized:
$x-display-manager
$mail-transfer-agent
$mail-transport-agent
$mail-transfer-agent
$smtp
$null
This target is no longer available:
mail-transfer-agent.target
This way we also get a man page. The output is not as polished.
I hope that it doesn't matter too much.
index.html is not generated now, the page is called
systemd.index.html. If necessary, an install hook should be added.
Bootchart is renamed to 'systemd-bootchart' and installed as
/usr/lib/systemd/systemd-bootchart. The configuration file
will reside in /etc/systemd/bootchart.conf.
Define KEEP_LA_FILES to keep them.
The hook is repeated because both install-exec-hook and
install-data-hook can install libraries and with parallel make
it's not possible to predict which one will run first.
http://lists.freedesktop.org/archives/systemd-devel/2013-January/008016.html
tl;dr: Libtool .la files are not very useful for linking linux
libraries.
Note that there are still some rome for cleanups. In particular,
the .la files are now installed, which we probably don't want; and
some of the macros in Makefile.am are likely redundan.
The variable assignment operator was introduced in make 3.82 and thus
breaks "make install" with older versions of make. Since "=" is optional
in make 3.82 it is safe to drop.
Python binary used in the she-bang line in installed
scripts can be set with ./configure PYTHON_BINARY=...
Defaults to the same path as python used during compilation.
Adding --version makes systemd-analyze behave consistently with the
rest of installed programs.
The lines in ./configure output are reordered to keep all yes/no lines
separate. I think that this makes the output clearer.
This also drops automatic selection of the rc local scripts
based on the local distro. Distributions now should specify the paths
of the rc-local and halt-local scripts on the configure command line.
Commit f934051c4d broke the build
because it made libsystemd-shared call sd_listen_fds() which is
defined in libsystemd-daemon.
This is a bit of a contortion because libsystemd-shared.la is a
noinst_LTLIBRARY, but libtool should do the right thing here and emit
DT_NEEDED on libsystemd-daemon.so for things that consume
libsystemd-shared.la.
The individual address block is a poor man's organizationally unique
identifier.
Perhaps we should change the udev key from ID_OUI_FROM_DATABASE to
something like ID_IEEE_VENDOR_FROM_DATABASE?
Suggested-by: Diego Elio Pettenò <flameeyes@flameeyes.eu>
This saves test output to individual .log files.
The driver is only used in /Makefile.am, not in
/docs/*udev/Makefile.am because the latter don't seem to work with
this driver. They don't produce much output anyway.
.gitignore is alphabetized, and .log files are added to it.
Generated files from /build-aux are removed from the list.
Currently, keymaps are provided only for the NP90X3A laptop. Samsung
introduced updated models, codenamed 900X3B, 900X3C, 900X4B, 900X4C,
which are currently not matched by udev rules. This patch includes the
newer modules in udev rules and move the samsung-n90x3a file defining
keys to a more generic samsung-series-9 file.
The patch was tested on a 900X4C laptop, and other people reported
that the rules also work for 900X3B and 900X3C ones.
TARGET_UBUNTU is effectively the same as TARGET_DEBIAN. Given the Ubuntu
is unlikely to use systemd anytime soon there's no point in keeping this
separate.
Distcheck would fail due to sysvinit dir being set,
but not sysvrcnd dir:
# ./configure --enable-gtk-doc --with-sysvrcd-path=/etc/rc.d
# --with-sysvinit-path=/etc/rc.d
# make distcheck
...
configure: error: *** You need both --with-sysvinit-path=PATH and
--with-sysvrcd-path=PATH to enable SysV compatibility support, or both
empty to disable it.
make: *** [distcheck] Error 1
This also allows sysvcompat support to be disabled from distcheck.
> Kay:
udev is early boot without /var. /var is entirely taboo for udev.
This partially reverts commit ee623f0d0c
(moving hwdb.bin is reverted, but the uninstall hook and cosmetic
changes remain).
The path doesn't change in the standard configuration.
Also, give full path to the journalctl binary in the hook,
since it might be installed outside of $PATH.
Also, add uninstall hook to remove the binary catalog.
More specifically this adds a number of macros that resolve to
directories for udev rules, hwdb entries, tmpfiles and sysctl.
Thsi also includes three new macros for rebuilding the hwbd/catalog
index when a package drops in new files
The hook would fail if preexisting journalctl doesn't support
--update-catalog. Also, the catalog would be updated before new
catalog files were installed. Both issues are fixed by moving to
INSTALL_DATA_HOOK instead of INSTALL_EXEC_HOOK, since the hook is now
executed after both journalctl and catalog files are installed.
I'm building systemd for an embedded system and we would prefer not having
to include the entire util-linux package just to get a libblkid whose
functionality we don't need.
The message catalog can be used to attach short help texts to log lines,
keyed by their MESSAGE_ID= fields. This is useful to help the
administrator understand the context and cause of a message, find
possible solutions and find further related documentation.
Since this is keyed off MESSAGE_ID= this will only work for native
journal messages.
The message catalog supports i18n, and is useful to augment english
language system messages with explanations in the local language.
This commit only includes short explanatory messages for a few example
message IDs, we'll add more complete documentation for the relevant
systemd messages later on.
A service that only sets the scheduling policy to round-robin
fails to be started. This is because the cpu_sched_priority is
initialized to 0 and is not adjusted when the policy is changed.
Clamp the cpu_sched_priority when the scheduler policy is set. Use
the current policy to validate the new priority.
Change the manual page to state that the given range only applies
to the real-time scheduling policies.
Add a testcase that verifies this change:
$ make test-sched-prio; ./test-sched-prio
[test/sched_idle_bad.service:6] CPU scheduling priority is out of range, ignoring: 1
[test/sched_rr_bad.service:7] CPU scheduling priority is out of range, ignoring: 0
[test/sched_rr_bad.service:8] CPU scheduling priority is out of range, ignoring: 100
The point is to allow the use of journald functions by other binaries.
Before, journald code was split into multiple files (journald-*.[ch]),
but all those files all required functions from journald.c. And
journald.c has its own main(). Now, it is possible to link against
those functions, e.g. from test binaries.
This constitutes a fix for https://bugzilla.redhat.com/show_bug.cgi?id=872638.
The patch does the following:
1. rename journald.h to journald-server.h and move corresponding code
to journald-server.c.
2. add journald-server.c and other journald-*.c parts to
libsystemd-journal-internal.
3. remove journald-syslog.c from test_journal_syslog_SOURCES, since
it is now contained in libsystemd-journal-internal.
There are no code changes, apart from the removal of a few static's,
to allow function calls between files.
This was premarily intended to support the LSB facility $httpd which is
only known by Fedora, and a bad idea since it lacks any real-life
usecase.
Similar, drop support for some other old Fedora-specific facilities.
Also, document the rules for introduction of new facilities, to clarify
the situation for the future.
Network file systems generally do not offer inotify() that would work
across the network. We hence cannot rely on inotify() exclusiely in
those case. Provide an API to determine these cases, and suggest doing
manual regular rechecks.
Note that this is not complete yet, as we need to rescan journal dirs on
network file systems explicitly to find new/removed files
When traversing entry array chains for a bisection or for retrieving an
item by index we previously always started at the beginning of the
chain. Since we tend to look at the same chains repeatedly, let's cache
where we have been the last time, and maybe we can skip ahead with this
the next time.
This turns most bisections and index lookups from O(log(n)*log(n)) into
O(log(n)). More importantly however, we seek around on disk much less,
which is good to reduce buffer cache and seek times on rotational disks.
'systemd-coredumpctl' will list available coredumps:
PID UID GID sig exe
32452 500 500 11 /home/zbyszek/systemd/build/journalctl
32666 500 500 11 /usr/lib64/valgrind/memcheck-amd64-linux
...
'systemd-coredumpctl dump PID' will write the coredump
to specified file or stdout.
The new 'unique' API allows listing all unique field values that a field
specified by a field name can take in all entries of the journal. This
allows answering queries such as "What units logged to the journal?",
"What hosts have logged into the journal?", "Which boot IDs have logged
into the journal?".
Ultimately this allows implementation of tools similar to lastlog based
on journal data.
Note that listing these field values will not work for journal files
created with older journald, as the field values are not indexed in
older files.
On systemd systems seasoned admins might be surprised to see that the
init scripts and log files are gone. To ease the transition let's place
some README files there, that hopefully help clearing up the situation.
Much like logind has a client in loginctl, and journald in journalctl
introduce timedatectl, to change the system time (incl. RTC), timezones
and related settings.
Valgrind says:
==29176== Conditional jump or move depends on uninitialised value(s)
==29176== at 0x412A85: cunescape_length_with_prefix (util.c:1565)
==29176== by 0x40B351: dev_kmsg_record (journald-kmsg.c:301)
==29176== by 0x40B653: server_read_dev_kmsg (journald-kmsg.c:347)
==29176== by 0x40B701: server_flush_dev_kmsg (journald-kmsg.c:365)
==29176== by 0x409DE7: main (journald.c:1535)
No longer override the default kernel font if nothing is specified in
vconsole.conf.
The default kernel font[0] provides ISO-8859-1 and box characters. Users
of Arabic, Cyrilic or Hebrew must set a different font manually as these
character sets were provided by the old default font [1], but are not
any longer.
Rationale:
* it is counter-intuitive that an empty vconsole.conf file is different
from adding FONT="";
* the version of the default font shipped with Arch (which is the
upstream one) behaves very badly during early boot[2] (which should
admittedly be fixed in the font itself);
* the kernel already supplies a default font, it seems reasonable to
use that unless anything else is specified;
* This also avoids a needless slow call to setfont; and
* We don't want to work around problems in the kernel (in case the
compiled-in font is not acceptable for whatever reason).
[0]: <https://dev.archlinux.org/~tomegun/kernel.bdf>
[1]: <https://dev.archlinux.org/~tomegun/latarcyrheb.bdf>
[2]: <http://i.imgur.com/J2tM4.jpg>
As audit is pretty much just a special kind of logging we should treat
it similar, and manage the audit fd in a static variable.
This simplifies the audit fd sharing with the SELinux access checking
code quite a bit.
a) Instead of parsing the bus messages inside of selinux-access.c
simply pass everything pre-parsed in the functions
b) implement the access checking with a macro that resolves to nothing
on non-selinux builds
c) split out the selinux checks into their own sources
selinux-util.[ch]
d) this unifies the job creation code behind the D-Bus calls
Manager.StartUnit() and Unit.Start().
This minimal HTTP server can serve journal data via HTTP. Its primary
purpose is synchronization of journal data across the network. It serves
journal data in three formats:
text/plain: the text format known from /var/log/messages
application/json: the journal entries formatted as JSON
application/vnd.fdo.journal: the binary export format of the journal
The HTTP server also serves a small HTML5 app that makes use of the JSON
serialization to present the journal data to the user.
Examples:
This downloads the journal in text format:
# systemctl start systemd-journal-gatewayd.service
# wget http://localhost:19531/entries
Same for JSON:
# curl -H"Accept: application/json" http://localhost:19531/entries
Access via web browser:
$ firefox http://localhost:19531/
