IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
With 8f20232fcb systemd-localed supports
generating locales when required. This fails if the locale directory is
read-only, so make it writable.
Closes#19138
Let's make use of our own credentials infrastructure in our tools: let's
hook up systemd-sysusers with the credentials logic, so that the root
password can be provisioned this way. This is really useful when working
with stateless systems, in particular nspawn's "--volatile=yes" switch,
as this works now:
# systemd-nspawn -i foo.raw --volatile=yes --set-credential=passwd.plaintext-password:foo
For the first time we have a nice, non-interactive way to provision the
root password for a fully stateless system from the container manager.
Yay!
We have a chicken and egg problem: validation of DNSSEC signatures
doesn't work without a correct clock, but to set the correct clock we
need to contact NTP servers which requires resolving a hostname, which
would normally require DNSSEC validation.
Let's break the cycle by excluding NTP hostname resolution from
validation for now.
Of course, this leaves NTP traffic unprotected. To cover that we need
NTPSEC support, which we can add later.
Fixes: #5873#15607
Even though many of those scripts are very simple, it is easier to include
the header than to try to say whether each of those files is trivial enough
not to require one.
We'll leave this as opt-in (i.e. a unit that must be enabled
explicitly), since this is supposed to be a debug/developer feature
primarily, and thus no be around in regular production systems.
This adds the support for veritytab.
The veritytab file contains at most five fields, the first four are
mandatory, the last one is optional:
- The first field contains the name of the resulting verity volume; its
block device is set up /dev/mapper/</filename>.
- The second field contains a path to the underlying block data device,
or a specification of a block device via UUID= followed by the UUID.
- The third field contains a path to the underlying block hash device,
or a specification of a block device via UUID= followed by the UUID.
- The fourth field is the roothash in hexadecimal.
- The fifth field, if present, is a comma-delimited list of options.
The following options are recognized only: ignore-corruption,
restart-on-corruption, panic-on-corruption, ignore-zero-blocks,
check-at-most-once and root-hash-signature. The others options will
be implemented later.
Also, this adds support for the new kernel verity command line boolean
option "veritytab" which enables the read for veritytab, and the new
environment variable SYSTEMD_VERITYTAB which sets the path to the file
veritytab to read.
Instead of invoking meson-add-wants.sh once for each wants that has
to be added, we pass all wants to a single invocation of
meson-add-wants.sh and in meson-add-wants.sh, loop over the
arguments.
This saves about 300ms on the install step.
Before:
```
‣ Running build script...
[1/418] Generating version.h with a custom command
Installing /root/build/po/be.gmo to /root/dest/usr/share/locale/be/LC_MESSAGES/systemd.mo
Installing /root/build/po/be@latin.gmo to /root/dest/usr/share/locale/be@latin/LC_MESSAGES/systemd.mo
Installing /root/build/po/bg.gmo to /root/dest/usr/share/locale/bg/LC_MESSAGES/systemd.mo
Installing /root/build/po/ca.gmo to /root/dest/usr/share/locale/ca/LC_MESSAGES/systemd.mo
Installing /root/build/po/cs.gmo to /root/dest/usr/share/locale/cs/LC_MESSAGES/systemd.mo
Installing /root/build/po/da.gmo to /root/dest/usr/share/locale/da/LC_MESSAGES/systemd.mo
Installing /root/build/po/de.gmo to /root/dest/usr/share/locale/de/LC_MESSAGES/systemd.mo
Installing /root/build/po/el.gmo to /root/dest/usr/share/locale/el/LC_MESSAGES/systemd.mo
Installing /root/build/po/es.gmo to /root/dest/usr/share/locale/es/LC_MESSAGES/systemd.mo
Installing /root/build/po/fr.gmo to /root/dest/usr/share/locale/fr/LC_MESSAGES/systemd.mo
Installing /root/build/po/gl.gmo to /root/dest/usr/share/locale/gl/LC_MESSAGES/systemd.mo
Installing /root/build/po/hr.gmo to /root/dest/usr/share/locale/hr/LC_MESSAGES/systemd.mo
Installing /root/build/po/hu.gmo to /root/dest/usr/share/locale/hu/LC_MESSAGES/systemd.mo
Installing /root/build/po/id.gmo to /root/dest/usr/share/locale/id/LC_MESSAGES/systemd.mo
Installing /root/build/po/it.gmo to /root/dest/usr/share/locale/it/LC_MESSAGES/systemd.mo
Installing /root/build/po/ja.gmo to /root/dest/usr/share/locale/ja/LC_MESSAGES/systemd.mo
Installing /root/build/po/ko.gmo to /root/dest/usr/share/locale/ko/LC_MESSAGES/systemd.mo
Installing /root/build/po/lt.gmo to /root/dest/usr/share/locale/lt/LC_MESSAGES/systemd.mo
Installing /root/build/po/pl.gmo to /root/dest/usr/share/locale/pl/LC_MESSAGES/systemd.mo
Installing /root/build/po/pt_BR.gmo to /root/dest/usr/share/locale/pt_BR/LC_MESSAGES/systemd.mo
Installing /root/build/po/ro.gmo to /root/dest/usr/share/locale/ro/LC_MESSAGES/systemd.mo
Installing /root/build/po/ru.gmo to /root/dest/usr/share/locale/ru/LC_MESSAGES/systemd.mo
Installing /root/build/po/sk.gmo to /root/dest/usr/share/locale/sk/LC_MESSAGES/systemd.mo
Installing /root/build/po/sr.gmo to /root/dest/usr/share/locale/sr/LC_MESSAGES/systemd.mo
Installing /root/build/po/sv.gmo to /root/dest/usr/share/locale/sv/LC_MESSAGES/systemd.mo
Installing /root/build/po/tr.gmo to /root/dest/usr/share/locale/tr/LC_MESSAGES/systemd.mo
Installing /root/build/po/uk.gmo to /root/dest/usr/share/locale/uk/LC_MESSAGES/systemd.mo
Installing /root/build/po/zh_CN.gmo to /root/dest/usr/share/locale/zh_CN/LC_MESSAGES/systemd.mo
Installing /root/build/po/zh_TW.gmo to /root/dest/usr/share/locale/zh_TW/LC_MESSAGES/systemd.mo
Installing /root/build/po/pa.gmo to /root/dest/usr/share/locale/pa/LC_MESSAGES/systemd.mo
real 0m1.465s
user 0m1.025s
sys 0m0.426s
```
After:
```
‣ Running build script...
[1/418] Generating version.h with a custom command
Installing /root/build/po/be.gmo to /root/dest/usr/share/locale/be/LC_MESSAGES/systemd.mo
Installing /root/build/po/be@latin.gmo to /root/dest/usr/share/locale/be@latin/LC_MESSAGES/systemd.mo
Installing /root/build/po/bg.gmo to /root/dest/usr/share/locale/bg/LC_MESSAGES/systemd.mo
Installing /root/build/po/ca.gmo to /root/dest/usr/share/locale/ca/LC_MESSAGES/systemd.mo
Installing /root/build/po/cs.gmo to /root/dest/usr/share/locale/cs/LC_MESSAGES/systemd.mo
Installing /root/build/po/da.gmo to /root/dest/usr/share/locale/da/LC_MESSAGES/systemd.mo
Installing /root/build/po/de.gmo to /root/dest/usr/share/locale/de/LC_MESSAGES/systemd.mo
Installing /root/build/po/el.gmo to /root/dest/usr/share/locale/el/LC_MESSAGES/systemd.mo
Installing /root/build/po/es.gmo to /root/dest/usr/share/locale/es/LC_MESSAGES/systemd.mo
Installing /root/build/po/fr.gmo to /root/dest/usr/share/locale/fr/LC_MESSAGES/systemd.mo
Installing /root/build/po/gl.gmo to /root/dest/usr/share/locale/gl/LC_MESSAGES/systemd.mo
Installing /root/build/po/hr.gmo to /root/dest/usr/share/locale/hr/LC_MESSAGES/systemd.mo
Installing /root/build/po/hu.gmo to /root/dest/usr/share/locale/hu/LC_MESSAGES/systemd.mo
Installing /root/build/po/id.gmo to /root/dest/usr/share/locale/id/LC_MESSAGES/systemd.mo
Installing /root/build/po/it.gmo to /root/dest/usr/share/locale/it/LC_MESSAGES/systemd.mo
Installing /root/build/po/ja.gmo to /root/dest/usr/share/locale/ja/LC_MESSAGES/systemd.mo
Installing /root/build/po/ko.gmo to /root/dest/usr/share/locale/ko/LC_MESSAGES/systemd.mo
Installing /root/build/po/lt.gmo to /root/dest/usr/share/locale/lt/LC_MESSAGES/systemd.mo
Installing /root/build/po/pl.gmo to /root/dest/usr/share/locale/pl/LC_MESSAGES/systemd.mo
Installing /root/build/po/pt_BR.gmo to /root/dest/usr/share/locale/pt_BR/LC_MESSAGES/systemd.mo
Installing /root/build/po/ro.gmo to /root/dest/usr/share/locale/ro/LC_MESSAGES/systemd.mo
Installing /root/build/po/ru.gmo to /root/dest/usr/share/locale/ru/LC_MESSAGES/systemd.mo
Installing /root/build/po/sk.gmo to /root/dest/usr/share/locale/sk/LC_MESSAGES/systemd.mo
Installing /root/build/po/sr.gmo to /root/dest/usr/share/locale/sr/LC_MESSAGES/systemd.mo
Installing /root/build/po/sv.gmo to /root/dest/usr/share/locale/sv/LC_MESSAGES/systemd.mo
Installing /root/build/po/tr.gmo to /root/dest/usr/share/locale/tr/LC_MESSAGES/systemd.mo
Installing /root/build/po/uk.gmo to /root/dest/usr/share/locale/uk/LC_MESSAGES/systemd.mo
Installing /root/build/po/zh_CN.gmo to /root/dest/usr/share/locale/zh_CN/LC_MESSAGES/systemd.mo
Installing /root/build/po/zh_TW.gmo to /root/dest/usr/share/locale/zh_TW/LC_MESSAGES/systemd.mo
Installing /root/build/po/pa.gmo to /root/dest/usr/share/locale/pa/LC_MESSAGES/systemd.mo
real 0m1.162s
user 0m0.803s
sys 0m0.338s
```
systemd-timesyncd.service only applies the much weaker monotonic clock
from file logic, i.e should pull in and order itself before
time-set.target. The strong time-sync.target unit is pulled in by
systemd-time-wait-sync.service.
In hostnamed this is exposed as a dbus property, and in the logs in both
places.
This is of interest to network management software and such: if the fallback
hostname is used, it's not as useful as the real configured thing. Right now
various programs try to guess the source of hostname by looking at the string.
E.g. "localhost" is assumed to be not the real hostname, but "fedora" is. Any
such attempts are bound to fail, because we cannot distinguish "fedora" (a
fallback value set by a distro), from "fedora" (received from reverse dns),
from "fedora" read from /etc/hostname.
/run/systemd/fallback-hostname is written with the fallback hostname when
either pid1 or hostnamed sets the kernel hostname to the fallback value. Why
remember the fallback value and not the transient hostname in /run/hostname
instead?
We have three hostname types: "static", "transient", fallback".
– Distinguishing "static" is easy: the hostname that is set matches what
is in /etc/hostname.
– Distingiushing "transient" and "fallback" is not easy. And the
"transient" hostname may be set outside of pid1+hostnamed. In particular,
it may be set by container manager, some non-systemd tool in the initramfs,
or even by a direct call. All those mechanisms count as "transient". Trying
to get those cases to write /run/hostname is futile. It is much easier to
isolate the "fallback" case which is mostly under our control.
And since the file is only used as a flag to mark the hostname as fallback,
it can be hidden inside of our /run/systemd directory.
For https://bugzilla.redhat.com/show_bug.cgi?id=1892235.
MESON_INSTALL_QUIET is set when --quiet is passed to meson install.
Make sure we check the variable in our custom install scripts and
don't output anything if it is set.
Commit 42cc2855ba incorrectly removed the condition on sysfs in both
sys-fs-fuse-connections.mount and sys-kernel-config.mount. However there are
still needed in case modprobe of one of these modules is intentionally skipped
(due to lack of privs for example).
This patch restores the 2 conditions which should be safe for the common case,
since all conditions are only checked after all deps ordered before are
complete.
Follow-up for 42cc2855ba.
udev requests to start the fs mount units when their respective module is
loaded. For that it monitors uevents of type "ADD" for the relevant fs modules.
However the uevent is sent by the kernel too early, ie before the init() of the
module is called hence before directories in /sys/fs/ are created.
This patch workarounds adds "Requires/After=modprobe@<fs-module>.service" to
the mount unit, which means that modprobe(8) will be called once the fs module
is announced to be loaded. This sounds pointless, but given that modprobe only
returns after the initialization of the module is complete, it should
workaround the issue.
As a side effect, the module will be automatically loaded if the mount unit is
started manually.
Fixes#17586.
This reverts commit 9cbf1e58f9.
The presence of /sys/module/%I directory can't be used to assert that the load
of a given module is complete and therefore the call to modprobe(8) can be
skipped. Indeed this directory is created before the init() function of the
module is called.
Users of modprobe@.service needs to be sure that once this service returns the
module is fully operational.
This is useful for development where overwriting files out side
the configured prefix will affect the host as well as stateless
systems such as NixOS that don't let packages install to /etc but handle
configuration on their own.
Alternative to https://github.com/systemd/systemd/pull/17501
tested with:
$ mkdir inst build && cd build
$ meson \
-Dcreate-log-dirs=false \
-Dsysvrcnd-path=$(realpath ../inst)/etc/rc.d \
-Dsysvinit-path=$(realpath ../inst)/etc/init.d \
-Drootprefix=$(realpath ../inst) \
-Dinstall-sysconfdir=false \
--prefix=$(realpath ../inst) ..
$ ninja install
To make things simple and robust when debugging journald, we'll leave
the SO_TIMESTAMP invocations in the C code in place, even if they are
now typically redundant, given that the sockets are already passed into
the process with SO_TIMESTAMP turned on now.
[zjs: Replaces #17149.
I took half of the patch in
https://github.com/systemd/systemd/pull/17149#issuecomment-698399194,
hence I'm keeping Jonathan's authorship.
The original reasoning for 6c5496c492 was that we
enable remote-cryptsetup.target via presets, and since presets are not used for
the initrd, we need a different target. But since parts of the unit and target
tree are shared between the initramfs and the main system, we can't just create
a separate target for the initramfs. All the targets that depend on this one
would need to be split also. That condition is true for initrd-fs.target, but
not for sysinit.target.
So let's instead just uncoditionally pull in remote-cryptsetup.target in the
initramfs. It should normally be empty, so there should be no impact on boots
that don't have units in the target.
Jonathan's patch used initrd-root-fs.target, this version instead uses
initrd-root-device.target. initrd-root-device.target is ordered before
sysroot.mount, which means that the decrypted devices will be available earlier
too.]
This reverts commit 6c5496c492.
sysinit.target is shared between the initrd and the host system. Pulling in
initrd-cryptsetup.target into sysinit.target causes the following warning at
boot:
Oct 27 10:42:30 workstation-uefi systemd[1]: initrd-cryptsetup.target: Starting requested but asserts failed.
Oct 27 10:42:30 workstation-uefi systemd[1]: Assertion failed for initrd-cryptsetup.target.
For encrypted block devices that we need to unlock from the initramfs,
we currently rely on dracut shipping `cryptsetup.target`. This works,
but doesn't cover the case where the encrypted block device requires
networking (i.e. the `remote-cryptsetup.target` version). That target
however is traditionally dynamically enabled.
Instead, let's rework things here by adding a `initrd-cryptsetup.target`
specifically for initramfs encrypted block device setup. This plays the
role of both `cryptsetup.target` and `remote-cryptsetup.target` in the
initramfs.
Then, adapt `systemd-cryptsetup-generator` to hook all generated
services to this new unit when running from the initrd. This is
analogous to `systemd-fstab-generator` hooking all mounts to
`initrd-fs.target`, regardless of whether they're network-backed or not.
Ensure that systemd-random-seed.service has completed before marking
a first boot as completed to guarantee that a saved seed will only be
used after it has been initialized at least once.
Make sure systemd-firstboot completes before reaching first-boot-complete.target
and thus marking the first boot as completed. This way, it is
guaranteed that systemd-firstboot has a chance to complete provisioning
at least once, even in cases of the first boot getting aborted early.
Add a new target for synchronizing units that wish to run once during
the first boot of the system. The machine-id will be committed to disk
only after the target has been reached, thus ensuring that all units
ordered before it had a chance to complete.
Let's explicitly deactivate all home dirs on shutdown, in order to
properly synchronizing unmounting and avoiding blocking devices.
Previously, we'd rely on automatic deactivation when home directories
become unused. However, that scheme is asynchronous, and ongoing
deactviations might conflicts with attempts to unmount /home. Let's fix
that by providing an explicit service systemd-homed-activate.service
whose only job is to have a ExecStop= line that explicitly deactivates
all home directories on shutdown. This service can the be ordered after
home.mount and similar, ensuring that we'll first deactivate all homes
before deactivating /home itself during shutdown.
This is kept separate from systemd-homed.service so that it is possible
to restart systemd-homed.service without deactivating all home
directories.
Fixes: #16842
