IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Using `bootctl set-default @current` will set the default loader entry
to the currently booted entry as read from the `LoaderEntrySelected` EFI
variable.
Also `bootctl set-oneshot @current` will set the oneshot loader entry to
the current booted entry.
Correspondingly `@default` and `@oneshot` can be used to read from the
LoaderEntryDefault and LoaderEntryOneshot EFI variables.
bootctl implements three types of operation: those that work with an EFI
boot loader, those which work with any EFI boot loader that implements
the boot loader spec + interface, and finally those specific to sd-boot.
Previously the --help text and the man page mixed them all up. Let's put
them clearly in three separate sections however, to communicate clearly
what is supposed to work everywhere, and what is specific to
systemd-boot or boot loaders implementing the two specs.
This adjusts wording here and there, but is mostly just about
re-ordering existing docs, and putting them under new sections.
Apparently some firmwares don't allow us to write this token, and refuse
it with EINVAL. We should normally consider that a fatal error, but not
really in the case of "bootctl random-seed" when called from the
systemd-boot-system-token.service since it's called as "best effort"
service after boot on various systems, and hence we shouldn't fail
loudly.
Similar, when we cannot find the ESP don't fail either, since there are
systems (arch install ISOs) that carry a boot loader capable of the
random seed logic but don't mount it after boot.
Fixes: #13603
This makes the naming more consistent: we now have
bootctl systemd-efi-options,
$SYSTEMD_EFI_OPTIONS
and the SystemdOptions EFI variable.
(SystemdEFIOptions would be redundant, because it is only used in the context
of efivars, and users don't interact with that name directly.)
bootctl is adjusted to use 2sp indentation, similarly to systemctl and other
programs.
Remove the prefix with the old name from 'bootctl systemd-efi-options' output,
since it's redundant and we don't want the old name anyway.
For executables which take a verb, we should list the verbs first, and
then options which modify those verbs second. The general layout of
the man page is from general description to specific details, usually
Overview, Commands, Options, Return Value, Examples, References.
The "include" files had type "book" for some raeason. I don't think this
is meaningful. Let's just use the same everywhere.
$ perl -i -0pe 's^..DOCTYPE (book|refentry) PUBLIC "-//OASIS//DTD DocBook XML V4.[25]//EN"\s+"http^<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN"\n "http^gms' man/*.xml
No need to waste space, and uniformity is good.
$ perl -i -0pe 's|\n+<!--\s*SPDX-License-Identifier: LGPL-2.1..\s*-->|\n<!-- SPDX-License-Identifier: LGPL-2.1+ -->|gms' man/*.xml
let's add an env var for this, as this really shouldn't be a top-level
feature, as it turning off the validity checks certainly isn't
advisable.
Fixes: #4925
Docbook styles required those to be present, even though the templates that we
use did not show those names anywhere. But something changed semi-recently (I
would suspect docbook templates, but there was only a minor version bump in
recent years, and the changelog does not suggest anything related), and builds
now work without those entries. Let's drop this dead weight.
Tested with F26-F29, debian unstable.
$ perl -i -0pe 's/\s*<authorgroup>.*<.authorgroup>//gms' man/*xml
This part of the copyright blurb stems from the GPL use recommendations:
https://www.gnu.org/licenses/gpl-howto.en.html
The concept appears to originate in times where version control was per
file, instead of per tree, and was a way to glue the files together.
Ultimately, we nowadays don't live in that world anymore, and this
information is entirely useless anyway, as people are very welcome to
copy these files into any projects they like, and they shouldn't have to
change bits that are part of our copyright header for that.
hence, let's just get rid of this old cruft, and shorten our codebase a
bit.
Files which are installed as-is (any .service and other unit files, .conf
files, .policy files, etc), are left as is. My assumption is that SPDX
identifiers are not yet that well known, so it's better to retain the
extended header to avoid any doubt.
I also kept any copyright lines. We can probably remove them, but it'd nice to
obtain explicit acks from all involved authors before doing that.
This rearranges bootctl a bit, so that it uses the usual verbs parsing
routines, and automatically searches the ESP in /boot, /efi or /boot/efi, thus
increasing compatibility with mainstream distros that insist on /boot/efi.
This also adds minimal support for running bootctl in a container environment:
when run inside a container verification of the ESP via raw block device
access, trusting the container manager to mount the ESP correctly. Moreover,
EFI variables are not accessed when running in the container.
If the ESP is not mounted with "iocharset=ascii", but with "iocharset=utf8"
(which is for example the default in Debian), the file system becomes case
sensitive. This means that a file created as "FooBarBaz" cannot be accessed as
"foobarbaz" since those are then considered different files.
Moreover, a file created as "FooBar" can then also not be accessed as "foobar",
and it also prevents such a file from being created, as both would use the same
8.3 short name "FOOBAR".
Even though the UEFI specification [0] does give the canonical spelling for
the files mentioned above, not all implementations completely conform to that,
so it's possible that those files would already exist, but with a different
spelling, causing subtle bugs when scanning or modifying the ESP.
While the proper fix would of course be that everybody conformed to the
standard, we can work around this problem by just referencing the files by
their 8.3 short names, i.e. using upper case.
Fixes: #3740
[0] <http://www.uefi.org/specifications>, version 2.6, section 3.5.1.1
This did not really work out as we had hoped. Trying to do this upstream
introduced several problems that probably makes it better suited as a
downstream patch after all. At any rate, it is not releaseable in the
current state, so we at least need to revert this before the release.
* by adjusting the path to binaries, but not do the same thing to the
search path we end up with inconsistent man-pages. Adjusting the search
path too would be quite messy, and it is not at all obvious that this is
worth the effort, but at any rate it would have to be done before we
could ship this.
* this means that distributed man-pages does not make sense as they depend
on config options, and for better or worse we are still distributing
man pages, so that is something that definitely needs sorting out before
we could ship with this patch.
* we have long held that split-usr is only minimally supported in order
to boot, and something we hope will eventually go away. So before we start
adding even more magic/effort in order to make this work nicely, we should
probably question if it makes sense at all.
In particular, use /lib/systemd instead of /usr/lib/systemd in distributions
like Debian which still have not adopted a /usr merge setup.
Use XML entities from man/custom-entities.ent to replace configured paths while
doing XSLT processing of the original XML files. There was precedent of some
files (such as systemd.generator.xml) which were already using this approach.
This addresses most of the (manual) fixes from this patch:
http://anonscm.debian.org/cgit/pkg-systemd/systemd.git/tree/debian/patches/Fix-paths-in-man-pages.patch?h=experimental-220
The idea of using generic XML entities was presented here:
http://lists.freedesktop.org/archives/systemd-devel/2015-May/032240.html
This patch solves almost all the issues, with the exception of:
- Path to /bin/mount and /bin/umount.
- Generic statements about preference of /lib over /etc.
These will be handled separately by follow up patches.
Tested:
- With default configure settings, ran "make install" to two separate
directories and compared the output to confirm they matched exactly.
- Used a set of configure flags including $CONFFLAGS from Debian:
http://anonscm.debian.org/cgit/pkg-systemd/systemd.git/tree/debian/rules
Installed the tree and confirmed the paths use /lib/systemd instead of
/usr/lib/systemd and that no other unexpected differences exist.
- Confirmed that `make distcheck` still passes.
What used to be gummiboot, was renamed sd-boot when it was merged into
systemd. Let's try to be a bit more consistent with the rest of systemd
and rename it again as follows:
The EFI bootloader is now called 'systemd-bootx64.efi', and its sources are in
'src/boot/efi/'. The drop-in directory where bootctl will find EFI loaders
is now /usr/lib/systemd/boot/efi/.
