IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
This reverts commit cb96a2c69a.
It is not a mistake to pass args when -b is specified. They will simply
be passed on to the container's init.
The manpage needs fixing, that's true.
Occasionally people report problem with reboot/poweroff operations hanging in
the middle. One known cause is when a new transaction to start a unit is
enqueued while the shutdown is going on. The start of the unit conflicts with
the shutdown jobs, so they get cancelled. The failure case can be quite unpleasant,
becase getty and sshd may already be stopped.
Fix it by using irreversible jobs for shutdown (reboot/poweroff/...) actions.
This applies to commands like "reboot", "telinit 6", "systemctl reboot". Should
someone desire to use reversible jobs, they can say "systemctl start reboot.target".`
Add a new job mode: replace-irreversibly. Jobs enqueued using this mode
cannot be implicitly canceled by later enqueued conflicting jobs.
They can however still be canceled with an explicit "systemctl cancel"
call.
"systemctl default" should behave identically to "telinit N" (where N is the
corresponding runlevel target number), therefore it should use isolate job mode
too.
In systemd-bootchart, the disk model information will not be found
unless the root device is specified using `root=/dev/sdxY` on the kernel
line. Just add a note as to why this doesn't happen.
Turning off filtering with --filter is just too confusing.
Config option "Filter" doesn't have to be changed, here
"Filter=yes" already meant to filter.
This makes 'status' behave like 'list-units':
systemctl status -> status of all units
systemctl -t error status -> status of error units
systemctl -t mount status -> etc.
Essentially transfer the 'README' file in src/bootchart to the man page
for easier reading by users.
Moved the 'History' section to the bottom, before the 'See Also' section.
man/systemd-bootchart.xml | 100 ++++++++++++++++++++++++++++++++++++++--------
1 file changed, 83 insertions(+), 17 deletions(-)
systemd-nspawn will now print the PID of the child.
An example showing how to enter the container is added
to the man page.
Support for nsenter without an explicit command was
added in https://github.com/karelzak/util-linux/commit/5758069
(post v2.22.2). So this example requires both a new kernel
and the latest util-linux.
Option listings seemed to be pretty much random, some were short opt,
long opt, others were long opt, short opt. This just makes every option
with a short and long opt that I could find in the order short opt, long
opt, for formatting's sake.
This unifies much of the logic behind them:
- All four will now ofllow the rule that the earlier file and earlier
assignment in the .d/ directories wins. Before, sysctl was the only
outlier, where the later setting always won.
- All four now support getopt() and --help on the command line.
- All four can now handle specification of configuration file names on
the command line to apply. The tools will automatically find them, and
apply them. Previously only tmpfiles could do that. This is useful for
%post scripts in RPMs and suchlike.
- This fixes various error path issues in conf_files_list()
In other cases where multiple directories are searched for unit files,
the list of directories is described in the man page describing the
format. I think this makes sense too in case of systemd directories,
since the systemd(1) manpage already has an overview of many different
topics.
man rules were repeating the same information in too many places,
which was error prone. Those rules can be easily generated from .xml
files. For efficiency and because python is not a required dependency,
Makefile-man.am is only regenerated when requested with
make update-man-list
If no metadata in man/*.xml changed, this file should not change. So
only when a new man page or a new alias is added, this file should
show up in 'git diff'. The change should then be committed.
If the support for building from git without python was dropped, we
could drop Makefile-man.am from version control. This would also
increase the partial build time (since more stuff would be rebuild
whenever sources in man/*.xml would be modified), so it would probably
wouldn't be worth it.
Mukund Sivaraman pointed out that cryptsetup(5) mentions the "read-only"
option, while the code understands "readonly".
We could just fix the manpage, but for consistency in naming of
multi-word options it would be prettier to have "read-only". So let's
accept both spellings.
BZ: https://bugzilla.redhat.com/show_bug.cgi?id=903463
This allows one templated unit to refer to another templated unit
at installation time.
Examples:
> grep WantedBy ~/.config/systemd/user/mpop@.timer
WantedBy=services@%i.target
> srv disable mpop@iit.timer
rm '/home/alxchk/.config/systemd/user/services@iit.target.wants/mpop@iit.timer'
> srv enable mpop@iit.timer
ln -s '/home/alxchk/.config/systemd/user/mpop@.timer' '/home/alxchk/.config/systemd/user/services@iit.target.wants/mpop@iit.timer'
Based-on-patch-by: Oleksii Shevchuk <alxchk@gmail.com>
Archlinux has a similar tool to debbotstrap in the arch-install-scripts
package that will install to a specified directory. This is generally
used for installation, so the -d flag must be passed to tell it to
install to a non-mountpoint directory.
New sections are added: PAM options, crypttab options, commandline
options, miscellaneous. The last category will be used for all
untagged <varname> elements.
Commandline options sections is meant to be a developer tool: when
adding an option it is sometimes useful to be able to check if
similarly named options exist elsewhere.
Type X will exclude path itself from clean-up. However, if the path is a
directory systemd-tmpfiles will clean-up its content.
In contrast to type x, where path is ignored completely, type X needs some
Age parameter. In order to determine Age parameter, we will look for config
entries of type d or D and pick the best match. Best match is either
exact match or longest prefix match.
Hi all,
while working on another bug, I discovered the "strange" way systemd is
parsing Environment= in .service and thought it was worth documenting
(because I don't expect people to find this syntax by themselves unless
they read the parsing code ;)
Be more verbose about using space in Environment field and not
using value of other variables
Fixes https://bugzilla.redhat.com/show_bug.cgi?id=840260
[zj: expand and reformat the example a bit]
Due to the brokeness of much of the userspace audit code we cannot
really start too many systems without the audit caps set. To make nspawn
easier to use just add the audit caps by default.
To boot up containers successfully the kernel's auditing needs to be
turned off still (use "audit=0" on the kernel command line), but at
least no manual caps have to be passed anymore.
In the long run auditing will be fixed for containers and ve virtualized
properly at which time it should be safe to enable these caps anyway.
Variable definitions can be written on more than one line - if each ends
with a backslash, then is concatenated with a previous one. Only
backslash and unix end of line (\n) are treated as a continuation.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=58083
[zj: squashed two patches together; cleaned up grammar; removed
comment about ignoring trailing backslash -- it is not ignored.]
Document continuation support in systemd.exec
systemctl list-dependencies lists all unit's dependecies and
recursively expands all subsidiary target units into a tree.
Primary purpose for this command is to show all units which are
enabled in specified target.
We no longer allow early-boot init scripts, however in late boot the
syslog socket and local mounts are established anyway, so let's simplify
our dep graph a bit.
If $syslog doesn't resolve to syslog.target anymore there's no reason to
keep syslog.target around anymore. Let's remove it.
Note that many 3rd party service unit files order themselves after
syslog.target. These will be dangling dependencies now, which should be
unproblematic, however.
New file output.h with output flags and modes.
--full parameter also for cgls and loginctl.
Include 'all' parameter in flags (show_cgroup_by_path, show_cgroup,
show_cgroup_and_extra, show_cgroup_and_extra_by_spec).
get_process_cmdline with max_length == 0 will not ellipsize output.
Replace LINE_MAX with 0 in some calls of get_process_cmdline.
[zj: Default to --full when under pager for clgs.
Drop '-f' since it wasn't documented and didn't actually work.
Reindent a bit.
]
Systemd should not introduce any new facilities. Distributions which still
need to support their non-standard/legacy facilities should add them as
patches to their packaging.
The following facilities are no longer recognized:
$x-display-manager
$mail-transfer-agent
$mail-transport-agent
$mail-transfer-agent
$smtp
$null
This target is no longer available:
mail-transfer-agent.target
This way we also get a man page. The output is not as polished.
I hope that it doesn't matter too much.
index.html is not generated now, the page is called
systemd.index.html. If necessary, an install hook should be added.
For all unit files foobar.service we will now read
foobar.service.d/*.conf, too. This may be used to override certain unit
settings without having to edit unit files directly.
This makes it really easy to change specific settings for services
without having to edit any unit file:
mkdir /etc/systemd/system/avahi-daemon.service.d/
echo -e '[Service]\nNice=99' > /etc/systemd/system/avahi-daemon.service.d/nice.conf
systemctl daemon-reload
Bootchart is renamed to 'systemd-bootchart' and installed as
/usr/lib/systemd/systemd-bootchart. The configuration file
will reside in /etc/systemd/bootchart.conf.
Adds is-failed to join is-active and is-enabled.
I grabbed this one from the todo list. Most of the functionality was
already there for is-active. I just needed to make check_one_unit take
the states to check for as an argument instead of the hardcoded
"active" and "reloading".
is-failed will return 1 if none of the units given are failed. This is
different from is-active which will return 3 if none of the units
given are active. It returns 3 with this comment:
/* According to LSB: "program is not running" */
As that does not make sense when looking for failed units I simply
chose 1 instead.
For many usecases it is useful to store the chassis type somewhere, and
/etc/machine-info sounds like a good place. Ideally we could always
detect the chassis type from firmware, but frequently that's not
available and in many embedded devices probably entirely unrealistic.
This patch adds a configurable setting CHASSIS= to /etc/machine-info and
exposes this via hostnamectl/hostnamed. hostnamed will guess the chassis
type from DMI if nothing is set explicitly. I also added support for
detecting it from ACPI, which should be more useful as ACPI 5.0 actually
knows a "tablet" chassis type, which neither DMI nor previous ACPI
versions knew.
This also enables DMI-based and ACPI-based detection for non-x86 systems
as ACPI is apparently coming to ARM platforms soon.
I tried to minimize the vocabulary of chassis types understood and
added: desktop, laptop, server, tablet, handset. This is much less than
either APCI or DMI know. If we need more types later on we can easily
add them.
This saves test output to individual .log files.
The driver is only used in /Makefile.am, not in
/docs/*udev/Makefile.am because the latter don't seem to work with
this driver. They don't produce much output anyway.
.gitignore is alphabetized, and .log files are added to it.
Generated files from /build-aux are removed from the list.
This introduces a new data threshold setting for sd_journal objects
which controls the maximum size of objects to decompress. This is
relieves the library from having to decompress full data objects even
if a client program is only interested in the initial part of them.
This speeds up "systemd-coredumpctl" drastically when invoked without
parameters.
Sometimes it is better to see messages in full, and the existing
set of options didn't allow this easily. E.g. now
journalctl -f --full
will behave like
tail -f /var/log/messages
of yore.
Long option only for now, since small letters are becoming
scarce, and this doesn't feel like a capital-letter-option.
'-u' would be nice, and the above command would be spelled
journalctl -fu
> Kay:
udev is early boot without /var. /var is entirely taboo for udev.
This partially reverts commit ee623f0d0c
(moving hwdb.bin is reverted, but the uninstall hook and cosmetic
changes remain).
The message catalog can be used to attach short help texts to log lines,
keyed by their MESSAGE_ID= fields. This is useful to help the
administrator understand the context and cause of a message, find
possible solutions and find further related documentation.
Since this is keyed off MESSAGE_ID= this will only work for native
journal messages.
The message catalog supports i18n, and is useful to augment english
language system messages with explanations in the local language.
This commit only includes short explanatory messages for a few example
message IDs, we'll add more complete documentation for the relevant
systemd messages later on.
A service that only sets the scheduling policy to round-robin
fails to be started. This is because the cpu_sched_priority is
initialized to 0 and is not adjusted when the policy is changed.
Clamp the cpu_sched_priority when the scheduler policy is set. Use
the current policy to validate the new priority.
Change the manual page to state that the given range only applies
to the real-time scheduling policies.
Add a testcase that verifies this change:
$ make test-sched-prio; ./test-sched-prio
[test/sched_idle_bad.service:6] CPU scheduling priority is out of range, ignoring: 1
[test/sched_rr_bad.service:7] CPU scheduling priority is out of range, ignoring: 0
[test/sched_rr_bad.service:8] CPU scheduling priority is out of range, ignoring: 100
Since we already allow defining the mode of AF_UNIX sockets and FIFO, it
makes sense to also allow specific user/group ownership of the socket
file for restricting access.
This was premarily intended to support the LSB facility $httpd which is
only known by Fedora, and a bad idea since it lacks any real-life
usecase.
Similar, drop support for some other old Fedora-specific facilities.
Also, document the rules for introduction of new facilities, to clarify
the situation for the future.
This adds SMACK label configuration options to socket units.
SMACK labels should be applied to most objects on disk well before
execution time, but two items remain that are generated dynamically
at run time that require SMACK labels to be set in order to enforce
MAC on all objects.
Files on disk can be labelled using package management.
For device nodes, simple udev rules are sufficient to add SMACK labels
at boot/insertion time.
Sockets can be created at run time and systemd does just that for
several services. In order to protect FIFO's and UNIX domain sockets,
we must instruct systemd to apply SMACK labels at runtime.
This patch adds the following options:
Smack - applicable to FIFO's.
SmackIpIn/SmackIpOut - applicable to sockets.
No external dependencies are required to support SMACK, as setting
the labels is done using fsetxattr(). The labels can be set on a
kernel that does not have SMACK enabled either, so there is no need
to #ifdef any of this code out.
For more information about SMACK, please see Documentation/Smack.txt
in the kernel source code.
v3 of this patch changes the config options to be CamelCased.
Network file systems generally do not offer inotify() that would work
across the network. We hence cannot rely on inotify() exclusiely in
those case. Provide an API to determine these cases, and suggest doing
manual regular rechecks.
Note that this is not complete yet, as we need to rescan journal dirs on
network file systems explicitly to find new/removed files
https://bugs.freedesktop.org/show_bug.cgi?id=55890
Fixed typos, serial comma, and removed "either" as there were more
than two options. Also did an extra rename of "system-shutdown"
to "systemd-shutdown" that was forgotten in commit
8bd3b8620c
