IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
This device implements the phone mute HID usage as a toggle switch,
where 1 indicates muted, and 0 indicates unmuted. However, for a key
event 1 indicates that the key has been pressed and 0 indicates it has
been released. This mismatch causes issues, so prevent key events from
being generated for this HID usage.
It has been shown that the autosuspend delay for this device enacted
by modem manager will race with suspend and cause system suspend
failures.
This occurred in ChromiumOS on a chromebook, but there is no reason
it won't happen in regular notebooks with the same WWAN. To avoid
the failure delay autosuspend to a frequency longer than the polling
rate used by modem manager.
Link: https://chromium-review.googlesource.com/c/chromiumos/overlays/board-overlays/+/3635003
Link: 43e76bf1bb/src/mm-iface-modem.c (L1633)
For micmute userspace handles both micmute and f20, as Xorg cannot
handle the high keycode that the micmute key has. As such, adding the
remapping means that the key will work on Xorg clients and not just when
using wayland.
Add keymappings for the Acer Aspire One AO532h netbook.
Unmap the brightnesskeys because they send duplicate key events with
the ACPI video bus key events and add a mapping for the bluetooth
on/off hotkey.
We've had this text since the beginning, but in fact the patterns must be
stable in order for people to create local hwdb entries. And we support that
and can't change the match patterns without being very careful. So let's just
drop the text.
The handling of whitespace in pyparsing is a bother. There's some
global state, and per-element state, and it's hard to get a handle on
things. With python3-pyparsing-2.4.7-10.fc36.noarch the grammar would
not match. After handling of tabs was fixed to not accept duplicate tabs,
the grammar passes.
It seems that the entry for usb:v8087p8087*
was generated incorrectly because we treated the interface line
(with two TABs) as a device line (with one TAB).
On the new Elite x360 2 in 1 HP laptops, the microphone mute hotkey is "Fn+F8" and
the scancode for this hotkey is 0x81, but this scancode was mapped to
fn_esc in the HP generic keymap section. To fix this problem, we add
a machine specific keymap section to add the correct keymap rule.
The Stream Deck products from Elgato are simple key pads
intended to be used as macro pads. They're popular within
the streaming community.
This commit adds all 5 Stream Deck variants available to
the AV production file.
See https://www.elgato.com/en/stream-deck
This adds support for AV production controller devices, such
as DJ tables, music-oriented key pads, and others.
The USB vendor and product IDs come from Mixxx, Ctlra, and
Ardour.
Fixes#20533
Co-developed-by: Georges Basile Stavracas Neto <georges.stavracas@gmail.com>
The brightness control key (Fn+F7 Fn+F8) and touchpad toggle key (Fn + Space) do not work on the NEC VersaPro VG-S laptop. Add the keycode to fix the problem.
The approach to use '''…'''.split() instead of a list of strings was initially
used when converting from automake because it allowed identical blocks of lines
to be used for both, making the conversion easier.
But over the years we have been using normal lists more and more, especially
when there were just a few filenames listed. This converts the rest.
No functional change.
The machine has tree buttons connected to an EC that acts as a regular
AT-compatible keyboard controller. It can be either in "Windows 7" or
"Android" mode. It boots up with the earlier, but the Android build on
the tablet switches it on bootup (Windows presumably leaves it as-is).
The "Windows 7" mode, the behavior is very inconvenient: the Home button
emits multiple key presses that presumably do something in Windws 7 while
the second button toggles the RF Kill Switch in addition to producing a
scancode (it's labeled "Back" on Android version of the tablet).
The "Android" mode just sends the good ol' scan codes and this patch
handles them. On mainline Linux, the "x86-android-tablets" driver makes
sure we're in the correct mode.
Add a new database for handhelds (PDAs, calculators, etc.) that should be
accessible the seat owner.
The database is initially populated with Texas Instruments calculators
and linking cables, which removes the need to installing dedicated udev
rules for them.
The check was added in 77547d5313, but
it doesn't work as expected. Because the second part is wrapped in Optional(),
it would silently "succeed" when the lowercase digits were in the second part:
>>> from parse_hwdb import *
>>> g = 'v' + upperhex_word(4) + Optional('p' + upperhex_word(4))
>>> g.parseString('v04D8pE11C*')
(['v', '04D8', 'p', 'E11C'], {})
>>> g.parseString('v04D8pe11c*')
(['v', '04D8'], {})
The following matches are OK:
usb:v0627p0001:*QEMU USB Keyboard*
usb:v0627p0001:*
usb:v0627p0001*
usb:v0627*
The Asus TF103C misses the home button in its PNP0C40 GPIO resources
causing the button mappings for the volume buttons to be off by one,
leading to the volume-up button sending home button presses and the
volume-down button sending volume-up button presses.
Add a 60-keyboard hwdb entry to correct the mappings. Note this is
split over 2 input devices because the soc_button_array driver
creates separate input devices for power + home and vol up/down.
This is done because power/home act as wakeup buttons where as
the volume buttons do not.
This means that after this fixup the home -> volume-up button
still acts as a wakeup button, there is nothing which can be done
about this without adding a kludge to the kernel which is not
worth the trouble (IMHO).
This entry only matches on vid/pid, so the pen event node of the device
would also get assigned the ID_INPUT_TABLET_PAD property - making it
break with libinput.
On top of that, UC-Logic's tablets re-use USB ids, so now we're breaking
multiple devices this way.
To get this device tagged correctly, use libwacom which has the
per-device hwdb entries.
Fixes#17953
This reverts commit 0fbe78ac7a
Kernels >= 5.8 have added new fields to the dmi/id/modalias file in the
middle of the modalias (instead of adding them at the end).
Specifically new ":br<value>:" and (optional) ":efr<value>:" fields have
been added between the ":bd<value>:" and ":svn<value>:" fields.
Note the 5.13.0 and 5.14.0 kernels also added a new ":sku<value>:" field
between the ":pvr<value>:" and ":rvn<value>:" fields, this has been fixed
in later 5.13.y and 5.14.y releases, by moving the sku field to the end:
https://lore.kernel.org/lkml/20210831130508.14511-1-hdegoede@redhat.com/
Unfortunately the same cannot be done for the new br and efr fields since
those have been added more then a year ago and hwdb even already has some
newer entries relying on the new br field being there (and thus not working
with older kernels).
Fix the issue with the br and efr fields through the following changes:
1. Replace any matches on ":br<value>" from newer entries with an '*'
2. Replace "bd<value>:svn<value>" matches with: "bd<value>:*svn<value>"
inserting an '*' where newer kernels will have the new br + efr fields
This makes these matches working with old as well as new kernels.
Link: https://github.com/systemd/systemd/issues/20550
Link: https://github.com/systemd/systemd/pull/20562
The USB persist feature allows devices that can retain their state when
powered down to work across suspend/resume. This is in particular useful
for USB drives.
However, the persist feature can get in the way for devices that are
unable to retain their state when power is lost. An example of such
stateful devices are fingerprint readers where USB persist should be
disabled to ensure userspace can detect whether the USB device had a
power loss during system suspend.
This will initially be used by the libfprint autosuspend hwdb.
Closes: #20754
This is a related commit to the bug reported in Ubuntu:
https://bugs.launchpad.net/ubuntu/+source/systemd/+bug/1938259
This adds additional 4 models that without this param, the screen rotates
when the clamshell laptop rotates, which is an unwanted behavior.
This commit also merges entries that needs the same param.
Signed-off-by: Yao Wei (魏銘廷) <yao.wei@canonical.com>