IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Added Cube Mix Plus (i18B) Rotation information.
Also Combined the sensor lines with the different Cube i7 stylus models because they use the same ACCEL_MOUNT_MATRIX
The Lenovo ThinkPad Yoga 11e 360 degree hinges style 2-in-1s use 2
accelerometers, 1 in the display and 1 in the base.
Kernel work is under way to also export the second accelerometer in
the base as an iio-device; and userspace work is underway to use
both accelerometers on 360 degree hinges style 2-in-1s (with 2 accels)
to figure out the angle between the 2 halves.
So far most orientation-matrix quirks have not cared much about the
Z-axis being correct, but in these 2 accelerometer setups getting
the Z-axis correct is important too.
The KIOX010A and KIOX02A ACPI hw-ids (HIDs) are used in 360 degree hinges
style 2-in-1s which have 2 accelerometers, 1 in the display (as usual) and
a second accelerometer in the base.
So far 60-sensor.hwdb has only defined a mount-matrix for the
sensor with the KIOX010A HID, which is the sensor in the display
half of the device. The reason for this is that sofar userspace has
only cared actually used the sensor in the display (for automatic
display rotation. Work is underway to make userspace use both sensors:
https://gitlab.freedesktop.org/hadess/iio-sensor-proxy/-/issues/216
Recently an entry was added for the Medion Akoya's E2221T base-sensor,
but that was added to mark it with ACCEL_LOCATION=base and the entry
simply used the identity-matrix for ACCEL_MOUNT_MATRIX since nothing
is using the mount-matrix info for the second accelerometer.
I believe that this entry was added because on some devices the second
accelerometer gets enumerated first and then iio-sensor-proxy will
wrongly use the second sensor for display-rotation, unless it is marked
with ACCEL_LOCATION=base.
Instead of adding info for the second accelerometer on a per device
basis use the same generic dmi matches as used for the first (KIOX010A)
sensor, replacing the special case added for the E2221T and also
update the ACCEL_MOUNT_MATRIX with the actual mount-matrix for the
KIOX020A sensor in the base of these devices.
This was tested on a Medion Akoya E2228T.
Document how the mount-matrix for the base-accelerometer must be set on
360 degree hinges style 2-in-1s with 2 sensors (one in the display and
1 in the base).
Note the choice to define the lid being fully closed as an angle of
0 degrees is based on the ACPI tables of devices with a BOSC0200
ACPI device-node describing both sensors. In this case the ACPI
tables contain mount-matrix info (and the kernel will soon support
reading this and exporting it to userspace) and the mount-matrices
defined in these ACPI tables are such that the angle of the G-force
vector measured by the sensors is identical for both sensors when
the laptop's lid is fully closed.
This also feels more natural then defining the laptop being fully
open (180 degrees open) as the home / 0 degree angle position.
No functional change is intended.
The general pattern of changes:
-usb:v04F3p2B7C*
+usb:v04F3p2B7C:*
This is mostly a clarification, to make the part that makes the usb vXXXXpYYYY
part visually separated. It would only make a difference if we added further
keys with a different number of digits, which is unlikely.
-usb:v0627p0001:*QEMU USB Keyboard*
-usb:v0627p0001:*QEMU USB Mouse*
-usb:v0627p0001:*QEMU USB Tablet*
+usb:v0627p0001:*QEMU USB Keyboard*:*
+usb:v0627p0001:*QEMU USB Mouse*:*
+usb:v0627p0001:*QEMU USB Tablet*:*
Again, only a clarification. We know that ":" will appear somewhere later in
the match key, so anything that matches "…Keyboard*" will also match "…Keyboard*:*".
-evdev:name:ETPS/2 Elantech Touchpad:dmi:*svnASUSTeKComputerInc.:pnN53SV*
+evdev:name:ETPS/2 Elantech Touchpad:dmi:*svnASUSTeKComputerInc.:pnN53SV:*
This makes the match narrower. Previously we would match product "N53SV"
and "N53SV2", "N53SV3", and others. Here we are saying that the ':pn' part must
match exactly. Most of the changes in this patch match this pattern. I made a few
judgement calls and used "pn…*:*" when I wasn't sure if the full pn is included:
-evdev:name:Dell WMI hotkeys:dmi:bvn*:bvr*:bd*:svnDell*:pnPrecision*
+evdev:name:Dell WMI hotkeys:dmi:bvn*:bvr*:bd*:svnDell*:pnPrecision*:*
-evdev:name:Cypress APA Trackpad ?cyapa?:dmi:*:svnHewlett-Packard*:pnFalco*:
+evdev:name:Cypress APA Trackpad ?cyapa?:dmi:*:svnHewlett-Packard*:pnFalco*:*
This more like the "QEMU" example above, since all dmi strings end in ":", so
anything which matches the old version will also match the new version.
-evdev:atkbd:dmi:bvn*:bvr*:bd*:svnGateway*:pnA0A1*:pvr*
+evdev:atkbd:dmi:bvn*:bvr*:bd*:svnGateway*:pnA0A1*:*
I replaced trailing ":pvr*" by ":*". This makes no functional difference because
we expect "pvr" to always appear in the dmi string. This makes patterns shorter.
-evdev:atkbd:dmi:bvn*:bvr*:bd*:svnAcer*:pn*
+evdev:atkbd:dmi:bvn*:bvr*:bd*:svnAcer*:pn*:*
OTOH, ":pn*" is kept. This is because almost patterns include ":pn*", and if we
skip it, we should make it clear that this is on purpose, that we really want to
match any product name.
The python script to generate autosuspend rules is updated to use ":*" too.
Inspired by https://github.com/systemd/systemd/pull/17281#discussion_r501489750.
Different bios version includes different pn. Submitted change fixed my inverted screen after reboot.
I've stepped back to the bios version 5.11 28.04.2016 in an attempt to troubleshoot Windows Hello locking the sign
in on reboot. The screen again rotated, but 90 degrees to the right. I created a new hwdb line to resolve that issue. The bios version changes the dmi string including the svn and pn.
This fixes the broken rotation on the Acer Spin 1 I recently bought (exact model is SP111-34N-P4BZ).
It is possible that all of the SP111 models would use the same matrix, but to be on the safe side, I added a new entry.
Commit 3d864658ea ("hwdb: assume all Medion Akoya E-models have the
same matrix"), unified the entries for most Medion Akoya E* modes,
including the entry for the Medion Akoya E2215T MD60198.
But the accelerometer on the E2215T has an ACPI-id of KIOX000A, rather
then KIOX010A as the other models have, so that commit broke the
ACCEL_MOUNT_MATRIX for the E2215T.
Add a separate match for the E2215T so that it gets the correct
ACCEL_MOUNT_MATRIX again.
Unlike newer Medion Akoya E* models for which we have a generic
wildcard match, this model uses a somewhat older KIOX0009 accelerometer.
Not only does our generic catch all not match, we also need a different
matrix for this model, so add a model-specific entry for it.
the modalias reported by udev is acpi:BOSC0200:BOSC0200: but the rules
only matched acpi:BOSC0200:BOSC0200 (without the trailing colon)
change to acpi:BOSC0200* as in other models
This commit fix the accelerometer orientation on the Jumper EZpad
Go tablet.
The tablet does not have its product name filled in dmi table, make
the match string a bit generic. Here we assume that the use of a
KIOX000A + bios-vendor + chassis-type combo is unique enough to
match the currently available product in Jumper's x86 tablet series.
For future reference, as in 2019, the tablet has a dmialias of:
dmi:bvnAmericanMegatrendsInc.:bvrZB-BI-11.6-SF133AR200-059-J \
:bd05/21/2019:svnjumper:pnEZpad:pvrTobefilledbyO.E.M.:rvnTob \
efilledbyO.E.M.:rnTobefilledbyO.E.M.:rvrTobefilledbyO.E.M.:c \
vnTobefilledbyO.E.M.:ct31:cvrTobefilledbyO.E.M.:
