IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
This makes users can configure DHCPv4 client with ClientIdentifier=duid-only.
If set so, then DHCP client sends only DUID as the client identifier.
This may not be RFC compliant, but some setups require this.
Closes#7828.
The DHCPv6 client can obtain configuration parameters from a
DHCPv6 server through a rapid two-message exchange solicit and reply).
When the rapid commit option is enabled by both the DHCPv6 client and
the DHCPv6 server, the two-message exchange is used, rather than the default
four-method exchange (solicit, advertise, request, and reply). The two-message
exchange provides faster client configuration and is beneficial in environments
in which networks are under a heavy load.
Closes#5845
This adds a simple condition/assert/match to the service manager, to
udev's .link handling and to networkd, for matching the kernel version
string.
In this version we only do fnmatch() based globbing, but we might want
to extend that to version comparisons later on, if we like, by slightly
extending the syntax with ">=", "<=", ">", "<" and "==" expressions.
RequiredForOnline= denotes a link/network that does/does not require being up
for systemd-networkd-wait-online to consider the system online; this makes it
possible to ignore devices without modifying parameters to wait-online.
Starting with kernel version 4.8 the kernel has a single `l3mdev` rule
that handles this. This rule will be created when the first VRF device
is added.
Typically when DHCP server sets MTU it is a lower one. And a lower than usual
MTU is then thus required on said network to have operational networking. This
makes networkd's dhcp client to work in more similar way to other dhcp-clients
(e.g. isc-dhcp). In particular, in a cloud setting, without this default
instances have resulted in timing out talking to cloud metadata source and
failing to provision.
This does not change this default for the Annonymize code path.
Routing Policy rule manipulates rules in the routing policy database control the
route selection algorithm.
This work supports to configure Rule
```
[RoutingPolicyRule]
TypeOfService=0x08
Table=7
From= 192.168.100.18
```
```
ip rule show
0: from all lookup local
0: from 192.168.100.18 tos 0x08 lookup 7
```
V2 changes:
1. Added logic to handle duplicate rules.
2. If rules are changed or deleted and networkd restarted
then those are deleted when networkd restarts next time
V3:
1. Add parse_fwmark_fwmask
Add prefix delegation documentation covering IPv6PrefixDelegation=
setting in the Network section as well as all the parameters and
the IPv6PrefixDelegation and IPv6Prefix sections implemented so
far, including DNS= and DNSLifetimeSec= settings.
DHCP responses could include static routes, but unfortunately not an
option to tell what scope to use. So it's important that the client sets
it properly.
This mimics what the `ip route add` command does when adding a static
route without an explicit scope:
* If the destination IP is on the local host, use scope `host`
* Otherwise if the gateway IP is null (direct route), use scope `link`
* If anything else, use the current default `global`.
Fixes#5979.
This work based on Tom's original patch
teg@1312172
By setting GatewayOnlink=yes, the kernel will assume that the gateway is onlink
even if there is no route to it.
Resolves issue #1283.
Allow setting bridge port priority in the Bridge section of the network file,
similar to e.g. port path cost setting.
Set the default to an invalid value of 128, and only set the port priority when
it's not 128. Unlike e.g. path cost, zero is a valid priority value.
Add a networkd-test.py to check that bridge port priority is correctly set.
Incidently, fix bridge port cost type and document valid ranges.
Per man:file-hierarchy(7), /lib is just a compatibility symlink; the
other manpages also refer to /usr/lib.
Found with:
git grep -P '(?<!/usr|/var|local)/lib' man/
IPv6 Neighbor discovery proxy is the IPv6 equivalent to proxy ARP for IPv4.
It is required when ISPs do not unconditional route IPv6 subnets
to their designated target, but expect neighbor solicitation messages
for every address on a link.
A variable IPv6ProxyNDPAddress= is introduced to the [Network] section,
each representing a IPv6 neighbour proxy entry in the neighbour table.
We shouldn't just have snippets of configuration, but instead
examples which show all the parts necessary to build a certain kind
of setup, with short explanations.
