IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
This removes the ability to configure which cgroup controllers to mount
together. Instead, we'll now hardcode that "cpu" and "cpuacct" are
mounted together as well as "net_cls" and "net_prio".
The concept of mounting controllers together has no future as it does
not exist to cgroupsv2. Moreover, the current logic is systematically
broken, as revealed by the discussions in #10507. Also, we surveyed Red
Hat customers and couldn't find a single user of the concept (which
isn't particularly surprising, as it is broken...)
This reduced the (already way too complex) cgroup handling for us, since
we now know whenever we make a change to a cgroup for one controller to
which other controllers it applies.
The concept is redundant and predates the special chars that do the same
in ExecStar=. Let's settle on advertising just the latter, and hide
PermissionsStartOnly= from the docs (even if we continue supporting it).
Normally, we want to immediately quit on ^C. But when we are running under
less, people may set SYSTEMD_LESS without K, in which case they can use ^C to
communicate with less, and e.g. start and stop following input.
Fixes#6405.
Rebooting to set change the kernel command line to set some udev parameters is
inconvenient. Let's allow setting more stuff in the config file.
Also drop quotes from around "info" in udev.conf. We need to accept them for
compatibility, but there is no reason to use them.
In a way this is a follow-up for
a2d1fb882c, but adds a similar warning for
PIDFile=.
There's a much stronger case for doing this kind of notification in
tmpfiles.d (since it helps relating lines to each other for the purpose
of merging them). Doing this for PIDFile= is mostly about being
systematic and copying tmpfiles.d/ behaviour here.
While we are at it, let's also support relative filenames in PIDFile=
now, and prefix them with /run, to make them absolute.
Fixes: #10657
This adds a new pair of API calls sd_bus_set_close_on_exit() and
sd_bus_get_close_on_exit(). They control whether an sd_bus object
attached to a an sd-event loop shall automatically be flushed/closed
when the event loop goes down. Usually that's a good thing, except for
very few cases where the bus connection is longer living than the event
loop it is attached on. Specifically, this is the case for nspawn, where
we run the event loop only while the container is up, but afterwards
still want to be able to use the bus connection.
It's obsolete, stop mentioning it. Let's not confuse people suggests it
would be OK to use that, because it really isn't anymore, and it gives
us trouble with merging idenctical lines.
This reorganizes the systemd.timer man page so that it doesn't claim
there are no implicit dependencies right after specifying the implicit
dependencies, and so that it matches the other man pages for units. This
fixes a mistake introduced by commit aed5cb03db.
A simple copy+paste mistake, since the reference to
systemd-localed.service was added to both locale.conf(5) and
vconsole.conf(5) in the same commit (8968e36f21).
This changes the ProtectSystem= documentation to refer in more explicit
words to the restrictions of ReadOnlyPath=, as sugegsted in #9857.
THis also extends the paragraph in ReadOnlyPath= that explains the hole.
Fixes: #9857
In the documentation for ConditionXYZ= we claimed that AssertXYZ= would
have an effect on unit state (which is wrong), while at the
documentation for AssertXYZ= we said it only has an effect on the job,
but not the unit (which is right). Let's fix this contradiction, and
only claim the latter.
Also, fix a couple of other things (for example, stop talking about a
"failure state", but let's just expressly called it "the 'failed' state",
as that's the actual name of that state.
Finally, let's emphasize again when the conditions/assertions are
executed, and that they hence are not useful to conditionalize deps.
Fixes: #10433
In the default journalctl output, unprintable entries are abbreviated as
“[<amount> blob data]”; using the same term in the documentation helps
users to quickly discover the option they need to add in order to see
those entries.
The &MEMORY_ACCOUNTING_DEFAULT; resolves to "yes" or "no" while the rest
of the paragraph talked about "on" and "off". Let's adjust this and
stick to "yes" and "no"...
Quite frankly I think it's not a particularly good idea to change the
docs based configuration changes... THis can only be incomplete, and the
wording is still very awkward since we repeat the same sentence twice.
This is useful for a couple of cases, I'm mostly interested in case #1:
1. Verifying "reasonable" values in a trivially scriptable way
2. Debugging unexpected time span parsing directly
Test Plan:
```
% build/systemd-analyze timespan 20
Original: 20
μs: 20
Human: 20us
% build/systemd-analyze timespan 20ms
Original: 20ms
μs: 20000
Human: 20ms
% build/systemd-analyze timespan 20z
Failed to parse time span '20z': Invalid argument
```
Add LogRateLimitIntervalSec= and LogRateLimitBurst= options for
services. If provided, these values get passed to the journald
client context, and those values are used in the rate limiting
function in the journal over the the journald.conf values.
Part of #10230
C.f. 287419c119: 'systemctl exit 42' can be
used to set an exit value and pulls in exit.target, which pulls in systemd-exit.service,
which calls org.fdo.Manager.Exit, which calls method_exit(), which sets the objective
to MANAGER_EXIT. Allow the same to happen through SuccessAction=exit.
v2: update for 'exit' and 'exit-force'
We would accept e.g. FailureAction=reboot-force in user units and then do an
exit in the user manager. Let's be stricter, and define "exit"/"exit-force" as
the only supported actions in user units.
v2:
- rename 'exit' to 'exit-force' and add new 'exit'
- add test for the parsing function
FailureAction=/SuccessAction= were added later then StartLimitAction=, so it
was easiest to refer to the existing description. But those two settings are
somewhat simpler (they just execute the action unconditionally) while
StartLimitAction= has additional timing and burst parameters, and they are
about to take on a more prominent role, so let's move the description of
allowed values.
The term “positive” is often read to exclude 0 (though “strictly
positive” is sometimes used to clarify this), so let’s explicitly state
that --lines=0 is legal and completely disables journal output.
Motivated by an answer on StackExchange [1].
[1]: https://unix.stackexchange.com/a/475068/44049
These man pages list references to the various sd_event_add_xyz() calls
at the bottom, but sd_event_add_inotify() was never added there.
Moreover, some list references to sd_event_add_post() and
sd_event_add_exit() even though these have shared man pages with
sd_event_add_defer(), and given that the "SEE ALSO" section should
probably reference pages instead of functions let's drop this.
Then, let's always specify the sd_event_add_xyz() calls in the same
order.
Finally, in the sd_event_new(3) text explaining the basic logic,
actually mention sd_event_add_post() and sd_event_add_exit() as well, as
in that case we actually want to list functions, not man pages.
Also, while we are at it, beef it up, by adding json-seq support (i.e.
https://tools.ietf.org/html/rfc7464). This is particularly useful in
conjunction with jq's --seq switch.
A new switch "-j" or "--json=" is added which transforms dbus
marshalling into json. This is extremely useful in combination with
tools such as "jq" to process bus calls further.
Until a core dump handler is installed by systemd-sysctl, the generation of
core dump for services is turned OFF which can make the debugging of the early
boot process harder especially since there's no easy way to restore the core
dump generation.
This patch introduces a new kernel command line option which specifies an
absolute path where the kernel should write the core dump file when an early
process crashes.
This will take effect until systemd-coredump (or any other handlers) takes
over.
let's add an env var for this, as this really shouldn't be a top-level
feature, as it turning off the validity checks certainly isn't
advisable.
Fixes: #4925
/etc/systemd/sleep.conf gains four new switches:
AllowSuspend=, AllowHibernation=, AllowSuspendThenHibernate=, AllowHybridSleep=.
Disabling specific modes was already possible by masking suspend.target,
hibernate.target, suspend-then-hibernate.target, or hybrid-sleep.target.
But this is not convenient for distributions, which want to set some defaults
based on what they want to support. Having those available as configuration
makes it easy to put a config file in /usr/lib/systemd/sleep.conf.d/ that
overrides the defaults and gives instructions how to undo that override.
