IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
The service will use either, so let's make sure either of them starts
the service as well.
(cherry picked from commit c0aeff4b999318d4da48328fff0ea93c8c457ace)
(cherry picked from commit c15d8f5c4490e2a4646bd75d18ecd5baca1225c2)
Otherwise, IPv6 enable/disable setting may be changed after resolved is
started.
(cherry picked from commit 6e6b59ed00332e4d8061b2f0f6bc0945d4fced64)
(cherry picked from commit ae2c69e8e61032417ce712ec95df5629c5799d37)
modprobe treats "-" and "_" interchangeably, thereby avoiding frequent
errors because some module names contain dashes and others underscores.
Because modprobe@.service unescapes the instance name, an attempt to
start "modprobe@dm-crypt.service" will run "modprobe -abq dm/crypt",
which is doomed to fail. "modprobe@dm_crypt.service" will work as
expected. Thus unescaping the instance name has surprising side effects.
Use "%i" instead.
(cherry picked from commit bf25cf6c49253e922524dfa0e7960f554838f18b)
As systemd-journal-upload deals mostly with remote servers, add
some failsafes to its unit to restart on failures.
```
[Service]
Restart=on-failure
RestartSteps=10
RestartMaxDelaySec=60
```
(cherry picked from commit c08bec1587e102dd0435969e422288d69431e92c)
Follow-up for d120ce478dc0043c89899799b5c1aaf62901bea9
blockdev@.target is used as a synchronization point between
the mount unit and corresponding systemd-cryptsetup@.service.
After the mentioned commit, it doesn't get a stop job enqueued
during shutdown, and thus the stop job for systemd-cryptsetup@.service
could be run before the mount unit is stopped.
Therefore, let's make blockdev@.target conflict with umount.target,
which is also what systemd-cryptsetup@.service does.
Fixes#29336
(cherry picked from commit 99f360a46b6304d87a483be8e09d5e5176be13aa)
- mostly: usecase -> use case
- continously -> continuously
- single typos in docs/FILE_DESCRIPTOR_STORE.md
(cherry picked from commit 7227dd816f0bfe0e91b248d74d59067082dd2fbd)
This makes tmpfiles, sysusers, and udevd invoked in the following order:
1. systemd-tmpfiles-setup-dev-early.service
Create device nodes gracefully, that is, create device nodes anyway
by ignoring unknown users and groups.
2. systemd-sysusers.service
Create users and groups, to make later invocations of tmpfiles and
udevd can resolve necessary users and groups.
3. systemd-tmpfiles-setup-dev.service
Adjust owners of previously created device nodes.
4. systemd-udevd.service
Process all devices. Especially to make block devices active and can
be mountable.
5. systemd-tmpfiles-setup.service
Setup basic filesystem.
Follow-up for b42482af904ae0b94a6e4501ec595448f0ba1c06.
Fixes#28653.
Replaces #28681 and #28732.
(cherry picked from commit bb7f485f4bddd57bbf50739bafa43d127bab59d6)
If emergency.target is started while initrd-parse-etc.service/start is queued,
the initrd-parse-etc job did not get canceled. In parallel to the emergency
units, it eventually runs the service, which starts initrd-cleanup.service,
which in turn isolates initrd-switch-root.target. This stops the emergency
units and effectively starts the initrd boot process again, which likely
fails again like the initial attempt. The system is thus stuck in an endless
loop, never really reaching emergency.target.
With this conflict added, starting emergency.target automatically cancels
initrd-parse-etc.service/start, avoiding the loop.
(cherry picked from commit 327cd2d3db703555f8d572b4cd055fbe55e1068b)
In it's latest release, agetty will support reading the agetty.autologin
and login.noauth credentials, so let's make sure we import those in our
getty units so they're available to agetty to read.
Some of the new units using systemd-pcrphase are missing the --graceful
flag which causes them to error if the tpm libraries are not installed.
Add --graceful just like in the other pcrphase units to make systemd-pcrphase
exit gracefully if the tpm libraries are missing.
The service has Type=oneshot, which means that the default value of SuccessExitStatus=0.
When multiple vtcon devices are detected, udev will restart the service after each
one. If this happens quickly enough, the old instance will get SIGTERM while it is
still running:
[ 5.357341] (udev-worker)[593]: vtcon1: /usr/lib/udev/rules.d/90-vconsole.rules:12 RUN '/usr/bin/systemctl --no-block restart systemd-vconsole-setup.service
[ 5.357439] (udev-worker)[593]: vtcon1: Running command "/usr/bin/systemctl --no-block restart systemd-vconsole-setup.service"
[ 5.357485] (udev-worker)[593]: vtcon1: Starting '/usr/bin/systemctl --no-block restart systemd-vconsole-setup.service'
[ 5.357537] (udev-worker)[609]: vtcon0: /usr/lib/udev/rules.d/90-vconsole.rules:12 RUN '/usr/bin/systemctl --no-block restart systemd-vconsole-setup.service
[ 5.357587] (udev-worker)[609]: vtcon0: Running command "/usr/bin/systemctl --no-block restart systemd-vconsole-setup.service"
[ 5.357634] (udev-worker)[609]: vtcon0: Starting '/usr/bin/systemctl --no-block restart systemd-vconsole-setup.service'
...
[ 5.680529] systemd[1]: systemd-vconsole-setup.service: Trying to enqueue job systemd-vconsole-setup.service/restart/replace
[ 5.680565] systemd[1]: systemd-vconsole-setup.service: Merged into running job, re-running: systemd-vconsole-setup.service/restart as 557
[ 5.680600] systemd[1]: systemd-vconsole-setup.service: Enqueued job systemd-vconsole-setup.service/restart as 557
...
[ 5.682334] systemd[1]: Received SIGCHLD from PID 744 ((le-setup)).
[ 5.682377] systemd[1]: Child 744 ((le-setup)) died (code=killed, status=15/TERM)
[ 5.682407] systemd[1]: systemd-vconsole-setup.service: Child 744 belongs to systemd-vconsole-setup.service.
[ 5.682436] systemd[1]: systemd-vconsole-setup.service: Main process exited, code=killed, status=15/TERM
[ 5.682471] systemd[1]: systemd-vconsole-setup.service: Failed with result 'signal'.
[ 5.682518] systemd[1]: systemd-vconsole-setup.service: Service will not restart (manual stop)
[ 5.682552] systemd[1]: systemd-vconsole-setup.service: Changed stop-sigterm -> failed
This is expected and not a problem. Let's treat SIGTERM as success so we don't
get this spurious "failure".
"Setup" is a noun, and the expected order is "<adjective> <noun>".
("Set up" is the verb. But we want a noun here, so that we can say
e.g. "Starting Virtual Console Setup".)
Let's make our units more robust to being added to an initrd:
1. systemd-boot-update only makes sense if sd-boot is available in /usr/
to copy into the ESP. This is generally not the case in initrds, and
even if it was, we shouldn't update the ESP from the initrd, but from
the host instead.
2. The rfkill services save/restore rfkill state, but that information
is only available once /var/ is mounted, which generally happens
after the initrd transition.
3. utmp management is partly in /var/, and legacy anyway, hence don't
bother with it in the initrd.
Let's rename the unit to systemd-battery-check.service. We usually want
to name our own unit files like our tools they wrap, in particular if
they are entirely defined by us (i.e. not just wrappers of foreign
concepts)
While we are at it, also hook this in from initrd.target, and order it
against initrd-root-device.target so that it runs before the root device
is possibly written to (i.e. mounted or fsck'ed).
This is heavily inspired by @aafeijoo-suse's PR #28208, but quite
different ;-)
Follow-ups for e3d4148d50909119c4e9327e6ad96d3ca7f4661a.
- add reference to initrd-battery-check.service in man page, and move
its section from 1 to 8,
- add link to man page in help message,
- introduce ERRNO_IS_NO_PLYMOUTH(),
- propagate error in battery_check_send_plymouth_message(),
- rename battery_check_send_plymouth_message() -> plymouth_send_message(),
- return earlier when the first battery level check passed to reduce
indentation,
- fix potential use of invalid fd on battery restored,
- do not use emoji for /dev/console,
- add simple test (mostly for coverity),
etc, etc...
This also merges two arrays units and in_units, and uses dictionary
for declaring units.
This also fixes the condition handling, that previously only two
conditions were handled and rests were ignored.
This adds a new mechanism for rebooting, a form of "userspace reboot"
hereby dubbed "soft-reboot". It will stop all services as in a usual
shutdown, possibly transition into a new root fs and then issue a fresh
initial transaction. The kernel is not replaced.
File descriptors can be passed over, thus opening the door for leaving
certain resources around between such reboots.
Usecase: this is an extremely quick way to reset userspace fully when
updating image based systems, without going through a full
hardware/firmware/boot loader/kernel/initrd cycle. It minimizes "grayout time"
for OS updates. (In particular when combined with kernel live patching)
We want that cryptsetup/veritysetup devices can stick around until the
very end, as well as the users of them which might depend on
blockdev@.target for the devices. Hence leave the targets around till
the very end.
Note that their runtime is managed via StopWhenUnneeded= anyway, hence
unless their are volumes that actually survive still the very end they
target units will still be stopped.
This mimics what we already have for cryptsetup services: the slice they
are placed in (they have their own slice since that's what we do by
default for instantiated services) shouldn't conflict with
shutdown.target, so that veritysetup services can stay around until the
very end (which is what we want for the root and usr verity volumes).
It's literally just a copy of the same unit we already have for
cryptsetup, just with an updated description string.
local-fs-pre.target is a passive unit, which means that it is supposed to be
pulled in by everything that is ordered before it. We had
Before=local-fs-pre.target, so add Wants= too.
I don't expect this to change anything. Instead, just make things follow the
docs so it's easier to reason about the dependency set.
We may copy files from factory to /etc. The default mkosi config has
factory/etc/vconsole.conf. systemd-firstboot would race with tmpfiles-setup,
and sometimes ask for the keymap, and sometimes not.
I guess that if there are files in factory, we shouldn't ask the user for
the same configuration.
Requested in https://github.com/systemd/systemd/pull/27755#pullrequestreview-1443489520.
I dropped the info message about the job being requested, because we get
fairly verbose logs from starting the unit, and the additional message isn't
useful.
In the unit, the ordering before systemd-vconsole-setup.service is dropped,
because now it needs to happen in parallel, while systemd-firstboot.service
is running. This means that we may potentially execute vconsole-setup twice,
but it's fairly quick, so this doesn't matter much.
Let's explicitly order these against initrd-switch-root.target, so
that they are properly shut down before we switch root. Otherwise,
there's a race condition where networkd might only shut down after
switching root and after we've already we've loaded the unit graph,
meaning it won't be restarted in the rootfs.
Fixes#27718
We would create root account from sysusers or from firstboot, depending on
which one ran earlier. Since firstboot offers more options, in particular can
set the root password, we needed to order it earlier. This created an ugly
ordering requirement:
systemd-sysusers.service > systemd-firstboot.service > ... >
systemd-remount-fs.service > systemd-tmpfiles-setup-dev.service >
systemd-sysusers.service
We want sysusers.service to create basic users, so we can create nodes in dev,
so we can operate on block devices and such, so that we can resize and remount
things. But at the same time, systemd-firstboot.service can only work if it is
run early, before systemd-sysusers.service has created /etc/passwd. We can't
have it both ways: the units that want to have a fully writable root file
system cannot be ordered before units which are required to do file system
preparation.
Instead of trying to order firstboot very early, let's let it do its thing even
if it is started later. Instead of refusing to create to the root account if
/etc/passwd and /etc/shadow exist, actually check if the account is configured.
Now sysusers writes root account with password PASSWORD_UNPROVISIONED
("!unprovisioned"), and then firstboot checks for this, and will configure root
in this case.
This allows sysusers to be executed earlier (or accounts to be set up earlier
in another way).
This effectively reverts b825ab1a99b69956057c79838faaf7b44afee474.
We want to call systemd-tmpfiles-setup-dev.service to create /dev/fuse and
other device nodes so that module probing will work. But it is possible that
when we're in first boot, some users or groups need to be created by
systemd-sysusers first. But it is also possible that systemd-sysusers cannot
actually execute configuration because the root partition is not fully writable
yet. So let systemd-tmpfiles-setup-dev.service run earlier, possibly without
all users and groups in place. Since systemd-tmpfiles-setup-dev.service writes
to /dev only, it doesn't care how the root partition is mounted. In this early
run, some some nodes might be created with default permissions (i.e. not
accessible to non-root users or groups). This should be OK for the early boot
phase. Afterwards, we let systemd-tmpfiles-setup.service execute full
configuration. We will configure any files in /dev twice, but considering that
there's only a few of them and that the second run should only adjust ownership
and permissions, this should be OK. This way, we avoid the dependency loop.
As with other units, stopping of the automount requires actual work,
and without the ordering dependency systemd might not execute the stop
job before shutdown.target is reached and units ordered after that are
executed.
I have a system with /usr/lib/repart.d/50-root.conf with GrowFileSystem=yes.
The partition wouldn't be resized in the initrd, because
ConditionDirectoryNotEmpty=|/sysusr/usr/lib/repart.d was evaluated very early,
before /sysroot was mounted. There was no ordering dependency between
systemd-repart.service and sysroot.mount. (There was After=initrd-usr-fs.target,
but it seems to be only referred to by systemd-fstab-generator, which in my
case doesn't even run, because there's no fstab.)
But in fact, we neeed to run systemd-repart in the initrd only in limited
circumstances: when we need to create the root device based on config under
sysusr.mount. If there is config on the root device, it can be executed in
the host system, early during boot. Thus, let's remove the condition on
/sysroot/…. Without an ordering dependency on sysroot.mount, it was subject to
a race condition anyway. (A race condition with a low probability of "winning",
because systemd-repart.service has no dependencies, but sysroot.mount requires
a device to be detected and the mount to happen.)
The other problem was that systemd-repart.service didn't have the ordering wrt.
initrd-switch-root.target, so it was subject to the same race condition that
was fixed for other units in 7c0e2b555968d70ac563a37e32a6931ee90961a6. (If the
systemd-repart.service/stop job is slow, we could end up not restarting
systemd-repart.service in the host system.)
With the changes here, I see systemd-repart.service/start running twice:
in the initrd it is skipped because the conditions fail, and then in the
host system it runs normally.
Note: support for /sysroot is retained in systemd-repart code. I don't see a
strong reason to remove it, since it may still be useful to people invoking
repart in the initrd in other circumstances.
No functional change, just a cleanup to make the subsequent changes easier to
see. This is a continuation of 9810e419425263bde86787bc21251f1ad3c35628
> The block is reordered and split to have:
> 1. description + documentation
> 2. (optionally) conditions
> 3. all the dependencies
The dependencies for shutdown.target are listed separately because they are the
other deps are for startup, and shutdown.target only matter much later.
Previous patch to add an implicit dependency effectively orders various getty
services after systemd-vconsole-setup.service. But I think it's cleaner to also
order the service before sysinit.target, like it was before
8125e8d38e3aa099c7dce8b0161997b8842aebdc. There might be units which don't do
use TTYVHangup= but would like to have the console fully initialized.
Also, add a manual ordering to debug-shell.service, because it has
ImplicitDependencies=no. This might delay debug-shell.service a bit, but
systemd-vconsole-setup.service has no dependencies and should be very quick, so
this should not be noticable in practice. Without the ordering, the terminal
might not have a key map loaded, making debug-shell.service hard to use.
Those two units had this ordering conditionalized on HAVE_SYSV_COMPAT. This
seems strange. 45e27532971ac84e835a2879df510a581f933fcd added the ordering
differently for those two files without any comment, and I think it was just
pasted or scripted erroneously.
These are all services that valid to be run in the initrd, so let's
make sure they have the appropriate dependencies on
initrd-switch-root.target so that they are stopped when we're about
to switch root.
We hardcode the path the initrd uses to prepare the final mount point at
so many places, let's also imply it in "systemctl switch-root" if not
specified.
This adds the fallback both to systemctl and to PID 1 (this is because
both to — different – checks on the path).
Let's make use of the new DelegateSubgroup= feature and delegate the
/supervisor/ subcgroup already to nspawn, so that moving the supervisor
process there is unnecessary.
