systemd-stable/man/systemd-journald.service.xml

<?xml version='1.0'?> <!--*-nxml-*-->
<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
  "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd">

<!--
  SPDX-License-Identifier: LGPL-2.1+

  This file is part of systemd.

  Copyright 2010 Lennart Poettering

  systemd is free software; you can redistribute it and/or modify it
  under the terms of the GNU Lesser General Public License as published by
  the Free Software Foundation; either version 2.1 of the License, or
  (at your option) any later version.

  systemd is distributed in the hope that it will be useful, but
  WITHOUT ANY WARRANTY; without even the implied warranty of
  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
  Lesser General Public License for more details.

  You should have received a copy of the GNU Lesser General Public License
  along with systemd; If not, see <http://www.gnu.org/licenses/>.
-->

<refentry id="systemd-journald.service">

  <refentryinfo>
    <title>systemd-journald.service</title>
    <productname>systemd</productname>

    <authorgroup>
      <author>
        <contrib>Developer</contrib>
        <firstname>Lennart</firstname>
        <surname>Poettering</surname>
        <email>lennart@poettering.net</email>
      </author>
    </authorgroup>
  </refentryinfo>

  <refmeta>
    <refentrytitle>systemd-journald.service</refentrytitle>
    <manvolnum>8</manvolnum>
  </refmeta>

  <refnamediv>
    <refname>systemd-journald.service</refname>
    <refname>systemd-journald.socket</refname>
    <refname>systemd-journald-dev-log.socket</refname>
    <refname>systemd-journald-audit.socket</refname>
    <refname>systemd-journald</refname>
    <refpurpose>Journal service</refpurpose>
  </refnamediv>

  <refsynopsisdiv>
    <para><filename>systemd-journald.service</filename></para>
    <para><filename>systemd-journald.socket</filename></para>
    <para><filename>systemd-journald-dev-log.socket</filename></para>
    <para><filename>systemd-journald-audit.socket</filename></para>
    <para><filename>/usr/lib/systemd/systemd-journald</filename></para>
  </refsynopsisdiv>

  <refsect1>
    <title>Description</title>

    <para><filename>systemd-journald</filename> is a system service
    that collects and stores logging data. It creates and maintains
    structured, indexed journals based on logging information that is
    received from a variety of sources:</para>

    <itemizedlist>
      <listitem><para>Kernel log messages, via kmsg</para></listitem>

      <listitem><para>Simple system log messages, via the <filename>libc</filename> <citerefentry
      project='man-pages'><refentrytitle>syslog</refentrytitle><manvolnum>3</manvolnum></citerefentry>
      call</para></listitem>

      <listitem><para>Structured system log messages via the native
      Journal API, see
      <citerefentry><refentrytitle>sd_journal_print</refentrytitle><manvolnum>4</manvolnum></citerefentry></para></listitem>

      <listitem><para>Standard output and standard error of service units. For further details see
      below.</para></listitem>

      <listitem><para>Audit records, originating from the kernel audit subsystem</para></listitem>
    </itemizedlist>

    <para>The daemon will implicitly collect numerous metadata fields
    for each log messages in a secure and unfakeable way. See
    <citerefentry><refentrytitle>systemd.journal-fields</refentrytitle><manvolnum>7</manvolnum></citerefentry>
    for more information about the collected metadata.
    </para>

    <para>Log data collected by the journal is primarily text-based but can also include binary data where
    necessary. Individual fields making up a log record stored in the journal may be up to 2^64-1 bytes in size.</para>

    <para>The journal service stores log data either persistently below <filename>/var/log/journal</filename> or in a
    volatile way below <filename>/run/log/journal/</filename> (in the latter case it is lost at reboot). By default, log
    data is stored persistently if <filename>/var/log/journal/</filename> exists during boot, with an implicit fallback
    to volatile storage otherwise. Use <varname>Storage=</varname> in
    <citerefentry><refentrytitle>journald.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry> to configure
    where log data is placed, independently of the existence of <filename>/var/log/journal/</filename>.</para>

    <para>On systems where <filename>/var/log/journal/</filename> does not exist yet but where persistent logging is
    desired (and the default <filename>journald.conf</filename> is used), it is sufficient to create the directory, and
    ensure it has the correct access modes and ownership:</para>

    <programlisting>mkdir -p /var/log/journal
systemd-tmpfiles --create --prefix /var/log/journal</programlisting>

    <para>See
    <citerefentry><refentrytitle>journald.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>
    for information about the configuration of this service.</para>
  </refsect1>

  <refsect1>
    <title>Stream logging</title>

    <para>The systemd service manager invokes all service processes with standard output and standard error connected
    to the journal by default. This behaviour may be altered via the
    <varname>StandardOutput=</varname>/<varname>StandardError=</varname> unit file settings, see
    <citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry> for details. The
    journal converts the log byte stream received this way into individual log records, splitting the stream at newline
    (<literal>\n</literal>, ASCII <constant>10</constant>) and <constant>NUL</constant> bytes.</para>

    <para>If <filename>systemd-journald.service</filename> is stopped, the stream connections associated with all
    services are terminated. Further writes to those streams by the service will result in <constant>EPIPE</constant>
    errors. In order to react gracefully in this case it is recommended that programs logging to standard output/error
    ignore such errors. If the <constant>SIGPIPE</constant> UNIX signal handler is not blocked or turned off, such
    write attempts will also result in such process signals being generated, see
    <citerefentry><refentrytitle>signal</refentrytitle><manvolnum>7</manvolnum></citerefentry>. To mitigate this issue,
    systemd service manager explicitly turns off the <constant>SIGPIPE</constant> signal for all invoked processes by
    default (this may be changed for each unit individually via the <varname>IgnoreSIGPIPE=</varname> option, see
    <citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry> for
    details). After the standard output/standard error streams have been terminated they may not be recovered until the
    services they are associated with are restarted. Note that during normal operation,
    <filename>systemd-journald.service</filename> stores copies of the file descriptors for those streams in the
    service manager. If <filename>systemd-journald.service</filename> is restarted using <command>systemctl
    restart</command> or equivalent operation instead of a pair of separate <command>systemctl stop</command> and
    <command>systemctl start</command> commands (or equivalent operations), these stream connections are not terminated
    and survive the restart. It is thus safe to restart <filename>systemd-journald.service</filename>, but stopping it
    is not recommended.</para>

    <para>Note that the log record metadata for records transferred via such standard output/error streams reflect the
    metadata of the peer the stream was originally created for. If the stream connection is passed on to other
    processes (such as further child processes forked off the main service process), the log records will not reflect
    their metadata, but will continue to describe the original process. This is different from the other logging
    transports listed above, which are inherently record based and where the metadata is always associated with the
    individual record.</para>

    <para>In addition to the implicit standard output/error logging of services, stream logging is also available
    via the <citerefentry><refentrytitle>systemd-cat</refentrytitle><manvolnum>1</manvolnum></citerefentry> command
    line tool.</para>

    <para>Currently, the number of parallel log streams <filename>systemd-journald</filename> will accept is limited to
    4096. When this limit is reached further log streams may be established but will receive
    <constant>EPIPE</constant> right from the beginning.</para>
  </refsect1>

  <refsect1>
    <title>Signals</title>

    <variablelist>
      <varlistentry>
        <term>SIGUSR1</term>

        <listitem><para>Request that journal data from
        <filename>/run/</filename> is flushed to
        <filename>/var/</filename> in order to make it persistent (if
        this is enabled). This must be used after
        <filename>/var/</filename> is mounted, as otherwise log data
        from <filename>/run</filename> is never flushed to
        <filename>/var</filename> regardless of the configuration. The
        <command>journalctl --flush</command> command uses this signal
        to request flushing of the journal files, and then waits for
        the operation to complete. See
        <citerefentry><refentrytitle>journalctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>
        for details.</para></listitem>
      </varlistentry>

      <varlistentry>
        <term>SIGUSR2</term>

        <listitem><para>Request immediate rotation of the journal
        files. The <command>journalctl --rotate</command> command uses
        this signal to request journal file
        rotation.</para></listitem>
      </varlistentry>

      <varlistentry>
        <term>SIGRTMIN+1</term>

        <listitem><para>Request that all unwritten log data is written
        to disk. The <command>journalctl --sync</command> command uses
        this signal to trigger journal synchronization, and then waits
        for the operation to complete.</para></listitem>
      </varlistentry>
    </variablelist>
  </refsect1>

  <refsect1>
    <title>Kernel Command Line</title>

    <para>A few configuration parameters from
    <filename>journald.conf</filename> may be overridden on the kernel
    command line:</para>

    <variablelist class='kernel-commandline-options'>
      <varlistentry>
        <term><varname>systemd.journald.forward_to_syslog=</varname></term>
        <term><varname>systemd.journald.forward_to_kmsg=</varname></term>
        <term><varname>systemd.journald.forward_to_console=</varname></term>
        <term><varname>systemd.journald.forward_to_wall=</varname></term>

        <listitem><para>Enables/disables forwarding of collected log
        messages to syslog, the kernel log buffer, the system console
        or wall.
        </para>

        <para>See
        <citerefentry><refentrytitle>journald.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>
        for information about these settings.</para>
        </listitem>

      </varlistentry>
    </variablelist>
  </refsect1>

  <refsect1>
    <title>Access Control</title>

    <para>Journal files are, by default, owned and readable by the
    <literal>systemd-journal</literal> system group but are not
    writable. Adding a user to this group thus enables her/him to read
    the journal files.</para>

    <para>By default, each logged in user will get her/his own set of
    journal files in <filename>/var/log/journal/</filename>. These
    files will not be owned by the user, however, in order to avoid
    that the user can write to them directly. Instead, file system
    ACLs are used to ensure the user gets read access only.</para>

    <para>Additional users and groups may be granted access to journal
    files via file system access control lists (ACL). Distributions
    and administrators may choose to grant read access to all members
    of the <literal>wheel</literal> and <literal>adm</literal> system
    groups with a command such as the following:</para>

    <programlisting># setfacl -Rnm g:wheel:rx,d:g:wheel:rx,g:adm:rx,d:g:adm:rx /var/log/journal/</programlisting>

    <para>Note that this command will update the ACLs both for
    existing journal files and for future journal files created in the
    <filename>/var/log/journal/</filename> directory.</para>
  </refsect1>

  <refsect1>
    <title>Files</title>

    <variablelist>
      <varlistentry>
        <term><filename>/etc/systemd/journald.conf</filename></term>

        <listitem><para>Configure
        <command>systemd-journald</command>
        behavior. See
        <citerefentry><refentrytitle>journald.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>.
        </para></listitem>
      </varlistentry>

      <varlistentry>
        <term><filename>/run/log/journal/<replaceable>machine-id</replaceable>/*.journal</filename></term>
        <term><filename>/run/log/journal/<replaceable>machine-id</replaceable>/*.journal~</filename></term>
        <term><filename>/var/log/journal/<replaceable>machine-id</replaceable>/*.journal</filename></term>
        <term><filename>/var/log/journal/<replaceable>machine-id</replaceable>/*.journal~</filename></term>

        <listitem><para><command>systemd-journald</command> writes
        entries to files in
        <filename>/run/log/journal/<replaceable>machine-id</replaceable>/</filename>
        or
        <filename>/var/log/journal/<replaceable>machine-id</replaceable>/</filename>
        with the <literal>.journal</literal> suffix. If the daemon is
        stopped uncleanly, or if the files are found to be corrupted,
        they are renamed using the <literal>.journal~</literal>
        suffix, and <command>systemd-journald</command> starts writing
        to a new file. <filename>/run</filename> is used when
        <filename>/var/log/journal</filename> is not available, or
        when <option>Storage=volatile</option> is set in the
        <citerefentry><refentrytitle>journald.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>
        configuration file.</para></listitem>
      </varlistentry>

      <varlistentry>
        <term><filename>/dev/kmsg</filename></term>
        <term><filename>/dev/log</filename></term>
        <term><filename>/run/systemd/journal/dev-log</filename></term>
        <term><filename>/run/systemd/journal/socket</filename></term>
        <term><filename>/run/systemd/journal/stdout</filename></term>

        <listitem><para>Sockets and other paths that
        <command>systemd-journald</command> will listen on that are
        visible in the file system. In addition to these, journald can
        listen for audit events using netlink.</para></listitem>
      </varlistentry>
    </variablelist>
  </refsect1>

  <refsect1>
    <title>See Also</title>
    <para>
      <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
      <citerefentry><refentrytitle>journalctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
      <citerefentry><refentrytitle>journald.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
      <citerefentry><refentrytitle>systemd.journal-fields</refentrytitle><manvolnum>7</manvolnum></citerefentry>,
      <citerefentry><refentrytitle>sd-journal</refentrytitle><manvolnum>3</manvolnum></citerefentry>,
      <citerefentry><refentrytitle>systemd-coredump</refentrytitle><manvolnum>8</manvolnum></citerefentry>,
      <citerefentry project='die-net'><refentrytitle>setfacl</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
      <citerefentry><refentrytitle>sd_journal_print</refentrytitle><manvolnum>4</manvolnum></citerefentry>,
      <command>pydoc systemd.journal</command>
    </para>
  </refsect1>

</refentry>