shaba/systemd
1
0
Fork 0
mirror of https://github.com/systemd/systemd.git synced 2024-11-01 09:21:26 +03:00
Code
2d79a0bbb9
systemd/units/systemd-networkd.service.m4.in

52 lines
1.9 KiB
Plaintext
Raw Normal View History

networkd: add a basic network daemon This daemon listens for and configures network devices tagged with 'systemd-networkd'. By default, no devices are tagged so this daemon can safely run in parallel with existing network daemons/scripts. Networks are configured in /etc/systemd/network/*.network. The first .network file that matches a given link is applied. The matching logic is similar to the one for .link files, but additionally supports matching on interface name. The mid-term aim is to provide an alternative to ad-hoc scripts currently used in initrd's and for wired setups that don't change much (e.g., as seen on servers/and some embedded systems). Currently, static addresses and a gateway can be configured. Example .network file: [Match] Name=wlp2s0 [Network] Description=My Network Gateway=192.168.1.1 Address=192.168.1.23/24 Address=fe80::9aee:94ff:fe3f:c618/64
2013-10-17 05:18:36 +04:00
# This file is part of systemd.
#
# systemd is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2.1 of the License, or
# (at your option) any later version.
[Unit]
Description=Network Service
Documentation=man:systemd-networkd.service(8)
units: minor cleanups
2014-06-17 04:18:33 +04:00
ConditionCapability=CAP_NET_ADMIN
networkd: add a basic network daemon This daemon listens for and configures network devices tagged with 'systemd-networkd'. By default, no devices are tagged so this daemon can safely run in parallel with existing network daemons/scripts. Networks are configured in /etc/systemd/network/*.network. The first .network file that matches a given link is applied. The matching logic is similar to the one for .link files, but additionally supports matching on interface name. The mid-term aim is to provide an alternative to ad-hoc scripts currently used in initrd's and for wired setups that don't change much (e.g., as seen on servers/and some embedded systems). Currently, static addresses and a gateway can be configured. Example .network file: [Match] Name=wlp2s0 [Network] Description=My Network Gateway=192.168.1.1 Address=192.168.1.23/24 Address=fe80::9aee:94ff:fe3f:c618/64
2013-10-17 05:18:36 +04:00
DefaultDependencies=no
networkd: allow networkd to start in early boot With the previous improvements, networkd.service's "After=dbus.service" can now be dropped. That ordering effectively forced networkd.service to run in late boot only (dbus.service was rejected to run in early boot in https://bugs.freedesktop.org/show_bug.cgi?id=98254). Fixes #4504
2016-11-22 10:41:51 +03:00
# systemd-udevd.service can be dropped once tuntap is moved to netlink
After=systemd-udevd.service network-pre.target systemd-sysusers.service systemd-sysctl.service
units: minor cleanups
2014-06-17 04:18:33 +04:00
Before=network.target multi-user.target shutdown.target
Conflicts=shutdown.target
networkd: add a basic network daemon This daemon listens for and configures network devices tagged with 'systemd-networkd'. By default, no devices are tagged so this daemon can safely run in parallel with existing network daemons/scripts. Networks are configured in /etc/systemd/network/*.network. The first .network file that matches a given link is applied. The matching logic is similar to the one for .link files, but additionally supports matching on interface name. The mid-term aim is to provide an alternative to ad-hoc scripts currently used in initrd's and for wired setups that don't change much (e.g., as seen on servers/and some embedded systems). Currently, static addresses and a gateway can be configured. Example .network file: [Match] Name=wlp2s0 [Network] Description=My Network Gateway=192.168.1.1 Address=192.168.1.23/24 Address=fe80::9aee:94ff:fe3f:c618/64
2013-10-17 05:18:36 +04:00
Wants=network.target
units: make networkd pull in its own .busname unit The daemon requires the busname unit to operate (on kdbus systems), since it contains the policy that allows it to acquire its service name. This fixes https://bugs.freedesktop.org/show_bug.cgi?id=90287
2015-05-15 23:59:24 +03:00
# On kdbus systems we pull in the busname explicitly, because it
# carries policy that allows the daemon to acquire its name.
Wants=org.freedesktop.network1.busname
After=org.freedesktop.network1.busname
networkd: add a basic network daemon This daemon listens for and configures network devices tagged with 'systemd-networkd'. By default, no devices are tagged so this daemon can safely run in parallel with existing network daemons/scripts. Networks are configured in /etc/systemd/network/*.network. The first .network file that matches a given link is applied. The matching logic is similar to the one for .link files, but additionally supports matching on interface name. The mid-term aim is to provide an alternative to ad-hoc scripts currently used in initrd's and for wired setups that don't change much (e.g., as seen on servers/and some embedded systems). Currently, static addresses and a gateway can be configured. Example .network file: [Match] Name=wlp2s0 [Network] Description=My Network Gateway=192.168.1.1 Address=192.168.1.23/24 Address=fe80::9aee:94ff:fe3f:c618/64
2013-10-17 05:18:36 +04:00
[Service]
networkd: use Type=notify Also start earlier during boot.
2013-11-23 05:07:08 +04:00
Type=notify
networkd: exit on idle We will be woken up on rtnl or dbus activity, so let's just quit if some time has passed and that is the only thing that can happen. Note that we will always stay around if we expect network activity (e.g. DHCP is enabled), as we are not restarted on that.
2015-02-04 17:00:20 +03:00
Restart=on-failure
networkd: add a basic network daemon This daemon listens for and configures network devices tagged with 'systemd-networkd'. By default, no devices are tagged so this daemon can safely run in parallel with existing network daemons/scripts. Networks are configured in /etc/systemd/network/*.network. The first .network file that matches a given link is applied. The matching logic is similar to the one for .link files, but additionally supports matching on interface name. The mid-term aim is to provide an alternative to ad-hoc scripts currently used in initrd's and for wired setups that don't change much (e.g., as seen on servers/and some embedded systems). Currently, static addresses and a gateway can be configured. Example .network file: [Match] Name=wlp2s0 [Network] Description=My Network Gateway=192.168.1.1 Address=192.168.1.23/24 Address=fe80::9aee:94ff:fe3f:c618/64
2013-10-17 05:18:36 +04:00
RestartSec=0
ExecStart=@rootlibexecdir@/systemd-networkd
units: further lock down our long-running services Let's make this an excercise in dogfooding: let's turn on more security features for all our long-running services. Specifically: - Turn on RestrictRealtime=yes for all of them - Turn on ProtectKernelTunables=yes and ProtectControlGroups=yes for most of them - Turn on RestrictAddressFamilies= for all of them, but different sets of address families for each Also, always order settings in the unit files, that the various sandboxing features are close together. Add a couple of missing, older settings for a numbre of unit files. Note that this change turns off AF_INET/AF_INET6 from udevd, thus effectively turning of networking from udev rule commands. Since this might break stuff (that is already broken I'd argue) this is documented in NEWS.
2016-08-26 14:23:27 +03:00
WatchdogSec=3min
networkd: drop CAP_SYS_MODULE Rely on modules being built-in or autoloaded on-demand. As networkd is a network facing service, we want to limits its capabilities, as much as possible. Also, we may not have CAP_SYS_MODULE in a container, and we want networkd to work the same there. Module autoloading does not always work, but should be fixed by the kernel patch f98f89a0104454f35a: 'net: tunnels - enable module autoloading', which is currently in net-next and which people may consider backporting if they want tunneling support without compiling in the modules. Early adopters may also use a module-load.d snippet and order systemd-modules-load.service before networkd to force the module loading of tunneling modules. This sholud fix the various build issues people have reported.
2014-06-02 23:50:50 +04:00
CapabilityBoundingSet=CAP_NET_ADMIN CAP_NET_BIND_SERVICE CAP_NET_BROADCAST CAP_NET_RAW CAP_SETUID CAP_SETGID CAP_SETPCAP CAP_CHOWN CAP_DAC_OVERRIDE CAP_FOWNER
units: switch on ProtectSystem=strict for our long running services Let's step up the protection a notch
2017-02-09 12:58:28 +03:00
ProtectSystem=strict
core: rename ReadOnlySystem= to ProtectSystem= and add a third value for also mounting /etc read-only Also, rename ProtectedHome= to ProtectHome=, to simplify things a bit. With this in place we now have two neat options ProtectSystem= and ProtectHome= for protecting the OS itself (and optionally its configuration), and for protecting the user's data.
2014-06-04 20:07:55 +04:00
ProtectHome=yes
units: further lock down our long-running services Let's make this an excercise in dogfooding: let's turn on more security features for all our long-running services. Specifically: - Turn on RestrictRealtime=yes for all of them - Turn on ProtectKernelTunables=yes and ProtectControlGroups=yes for most of them - Turn on RestrictAddressFamilies= for all of them, but different sets of address families for each Also, always order settings in the unit files, that the various sandboxing features are close together. Add a couple of missing, older settings for a numbre of unit files. Note that this change turns off AF_INET/AF_INET6 from udevd, thus effectively turning of networking from udev rule commands. Since this might break stuff (that is already broken I'd argue) this is documented in NEWS.
2016-08-26 14:23:27 +03:00
ProtectControlGroups=yes
units: turn on ProtectKernelModules= for most long-running services
2017-02-09 13:09:50 +03:00
ProtectKernelModules=yes
units: enable MemoryDenyWriteExecute (#3459) Secure daemons shipped by systemd by enabling MemoryDenyWriteExecute. Closes: #3459
2016-06-08 15:23:37 +03:00
MemoryDenyWriteExecute=yes
units: further lock down our long-running services Let's make this an excercise in dogfooding: let's turn on more security features for all our long-running services. Specifically: - Turn on RestrictRealtime=yes for all of them - Turn on ProtectKernelTunables=yes and ProtectControlGroups=yes for most of them - Turn on RestrictAddressFamilies= for all of them, but different sets of address families for each Also, always order settings in the unit files, that the various sandboxing features are close together. Add a couple of missing, older settings for a numbre of unit files. Note that this change turns off AF_INET/AF_INET6 from udevd, thus effectively turning of networking from udev rule commands. Since this might break stuff (that is already broken I'd argue) this is documented in NEWS.
2016-08-26 14:23:27 +03:00
RestrictRealtime=yes
RestrictAddressFamilies=AF_UNIX AF_NETLINK AF_INET AF_INET6 AF_PACKET
units: make use of @reboot and @swap in our long-running service SystemCallFilter= settings Tighten security up a bit more.
2017-02-09 13:22:08 +03:00
SystemCallFilter=~@clock @cpu-emulation @debug @keyring @module @mount @obsolete @raw-io @reboot @swap
units: set SystemCallArchitectures=native on all our long-running services
2017-02-09 00:32:37 +03:00
SystemCallArchitectures=native
units: switch on ProtectSystem=strict for our long running services Let's step up the protection a notch
2017-02-09 12:58:28 +03:00
ReadWritePaths=/run/systemd
install: do not statically enable systemd-networkd [tomegun: pruned the commit message as not to contradict the follow-up commit]
2014-02-21 07:38:17 +04:00
[Install]
WantedBy=multi-user.target
networkd: support socket activation Still keep the non-socket activation code around for starting from the commandline, but will likely drop that too in the future.
2015-02-02 00:13:26 +03:00
Also=systemd-networkd.socket
Makefile.am: link dbus-org.freedesktop.network1 alias in /etc This makes dbus-org.freedesktop.network1.service like dbus-org.freedesktop.resolve1.service. When systemd-networkd.service is disabled, the alias is also removed.
2017-04-10 18:59:58 +03:00
Alias=dbus-org.freedesktop.network1.service
units: make enablement of s-n-wait-online.service follow systemd-networkd.service (#5635) In 58a6dd15582c038a25bd7059435833943e2e4617 s-n-wait-online.service was added to presets to synchronize the presets with the state after installation. But it is harmful to have s-n-wait-online.service enabled when s-n.service is disabled, because s-n-wait-online.service has Requsite=s-n.service and cannot be activated. Thus remove s-n-wait-online.service from presets again, and let it be enabled whenever s-n.service is enabled. During installation we create enablement symlinks by hand, and since s-n.service is enabled, s-n-w-o.service should be enabled too, so the symlink should still be created during installation. https://bugzilla.redhat.com/show_bug.cgi?id=1433459#c15
2017-03-27 13:55:55 +03:00
# We want to enable systemd-networkd-wait-online.service whenever this service
# is enabled. systemd-networkd-wait-online.service has
# WantedBy=network-online.target, so enabling it only has an effect if
# network-online.target itself is enabled or pulled in by some other unit.
Also=systemd-networkd-wait-online.service
Copy Permalink