2012-11-05 10:09:13 +04:00
#compdef systemctl loginctl journalctl hostnamectl localectl timedatectl systemd-coredumpctl udevadm systemd-analyze systemd-cat systemd-ask-password systemd-cgls systemd-cgtop systemd-delta systemd-detect-virt systemd-inhibit systemd-machine-id-setup systemd-notify systemd-nspawn systemd-tmpfiles systemd-tty-ask-password-agent
_ctls( )
{
local curcontext = " $curcontext " state lstate line
case " $service " in
systemctl)
# -s for aggregated options like -aP
_arguments -s \
{ -h,--help} '[Show help]' \
'--version[Show package version]' \
{ -t,--type= } '[List only units of a particular type]:unit type:(automount device mount path service snapshot socket swap target timer)' \
\* { -p,--property= } '[Show only properties by specific name]:unit property' \
{ -a,--all} '[Show all units/properties, including dead/empty ones]' \
'--failed[Show only failed units]' \
"--full[Don't ellipsize unit names on output]" \
'--fail[When queueing a new job, fail if conflicting jobs are pending]' \
'--ignore-dependencies[When queueing a new job, ignore all its dependencies]' \
'--kill-who=[Who to send signal to]:killwho:(main control all)' \
{ -s,--signal= } '[Which signal to send]:signal:_signals' \
{ -H,--host= } '[Show information for remote host]:userathost:_hosts_or_user_at_host' \
{ -P,--privileged} '[Acquire privileges before execution]' \
{ -q,--quiet} '[Suppress output]' \
'--no-block[Do not wait until operation finished]' \
"--no-wall[Don't send wall message before halt/power-off/reboot]" \
"--no-reload[When enabling/disabling unit files, don't reload daemon configuration]" \
'--no-legend[Do not print a legend, i.e. the column headers and the footer with hints]' \
'--no-pager[Do not pipe output into a pager]' \
'--no-ask-password[Do not ask for system passwords]' \
'--system[Connect to system manager]' \
'--user[Connect to user service manager]' \
'--global[Enable/disable unit files globally]' \
{ -f,--force} '[When enabling unit files, override existing symlinks. When shutting down, execute action immediately]' \
'--root=[Enable unit files in the specified root directory]:directory:_directories' \
'--runtime[Enable unit files only temporarily until next reboot]' \
{ -n,--lines= } '[Journal entries to show]:number of entries' \
{ -o,--output= } '[Change journal output mode]:modes:_outputmodes' \
'*::systemctl command:_systemctl_command'
; ;
loginctl)
_arguments -s \
{ -h,--help} '[Show help]' \
'--version[Show package version]' \
\* { -p,--property= } '[Show only properties by this name]:unit property' \
{ -a,--all} '[Show all properties, including empty ones]' \
'--kill-who=[Who to send signal to]:killwho:(main control all)' \
{ -s,--signal= } '[Which signal to send]:signal:_signals' \
'--no-ask-password[Do not ask for system passwords]' \
{ -H,--host= } '[Show information for remote host]:userathost:_hosts_or_user_at_host' \
{ -P,--privileged} '[Acquire privileges before execution]' \
'--no-pager[Do not pipe output into a pager]' \
'*::loginctl command:_loginctl_command'
; ;
hostnamectl)
_arguments -s \
{ -h,--help} '[Show this help]' \
'--version[Show package version]' \
'--transient[Only set transient hostname]' \
'--static[Only set static hostname]' \
'--pretty[Only set pretty hostname]' \
'--no-ask-password[Do not prompt for password]' \
{ -H,--host= } '[Operate on remote host]:userathost:_hosts_or_user_at_host' \
'*::hostnamectl commands:_hostnamectl_command'
; ;
journalctl)
_arguments -s \
'--since=[Start showing entries newer or of the specified date]:YYYY-MM-DD HH\:MM\:SS' \
'--until=[Stop showing entries older or of the specified date]:YYYY-MM-DD HH\:MM\:SS' \
{ -c,--cursor= } '[Start showing entries from specified cursor]:cursors:_journal_fields __CURSORS' \
{ -b,--this-boot} '[Show data only from current boot]' \
{ -u,--unit= } '[Show data only from the specified unit]:units:_journal_fields _SYSTEMD_UNIT' \
2013-03-01 17:39:04 +04:00
'--user-unit[Show data only from the specified user session unit]:units:_journal_fields _SYSTEMD_USER_UNIT' \
2012-11-05 10:09:13 +04:00
{ -p,--priority= } '[Show only messages within the specified priority range]:priority:_journal_fields PRIORITY' \
{ -f,--follow} '[Follow journal]' \
{ -n,--lines= } '[Number of journal entries to show]:integer' \
'--no-tail[Show all lines, even in follow mode]' \
{ -o,--output= } '[Change journal output mode]:output modes:_outputmodes' \
2012-11-24 04:14:21 +04:00
'--full[Show long fields in full]' \
2012-11-05 10:09:13 +04:00
{ -a,--all} '[Show all fields, including long and unprintable]' \
{ -q,--quiet} "[Don't show privilege warning]" \
'--no-pager[Do not pipe output into a pager]' \
{ -m,--merge} '[Show entries from all available journals]' \
{ -D,--directory= } '[Show journal files from directory]:directories:_directories' \
'--interval=[Time interval for changing the FSS sealing key]:time interval' \
'--verify-key=[Specify FSS verification key]:FSS key' \
{ -h,--help} '[Show this help]' \
'--version[Show package version]' \
'--new-id128[Generate a new 128 Bit ID]' \
'--header[Show journal header information]' \
'--disk-usage[Show total disk usage]' \
{ -F,--field= } '[List all values a certain field takes]:Fields:_list_fields' \
'--setup-keys[Generate new FSS key pair]' \
2012-11-17 02:41:58 +04:00
'--verify[Verify journal file consistency]' \
'--list-catalog[List messages in catalog]' \
'--update-catalog[Update binary catalog database]' \
2013-03-05 23:32:09 +04:00
'*::default: _journal_none'
2012-11-05 10:09:13 +04:00
; ;
localectl)
_arguments \
{ -h,--help} '[Show this help]' \
'--version[Show package version]' \
"--no-convert[Don't convert keyboard mappings]" \
'--no-pager[Do not pipe output into a pager]' \
'--no-ask-password[Do not prompt for password]' \
{ -H,--host= } '[Operate on remote host]:userathost:_hosts_or_user_at_host' \
'*::localectl commands:_localectl_command'
; ;
systemd-coredumpctl)
_arguments \
{ -o,--output= } '[Write output to FILE]:output file:_files' \
'--no-pager[Do not pipe output into a pager]' \
{ -h,--help} '[Show this help]' \
'--version[Show package version]' \
'*::systemd-coredumpctl commands:_systemd-coredumpctl_command'
; ;
timedatectl)
_arguments -s \
{ -h,--help} '[Show this help]' \
'--version[Show package version]' \
'--adjust-system-clock[Adjust system clock when changing local RTC mode]' \
'--no-pager[Do not pipe output into a pager]' \
'--no-ask-password[Do not prompt for password]' \
{ -H,--host= } '[Operate on remote host]:userathost:_hosts_or_user_at_host' \
'*::timedatectl commands:_timedatectl_command'
; ;
udevadm)
_arguments \
'--debug[Print debug messages to stderr]' \
'--version[Print version number]' \
'--help[Print help text]' \
'*::udevadm commands:_udevadm_command'
; ;
systemd-analyze)
_arguments \
{ -h,--help} '[Show help text.]' \
'--user[Shows performance data of user sessions instead of the system manager.]' \
2013-02-14 02:17:28 +04:00
'--order[When generating graph for dot, show only order]' \
'--require[When generating graph for dot, show only requirement]' \
2012-11-05 10:09:13 +04:00
'*::systemd-analyze commands:_systemd_analyze_command'
; ;
systemd-ask-password)
_arguments \
{ -h,--help} '[Show this help]' \
'--icon=[Icon name]' \
'--timeout=[Timeout in sec]' \
'--no-tty[Ask question via agent even on TTY]' \
'--accept-cached[Accept cached passwords]' \
'--multiple[List multiple passwords if available]'
; ;
systemd-cat)
_arguments \
{ -h,--help} '[Show this help]' \
'--version[Show package version.]' \
{ -t,--identifier= } '[Set syslog identifier.]' \
{ -p,--priority= } '[Set priority value.]:value:({0..7})' \
'--level-prefix=[Control whether level prefix shall be parsed.]:boolean:(1 0)' \
':Message'
; ;
systemd-cgls)
_arguments \
{ -h,--help} '[Show this help]' \
'--version[Show package version]' \
'--no-pager[Do not pipe output into a pager]' \
{ -a,--all} '[Show all groups, including empty]' \
'-k[Include kernel threads in output]' \
':cgroups:(cpuset cpu cpuacct memory devices freezer net_cls blkio)'
; ;
systemd-cgtop)
_arguments \
{ -h,--help} '[Show this help]' \
'--version[Print version and exit]' \
'(-c -m -i -t)-p[Order by path]' \
'(-c -p -m -i)-t[Order by number of tasks]' \
'(-m -p -i -t)-c[Order by CPU load]' \
'(-c -p -i -t)-m[Order by memory load]' \
'(-c -m -p -t)-i[Order by IO load]' \
{ -d,--delay= } '[Specify delay]' \
{ -n,--iterations= } '[Run for N iterations before exiting]' \
{ -b,--batch} '[Run in batch mode, accepting no input]' \
'--depth=[Maximum traversal depth]'
; ;
systemd-delta)
_arguments \
{ -h,--help} '[Show this help]' \
'--version[Show package version]' \
'--no-pager[Do not pipe output into a pager]' \
'--diff=[Show a diff when overridden files differ]:boolean:(1 0)' \
{ -t,--type= } '[Only display a selected set of override types]:types:(masked equivalent redirected overridden unchanged)' \
':SUFFIX:(tmpfiles.d sysctl.d systemd/system)'
; ;
systemd-detect-virt)
_arguments \
{ -h,--help} '[Show this help]' \
'--version[Show package version]' \
{ -c,--container} '[Only detect whether we are run in a container]' \
{ -v,--vm} '[Only detect whether we are run in a VM]' \
{ -q,--quiet} "[Don't output anything, just set return value]"
; ;
systemd-inhibit)
_arguments \
{ -h,--help} '[Show this help]' \
'--version[Show package version]' \
'--what=[Operations to inhibit]:options:(shutdown sleep idle handle-power-key handle-suspend-key handle-hibernate-key handle-lid-switch)' \
'--who=[A descriptive string who is inhibiting]' \
'--why=[A descriptive string why is being inhibited]' \
'--mode=[One of block or delay]' \
'--list[List active inhibitors]' \
'*:commands:_systemd_inhibit_command'
; ;
systemd-machine-id-setup)
_arguments \
{ -h,--help} '[Show this help]' \
'--version[Show package version]'
; ;
systemd-notify)
_arguments \
{ -h,--help} '[Show this help]' \
'--version[Show package version]' \
'--ready[Inform the init system about service start-up completion.]' \
'--pid=[Inform the init system about the main PID of the daemon]' \
'--status=[Send a free-form status string for the daemon to the init systemd]' \
'--booted[Returns 0 if the system was booted up with systemd]' \
'--readahead=[Controls disk read-ahead operations]:arguments:(cancel done noreply)'
; ;
systemd-nspawn)
_arguments \
{ -h,--help} '[Show this help]' \
{ --directory= ,-D} '[Directory to use as file system root for the namespace container. If omitted the current directory will be used.]:directories:_directories' \
{ --boot,-b} '[Automatically search for an init binary and invoke it instead of a shell or a user supplied program.]' \
{ --user= ,-u} '[Run the command under specified user, create home directory and cd into it.]' \
'--uuid=[Set the specified uuid for the container.]' \
{ --controllers= ,-C} '[Makes the container appear in other hierarchies than the name=systemd:/ one. Takes a comma-separated list of controllers.]' \
'--private-network[Turn off networking in the container. This makes all network interfaces unavailable in the container, with the exception of the loopback device.]' \
'--read-only[Mount the root file system read only for the container.]' \
'--capability=[List one or more additional capabilities to grant the container.]:capabilities:_systemd-nspawn' \
"--link-journal=[Control whether the container's journal shall be made visible to the host system.]:options:(no, host, guest, auto)" \
'-j[Equivalent to --link-journal=guest.]'
; ;
systemd-tmpfiles)
_arguments \
'--create[Create, set ownership/permissions based on the config files.]' \
'--clean[Clean up all files and directories with an age parameter configured.]' \
'--remove[All files and directories marked with r, R in the configuration files are removed.]' \
'--prefix=[Only apply rules that apply to paths with the specified prefix.]' \
'--help[Prints a short help text and exits.]' \
'*::files:_files'
; ;
systemd-tty-ask-password-agent)
_arguments \
{ -h,--help} '[Prints a short help text and exits.]' \
'--version[Prints a short version string and exits.]' \
'--list[Lists all currently pending system password requests.]' \
'--query[Process all currently pending system password requests by querying the user on the calling TTY.]' \
'--watch[Continuously process password requests.]' \
'--wall[Forward password requests to wall(1).]' \
'--plymouth[Ask question with plymouth(8).]' \
'--console[Ask question on /dev/console.]'
; ;
*) _message 'eh?' ; ;
esac
}
_systemd-nspawn( ) {
local -a _caps
_caps = ( CAP_CHOWN CAP_DAC_OVERRIDE CAP_DAC_READ_SEARCH
CAP_FOWNER CAP_FSETID CAP_IPC_OWNER CAP_KILL CAP_LEASE CAP_LINUX_IMMUTABLE
CAP_NET_BIND_SERVICE CAP_NET_BROADCAST CAP_NET_RAW CAP_SETGID CAP_SETFCAP CAP_SETPCAP
CAP_SETUID CAP_SYS_ADMIN CAP_SYS_CHROOT CAP_SYS_NICE CAP_SYS_PTRACE CAP_SYS_TTY_CONFIG
CAP_SYS_RESOURCE CAP_SYS_BOOT )
_values -s , 'capabilities' " $_caps [@] "
}
_systemd_inhibit_command( ) {
2013-03-23 01:51:52 +04:00
if ( ( CURRENT = = 1 ) ) ; then
2012-11-05 10:09:13 +04:00
compset -q
_normal
else
local n = ${ words [(b : 2 : i )[^-]*] }
if ( ( n <= CURRENT ) ) ; then
compset -n $n
_alternative \
'files:file:_files' \
'commands:command:_normal' && return 0
fi
_default
fi
}
_systemd_analyze_command( ) {
local -a _systemd_analyze_cmds
_systemd_analyze_cmds = (
'time:Print the time taken to start'
'blame:prints a list of all running units, ordered by the time they took to initialize'
'plot:prints an SVG graphic detailing which system services have been started at what time'
2013-02-14 02:17:28 +04:00
'dot:Dump dependency graph for dot(1)'
2012-11-05 10:09:13 +04:00
)
if ( ( CURRENT = = 1 ) ) ; then
_describe "options" _systemd_analyze_cmds
else
_message "no more options"
fi
}
_hosts_or_user_at_host( )
{
_alternative \
'users-hosts:: _user_at_host' \
'hosts:: _hosts'
}
_outputmodes( ) {
local -a _output_opts
_output_opts = ( short short-monotonic verbose export json json-pretty json-see cat)
_describe -t output 'output mode' _output_opts || compadd " $@ "
}
2013-03-23 01:51:52 +04:00
2012-11-05 10:09:13 +04:00
( ( $+functions[ _systemctl_command] ) ) || _systemctl_command( )
{
local -a _systemctl_cmds
_systemctl_cmds = (
"list-units:List units"
"start:Start (activate) one or more units"
"stop:Stop (deactivate) one or more units"
"reload:Reload one or more units"
"restart:Start or restart one or more units"
"condrestart:Restart one or more units if active"
"try-restart:Restart one or more units if active"
2012-12-03 18:45:53 +04:00
"reload-or-restart:Reload one or more units if possible, otherwise start or restart"
"force-reload:Reload one or more units if possible, otherwise restart if active"
2012-12-19 21:28:38 +04:00
"hibernate:Hibernate the system"
"hybrid-sleep:Hibernate and suspend the system"
2012-12-03 18:45:53 +04:00
"reload-or-try-restart:Reload one or more units if possible, otherwise restart if active"
2012-11-05 10:09:13 +04:00
"isolate:Start one unit and stop all others"
"kill:Send signal to processes of a unit"
"is-active:Check whether units are active"
2012-12-27 20:39:48 +04:00
"is-failed:Check whether units are failed"
2012-11-05 10:09:13 +04:00
"status:Show runtime status of one or more units"
"show:Show properties of one or more units/jobs or the manager"
"reset-failed:Reset failed state for all, one, or more units"
"load:Load one or more units"
"list-unit-files:List installed unit files"
"enable:Enable one or more unit files"
"disable:Disable one or more unit files"
"reenable:Reenable one or more unit files"
"preset:Enable/disable one or more unit files based on preset configuration"
"mask:Mask one or more units"
"unmask:Unmask one or more units"
"link:Link one or more units files into the search path"
"is-enabled:Check whether unit files are enabled"
"list-jobs:List jobs"
"cancel:Cancel all, one, or more jobs"
"dump:Dump server status"
"snapshot:Create a snapshot"
"delete:Remove one or more snapshots"
"show-environment:Dump environment"
"set-environment:Set one or more environment variables"
"unset-environment:Unset one or more environment variables"
"daemon-reload:Reload systemd manager configuration"
"daemon-reexec:Reexecute systemd manager"
"default:Enter system default mode"
"rescue:Enter system rescue mode"
"emergency:Enter system emergency mode"
"halt:Shut down and halt the system"
"suspend:Suspend the system"
"poweroff:Shut down and power-off the system"
"reboot:Shut down and reboot the system"
"kexec:Shut down and reboot the system with kexec"
"exit:Ask for user instance termination"
)
if ( ( CURRENT = = 1 ) ) ; then
_describe -t commands 'systemctl command' _systemctl_cmds || compadd " $@ "
else
local curcontext = " $curcontext "
cmd = " ${ ${ _systemctl_cmds [(r) $words [1] : *]%% : * } } "
# Deal with any aliases
case $cmd in
condrestart) cmd = "try-restart" ; ;
force-reload) cmd = "reload-or-try-restart" ; ;
esac
if ( ( $# cmd ) ) ; then
curcontext = " ${ curcontext % : * : * } :systemctl- ${ cmd } : "
local update_policy
zstyle -s " :completion: ${ curcontext } : " cache-policy update_policy
if [ [ -z " $update_policy " ] ] ; then
zstyle " :completion: ${ curcontext } : " cache-policy _systemctl_caching_policy
fi
_call_function ret _systemctl_$cmd || _message 'no more arguments'
else
_message " unknown systemctl command: $words [1] "
fi
return ret
fi
}
__systemctl( )
{
systemctl --full --no-legend --no-pager " $@ "
}
# Fills the unit list
_systemctl_all_units( )
{
if ( [ [ ${ +_sys_all_units } -eq 0 ] ] || _cache_invalid SYS_ALL_UNITS ) &&
! _retrieve_cache SYS_ALL_UNITS;
then
_sys_all_units = ( $( __systemctl list-units --all | { while read a b; do echo " $a " ; done ; } ) )
_store_cache SYS_ALL_UNITS _sys_all_units
fi
}
# Fills the unit list including all file units
_systemctl_really_all_units( )
{
local -a all_unit_files;
local -a really_all_units;
if ( [ [ ${ +_sys_really_all_units } -eq 0 ] ] || _cache_invalid SYS_REALLY_ALL_UNITS ) &&
! _retrieve_cache SYS_REALLY_ALL_UNITS;
then
all_unit_files = ( $( __systemctl list-unit-files | { while read a b; do echo " $a " ; done ; } ) )
_systemctl_all_units
really_all_units = ( $_sys_all_units $all_unit_files )
_sys_really_all_units = ( ${ (u)really_all_units } )
_store_cache SYS_REALLY_ALL_UNITS _sys_really_all_units
fi
}
_filter_units_by_property( ) {
local property = $1 value = $2 ; shift ; shift
local -a units ; units = ( $* )
local prop unit
for ( ( i = 1; $i <= ${# units [*] } ; i++) ) ; do
# FIXME: "Failed to issue method call: Unknown unit" errors are ignored for
# now (related to DBUS_ERROR_UNKNOWN_OBJECT). in the future, we need to
# revert to calling 'systemctl show' once for all units, which is way
# faster
unit = ${ units [i] }
prop = ${ (f) " $( _call_program units " $service show --no-pager --property= " $property " ${ unit } 2>/dev/null " ) " }
if [ [ " ${ prop } " = " $property = $value " ] ] ; then
echo " ${ unit } "
fi
done
}
_systemctl_active_units( ) { _sys_active_units = ( $( __systemctl list-units | { while read a b; do echo " $a " ; done ; } ) ) }
_systemctl_inactive_units( ) { _sys_inactive_units = ( $( __systemctl list-units --all | { while read a b c d; do [ [ $c = = "inactive" ] ] && echo " $a " ; done ; } ) ) }
_systemctl_failed_units( ) { _sys_failed_units = ( $( __systemctl list-units --failed | { while read a b; do echo " $a " ; done ; } ) ) }
_systemctl_enabled_units( ) { _sys_enabled_units = ( $( __systemctl list-unit-files | { while read a b; do [ [ $b = = "enabled" ] ] && echo " $a " ; done ; } ) ) }
_systemctl_disabled_units( ) { _sys_disabled_units = ( $( __systemctl list-unit-files | { while read a b; do [ [ $b = = "disabled" ] ] && echo " $a " ; done ; } ) ) }
_systemctl_masked_units( ) { _sys_masked_units = ( $( __systemctl list-unit-files | { while read a b; do [ [ $b = = "masked" ] ] && echo " $a " ; done ; } ) ) }
# Completion functions for ALL_UNITS
2012-12-27 20:39:48 +04:00
for fun in is-active is-failed is-enabled status show mask preset ; do
2012-11-05 10:09:13 +04:00
( ( $+functions[ _systemctl_$fun ] ) ) || _systemctl_$fun ( )
{
_systemctl_really_all_units
compadd " $@ " -a - _sys_really_all_units
}
done
# Completion functions for ENABLED_UNITS
for fun in disable reenable ; do
( ( $+functions[ _systemctl_$fun ] ) ) || _systemctl_$fun ( )
{
_systemctl_enabled_units
compadd " $@ " -a - _sys_enabled_units
}
done
# Completion functions for DISABLED_UNITS
( ( $+functions[ _systemctl_enable] ) ) || _systemctl_enable( )
{
_systemctl_disabled_units
compadd " $@ " -a - _sys_disabled_units
}
# Completion functions for FAILED_UNITS
( ( $+functions[ _systemctl_reset-failed] ) ) || _systemctl_reset-failed( )
{
_systemctl_failed_units
compadd " $@ " -a - _sys_failed_units || _message "no failed unit found"
}
# Completion functions for STARTABLE_UNITS
( ( $+functions[ _systemctl_start] ) ) || _systemctl_start( )
{
_systemctl_inactive_units
compadd " $@ " -a - _sys_inactive_units
}
# Completion functions for STOPPABLE_UNITS
for fun in stop kill try-restart condrestart ; do
( ( $+functions[ _systemctl_$fun ] ) ) || _systemctl_$fun ( )
{
_systemctl_active_units
compadd " $@ " - $( _filter_units_by_property CanStop yes \
${ _sys_active_units [*] } )
}
done
# Completion functions for ISOLATABLE_UNITS
( ( $+functions[ _systemctl_isolate] ) ) || _systemctl_isolate( )
{
_systemctl_all_units
compadd " $@ " - $( _filter_units_by_property AllowIsolate yes \
${ _sys_all_units [*] } )
}
# Completion functions for RELOADABLE_UNITS
for fun in reload reload-or-try-restart force-reload ; do
( ( $+functions[ _systemctl_$fun ] ) ) || _systemctl_$fun ( )
{
_systemctl_active_units
compadd " $@ " - $( _filter_units_by_property CanReload yes \
${ _sys_active_units [*] } )
}
done
# Completion functions for RESTARTABLE_UNITS
for fun in restart reload-or-restart ; do
( ( $+functions[ _systemctl_$fun ] ) ) || _systemctl_$fun ( )
{
_systemctl_all_units
compadd " $@ " - $( _filter_units_by_property CanStart yes \
${ _sys_all_units [*] } | while read line; do \
[ [ " $line " = ~ \. ( device| snapshot| socket| timer) $ ] ] || echo " $line " ; \
done )
}
done
# Completion functions for MASKED_UNITS
( ( $+functions[ _systemctl_unmask] ) ) || _systemctl_unmask( )
{
_systemctl_masked_units
compadd " $@ " -a - _sys_masked_units || _message "no masked unit found"
}
# Completion functions for JOBS
( ( $+functions[ _systemctl_cancel] ) ) || _systemctl_cancel( )
{
compadd " $@ " - $( __systemctl list-jobs \
| cut -d' ' -f1 2>/dev/null ) || _message "no job found"
}
# Completion functions for SNAPSHOTS
( ( $+functions[ _systemctl_delete] ) ) || _systemctl_delete( )
{
compadd " $@ " - $( __systemctl list-units --type snapshot --all \
| cut -d' ' -f1 2>/dev/null ) || _message "no snampshot found"
}
# Completion functions for ENVS
for fun in set-environment unset-environment ; do
( ( $+functions[ _systemctl_$fun ] ) ) || _systemctl_$fun ( )
{
local fun = $0 ; fun = ${ fun ##_systemctl_ }
local suf
if [ [ " ${ fun } " = "set-environment" ] ] ; then
suf = '-S='
fi
compadd " $@ " ${ suf } - $( systemctl show-environment \
| while read line; do echo " ${ line %% \= } " ; done )
}
done
( ( $+functions[ _systemctl_link] ) ) || _systemctl_link( ) { _files }
# no systemctl completion for:
2013-02-14 02:17:28 +04:00
# [STANDALONE]='daemon-reexec daemon-reload default dump
2012-11-05 10:09:13 +04:00
# emergency exit halt kexec list-jobs list-units
# list-unit-files poweroff reboot rescue show-environment'
# [NAME]='snapshot load'
_systemctl_caching_policy( )
{
local _sysunits
local -a oldcache
# rebuild if cache is more than a day old
oldcache = ( " $1 " ( mh+1) )
( ( $# oldcache ) ) && return 0
_sysunits = ( $( __systemctl --all | cut -d' ' -f1) )
if ( ( $# _sysunits ) ) ; then
for unit in $_sysunits ; do
[ [ " $unit " -nt " $1 " ] ] && return 0
done
fi
return 1
}
_list_fields( ) {
local -a journal_fields
journal_fields = ( MESSAGE{ ,_ID} PRIORITY CODE_{ FILE,LINE,FUNC}
ERRNO SYSLOG_{ FACILITY,IDENTIFIER,PID}
_{ P,U,G} ID _COMM _EXE _CMDLINE
_AUDIT_{ SESSION,LOGINUID}
_SYSTEMD_{ CGROUP,SESSION,UNIT,OWNER_UID}
2013-03-05 23:32:09 +04:00
_SYSTEMD_USER_UNIT
2012-11-05 10:09:13 +04:00
_SELINUX_CONTEXT _SOURCE_REALTIME_TIMESTAMP
_{ BOOT,MACHINE} _ID _HOSTNAME _TRANSPORT
_KERNEL_{ DEVICE,SUBSYSTEM}
_UDEV_{ SYSNAME,DEVNODE,DEVLINK}
__CURSOR __{ REALTIME,MONOTONIC} _TIMESTAMP)
_describe 'possible fields' journal_fields
}
2013-03-05 23:32:09 +04:00
_journal_none( ) {
local -a _commands _files
_commands = ( ${ (f) " $( _call_program commands " $service " -F _EXE 2>/dev/null) " } )
_alternative : \
'files:/dev files:_files -W /dev -P /dev/' \
" commands:commands:( $_commands [@]) " \
'fields:fields:_list_fields'
}
2012-11-05 10:09:13 +04:00
_journal_fields( ) {
local -a _fields cmd
cmd = ( "journalctl" " -F ${ @[-1] } " "2>/dev/null" )
2013-03-23 01:51:52 +04:00
_fields = ( ${ (f) " $( _call_program fields $cmd [ @] ) " } )
2012-11-05 10:09:13 +04:00
typeset -U _fields
_describe 'possible values' _fields
}
_loginctl_all_sessions( ) { _sys_all_sessions = ( $( loginctl list-sessions | { while read a b; do echo " $a " ; done ; } ) ) }
_loginctl_all_users( ) { _sys_all_users = ( $( loginctl list-users | { while read a b; do echo " $a " ; done ; } ) ) }
_loginctl_all_seats( ) { _sys_all_seats = ( $( loginctl list-seats | { while read a b; do echo " $a " ; done ; } ) ) }
# Completion functions for SESSIONS
for fun in session-status show-session activate lock-session unlock-session terminate-session kill-session ; do
( ( $+functions[ _loginctl_$fun ] ) ) || _loginctl_$fun ( )
{
_loginctl_all_sessions
compadd " $@ " -a - _sys_all_sessions
}
done
# Completion functions for USERS
for fun in user-status show-user enable-linger disable-linger terminate-user kill-user ; do
( ( $+functions[ _loginctl_$fun ] ) ) || _loginctl_$fun ( )
{
_loginctl_all_users
compadd " $@ " -a - _sys_all_users
}
done
# Completion functions for SEATS
( ( $+functions[ _loginctl_seats] ) ) || _loginctl_seats( )
{
_loginctl_all_seats
compadd " $@ " -a - _sys_all_seats
}
for fun in seat-status show-seat terminate-seat ; do
( ( $+functions[ _loginctl_$fun ] ) ) || _loginctl_$fun ( )
{ _loginctl_seats }
done
# Completion functions for ATTACH
( ( $+functions[ _loginctl_attach] ) ) || _loginctl_attach( )
{
_loginctl_all_seats
_arguments -w -C -S -s \
':seat:_loginctl_seats' \
'*:device:_files'
}
# no loginctl completion for:
# [STANDALONE]='list-sessions list-users list-seats flush-devices'
( ( $+functions[ _loginctl_command] ) ) || _loginctl_command( )
{
local -a _loginctl_cmds
_loginctl_cmds = (
"list-sessions:List sessions"
"session-status:Show session status"
"show-session:Show properties of one or more sessions"
"activate:Activate a session"
"lock-session:Screen lock one or more sessions"
"unlock-session:Screen unlock one or more sessions"
"terminate-session:Terminate one or more sessions"
"kill-session:Send signal to processes of a session"
"list-users:List users"
"user-status:Show user status"
"show-user:Show properties of one or more users"
"enable-linger:Enable linger state of one or more users"
"disable-linger:Disable linger state of one or more users"
"terminate-user:Terminate all sessions of one or more users"
"kill-user:Send signal to processes of a user"
"list-seats:List seats"
"seat-status:Show seat status"
"show-seat:Show properties of one or more seats"
"attach:Attach one or more devices to a seat"
"flush-devices:Flush all device associations"
"terminate-seat:Terminate all sessions on one or more seats"
)
if ( ( CURRENT = = 1 ) ) ; then
_describe -t commands 'loginctl command' _loginctl_cmds || compadd " $@ "
else
local curcontext = " $curcontext "
cmd = " ${ ${ _loginctl_cmds [(r) $words [1] : *]%% : * } } "
if ( ( $# cmd ) ) ; then
curcontext = " ${ curcontext % : * : * } :loginctl- ${ cmd } : "
_call_function ret _loginctl_$cmd || _message 'no more arguments'
else
_message " unknown loginctl command: $words [1] "
fi
return ret
fi
}
_hostnamectl_command( ) {
local -a _hostnamectl_cmds
_hostnamectl_cmds = (
"status:Show current hostname settings"
"set-hostname:Set system hostname"
"set-icon-name:Set icon name for host"
)
if ( ( CURRENT = = 1 ) ) ; then
_describe -t commands 'hostnamectl commands' _hostnamectl_cmds || compadd " $@ "
else
local curcontext = " $curcontext "
cmd = " ${ ${ _hostnamectl_cmds [(r) $words [1] : *]%% : * } } "
if ( ( $# cmd ) ) ; then
[ [ $cmd = = status ] ] && msg = "no options" || msg = " options for $cmd "
_message " $msg "
else
_message " unknown hostnamectl command: $words [1] "
fi
fi
}
_localectl_set-locale( ) {
local -a _confs _locales
local expl suf
_locales = ( ${ (f) " $( _call_program locales " $service " list-locales) " } )
_confs = ( ${ ${ (f) " $( _call_program confs "locale 2>/dev/null" ) " } % \= * } )
if [ [ -prefix 1 *\= ] ] ; then
local conf = ${ PREFIX %% \= * }
compset -P1 '*='
_wanted locales expl "locales configs" \
_combination localeconfs confs = $conf locales " $@ " -
else
compadd -S '=' $_confs
fi
}
_localectl_set-keymap( ) {
local -a _keymaps
_keymaps = ( ${ (f) " $( _call_program locales " $service " list-keymaps) " } )
if ( ( CURRENT <= 3 ) ) ; then
_describe keymaps _keymaps
else
_message "no more options"
fi
}
_localectl_set-x11-keymap( ) {
if ( ( $+commands[ pkg-config] ) ) ; then
local -a _file _layout _model _variant _options
local _xorg_lst
_xorg_lst = ${ " $( $commands [ pkg-config] xkeyboard-config --variable= xkb_base) " }
_file = ( ${ (ps : \n \! : ) " $( <$_xorg_lst /rules/xorg.lst) " } )
_layout = ( ${ ${ ${ (M) ${ (f)_file[1] } : # * } # } %% * } )
_model = ( ${ ${ ${ (M) ${ (f)_file[2] } : # * } # } %% * } )
_variant = ( ${ ${ ${ (M) ${ (f)_file[3] } : # * } # } %% * } )
_options = ( ${ ${ ${ (M) ${ (f)_file[4] } : # * } # } %% * } )
#_layout=( ${(f)"$( echo $_file[1] | awk '/^ / {print $1}' )"} )
#_model=( ${(f)"$(echo $_file[2] | awk '/^ / {print $1}')"} )
#_variant=( ${(f)"$(echo $_file[3] | awk '/^ / {print $1}')"} )
#_options=( ${(f)"$(echo ${_file[4]//:/\\:} | awk '/^ / {print $1}')"} )
2013-03-23 01:51:52 +04:00
case $CURRENT in
2012-11-05 10:09:13 +04:00
2) _describe layouts _layout ; ;
3) _describe models _model; ;
4) _describe variants _variant; ;
5) _describe options _options; ;
*) _message "no more options"
esac
fi
}
_localectl_command( ) {
local -a _localectl_cmds
_localectl_cmds = (
'status:Show current locale settings'
'set-locale:Set system locale'
'list-locales:Show known locales'
'set-keymap:Set virtual console keyboard mapping'
'list-keymaps:Show known virtual console keyboard mappings'
'set-x11-keymap:Set X11 keyboard mapping'
)
if ( ( CURRENT = = 1 ) ) ; then
_describe -t commands 'localectl command' _localectl_cmds
else
local curcontext = " $curcontext "
cmd = " ${ ${ _localectl_cmds [(r) $words [1] : *]%% : * } } "
if ( ( $+functions[ _localectl_$cmd ] ) ) ; then
_localectl_$cmd
else
_message "no more options"
fi
fi
}
_timedatectl_set-timezone( ) {
local -a _timezones
_timezones = ( ${ (f) " $( _call_program timezones " ${ service } " list-timezones) " } )
compadd " $_timezones [@] "
}
_timedatectl_set-time( ) {
_message "YYYY-MM-DD HH:MM:SS"
}
_timedatectl_set-local-rtc( ) {
local -a _options
_options = (
'0:Maintain RTC in universal time'
'1:Maintain RTC in local time'
)
_describe options _options
}
_timedatectl_set-ntp( ) {
local -a _options
_options = (
'0:Disable NTP based network time configuration'
'1:Enable NTP based network time configuration'
)
_describe options _options
}
_timedatectl_command( ) {
local -a _timedatectl_cmds
_timedatectl_cmds = (
'status:Show current time settings'
'set-time:Set system time'
'set-timezone:Set system timezone'
'list-timezones:Show known timezones'
'set-local-rtc:Control whether RTC is in local time'
'set-ntp:Control whether NTP is enabled'
)
if ( ( CURRENT = = 1 ) ) ; then
_describe -t commands 'timedatectl command' _timedatectl_cmds
else
local curcontext = " $curcontext "
cmd = " ${ ${ _timedatectl_cmds [(r) $words [1] : *]%% : * } } "
if ( ( $# cmd ) ) ; then
if ( ( $+functions[ _timedatectl_$cmd ] ) ) ; then
_timedatectl_$cmd
else
_message "no more options"
fi
else
_message " unknown timedatectl command: $words [1] "
fi
fi
}
_systemd-coredumpctl_command( ) {
local -a _systemd_coredumpctl_cmds
_systemd_coredumpctl_cmds = (
'list:List available coredumps'
'dump:Print coredump to std'
)
if ( ( CURRENT = = 1 ) ) ; then
_describe -t commands 'systemd-coredumpctl command' _systemd_coredumpctl_cmds
else
local curcontext = " $curcontext "
local -a dumps
cmd = " ${ ${ _systemd_coredumpctl_cmds [(r) $words [1] : *]%% : * } } "
if ( ( $# cmd ) ) ; then
dumps = ( " ${ (f) $( _call_program dumps "systemd-coredumpctl list 2>/dev/null" ) } " )
if [ [ -n " $dumps " ] ] ; then
compadd " ${ dumps [@] } "
else
_message "no coredumps"
fi
else
_message "no more options"
fi
fi
}
_udevadm_info( ) {
_arguments \
'--query=[Query the database for specified type of device data. It needs the --path or --name to identify the specified device.]:type:(name symlink path property all)' \
'--path=[The devpath of the device to query.]:sys files:_files -P /sys/ -W /sys' \
'--name=[The name of the device node or a symlink to query]:device files:_files -P /dev/ -W /dev' \
'--root[Print absolute paths in name or symlink query.]' \
'--attribute-walk[Print all sysfs properties of the specified device that can be used in udev rules to match the specified device]' \
'--export[Print output as key/value pairs.]' \
'--export-prefix=[Add a prefix to the key name of exported values.]:prefix' \
'--device-id-of-file=[Print major/minor numbers of the underlying device, where the file lives on.]:files:_udevadm_mounts' \
'--export-db[Export the content of the udev database.]' \
'--cleanup-db[Cleanup the udev database.]'
}
_udevadm_trigger( ) {
_arguments \
'--verbose[Print the list of devices which will be triggered.]' \
'--dry-run[Do not actually trigger the event.]' \
'--type=[Trigger a specific type of devices.]:types:(devices subsystems failed)' \
'--action=[Type of event to be triggered.]:actions:(add change remove)' \
'--subsystem-match=[Trigger events for devices which belong to a matching subsystem.]' \
'--subsystem-nomatch=[Do not trigger events for devices which belong to a matching subsystem.]' \
'--attr-match=attribute=[Trigger events for devices with a matching sysfs attribute.]' \
'--attr-nomatch=attribute=[Do not trigger events for devices with a matching sysfs attribute.]' \
'--property-match=[Trigger events for devices with a matching property value.]' \
'--tag-match=property[Trigger events for devices with a matching tag.]' \
'--sysname-match=[Trigger events for devices with a matching sys device name.]' \
'--parent-match=[Trigger events for all children of a given device.]'
}
_udevadm_settle( ) {
_arguments \
'--timeout=[Maximum number of seconds to wait for the event queue to become empty.]' \
'--seq-start=[Wait only for events after the given sequence number.]' \
'--seq-end=[Wait only for events before the given sequence number.]' \
'--exit-if-exists=[Stop waiting if file exists.]:files:_files' \
'--quiet[Do not print any output, like the remaining queue entries when reaching the timeout.]' \
'--help[Print help text.]'
}
_udevadm_control( ) {
_arguments \
'--exit[Signal and wait for systemd-udevd to exit.]' \
'--log-priority=[Set the internal log level of systemd-udevd.]:priorities:(err info debug)' \
'--stop-exec-queue[Signal systemd-udevd to stop executing new events. Incoming events will be queued.]' \
'--start-exec-queue[Signal systemd-udevd to enable the execution of events.]' \
'--reload[Signal systemd-udevd to reload the rules files and other databases like the kernel module index.]' \
'--property=[Set a global property for all events.]' \
'--children-max=[Set the maximum number of events.]' \
'--timeout=[The maximum number of seconds to wait for a reply from systemd-udevd.]' \
'--help[Print help text.]'
}
2013-03-23 01:51:52 +04:00
2012-11-05 10:09:13 +04:00
_udevadm_monitor( ) {
_arguments \
'--kernel[Print the kernel uevents.]' \
'--udev[Print the udev event after the rule processing.]' \
'--property[Also print the properties of the event.]' \
'--subsystem-match=[Filter events by subsystem[/devtype].]' \
'--tag-match=[Filter events by property.]' \
'--help[Print help text.]'
}
_udevadm_test( ) {
_arguments \
'--action=[The action string.]:actions:(add change remove)' \
'--subsystem=[The subsystem string.]' \
'--help[Print help text.]' \
'*::devpath:_files -P /sys/ -W /sys'
}
_udevadm_test-builtin( ) {
if ( ( CURRENT = = 2 ) ) ; then
_arguments \
'--help[Print help text]' \
2013-03-20 16:09:58 +04:00
'*::builtins:(blkid btrfs hwdb input_id kmod path_id usb_id uaccess)'
2012-11-05 10:09:13 +04:00
elif ( ( CURRENT = = 3 ) ) ; then
_arguments \
'--help[Print help text]' \
'*::syspath:_files -P /sys -W /sys'
else
_arguments \
'--help[Print help text]'
fi
}
_udevadm_mounts( ) {
local dev_tmp dpath_tmp mp_tmp mline
tmp = ( " ${ (@f) $( < /etc/mtab) } " )
dev_tmp = ( " ${ (@) ${ (@)tmp%% * } : #none } " )
mp_tmp = ( " ${ (@) ${ (@)tmp#* } %% * } " )
local MATCH
mp_tmp = ( " ${ (@q)mp_tmp//(#m) \\ [0-7](#c3)/ ${ (#) $(( 8# ${ MATCH [2,-1] } )) } } " )
dpath_tmp = ( " ${ (@Mq)dev_tmp : #/* } " )
dev_tmp = ( " ${ (@q)dev_tmp : #/* } " )
_alternative \
'device-paths: device path:compadd -a dpath_tmp' \
'directories:mount point:compadd -a mp_tmp'
}
_udevadm_command( ) {
local -a _udevadm_cmds
_udevadm_cmds = (
'info:query sysfs or the udev database'
'trigger:request events from the kernel'
'settle:wait for the event queue to finish'
'control:control the udev daemon'
'monitor:listen to kernel and udev events'
'test:test an event run'
'test-builtin:test a built-in command'
)
if ( ( CURRENT = = 1) ) ; then
_describe -t commands 'udevadm commands' _udevadm_cmds
else
local curcontext = " $curcontext "
cmd = " ${ ${ _udevadm_cmds [(r) $words [1] : *]%% : * } } "
if ( ( $# cmd) ) ; then
if ( ( $+functions[ _udevadm_$cmd ] ) ) ; then
_udevadm_$cmd
else
_message " no options for $cmd "
fi
else
_message "no more options"
fi
fi
}
_ctls " $@ "
#vim: set ft=zsh sw=4 ts=4 et
