shaba/systemd
1
0
Fork 0
mirror of https://github.com/systemd/systemd.git synced 2024-11-14 15:21:37 +03:00
Code
a7d0ef446e
systemd/units/systemd-networkd.service.m4.in

38 lines
1.3 KiB
Plaintext
Raw Normal View History

networkd: add a basic network daemon This daemon listens for and configures network devices tagged with 'systemd-networkd'. By default, no devices are tagged so this daemon can safely run in parallel with existing network daemons/scripts. Networks are configured in /etc/systemd/network/*.network. The first .network file that matches a given link is applied. The matching logic is similar to the one for .link files, but additionally supports matching on interface name. The mid-term aim is to provide an alternative to ad-hoc scripts currently used in initrd's and for wired setups that don't change much (e.g., as seen on servers/and some embedded systems). Currently, static addresses and a gateway can be configured. Example .network file: [Match] Name=wlp2s0 [Network] Description=My Network Gateway=192.168.1.1 Address=192.168.1.23/24 Address=fe80::9aee:94ff:fe3f:c618/64
2013-10-17 05:18:36 +04:00
# This file is part of systemd.
#
# systemd is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2.1 of the License, or
# (at your option) any later version.
[Unit]
Description=Network Service
Documentation=man:systemd-networkd.service(8)
units: minor cleanups
2014-06-17 04:18:33 +04:00
ConditionCapability=CAP_NET_ADMIN
networkd: add a basic network daemon This daemon listens for and configures network devices tagged with 'systemd-networkd'. By default, no devices are tagged so this daemon can safely run in parallel with existing network daemons/scripts. Networks are configured in /etc/systemd/network/*.network. The first .network file that matches a given link is applied. The matching logic is similar to the one for .link files, but additionally supports matching on interface name. The mid-term aim is to provide an alternative to ad-hoc scripts currently used in initrd's and for wired setups that don't change much (e.g., as seen on servers/and some embedded systems). Currently, static addresses and a gateway can be configured. Example .network file: [Match] Name=wlp2s0 [Network] Description=My Network Gateway=192.168.1.1 Address=192.168.1.23/24 Address=fe80::9aee:94ff:fe3f:c618/64
2013-10-17 05:18:36 +04:00
DefaultDependencies=no
units: networkd - order after udev This way we are sure that /dev/net/tun has been given the right permissions before we try to connect to it. Ideally, we should create tun/tap devices over netlink, and then this whole issue would go away.
2014-09-07 00:37:31 +04:00
# dbus.service can be dropped once on kdbus, and systemd-udevd.service can be
# dropped once tuntap is moved to netlink
After=systemd-udevd.service dbus.service network-pre.target systemd-sysusers.service
units: minor cleanups
2014-06-17 04:18:33 +04:00
Before=network.target multi-user.target shutdown.target
Conflicts=shutdown.target
networkd: add a basic network daemon This daemon listens for and configures network devices tagged with 'systemd-networkd'. By default, no devices are tagged so this daemon can safely run in parallel with existing network daemons/scripts. Networks are configured in /etc/systemd/network/*.network. The first .network file that matches a given link is applied. The matching logic is similar to the one for .link files, but additionally supports matching on interface name. The mid-term aim is to provide an alternative to ad-hoc scripts currently used in initrd's and for wired setups that don't change much (e.g., as seen on servers/and some embedded systems). Currently, static addresses and a gateway can be configured. Example .network file: [Match] Name=wlp2s0 [Network] Description=My Network Gateway=192.168.1.1 Address=192.168.1.23/24 Address=fe80::9aee:94ff:fe3f:c618/64
2013-10-17 05:18:36 +04:00
Wants=network.target
units: make networkd pull in its own .busname unit The daemon requires the busname unit to operate (on kdbus systems), since it contains the policy that allows it to acquire its service name. This fixes https://bugs.freedesktop.org/show_bug.cgi?id=90287
2015-05-15 23:59:24 +03:00
# On kdbus systems we pull in the busname explicitly, because it
# carries policy that allows the daemon to acquire its name.
Wants=org.freedesktop.network1.busname
After=org.freedesktop.network1.busname
networkd: add a basic network daemon This daemon listens for and configures network devices tagged with 'systemd-networkd'. By default, no devices are tagged so this daemon can safely run in parallel with existing network daemons/scripts. Networks are configured in /etc/systemd/network/*.network. The first .network file that matches a given link is applied. The matching logic is similar to the one for .link files, but additionally supports matching on interface name. The mid-term aim is to provide an alternative to ad-hoc scripts currently used in initrd's and for wired setups that don't change much (e.g., as seen on servers/and some embedded systems). Currently, static addresses and a gateway can be configured. Example .network file: [Match] Name=wlp2s0 [Network] Description=My Network Gateway=192.168.1.1 Address=192.168.1.23/24 Address=fe80::9aee:94ff:fe3f:c618/64
2013-10-17 05:18:36 +04:00
[Service]
networkd: use Type=notify Also start earlier during boot.
2013-11-23 05:07:08 +04:00
Type=notify
networkd: exit on idle We will be woken up on rtnl or dbus activity, so let's just quit if some time has passed and that is the only thing that can happen. Note that we will always stay around if we expect network activity (e.g. DHCP is enabled), as we are not restarted on that.
2015-02-04 17:00:20 +03:00
Restart=on-failure
networkd: add a basic network daemon This daemon listens for and configures network devices tagged with 'systemd-networkd'. By default, no devices are tagged so this daemon can safely run in parallel with existing network daemons/scripts. Networks are configured in /etc/systemd/network/*.network. The first .network file that matches a given link is applied. The matching logic is similar to the one for .link files, but additionally supports matching on interface name. The mid-term aim is to provide an alternative to ad-hoc scripts currently used in initrd's and for wired setups that don't change much (e.g., as seen on servers/and some embedded systems). Currently, static addresses and a gateway can be configured. Example .network file: [Match] Name=wlp2s0 [Network] Description=My Network Gateway=192.168.1.1 Address=192.168.1.23/24 Address=fe80::9aee:94ff:fe3f:c618/64
2013-10-17 05:18:36 +04:00
RestartSec=0
ExecStart=@rootlibexecdir@/systemd-networkd
networkd: drop CAP_SYS_MODULE Rely on modules being built-in or autoloaded on-demand. As networkd is a network facing service, we want to limits its capabilities, as much as possible. Also, we may not have CAP_SYS_MODULE in a container, and we want networkd to work the same there. Module autoloading does not always work, but should be fixed by the kernel patch f98f89a0104454f35a: 'net: tunnels - enable module autoloading', which is currently in net-next and which people may consider backporting if they want tunneling support without compiling in the modules. Early adopters may also use a module-load.d snippet and order systemd-modules-load.service before networkd to force the module loading of tunneling modules. This sholud fix the various build issues people have reported.
2014-06-02 23:50:50 +04:00
CapabilityBoundingSet=CAP_NET_ADMIN CAP_NET_BIND_SERVICE CAP_NET_BROADCAST CAP_NET_RAW CAP_SETUID CAP_SETGID CAP_SETPCAP CAP_CHOWN CAP_DAC_OVERRIDE CAP_FOWNER
core: rename ReadOnlySystem= to ProtectSystem= and add a third value for also mounting /etc read-only Also, rename ProtectedHome= to ProtectHome=, to simplify things a bit. With this in place we now have two neat options ProtectSystem= and ProtectHome= for protecting the OS itself (and optionally its configuration), and for protecting the user's data.
2014-06-04 20:07:55 +04:00
ProtectSystem=full
ProtectHome=yes
event: hook up sd-event with the service watchdog logic Adds a new call sd_event_set_watchdog() that can be used to hook up the event loop with the watchdog supervision logic of systemd. If enabled and $WATCHDOG_USEC is set the event loop will ping the invoking systemd daemon right after coming back from epoll_wait() but not more often than $WATCHDOG_USEC/4. The epoll_wait() will sleep no longer than $WATCHDOG_USEC/4*3, to make sure the service manager is called in time. This means that setting WatchdogSec= in a .service file and calling sd_event_set_watchdog() in your daemon is enough to hook it up with the watchdog logic.
2013-12-11 21:14:52 +04:00
WatchdogSec=1min
install: do not statically enable systemd-networkd [tomegun: pruned the commit message as not to contradict the follow-up commit]
2014-02-21 07:38:17 +04:00
[Install]
WantedBy=multi-user.target
networkd: support socket activation Still keep the non-socket activation code around for starting from the commandline, but will likely drop that too in the future.
2015-02-02 00:13:26 +03:00
Also=systemd-networkd.socket
Copy Permalink