2003-07-21 07:48:48 +04:00
/*
* udev - add . c
*
* Userspace devfs
*
* Copyright ( C ) 2003 Greg Kroah - Hartman < greg @ kroah . com >
*
*
* This program is free software ; you can redistribute it and / or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation version 2 of the License .
*
* This program is distributed in the hope that it will be useful , but
* WITHOUT ANY WARRANTY ; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE . See the GNU
* General Public License for more details .
*
* You should have received a copy of the GNU General Public License along
* with this program ; if not , write to the Free Software Foundation , Inc . ,
* 675 Mass Ave , Cambridge , MA 0213 9 , USA .
*
*/
# include <stdlib.h>
# include <string.h>
# include <stdio.h>
# include <fcntl.h>
# include <unistd.h>
# include <errno.h>
2003-10-23 06:39:54 +04:00
# include <sys/stat.h>
2003-11-24 07:56:18 +03:00
# include <sys/types.h>
# include <grp.h>
[PATCH] hmm, handle net devices with udev?
Hmm, Arndt Bergmann sent a patch like this one a few weeks ago and
I want to bring the question back, if we want to handle net device
naming with udev.
With this patch it is actually possible to specify something like this
in udev.rules:
KERNEL="dummy*", SYSFS{address}="00:00:00:00:00:00", SYSFS{features}="0x0", NAME="blind%n"
KERNEL="eth*", SYSFS{address}="00:0d:60:77:30:91", NAME="private"
and you will get:
[root@pim udev.kay]# cat /proc/net/dev
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 1500 30 0 0 0 0 0 0 1500 30 0 0 0 0 0 0
private: 278393 1114 0 0 0 0 0 0 153204 1468 0 0 0 0 0 0
sit0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
blind0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
The udevinfo program is also working:
[root@pim udev.kay]# ./udevinfo -a -p /sys/class/net/private
looking at class device '/sys/class/net/private':
SYSFS{addr_len}="6"
SYSFS{address}="00:0d:60:77:30:91"
SYSFS{broadcast}="ff:ff:ff:ff:ff:ff"
SYSFS{features}="0x3a9"
SYSFS{flags}="0x1003"
SYSFS{ifindex}="2"
SYSFS{iflink}="2"
SYSFS{mtu}="1500"
SYSFS{tx_queue_len}="1000"
SYSFS{type}="1"
follow the class device's "device"
looking at the device chain at '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:01.0':
BUS="pci"
ID="0000:02:01.0"
SYSFS{class}="0x020000"
SYSFS{detach_state}="0"
SYSFS{device}="0x101e"
SYSFS{irq}="11"
SYSFS{subsystem_device}="0x0549"
SYSFS{subsystem_vendor}="0x1014"
SYSFS{vendor}="0x8086"
The matching device will be renamed to the given name. The device name
will not be put into the udev database, cause the kernel renames the
device and the sysfs name disappears.
I like it, cause it plugs in nicely. We have all the naming features
and sysfs queries and walks inside of udev. The sysfs timing races
are already solved and the management tools are working for net devices
too. nameif can only match the MAC address now. udev can match any sysfs
value of the device tree the net device is connected to.
But right, net devices do not have device nodes :)
2004-03-25 10:19:39 +03:00
# include <net/if.h>
# include <sys/socket.h>
# include <sys/ioctl.h>
# include <linux/sockios.h>
2003-11-24 07:56:18 +03:00
# ifndef __KLIBC__
# include <pwd.h>
2004-03-02 09:42:30 +03:00
# include <utmp.h>
2003-11-24 07:56:18 +03:00
# endif
2003-07-21 07:48:48 +04:00
2004-02-24 06:07:25 +03:00
# include "libsysfs/sysfs/libsysfs.h"
2003-07-21 07:48:48 +04:00
# include "udev.h"
2004-03-23 09:22:20 +03:00
# include "udev_lib.h"
2003-07-21 07:48:48 +04:00
# include "udev_version.h"
[PATCH] add udev logging to info log
On Thu, Jan 15, 2004 at 05:14:16AM +0100, Kay Sievers wrote:
> On Wed, Jan 14, 2004 at 01:10:43PM -0800, Greg KH wrote:
> > On Wed, Jan 14, 2004 at 02:34:26PM -0600, Clay Haapala wrote:
> > > On Wed, 14 Jan 2004, Chris Friesen spake thusly:
> > > >
> > > > Maybe for ones with a matching rule, you could print something like:
> > > >
> > > >
> > > Is the act of printing/syslogging a rule in an of itself?
> >
> > No, as currently the only way stuff ends up in the syslog is if
> > DEBUG=true is used on the build line.
> >
> > But it's sounding like we might want to change that... :)
>
> How about this in the syslog after connect/disconnect?
>
> Jan 15 05:07:45 pim udev[28007]: configured rule in '/etc/udev/udev.rules' at line 17 applied, 'video*' becomes 'video/webcam%n'
> Jan 15 05:07:45 pim udev[28007]: creating device node '/udev/video/webcam0'
> Jan 15 05:07:47 pim udev[28015]: removing device node '/udev/video/webcam0'
Here is a slightly better version. I've created a logging.h file and
moved the debug macros from udev.h in there.
If you type:
'make' - you will get a binary that prints one or two lines to syslog
if a device node is created or deleted
'make LOG=false' - you get a binary that prints asolutely nothing
'make DEBUG=true' - the same as today, it will print all debug lines
2004-01-16 08:53:20 +03:00
# include "logging.h"
2003-07-21 07:48:48 +04:00
# include "namedev.h"
2003-08-06 10:57:23 +04:00
# include "udevdb.h"
2003-11-24 07:56:18 +03:00
# include "klibc_fixups.h"
2003-07-21 07:48:48 +04:00
2004-03-02 09:42:30 +03:00
# define LOCAL_USER "$local"
2003-07-21 07:48:48 +04:00
/*
* Right now the major / minor of a device is stored in a file called
* " dev " in sysfs .
* The number is stored as :
2003-10-21 07:31:24 +04:00
* MM : mm
2003-07-21 07:48:48 +04:00
* MM is the major
* mm is the minor
2003-10-21 07:31:24 +04:00
* The value is in decimal .
2003-07-21 07:48:48 +04:00
*/
2003-11-14 07:08:10 +03:00
static int get_major_minor ( struct sysfs_class_device * class_dev , struct udevice * udev )
2003-07-21 07:48:48 +04:00
{
2003-12-16 08:53:28 +03:00
struct sysfs_attribute * attr = NULL ;
2003-07-21 07:48:48 +04:00
2003-12-16 08:53:28 +03:00
attr = sysfs_get_classdev_attr ( class_dev , " dev " ) ;
if ( attr = = NULL )
[PATCH] netdev - udevdb+dev.d changes
Here is a patch to change the netdev handling in the database and for
the dev.d/ calls. I applies on top of the udevd.patch, cause klibc has
no sysinfo().
o netdev's are also put into our database now. I want this for the
udevruler gui to get a list of all handled devices.
All devices in the db are stamped with the system uptime value at
the creation time. 'udevinfo -d' prints it.
o the DEVPATH value is the key for udevdb, but if we rename
a netdev, the name is replaced in the kernel, so we add
the changed name to the db to match with the remove event.
NOTE: The dev.d/ scripts still get the original name from the
hotplug call. Should we replace DEVPATH with the new name too?
o We now only add a device to the db, if we have successfully created
the main node or successfully renamed a netdev. This is the main part
of the patch, cause I needed to clean the retval passing trough all
the functions used for node creation.
o DEVNODE sounds a bit ugly for netdev's so I exported DEVNAME too.
Can we change the name?
o I've added a UDEV_NO_DEVD to possibly skip the script execution
and used it in udev-test.pl.
udevstart is the same horror now, if you have scripts with logging
statements in dev.d/ it takes minutes to finish, can we skip the
scripts here too?
o The get_device_type() function is changed to be more strict, cause
'udevinfo -a -p /block/' gets a class device for it and tries to
print the major/minor values.
o bugfix, the RESULT value has now a working newline removal and a test
for this case.
2004-04-01 11:12:57 +04:00
goto error ;
2003-12-16 08:53:28 +03:00
dbg ( " dev='%s' " , attr - > value ) ;
2003-07-21 07:48:48 +04:00
2003-12-16 08:53:28 +03:00
if ( sscanf ( attr - > value , " %u:%u " , & udev - > major , & udev - > minor ) ! = 2 )
[PATCH] netdev - udevdb+dev.d changes
Here is a patch to change the netdev handling in the database and for
the dev.d/ calls. I applies on top of the udevd.patch, cause klibc has
no sysinfo().
o netdev's are also put into our database now. I want this for the
udevruler gui to get a list of all handled devices.
All devices in the db are stamped with the system uptime value at
the creation time. 'udevinfo -d' prints it.
o the DEVPATH value is the key for udevdb, but if we rename
a netdev, the name is replaced in the kernel, so we add
the changed name to the db to match with the remove event.
NOTE: The dev.d/ scripts still get the original name from the
hotplug call. Should we replace DEVPATH with the new name too?
o We now only add a device to the db, if we have successfully created
the main node or successfully renamed a netdev. This is the main part
of the patch, cause I needed to clean the retval passing trough all
the functions used for node creation.
o DEVNODE sounds a bit ugly for netdev's so I exported DEVNAME too.
Can we change the name?
o I've added a UDEV_NO_DEVD to possibly skip the script execution
and used it in udev-test.pl.
udevstart is the same horror now, if you have scripts with logging
statements in dev.d/ it takes minutes to finish, can we skip the
scripts here too?
o The get_device_type() function is changed to be more strict, cause
'udevinfo -a -p /block/' gets a class device for it and tries to
print the major/minor values.
o bugfix, the RESULT value has now a working newline removal and a test
for this case.
2004-04-01 11:12:57 +04:00
goto error ;
2003-11-25 09:27:17 +03:00
dbg ( " found major=%d, minor=%d " , udev - > major , udev - > minor ) ;
2003-07-21 07:48:48 +04:00
[PATCH] netdev - udevdb+dev.d changes
Here is a patch to change the netdev handling in the database and for
the dev.d/ calls. I applies on top of the udevd.patch, cause klibc has
no sysinfo().
o netdev's are also put into our database now. I want this for the
udevruler gui to get a list of all handled devices.
All devices in the db are stamped with the system uptime value at
the creation time. 'udevinfo -d' prints it.
o the DEVPATH value is the key for udevdb, but if we rename
a netdev, the name is replaced in the kernel, so we add
the changed name to the db to match with the remove event.
NOTE: The dev.d/ scripts still get the original name from the
hotplug call. Should we replace DEVPATH with the new name too?
o We now only add a device to the db, if we have successfully created
the main node or successfully renamed a netdev. This is the main part
of the patch, cause I needed to clean the retval passing trough all
the functions used for node creation.
o DEVNODE sounds a bit ugly for netdev's so I exported DEVNAME too.
Can we change the name?
o I've added a UDEV_NO_DEVD to possibly skip the script execution
and used it in udev-test.pl.
udevstart is the same horror now, if you have scripts with logging
statements in dev.d/ it takes minutes to finish, can we skip the
scripts here too?
o The get_device_type() function is changed to be more strict, cause
'udevinfo -a -p /block/' gets a class device for it and tries to
print the major/minor values.
o bugfix, the RESULT value has now a working newline removal and a test
for this case.
2004-04-01 11:12:57 +04:00
return 0 ;
error :
return - 1 ;
2003-07-21 07:48:48 +04:00
}
2003-12-07 20:12:07 +03:00
static int create_path ( char * file )
{
char p [ NAME_SIZE ] ;
char * pos ;
int retval ;
struct stat stats ;
2004-02-27 06:37:47 +03:00
strfieldcpy ( p , file ) ;
2003-12-07 20:12:07 +03:00
pos = strchr ( p + 1 , ' / ' ) ;
while ( 1 ) {
pos = strchr ( pos + 1 , ' / ' ) ;
if ( pos = = NULL )
break ;
* pos = 0x00 ;
if ( stat ( p , & stats ) ) {
retval = mkdir ( p , 0755 ) ;
2004-02-12 09:28:51 +03:00
if ( retval ! = 0 ) {
2003-12-07 20:12:07 +03:00
dbg ( " mkdir(%s) failed with error '%s' " ,
p , strerror ( errno ) ) ;
return retval ;
}
dbg ( " created '%s' " , p ) ;
}
* pos = ' / ' ;
}
return 0 ;
}
2004-04-03 10:16:38 +04:00
static int make_node ( char * file , int major , int minor , unsigned int mode , uid_t uid , gid_t gid )
2004-02-17 08:44:28 +03:00
{
2004-04-03 10:16:38 +04:00
struct stat stats ;
int retval = 0 ;
if ( stat ( file , & stats ) ! = 0 )
goto create ;
/* preserve node with already correct numbers, to not change the inode number */
if ( ( ( stats . st_mode & S_IFMT ) = = S_IFBLK | | ( stats . st_mode & S_IFMT ) = = S_IFCHR ) & &
( stats . st_rdev = = makedev ( major , minor ) ) ) {
dbg ( " preserve file '%s', cause it has correct dev_t " , file ) ;
goto perms ;
}
if ( unlink ( file ) ! = 0 )
dbg ( " unlink(%s) failed with error '%s' " , file , strerror ( errno ) ) ;
else
dbg ( " already present file '%s' unlinked " , file ) ;
2004-02-17 08:44:28 +03:00
2004-04-03 10:16:38 +04:00
create :
retval = mknod ( file , mode , makedev ( major , minor ) ) ;
2004-02-17 08:44:28 +03:00
if ( retval ! = 0 ) {
dbg ( " mknod(%s, %#o, %u, %u) failed with error '%s' " ,
2004-04-03 10:16:38 +04:00
file , mode , major , minor , strerror ( errno ) ) ;
[PATCH] netdev - udevdb+dev.d changes
Here is a patch to change the netdev handling in the database and for
the dev.d/ calls. I applies on top of the udevd.patch, cause klibc has
no sysinfo().
o netdev's are also put into our database now. I want this for the
udevruler gui to get a list of all handled devices.
All devices in the db are stamped with the system uptime value at
the creation time. 'udevinfo -d' prints it.
o the DEVPATH value is the key for udevdb, but if we rename
a netdev, the name is replaced in the kernel, so we add
the changed name to the db to match with the remove event.
NOTE: The dev.d/ scripts still get the original name from the
hotplug call. Should we replace DEVPATH with the new name too?
o We now only add a device to the db, if we have successfully created
the main node or successfully renamed a netdev. This is the main part
of the patch, cause I needed to clean the retval passing trough all
the functions used for node creation.
o DEVNODE sounds a bit ugly for netdev's so I exported DEVNAME too.
Can we change the name?
o I've added a UDEV_NO_DEVD to possibly skip the script execution
and used it in udev-test.pl.
udevstart is the same horror now, if you have scripts with logging
statements in dev.d/ it takes minutes to finish, can we skip the
scripts here too?
o The get_device_type() function is changed to be more strict, cause
'udevinfo -a -p /block/' gets a class device for it and tries to
print the major/minor values.
o bugfix, the RESULT value has now a working newline removal and a test
for this case.
2004-04-01 11:12:57 +04:00
goto exit ;
2004-02-17 08:44:28 +03:00
}
2004-04-03 10:16:38 +04:00
perms :
dbg ( " chmod(%s, %#o) " , file , mode ) ;
if ( chmod ( file , mode ) ! = 0 ) {
dbg ( " chmod(%s, %#o) failed with error '%s' " , file , mode , strerror ( errno ) ) ;
[PATCH] netdev - udevdb+dev.d changes
Here is a patch to change the netdev handling in the database and for
the dev.d/ calls. I applies on top of the udevd.patch, cause klibc has
no sysinfo().
o netdev's are also put into our database now. I want this for the
udevruler gui to get a list of all handled devices.
All devices in the db are stamped with the system uptime value at
the creation time. 'udevinfo -d' prints it.
o the DEVPATH value is the key for udevdb, but if we rename
a netdev, the name is replaced in the kernel, so we add
the changed name to the db to match with the remove event.
NOTE: The dev.d/ scripts still get the original name from the
hotplug call. Should we replace DEVPATH with the new name too?
o We now only add a device to the db, if we have successfully created
the main node or successfully renamed a netdev. This is the main part
of the patch, cause I needed to clean the retval passing trough all
the functions used for node creation.
o DEVNODE sounds a bit ugly for netdev's so I exported DEVNAME too.
Can we change the name?
o I've added a UDEV_NO_DEVD to possibly skip the script execution
and used it in udev-test.pl.
udevstart is the same horror now, if you have scripts with logging
statements in dev.d/ it takes minutes to finish, can we skip the
scripts here too?
o The get_device_type() function is changed to be more strict, cause
'udevinfo -a -p /block/' gets a class device for it and tries to
print the major/minor values.
o bugfix, the RESULT value has now a working newline removal and a test
for this case.
2004-04-01 11:12:57 +04:00
goto exit ;
2004-02-17 08:44:28 +03:00
}
if ( uid ! = 0 | | gid ! = 0 ) {
2004-04-03 10:16:38 +04:00
dbg ( " chown(%s, %u, %u) " , file , uid , gid ) ;
if ( chown ( file , uid , gid ) ! = 0 ) {
2004-02-17 08:44:28 +03:00
dbg ( " chown(%s, %u, %u) failed with error '%s' " ,
2004-04-03 10:16:38 +04:00
file , uid , gid , strerror ( errno ) ) ;
[PATCH] netdev - udevdb+dev.d changes
Here is a patch to change the netdev handling in the database and for
the dev.d/ calls. I applies on top of the udevd.patch, cause klibc has
no sysinfo().
o netdev's are also put into our database now. I want this for the
udevruler gui to get a list of all handled devices.
All devices in the db are stamped with the system uptime value at
the creation time. 'udevinfo -d' prints it.
o the DEVPATH value is the key for udevdb, but if we rename
a netdev, the name is replaced in the kernel, so we add
the changed name to the db to match with the remove event.
NOTE: The dev.d/ scripts still get the original name from the
hotplug call. Should we replace DEVPATH with the new name too?
o We now only add a device to the db, if we have successfully created
the main node or successfully renamed a netdev. This is the main part
of the patch, cause I needed to clean the retval passing trough all
the functions used for node creation.
o DEVNODE sounds a bit ugly for netdev's so I exported DEVNAME too.
Can we change the name?
o I've added a UDEV_NO_DEVD to possibly skip the script execution
and used it in udev-test.pl.
udevstart is the same horror now, if you have scripts with logging
statements in dev.d/ it takes minutes to finish, can we skip the
scripts here too?
o The get_device_type() function is changed to be more strict, cause
'udevinfo -a -p /block/' gets a class device for it and tries to
print the major/minor values.
o bugfix, the RESULT value has now a working newline removal and a test
for this case.
2004-04-01 11:12:57 +04:00
goto exit ;
2004-02-17 08:44:28 +03:00
}
}
[PATCH] netdev - udevdb+dev.d changes
Here is a patch to change the netdev handling in the database and for
the dev.d/ calls. I applies on top of the udevd.patch, cause klibc has
no sysinfo().
o netdev's are also put into our database now. I want this for the
udevruler gui to get a list of all handled devices.
All devices in the db are stamped with the system uptime value at
the creation time. 'udevinfo -d' prints it.
o the DEVPATH value is the key for udevdb, but if we rename
a netdev, the name is replaced in the kernel, so we add
the changed name to the db to match with the remove event.
NOTE: The dev.d/ scripts still get the original name from the
hotplug call. Should we replace DEVPATH with the new name too?
o We now only add a device to the db, if we have successfully created
the main node or successfully renamed a netdev. This is the main part
of the patch, cause I needed to clean the retval passing trough all
the functions used for node creation.
o DEVNODE sounds a bit ugly for netdev's so I exported DEVNAME too.
Can we change the name?
o I've added a UDEV_NO_DEVD to possibly skip the script execution
and used it in udev-test.pl.
udevstart is the same horror now, if you have scripts with logging
statements in dev.d/ it takes minutes to finish, can we skip the
scripts here too?
o The get_device_type() function is changed to be more strict, cause
'udevinfo -a -p /block/' gets a class device for it and tries to
print the major/minor values.
o bugfix, the RESULT value has now a working newline removal and a test
for this case.
2004-04-01 11:12:57 +04:00
exit :
return retval ;
2004-02-17 08:44:28 +03:00
}
2004-03-02 09:42:30 +03:00
/* get the local logged in user */
static void set_to_local_user ( char * user )
{
struct utmp * u ;
time_t recent = 0 ;
2004-03-10 06:50:15 +03:00
strfieldcpymax ( user , default_owner_str , OWNER_SIZE ) ;
2004-03-02 09:42:30 +03:00
setutent ( ) ;
while ( 1 ) {
u = getutent ( ) ;
if ( u = = NULL )
break ;
/* is this a user login ? */
if ( u - > ut_type ! = USER_PROCESS )
continue ;
/* is this a local login ? */
if ( strcmp ( u - > ut_host , " " ) )
continue ;
if ( u - > ut_time > recent ) {
recent = u - > ut_time ;
2004-03-10 06:50:15 +03:00
strfieldcpymax ( user , u - > ut_user , OWNER_SIZE ) ;
2004-03-02 09:42:30 +03:00
dbg ( " local user is '%s' " , user ) ;
break ;
}
}
endutent ( ) ;
}
2004-03-02 10:31:06 +03:00
static int create_node ( struct udevice * dev , int fake )
{
2004-03-04 05:16:35 +03:00
char filename [ NAME_SIZE ] ;
char linkname [ NAME_SIZE ] ;
char linktarget [ NAME_SIZE ] ;
char partitionname [ NAME_SIZE ] ;
2003-11-12 14:50:33 +03:00
uid_t uid = 0 ;
gid_t gid = 0 ;
2003-12-07 20:12:07 +03:00
int i ;
int tail ;
[PATCH] better fix for NAME="foo-%c{N}" gets a truncated name
On Wed, Mar 03, 2004 at 04:56:34PM -0800, Greg KH wrote:
> On Wed, Mar 03, 2004 at 03:57:04PM -0800, Patrick Mansfield wrote:
> >
> > Here is a patch for some new tests.
>
> Applied, thanks.
Here is a small improvement, which looks much better.
Hey Pat, thanks a lot for finding the recent bug, hope this one will
not break it again :)
2004-03-05 05:55:34 +03:00
char * pos ;
int len ;
2003-12-07 20:12:07 +03:00
2004-02-27 06:37:47 +03:00
strfieldcpy ( filename , udev_root ) ;
strfieldcat ( filename , dev - > name ) ;
2003-10-21 09:48:44 +04:00
switch ( dev - > type ) {
2003-08-05 08:59:50 +04:00
case ' b ' :
2003-10-21 09:48:44 +04:00
dev - > mode | = S_IFBLK ;
2003-08-05 08:59:50 +04:00
break ;
case ' c ' :
case ' u ' :
2003-10-21 09:48:44 +04:00
dev - > mode | = S_IFCHR ;
2003-08-05 08:59:50 +04:00
break ;
case ' p ' :
2003-10-21 09:48:44 +04:00
dev - > mode | = S_IFIFO ;
2003-08-05 08:59:50 +04:00
break ;
default :
2003-10-21 09:48:44 +04:00
dbg ( " unknown node type %c \n " , dev - > type ) ;
2003-08-05 08:59:50 +04:00
return - EINVAL ;
}
2003-08-05 08:39:33 +04:00
2003-12-07 20:12:07 +03:00
/* create parent directories if needed */
if ( strrchr ( dev - > name , ' / ' ) )
create_path ( filename ) ;
2003-11-12 14:48:01 +03:00
2004-02-12 09:28:51 +03:00
if ( dev - > owner [ 0 ] ! = ' \0 ' ) {
2003-11-12 14:47:57 +03:00
char * endptr ;
unsigned long id = strtoul ( dev - > owner , & endptr , 10 ) ;
2004-01-20 06:44:24 +03:00
if ( endptr [ 0 ] = = ' \0 ' )
2003-11-12 14:47:57 +03:00
uid = ( uid_t ) id ;
2003-11-24 07:56:18 +03:00
else {
2004-03-04 11:51:28 +03:00
struct passwd * pw ;
2004-03-02 09:42:30 +03:00
if ( strncmp ( dev - > owner , LOCAL_USER , sizeof ( LOCAL_USER ) ) = = 0 )
set_to_local_user ( dev - > owner ) ;
2004-03-04 11:51:28 +03:00
pw = getpwnam ( dev - > owner ) ;
2004-01-20 06:44:24 +03:00
if ( pw = = NULL )
dbg ( " specified user unknown '%s' " , dev - > owner ) ;
2003-11-24 07:56:18 +03:00
else
uid = pw - > pw_uid ;
}
2003-11-12 14:47:57 +03:00
}
2004-02-12 09:28:51 +03:00
if ( dev - > group [ 0 ] ! = ' \0 ' ) {
2003-11-12 14:47:57 +03:00
char * endptr ;
unsigned long id = strtoul ( dev - > group , & endptr , 10 ) ;
2004-01-20 06:44:24 +03:00
if ( endptr [ 0 ] = = ' \0 ' )
2003-11-12 14:47:57 +03:00
gid = ( gid_t ) id ;
2003-11-24 07:56:18 +03:00
else {
struct group * gr = getgrnam ( dev - > group ) ;
2004-01-20 06:44:24 +03:00
if ( gr = = NULL )
dbg ( " specified group unknown '%s' " , dev - > group ) ;
2003-11-24 07:56:18 +03:00
else
gid = gr - > gr_gid ;
}
2003-11-12 14:47:57 +03:00
}
2004-02-17 08:58:25 +03:00
if ( ! fake ) {
2004-02-17 08:44:28 +03:00
info ( " creating device node '%s' " , filename ) ;
[PATCH] netdev - udevdb+dev.d changes
Here is a patch to change the netdev handling in the database and for
the dev.d/ calls. I applies on top of the udevd.patch, cause klibc has
no sysinfo().
o netdev's are also put into our database now. I want this for the
udevruler gui to get a list of all handled devices.
All devices in the db are stamped with the system uptime value at
the creation time. 'udevinfo -d' prints it.
o the DEVPATH value is the key for udevdb, but if we rename
a netdev, the name is replaced in the kernel, so we add
the changed name to the db to match with the remove event.
NOTE: The dev.d/ scripts still get the original name from the
hotplug call. Should we replace DEVPATH with the new name too?
o We now only add a device to the db, if we have successfully created
the main node or successfully renamed a netdev. This is the main part
of the patch, cause I needed to clean the retval passing trough all
the functions used for node creation.
o DEVNODE sounds a bit ugly for netdev's so I exported DEVNAME too.
Can we change the name?
o I've added a UDEV_NO_DEVD to possibly skip the script execution
and used it in udev-test.pl.
udevstart is the same horror now, if you have scripts with logging
statements in dev.d/ it takes minutes to finish, can we skip the
scripts here too?
o The get_device_type() function is changed to be more strict, cause
'udevinfo -a -p /block/' gets a class device for it and tries to
print the major/minor values.
o bugfix, the RESULT value has now a working newline removal and a test
for this case.
2004-04-01 11:12:57 +04:00
if ( make_node ( filename , dev - > major , dev - > minor , dev - > mode , uid , gid ) ! = 0 )
goto error ;
2004-02-17 08:58:25 +03:00
} else {
info ( " creating device node '%s', major = '%d', minor = '%d', "
" mode = '%#o', uid = '%d', gid = '%d' " , filename ,
dev - > major , dev - > minor , ( mode_t ) dev - > mode , uid , gid ) ;
}
2004-02-17 08:44:28 +03:00
[PATCH] netdev - udevdb+dev.d changes
Here is a patch to change the netdev handling in the database and for
the dev.d/ calls. I applies on top of the udevd.patch, cause klibc has
no sysinfo().
o netdev's are also put into our database now. I want this for the
udevruler gui to get a list of all handled devices.
All devices in the db are stamped with the system uptime value at
the creation time. 'udevinfo -d' prints it.
o the DEVPATH value is the key for udevdb, but if we rename
a netdev, the name is replaced in the kernel, so we add
the changed name to the db to match with the remove event.
NOTE: The dev.d/ scripts still get the original name from the
hotplug call. Should we replace DEVPATH with the new name too?
o We now only add a device to the db, if we have successfully created
the main node or successfully renamed a netdev. This is the main part
of the patch, cause I needed to clean the retval passing trough all
the functions used for node creation.
o DEVNODE sounds a bit ugly for netdev's so I exported DEVNAME too.
Can we change the name?
o I've added a UDEV_NO_DEVD to possibly skip the script execution
and used it in udev-test.pl.
udevstart is the same horror now, if you have scripts with logging
statements in dev.d/ it takes minutes to finish, can we skip the
scripts here too?
o The get_device_type() function is changed to be more strict, cause
'udevinfo -a -p /block/' gets a class device for it and tries to
print the major/minor values.
o bugfix, the RESULT value has now a working newline removal and a test
for this case.
2004-04-01 11:12:57 +04:00
/* create all_partitions if requested */
2004-02-17 08:44:28 +03:00
if ( dev - > partitions > 0 ) {
info ( " creating device partition nodes '%s[1-%i]' " , filename , dev - > partitions ) ;
2004-02-17 08:58:25 +03:00
if ( ! fake ) {
for ( i = 1 ; i < = dev - > partitions ; i + + ) {
2004-02-28 12:59:02 +03:00
strfieldcpy ( partitionname , filename ) ;
strintcat ( partitionname , i ) ;
2004-02-17 08:58:25 +03:00
make_node ( partitionname , dev - > major ,
dev - > minor + i , dev - > mode , uid , gid ) ;
}
2004-02-17 08:44:28 +03:00
}
2003-12-07 20:12:07 +03:00
}
[PATCH] netdev - udevdb+dev.d changes
Here is a patch to change the netdev handling in the database and for
the dev.d/ calls. I applies on top of the udevd.patch, cause klibc has
no sysinfo().
o netdev's are also put into our database now. I want this for the
udevruler gui to get a list of all handled devices.
All devices in the db are stamped with the system uptime value at
the creation time. 'udevinfo -d' prints it.
o the DEVPATH value is the key for udevdb, but if we rename
a netdev, the name is replaced in the kernel, so we add
the changed name to the db to match with the remove event.
NOTE: The dev.d/ scripts still get the original name from the
hotplug call. Should we replace DEVPATH with the new name too?
o We now only add a device to the db, if we have successfully created
the main node or successfully renamed a netdev. This is the main part
of the patch, cause I needed to clean the retval passing trough all
the functions used for node creation.
o DEVNODE sounds a bit ugly for netdev's so I exported DEVNAME too.
Can we change the name?
o I've added a UDEV_NO_DEVD to possibly skip the script execution
and used it in udev-test.pl.
udevstart is the same horror now, if you have scripts with logging
statements in dev.d/ it takes minutes to finish, can we skip the
scripts here too?
o The get_device_type() function is changed to be more strict, cause
'udevinfo -a -p /block/' gets a class device for it and tries to
print the major/minor values.
o bugfix, the RESULT value has now a working newline removal and a test
for this case.
2004-04-01 11:12:57 +04:00
/* create symlink(s) if requested */
2004-03-04 05:16:35 +03:00
foreach_strpart ( dev - > symlink , " " , pos , len ) {
2004-03-10 06:50:15 +03:00
strfieldcpymax ( linkname , pos , len + 1 ) ;
2004-03-04 05:16:35 +03:00
strfieldcpy ( filename , udev_root ) ;
strfieldcat ( filename , linkname ) ;
dbg ( " symlink '%s' to node '%s' requested " , filename , dev - > name ) ;
if ( ! fake )
if ( strrchr ( linkname , ' / ' ) )
create_path ( filename ) ;
/* optimize relative link */
linktarget [ 0 ] = ' \0 ' ;
i = 0 ;
tail = 0 ;
while ( ( dev - > name [ i ] = = linkname [ i ] ) & & dev - > name [ i ] ) {
if ( dev - > name [ i ] = = ' / ' )
tail = i + 1 ;
i + + ;
}
while ( linkname [ i ] ! = ' \0 ' ) {
if ( linkname [ i ] = = ' / ' )
strfieldcat ( linktarget , " ../ " ) ;
i + + ;
}
2003-12-07 20:12:07 +03:00
2004-03-04 05:16:35 +03:00
strfieldcat ( linktarget , & dev - > name [ tail ] ) ;
2003-12-07 20:12:07 +03:00
2004-03-04 05:16:35 +03:00
dbg ( " symlink(%s, %s) " , linktarget , filename ) ;
if ( ! fake ) {
2004-04-03 10:16:38 +04:00
unlink ( filename ) ;
[PATCH] netdev - udevdb+dev.d changes
Here is a patch to change the netdev handling in the database and for
the dev.d/ calls. I applies on top of the udevd.patch, cause klibc has
no sysinfo().
o netdev's are also put into our database now. I want this for the
udevruler gui to get a list of all handled devices.
All devices in the db are stamped with the system uptime value at
the creation time. 'udevinfo -d' prints it.
o the DEVPATH value is the key for udevdb, but if we rename
a netdev, the name is replaced in the kernel, so we add
the changed name to the db to match with the remove event.
NOTE: The dev.d/ scripts still get the original name from the
hotplug call. Should we replace DEVPATH with the new name too?
o We now only add a device to the db, if we have successfully created
the main node or successfully renamed a netdev. This is the main part
of the patch, cause I needed to clean the retval passing trough all
the functions used for node creation.
o DEVNODE sounds a bit ugly for netdev's so I exported DEVNAME too.
Can we change the name?
o I've added a UDEV_NO_DEVD to possibly skip the script execution
and used it in udev-test.pl.
udevstart is the same horror now, if you have scripts with logging
statements in dev.d/ it takes minutes to finish, can we skip the
scripts here too?
o The get_device_type() function is changed to be more strict, cause
'udevinfo -a -p /block/' gets a class device for it and tries to
print the major/minor values.
o bugfix, the RESULT value has now a working newline removal and a test
for this case.
2004-04-01 11:12:57 +04:00
if ( symlink ( linktarget , filename ) ! = 0 )
2004-03-04 05:16:35 +03:00
dbg ( " symlink(%s, %s) failed with error '%s' " ,
linktarget , filename , strerror ( errno ) ) ;
2003-12-10 11:47:00 +03:00
}
2003-11-12 14:47:57 +03:00
}
[PATCH] netdev - udevdb+dev.d changes
Here is a patch to change the netdev handling in the database and for
the dev.d/ calls. I applies on top of the udevd.patch, cause klibc has
no sysinfo().
o netdev's are also put into our database now. I want this for the
udevruler gui to get a list of all handled devices.
All devices in the db are stamped with the system uptime value at
the creation time. 'udevinfo -d' prints it.
o the DEVPATH value is the key for udevdb, but if we rename
a netdev, the name is replaced in the kernel, so we add
the changed name to the db to match with the remove event.
NOTE: The dev.d/ scripts still get the original name from the
hotplug call. Should we replace DEVPATH with the new name too?
o We now only add a device to the db, if we have successfully created
the main node or successfully renamed a netdev. This is the main part
of the patch, cause I needed to clean the retval passing trough all
the functions used for node creation.
o DEVNODE sounds a bit ugly for netdev's so I exported DEVNAME too.
Can we change the name?
o I've added a UDEV_NO_DEVD to possibly skip the script execution
and used it in udev-test.pl.
udevstart is the same horror now, if you have scripts with logging
statements in dev.d/ it takes minutes to finish, can we skip the
scripts here too?
o The get_device_type() function is changed to be more strict, cause
'udevinfo -a -p /block/' gets a class device for it and tries to
print the major/minor values.
o bugfix, the RESULT value has now a working newline removal and a test
for this case.
2004-04-01 11:12:57 +04:00
return 0 ;
error :
return - 1 ;
2003-07-21 07:48:48 +04:00
}
2003-10-20 08:55:43 +04:00
static struct sysfs_class_device * get_class_dev ( char * device_name )
2003-07-21 07:48:48 +04:00
{
char dev_path [ SYSFS_PATH_MAX ] ;
2003-08-05 09:13:35 +04:00
struct sysfs_class_device * class_dev = NULL ;
2004-02-27 06:37:47 +03:00
strfieldcpy ( dev_path , sysfs_path ) ;
strfieldcat ( dev_path , device_name ) ;
2003-11-25 09:27:17 +03:00
dbg ( " looking at '%s' " , dev_path ) ;
2003-07-21 07:48:48 +04:00
/* open up the sysfs class device for this thing... */
2003-12-20 05:29:10 +03:00
class_dev = sysfs_open_class_device_path ( dev_path ) ;
2003-07-21 07:48:48 +04:00
if ( class_dev = = NULL ) {
2003-12-20 05:29:10 +03:00
dbg ( " sysfs_open_class_device_path failed " ) ;
2003-08-05 09:13:35 +04:00
goto exit ;
2003-07-21 07:48:48 +04:00
}
2003-11-25 09:27:17 +03:00
dbg ( " class_dev->name='%s' " , class_dev - > name ) ;
2003-07-21 07:48:48 +04:00
2003-08-05 09:13:35 +04:00
exit :
2003-07-21 07:48:48 +04:00
return class_dev ;
}
2003-10-21 08:03:15 +04:00
/* wait for the "dev" file to show up in the directory in sysfs.
* If it doesn ' t happen in about 10 seconds , give up .
*/
[PATCH] hmm, handle net devices with udev?
Hmm, Arndt Bergmann sent a patch like this one a few weeks ago and
I want to bring the question back, if we want to handle net device
naming with udev.
With this patch it is actually possible to specify something like this
in udev.rules:
KERNEL="dummy*", SYSFS{address}="00:00:00:00:00:00", SYSFS{features}="0x0", NAME="blind%n"
KERNEL="eth*", SYSFS{address}="00:0d:60:77:30:91", NAME="private"
and you will get:
[root@pim udev.kay]# cat /proc/net/dev
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 1500 30 0 0 0 0 0 0 1500 30 0 0 0 0 0 0
private: 278393 1114 0 0 0 0 0 0 153204 1468 0 0 0 0 0 0
sit0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
blind0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
The udevinfo program is also working:
[root@pim udev.kay]# ./udevinfo -a -p /sys/class/net/private
looking at class device '/sys/class/net/private':
SYSFS{addr_len}="6"
SYSFS{address}="00:0d:60:77:30:91"
SYSFS{broadcast}="ff:ff:ff:ff:ff:ff"
SYSFS{features}="0x3a9"
SYSFS{flags}="0x1003"
SYSFS{ifindex}="2"
SYSFS{iflink}="2"
SYSFS{mtu}="1500"
SYSFS{tx_queue_len}="1000"
SYSFS{type}="1"
follow the class device's "device"
looking at the device chain at '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:01.0':
BUS="pci"
ID="0000:02:01.0"
SYSFS{class}="0x020000"
SYSFS{detach_state}="0"
SYSFS{device}="0x101e"
SYSFS{irq}="11"
SYSFS{subsystem_device}="0x0549"
SYSFS{subsystem_vendor}="0x1014"
SYSFS{vendor}="0x8086"
The matching device will be renamed to the given name. The device name
will not be put into the udev database, cause the kernel renames the
device and the sysfs name disappears.
I like it, cause it plugs in nicely. We have all the naming features
and sysfs queries and walks inside of udev. The sysfs timing races
are already solved and the management tools are working for net devices
too. nameif can only match the MAC address now. udev can match any sysfs
value of the device tree the net device is connected to.
But right, net devices do not have device nodes :)
2004-03-25 10:19:39 +03:00
# define SECONDS_TO_WAIT_FOR_FILE 10
static int sleep_for_file ( char * path , char * file )
2003-10-21 08:03:15 +04:00
{
char filename [ SYSFS_PATH_MAX + 6 ] ;
[PATCH] hmm, handle net devices with udev?
Hmm, Arndt Bergmann sent a patch like this one a few weeks ago and
I want to bring the question back, if we want to handle net device
naming with udev.
With this patch it is actually possible to specify something like this
in udev.rules:
KERNEL="dummy*", SYSFS{address}="00:00:00:00:00:00", SYSFS{features}="0x0", NAME="blind%n"
KERNEL="eth*", SYSFS{address}="00:0d:60:77:30:91", NAME="private"
and you will get:
[root@pim udev.kay]# cat /proc/net/dev
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 1500 30 0 0 0 0 0 0 1500 30 0 0 0 0 0 0
private: 278393 1114 0 0 0 0 0 0 153204 1468 0 0 0 0 0 0
sit0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
blind0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
The udevinfo program is also working:
[root@pim udev.kay]# ./udevinfo -a -p /sys/class/net/private
looking at class device '/sys/class/net/private':
SYSFS{addr_len}="6"
SYSFS{address}="00:0d:60:77:30:91"
SYSFS{broadcast}="ff:ff:ff:ff:ff:ff"
SYSFS{features}="0x3a9"
SYSFS{flags}="0x1003"
SYSFS{ifindex}="2"
SYSFS{iflink}="2"
SYSFS{mtu}="1500"
SYSFS{tx_queue_len}="1000"
SYSFS{type}="1"
follow the class device's "device"
looking at the device chain at '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:01.0':
BUS="pci"
ID="0000:02:01.0"
SYSFS{class}="0x020000"
SYSFS{detach_state}="0"
SYSFS{device}="0x101e"
SYSFS{irq}="11"
SYSFS{subsystem_device}="0x0549"
SYSFS{subsystem_vendor}="0x1014"
SYSFS{vendor}="0x8086"
The matching device will be renamed to the given name. The device name
will not be put into the udev database, cause the kernel renames the
device and the sysfs name disappears.
I like it, cause it plugs in nicely. We have all the naming features
and sysfs queries and walks inside of udev. The sysfs timing races
are already solved and the management tools are working for net devices
too. nameif can only match the MAC address now. udev can match any sysfs
value of the device tree the net device is connected to.
But right, net devices do not have device nodes :)
2004-03-25 10:19:39 +03:00
int loop = SECONDS_TO_WAIT_FOR_FILE ;
2003-10-23 11:50:27 +04:00
int retval ;
2003-10-21 08:03:15 +04:00
2004-02-27 06:37:47 +03:00
strfieldcpy ( filename , sysfs_path ) ;
strfieldcat ( filename , path ) ;
[PATCH] hmm, handle net devices with udev?
Hmm, Arndt Bergmann sent a patch like this one a few weeks ago and
I want to bring the question back, if we want to handle net device
naming with udev.
With this patch it is actually possible to specify something like this
in udev.rules:
KERNEL="dummy*", SYSFS{address}="00:00:00:00:00:00", SYSFS{features}="0x0", NAME="blind%n"
KERNEL="eth*", SYSFS{address}="00:0d:60:77:30:91", NAME="private"
and you will get:
[root@pim udev.kay]# cat /proc/net/dev
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 1500 30 0 0 0 0 0 0 1500 30 0 0 0 0 0 0
private: 278393 1114 0 0 0 0 0 0 153204 1468 0 0 0 0 0 0
sit0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
blind0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
The udevinfo program is also working:
[root@pim udev.kay]# ./udevinfo -a -p /sys/class/net/private
looking at class device '/sys/class/net/private':
SYSFS{addr_len}="6"
SYSFS{address}="00:0d:60:77:30:91"
SYSFS{broadcast}="ff:ff:ff:ff:ff:ff"
SYSFS{features}="0x3a9"
SYSFS{flags}="0x1003"
SYSFS{ifindex}="2"
SYSFS{iflink}="2"
SYSFS{mtu}="1500"
SYSFS{tx_queue_len}="1000"
SYSFS{type}="1"
follow the class device's "device"
looking at the device chain at '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:01.0':
BUS="pci"
ID="0000:02:01.0"
SYSFS{class}="0x020000"
SYSFS{detach_state}="0"
SYSFS{device}="0x101e"
SYSFS{irq}="11"
SYSFS{subsystem_device}="0x0549"
SYSFS{subsystem_vendor}="0x1014"
SYSFS{vendor}="0x8086"
The matching device will be renamed to the given name. The device name
will not be put into the udev database, cause the kernel renames the
device and the sysfs name disappears.
I like it, cause it plugs in nicely. We have all the naming features
and sysfs queries and walks inside of udev. The sysfs timing races
are already solved and the management tools are working for net devices
too. nameif can only match the MAC address now. udev can match any sysfs
value of the device tree the net device is connected to.
But right, net devices do not have device nodes :)
2004-03-25 10:19:39 +03:00
strfieldcat ( filename , file ) ;
2003-10-21 08:03:15 +04:00
2003-10-23 11:50:27 +04:00
while ( loop - - ) {
struct stat buf ;
2003-11-25 09:27:17 +03:00
dbg ( " looking for '%s' " , filename ) ;
2003-10-21 08:03:15 +04:00
retval = stat ( filename , & buf ) ;
2004-02-12 09:28:51 +03:00
if ( retval = = 0 )
2003-10-21 08:03:15 +04:00
goto exit ;
2003-11-25 09:27:17 +03:00
/* sleep to give the kernel a chance to create the dev file */
2003-10-21 08:03:15 +04:00
sleep ( 1 ) ;
}
retval = - ENODEV ;
exit :
return retval ;
}
[PATCH] netdev - udevdb+dev.d changes
Here is a patch to change the netdev handling in the database and for
the dev.d/ calls. I applies on top of the udevd.patch, cause klibc has
no sysinfo().
o netdev's are also put into our database now. I want this for the
udevruler gui to get a list of all handled devices.
All devices in the db are stamped with the system uptime value at
the creation time. 'udevinfo -d' prints it.
o the DEVPATH value is the key for udevdb, but if we rename
a netdev, the name is replaced in the kernel, so we add
the changed name to the db to match with the remove event.
NOTE: The dev.d/ scripts still get the original name from the
hotplug call. Should we replace DEVPATH with the new name too?
o We now only add a device to the db, if we have successfully created
the main node or successfully renamed a netdev. This is the main part
of the patch, cause I needed to clean the retval passing trough all
the functions used for node creation.
o DEVNODE sounds a bit ugly for netdev's so I exported DEVNAME too.
Can we change the name?
o I've added a UDEV_NO_DEVD to possibly skip the script execution
and used it in udev-test.pl.
udevstart is the same horror now, if you have scripts with logging
statements in dev.d/ it takes minutes to finish, can we skip the
scripts here too?
o The get_device_type() function is changed to be more strict, cause
'udevinfo -a -p /block/' gets a class device for it and tries to
print the major/minor values.
o bugfix, the RESULT value has now a working newline removal and a test
for this case.
2004-04-01 11:12:57 +04:00
static int rename_net_if ( struct udevice * dev , int fake )
[PATCH] hmm, handle net devices with udev?
Hmm, Arndt Bergmann sent a patch like this one a few weeks ago and
I want to bring the question back, if we want to handle net device
naming with udev.
With this patch it is actually possible to specify something like this
in udev.rules:
KERNEL="dummy*", SYSFS{address}="00:00:00:00:00:00", SYSFS{features}="0x0", NAME="blind%n"
KERNEL="eth*", SYSFS{address}="00:0d:60:77:30:91", NAME="private"
and you will get:
[root@pim udev.kay]# cat /proc/net/dev
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 1500 30 0 0 0 0 0 0 1500 30 0 0 0 0 0 0
private: 278393 1114 0 0 0 0 0 0 153204 1468 0 0 0 0 0 0
sit0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
blind0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
The udevinfo program is also working:
[root@pim udev.kay]# ./udevinfo -a -p /sys/class/net/private
looking at class device '/sys/class/net/private':
SYSFS{addr_len}="6"
SYSFS{address}="00:0d:60:77:30:91"
SYSFS{broadcast}="ff:ff:ff:ff:ff:ff"
SYSFS{features}="0x3a9"
SYSFS{flags}="0x1003"
SYSFS{ifindex}="2"
SYSFS{iflink}="2"
SYSFS{mtu}="1500"
SYSFS{tx_queue_len}="1000"
SYSFS{type}="1"
follow the class device's "device"
looking at the device chain at '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:01.0':
BUS="pci"
ID="0000:02:01.0"
SYSFS{class}="0x020000"
SYSFS{detach_state}="0"
SYSFS{device}="0x101e"
SYSFS{irq}="11"
SYSFS{subsystem_device}="0x0549"
SYSFS{subsystem_vendor}="0x1014"
SYSFS{vendor}="0x8086"
The matching device will be renamed to the given name. The device name
will not be put into the udev database, cause the kernel renames the
device and the sysfs name disappears.
I like it, cause it plugs in nicely. We have all the naming features
and sysfs queries and walks inside of udev. The sysfs timing races
are already solved and the management tools are working for net devices
too. nameif can only match the MAC address now. udev can match any sysfs
value of the device tree the net device is connected to.
But right, net devices do not have device nodes :)
2004-03-25 10:19:39 +03:00
{
int sk ;
struct ifreq ifr ;
int retval ;
[PATCH] netdev - udevdb+dev.d changes
Here is a patch to change the netdev handling in the database and for
the dev.d/ calls. I applies on top of the udevd.patch, cause klibc has
no sysinfo().
o netdev's are also put into our database now. I want this for the
udevruler gui to get a list of all handled devices.
All devices in the db are stamped with the system uptime value at
the creation time. 'udevinfo -d' prints it.
o the DEVPATH value is the key for udevdb, but if we rename
a netdev, the name is replaced in the kernel, so we add
the changed name to the db to match with the remove event.
NOTE: The dev.d/ scripts still get the original name from the
hotplug call. Should we replace DEVPATH with the new name too?
o We now only add a device to the db, if we have successfully created
the main node or successfully renamed a netdev. This is the main part
of the patch, cause I needed to clean the retval passing trough all
the functions used for node creation.
o DEVNODE sounds a bit ugly for netdev's so I exported DEVNAME too.
Can we change the name?
o I've added a UDEV_NO_DEVD to possibly skip the script execution
and used it in udev-test.pl.
udevstart is the same horror now, if you have scripts with logging
statements in dev.d/ it takes minutes to finish, can we skip the
scripts here too?
o The get_device_type() function is changed to be more strict, cause
'udevinfo -a -p /block/' gets a class device for it and tries to
print the major/minor values.
o bugfix, the RESULT value has now a working newline removal and a test
for this case.
2004-04-01 11:12:57 +04:00
dbg ( " changing net interface name from '%s' to '%s' " , dev - > kernel_name , dev - > name ) ;
if ( fake )
return 0 ;
[PATCH] hmm, handle net devices with udev?
Hmm, Arndt Bergmann sent a patch like this one a few weeks ago and
I want to bring the question back, if we want to handle net device
naming with udev.
With this patch it is actually possible to specify something like this
in udev.rules:
KERNEL="dummy*", SYSFS{address}="00:00:00:00:00:00", SYSFS{features}="0x0", NAME="blind%n"
KERNEL="eth*", SYSFS{address}="00:0d:60:77:30:91", NAME="private"
and you will get:
[root@pim udev.kay]# cat /proc/net/dev
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 1500 30 0 0 0 0 0 0 1500 30 0 0 0 0 0 0
private: 278393 1114 0 0 0 0 0 0 153204 1468 0 0 0 0 0 0
sit0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
blind0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
The udevinfo program is also working:
[root@pim udev.kay]# ./udevinfo -a -p /sys/class/net/private
looking at class device '/sys/class/net/private':
SYSFS{addr_len}="6"
SYSFS{address}="00:0d:60:77:30:91"
SYSFS{broadcast}="ff:ff:ff:ff:ff:ff"
SYSFS{features}="0x3a9"
SYSFS{flags}="0x1003"
SYSFS{ifindex}="2"
SYSFS{iflink}="2"
SYSFS{mtu}="1500"
SYSFS{tx_queue_len}="1000"
SYSFS{type}="1"
follow the class device's "device"
looking at the device chain at '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:01.0':
BUS="pci"
ID="0000:02:01.0"
SYSFS{class}="0x020000"
SYSFS{detach_state}="0"
SYSFS{device}="0x101e"
SYSFS{irq}="11"
SYSFS{subsystem_device}="0x0549"
SYSFS{subsystem_vendor}="0x1014"
SYSFS{vendor}="0x8086"
The matching device will be renamed to the given name. The device name
will not be put into the udev database, cause the kernel renames the
device and the sysfs name disappears.
I like it, cause it plugs in nicely. We have all the naming features
and sysfs queries and walks inside of udev. The sysfs timing races
are already solved and the management tools are working for net devices
too. nameif can only match the MAC address now. udev can match any sysfs
value of the device tree the net device is connected to.
But right, net devices do not have device nodes :)
2004-03-25 10:19:39 +03:00
sk = socket ( PF_INET , SOCK_DGRAM , 0 ) ;
if ( sk < 0 ) {
dbg ( " error opening socket " ) ;
return - 1 ;
}
memset ( & ifr , 0x00 , sizeof ( struct ifreq ) ) ;
strfieldcpy ( ifr . ifr_name , dev - > kernel_name ) ;
strfieldcpy ( ifr . ifr_newname , dev - > name ) ;
retval = ioctl ( sk , SIOCSIFNAME , & ifr ) ;
if ( retval ! = 0 )
dbg ( " error changing net interface name " ) ;
2004-03-27 12:21:46 +03:00
close ( sk ) ;
[PATCH] hmm, handle net devices with udev?
Hmm, Arndt Bergmann sent a patch like this one a few weeks ago and
I want to bring the question back, if we want to handle net device
naming with udev.
With this patch it is actually possible to specify something like this
in udev.rules:
KERNEL="dummy*", SYSFS{address}="00:00:00:00:00:00", SYSFS{features}="0x0", NAME="blind%n"
KERNEL="eth*", SYSFS{address}="00:0d:60:77:30:91", NAME="private"
and you will get:
[root@pim udev.kay]# cat /proc/net/dev
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 1500 30 0 0 0 0 0 0 1500 30 0 0 0 0 0 0
private: 278393 1114 0 0 0 0 0 0 153204 1468 0 0 0 0 0 0
sit0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
blind0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
The udevinfo program is also working:
[root@pim udev.kay]# ./udevinfo -a -p /sys/class/net/private
looking at class device '/sys/class/net/private':
SYSFS{addr_len}="6"
SYSFS{address}="00:0d:60:77:30:91"
SYSFS{broadcast}="ff:ff:ff:ff:ff:ff"
SYSFS{features}="0x3a9"
SYSFS{flags}="0x1003"
SYSFS{ifindex}="2"
SYSFS{iflink}="2"
SYSFS{mtu}="1500"
SYSFS{tx_queue_len}="1000"
SYSFS{type}="1"
follow the class device's "device"
looking at the device chain at '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:01.0':
BUS="pci"
ID="0000:02:01.0"
SYSFS{class}="0x020000"
SYSFS{detach_state}="0"
SYSFS{device}="0x101e"
SYSFS{irq}="11"
SYSFS{subsystem_device}="0x0549"
SYSFS{subsystem_vendor}="0x1014"
SYSFS{vendor}="0x8086"
The matching device will be renamed to the given name. The device name
will not be put into the udev database, cause the kernel renames the
device and the sysfs name disappears.
I like it, cause it plugs in nicely. We have all the naming features
and sysfs queries and walks inside of udev. The sysfs timing races
are already solved and the management tools are working for net devices
too. nameif can only match the MAC address now. udev can match any sysfs
value of the device tree the net device is connected to.
But right, net devices do not have device nodes :)
2004-03-25 10:19:39 +03:00
return retval ;
}
2004-02-13 07:19:21 +03:00
int udev_add_device ( char * path , char * subsystem , int fake )
2003-07-21 07:48:48 +04:00
{
[PATCH] netdev - udevdb+dev.d changes
Here is a patch to change the netdev handling in the database and for
the dev.d/ calls. I applies on top of the udevd.patch, cause klibc has
no sysinfo().
o netdev's are also put into our database now. I want this for the
udevruler gui to get a list of all handled devices.
All devices in the db are stamped with the system uptime value at
the creation time. 'udevinfo -d' prints it.
o the DEVPATH value is the key for udevdb, but if we rename
a netdev, the name is replaced in the kernel, so we add
the changed name to the db to match with the remove event.
NOTE: The dev.d/ scripts still get the original name from the
hotplug call. Should we replace DEVPATH with the new name too?
o We now only add a device to the db, if we have successfully created
the main node or successfully renamed a netdev. This is the main part
of the patch, cause I needed to clean the retval passing trough all
the functions used for node creation.
o DEVNODE sounds a bit ugly for netdev's so I exported DEVNAME too.
Can we change the name?
o I've added a UDEV_NO_DEVD to possibly skip the script execution
and used it in udev-test.pl.
udevstart is the same horror now, if you have scripts with logging
statements in dev.d/ it takes minutes to finish, can we skip the
scripts here too?
o The get_device_type() function is changed to be more strict, cause
'udevinfo -a -p /block/' gets a class device for it and tries to
print the major/minor values.
o bugfix, the RESULT value has now a working newline removal and a test
for this case.
2004-04-01 11:12:57 +04:00
struct sysfs_class_device * class_dev ;
2003-10-21 09:48:44 +04:00
struct udevice dev ;
2004-04-01 12:59:58 +04:00
char devpath [ DEVPATH_SIZE ] ;
[PATCH] netdev - udevdb+dev.d changes
Here is a patch to change the netdev handling in the database and for
the dev.d/ calls. I applies on top of the udevd.patch, cause klibc has
no sysinfo().
o netdev's are also put into our database now. I want this for the
udevruler gui to get a list of all handled devices.
All devices in the db are stamped with the system uptime value at
the creation time. 'udevinfo -d' prints it.
o the DEVPATH value is the key for udevdb, but if we rename
a netdev, the name is replaced in the kernel, so we add
the changed name to the db to match with the remove event.
NOTE: The dev.d/ scripts still get the original name from the
hotplug call. Should we replace DEVPATH with the new name too?
o We now only add a device to the db, if we have successfully created
the main node or successfully renamed a netdev. This is the main part
of the patch, cause I needed to clean the retval passing trough all
the functions used for node creation.
o DEVNODE sounds a bit ugly for netdev's so I exported DEVNAME too.
Can we change the name?
o I've added a UDEV_NO_DEVD to possibly skip the script execution
and used it in udev-test.pl.
udevstart is the same horror now, if you have scripts with logging
statements in dev.d/ it takes minutes to finish, can we skip the
scripts here too?
o The get_device_type() function is changed to be more strict, cause
'udevinfo -a -p /block/' gets a class device for it and tries to
print the major/minor values.
o bugfix, the RESULT value has now a working newline removal and a test
for this case.
2004-04-01 11:12:57 +04:00
char * pos ;
int retval ;
2003-07-21 07:48:48 +04:00
2003-11-24 09:25:13 +03:00
memset ( & dev , 0x00 , sizeof ( dev ) ) ;
[PATCH] hmm, handle net devices with udev?
Hmm, Arndt Bergmann sent a patch like this one a few weeks ago and
I want to bring the question back, if we want to handle net device
naming with udev.
With this patch it is actually possible to specify something like this
in udev.rules:
KERNEL="dummy*", SYSFS{address}="00:00:00:00:00:00", SYSFS{features}="0x0", NAME="blind%n"
KERNEL="eth*", SYSFS{address}="00:0d:60:77:30:91", NAME="private"
and you will get:
[root@pim udev.kay]# cat /proc/net/dev
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 1500 30 0 0 0 0 0 0 1500 30 0 0 0 0 0 0
private: 278393 1114 0 0 0 0 0 0 153204 1468 0 0 0 0 0 0
sit0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
blind0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
The udevinfo program is also working:
[root@pim udev.kay]# ./udevinfo -a -p /sys/class/net/private
looking at class device '/sys/class/net/private':
SYSFS{addr_len}="6"
SYSFS{address}="00:0d:60:77:30:91"
SYSFS{broadcast}="ff:ff:ff:ff:ff:ff"
SYSFS{features}="0x3a9"
SYSFS{flags}="0x1003"
SYSFS{ifindex}="2"
SYSFS{iflink}="2"
SYSFS{mtu}="1500"
SYSFS{tx_queue_len}="1000"
SYSFS{type}="1"
follow the class device's "device"
looking at the device chain at '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:01.0':
BUS="pci"
ID="0000:02:01.0"
SYSFS{class}="0x020000"
SYSFS{detach_state}="0"
SYSFS{device}="0x101e"
SYSFS{irq}="11"
SYSFS{subsystem_device}="0x0549"
SYSFS{subsystem_vendor}="0x1014"
SYSFS{vendor}="0x8086"
The matching device will be renamed to the given name. The device name
will not be put into the udev database, cause the kernel renames the
device and the sysfs name disappears.
I like it, cause it plugs in nicely. We have all the naming features
and sysfs queries and walks inside of udev. The sysfs timing races
are already solved and the management tools are working for net devices
too. nameif can only match the MAC address now. udev can match any sysfs
value of the device tree the net device is connected to.
But right, net devices do not have device nodes :)
2004-03-25 10:19:39 +03:00
dev . type = get_device_type ( path , subsystem ) ;
switch ( dev . type ) {
case ' b ' :
case ' c ' :
retval = sleep_for_file ( path , " /dev " ) ;
break ;
case ' n ' :
retval = sleep_for_file ( path , " /address " ) ;
break ;
default :
dbg ( " unknown device type '%c' " , dev . type ) ;
[PATCH] netdev - udevdb+dev.d changes
Here is a patch to change the netdev handling in the database and for
the dev.d/ calls. I applies on top of the udevd.patch, cause klibc has
no sysinfo().
o netdev's are also put into our database now. I want this for the
udevruler gui to get a list of all handled devices.
All devices in the db are stamped with the system uptime value at
the creation time. 'udevinfo -d' prints it.
o the DEVPATH value is the key for udevdb, but if we rename
a netdev, the name is replaced in the kernel, so we add
the changed name to the db to match with the remove event.
NOTE: The dev.d/ scripts still get the original name from the
hotplug call. Should we replace DEVPATH with the new name too?
o We now only add a device to the db, if we have successfully created
the main node or successfully renamed a netdev. This is the main part
of the patch, cause I needed to clean the retval passing trough all
the functions used for node creation.
o DEVNODE sounds a bit ugly for netdev's so I exported DEVNAME too.
Can we change the name?
o I've added a UDEV_NO_DEVD to possibly skip the script execution
and used it in udev-test.pl.
udevstart is the same horror now, if you have scripts with logging
statements in dev.d/ it takes minutes to finish, can we skip the
scripts here too?
o The get_device_type() function is changed to be more strict, cause
'udevinfo -a -p /block/' gets a class device for it and tries to
print the major/minor values.
o bugfix, the RESULT value has now a working newline removal and a test
for this case.
2004-04-01 11:12:57 +04:00
return - 1 ;
[PATCH] hmm, handle net devices with udev?
Hmm, Arndt Bergmann sent a patch like this one a few weeks ago and
I want to bring the question back, if we want to handle net device
naming with udev.
With this patch it is actually possible to specify something like this
in udev.rules:
KERNEL="dummy*", SYSFS{address}="00:00:00:00:00:00", SYSFS{features}="0x0", NAME="blind%n"
KERNEL="eth*", SYSFS{address}="00:0d:60:77:30:91", NAME="private"
and you will get:
[root@pim udev.kay]# cat /proc/net/dev
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 1500 30 0 0 0 0 0 0 1500 30 0 0 0 0 0 0
private: 278393 1114 0 0 0 0 0 0 153204 1468 0 0 0 0 0 0
sit0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
blind0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
The udevinfo program is also working:
[root@pim udev.kay]# ./udevinfo -a -p /sys/class/net/private
looking at class device '/sys/class/net/private':
SYSFS{addr_len}="6"
SYSFS{address}="00:0d:60:77:30:91"
SYSFS{broadcast}="ff:ff:ff:ff:ff:ff"
SYSFS{features}="0x3a9"
SYSFS{flags}="0x1003"
SYSFS{ifindex}="2"
SYSFS{iflink}="2"
SYSFS{mtu}="1500"
SYSFS{tx_queue_len}="1000"
SYSFS{type}="1"
follow the class device's "device"
looking at the device chain at '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:01.0':
BUS="pci"
ID="0000:02:01.0"
SYSFS{class}="0x020000"
SYSFS{detach_state}="0"
SYSFS{device}="0x101e"
SYSFS{irq}="11"
SYSFS{subsystem_device}="0x0549"
SYSFS{subsystem_vendor}="0x1014"
SYSFS{vendor}="0x8086"
The matching device will be renamed to the given name. The device name
will not be put into the udev database, cause the kernel renames the
device and the sysfs name disappears.
I like it, cause it plugs in nicely. We have all the naming features
and sysfs queries and walks inside of udev. The sysfs timing races
are already solved and the management tools are working for net devices
too. nameif can only match the MAC address now. udev can match any sysfs
value of the device tree the net device is connected to.
But right, net devices do not have device nodes :)
2004-03-25 10:19:39 +03:00
}
2003-08-05 09:13:35 +04:00
2003-10-21 09:48:44 +04:00
class_dev = get_class_dev ( path ) ;
2003-07-21 07:48:48 +04:00
if ( class_dev = = NULL )
[PATCH] netdev - udevdb+dev.d changes
Here is a patch to change the netdev handling in the database and for
the dev.d/ calls. I applies on top of the udevd.patch, cause klibc has
no sysinfo().
o netdev's are also put into our database now. I want this for the
udevruler gui to get a list of all handled devices.
All devices in the db are stamped with the system uptime value at
the creation time. 'udevinfo -d' prints it.
o the DEVPATH value is the key for udevdb, but if we rename
a netdev, the name is replaced in the kernel, so we add
the changed name to the db to match with the remove event.
NOTE: The dev.d/ scripts still get the original name from the
hotplug call. Should we replace DEVPATH with the new name too?
o We now only add a device to the db, if we have successfully created
the main node or successfully renamed a netdev. This is the main part
of the patch, cause I needed to clean the retval passing trough all
the functions used for node creation.
o DEVNODE sounds a bit ugly for netdev's so I exported DEVNAME too.
Can we change the name?
o I've added a UDEV_NO_DEVD to possibly skip the script execution
and used it in udev-test.pl.
udevstart is the same horror now, if you have scripts with logging
statements in dev.d/ it takes minutes to finish, can we skip the
scripts here too?
o The get_device_type() function is changed to be more strict, cause
'udevinfo -a -p /block/' gets a class device for it and tries to
print the major/minor values.
o bugfix, the RESULT value has now a working newline removal and a test
for this case.
2004-04-01 11:12:57 +04:00
return - 1 ;
2003-07-21 07:48:48 +04:00
[PATCH] hmm, handle net devices with udev?
Hmm, Arndt Bergmann sent a patch like this one a few weeks ago and
I want to bring the question back, if we want to handle net device
naming with udev.
With this patch it is actually possible to specify something like this
in udev.rules:
KERNEL="dummy*", SYSFS{address}="00:00:00:00:00:00", SYSFS{features}="0x0", NAME="blind%n"
KERNEL="eth*", SYSFS{address}="00:0d:60:77:30:91", NAME="private"
and you will get:
[root@pim udev.kay]# cat /proc/net/dev
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 1500 30 0 0 0 0 0 0 1500 30 0 0 0 0 0 0
private: 278393 1114 0 0 0 0 0 0 153204 1468 0 0 0 0 0 0
sit0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
blind0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
The udevinfo program is also working:
[root@pim udev.kay]# ./udevinfo -a -p /sys/class/net/private
looking at class device '/sys/class/net/private':
SYSFS{addr_len}="6"
SYSFS{address}="00:0d:60:77:30:91"
SYSFS{broadcast}="ff:ff:ff:ff:ff:ff"
SYSFS{features}="0x3a9"
SYSFS{flags}="0x1003"
SYSFS{ifindex}="2"
SYSFS{iflink}="2"
SYSFS{mtu}="1500"
SYSFS{tx_queue_len}="1000"
SYSFS{type}="1"
follow the class device's "device"
looking at the device chain at '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:01.0':
BUS="pci"
ID="0000:02:01.0"
SYSFS{class}="0x020000"
SYSFS{detach_state}="0"
SYSFS{device}="0x101e"
SYSFS{irq}="11"
SYSFS{subsystem_device}="0x0549"
SYSFS{subsystem_vendor}="0x1014"
SYSFS{vendor}="0x8086"
The matching device will be renamed to the given name. The device name
will not be put into the udev database, cause the kernel renames the
device and the sysfs name disappears.
I like it, cause it plugs in nicely. We have all the naming features
and sysfs queries and walks inside of udev. The sysfs timing races
are already solved and the management tools are working for net devices
too. nameif can only match the MAC address now. udev can match any sysfs
value of the device tree the net device is connected to.
But right, net devices do not have device nodes :)
2004-03-25 10:19:39 +03:00
if ( dev . type = = ' b ' | | dev . type = = ' c ' ) {
retval = get_major_minor ( class_dev , & dev ) ;
if ( retval ! = 0 ) {
dbg ( " get_major_minor failed " ) ;
goto exit ;
}
2003-07-21 07:48:48 +04:00
}
[PATCH] netdev - udevdb+dev.d changes
Here is a patch to change the netdev handling in the database and for
the dev.d/ calls. I applies on top of the udevd.patch, cause klibc has
no sysinfo().
o netdev's are also put into our database now. I want this for the
udevruler gui to get a list of all handled devices.
All devices in the db are stamped with the system uptime value at
the creation time. 'udevinfo -d' prints it.
o the DEVPATH value is the key for udevdb, but if we rename
a netdev, the name is replaced in the kernel, so we add
the changed name to the db to match with the remove event.
NOTE: The dev.d/ scripts still get the original name from the
hotplug call. Should we replace DEVPATH with the new name too?
o We now only add a device to the db, if we have successfully created
the main node or successfully renamed a netdev. This is the main part
of the patch, cause I needed to clean the retval passing trough all
the functions used for node creation.
o DEVNODE sounds a bit ugly for netdev's so I exported DEVNAME too.
Can we change the name?
o I've added a UDEV_NO_DEVD to possibly skip the script execution
and used it in udev-test.pl.
udevstart is the same horror now, if you have scripts with logging
statements in dev.d/ it takes minutes to finish, can we skip the
scripts here too?
o The get_device_type() function is changed to be more strict, cause
'udevinfo -a -p /block/' gets a class device for it and tries to
print the major/minor values.
o bugfix, the RESULT value has now a working newline removal and a test
for this case.
2004-04-01 11:12:57 +04:00
if ( namedev_name_device ( class_dev , & dev ) ! = 0 )
2003-11-14 07:08:10 +03:00
goto exit ;
2003-11-25 09:27:17 +03:00
dbg ( " name='%s' " , dev . name ) ;
[PATCH] netdev - udevdb+dev.d changes
Here is a patch to change the netdev handling in the database and for
the dev.d/ calls. I applies on top of the udevd.patch, cause klibc has
no sysinfo().
o netdev's are also put into our database now. I want this for the
udevruler gui to get a list of all handled devices.
All devices in the db are stamped with the system uptime value at
the creation time. 'udevinfo -d' prints it.
o the DEVPATH value is the key for udevdb, but if we rename
a netdev, the name is replaced in the kernel, so we add
the changed name to the db to match with the remove event.
NOTE: The dev.d/ scripts still get the original name from the
hotplug call. Should we replace DEVPATH with the new name too?
o We now only add a device to the db, if we have successfully created
the main node or successfully renamed a netdev. This is the main part
of the patch, cause I needed to clean the retval passing trough all
the functions used for node creation.
o DEVNODE sounds a bit ugly for netdev's so I exported DEVNAME too.
Can we change the name?
o I've added a UDEV_NO_DEVD to possibly skip the script execution
and used it in udev-test.pl.
udevstart is the same horror now, if you have scripts with logging
statements in dev.d/ it takes minutes to finish, can we skip the
scripts here too?
o The get_device_type() function is changed to be more strict, cause
'udevinfo -a -p /block/' gets a class device for it and tries to
print the major/minor values.
o bugfix, the RESULT value has now a working newline removal and a test
for this case.
2004-04-01 11:12:57 +04:00
[PATCH] hmm, handle net devices with udev?
Hmm, Arndt Bergmann sent a patch like this one a few weeks ago and
I want to bring the question back, if we want to handle net device
naming with udev.
With this patch it is actually possible to specify something like this
in udev.rules:
KERNEL="dummy*", SYSFS{address}="00:00:00:00:00:00", SYSFS{features}="0x0", NAME="blind%n"
KERNEL="eth*", SYSFS{address}="00:0d:60:77:30:91", NAME="private"
and you will get:
[root@pim udev.kay]# cat /proc/net/dev
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 1500 30 0 0 0 0 0 0 1500 30 0 0 0 0 0 0
private: 278393 1114 0 0 0 0 0 0 153204 1468 0 0 0 0 0 0
sit0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
blind0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
The udevinfo program is also working:
[root@pim udev.kay]# ./udevinfo -a -p /sys/class/net/private
looking at class device '/sys/class/net/private':
SYSFS{addr_len}="6"
SYSFS{address}="00:0d:60:77:30:91"
SYSFS{broadcast}="ff:ff:ff:ff:ff:ff"
SYSFS{features}="0x3a9"
SYSFS{flags}="0x1003"
SYSFS{ifindex}="2"
SYSFS{iflink}="2"
SYSFS{mtu}="1500"
SYSFS{tx_queue_len}="1000"
SYSFS{type}="1"
follow the class device's "device"
looking at the device chain at '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:01.0':
BUS="pci"
ID="0000:02:01.0"
SYSFS{class}="0x020000"
SYSFS{detach_state}="0"
SYSFS{device}="0x101e"
SYSFS{irq}="11"
SYSFS{subsystem_device}="0x0549"
SYSFS{subsystem_vendor}="0x1014"
SYSFS{vendor}="0x8086"
The matching device will be renamed to the given name. The device name
will not be put into the udev database, cause the kernel renames the
device and the sysfs name disappears.
I like it, cause it plugs in nicely. We have all the naming features
and sysfs queries and walks inside of udev. The sysfs timing races
are already solved and the management tools are working for net devices
too. nameif can only match the MAC address now. udev can match any sysfs
value of the device tree the net device is connected to.
But right, net devices do not have device nodes :)
2004-03-25 10:19:39 +03:00
switch ( dev . type ) {
case ' b ' :
case ' c ' :
retval = create_node ( & dev , fake ) ;
2004-04-02 09:52:46 +04:00
if ( retval ! = 0 )
[PATCH] netdev - udevdb+dev.d changes
Here is a patch to change the netdev handling in the database and for
the dev.d/ calls. I applies on top of the udevd.patch, cause klibc has
no sysinfo().
o netdev's are also put into our database now. I want this for the
udevruler gui to get a list of all handled devices.
All devices in the db are stamped with the system uptime value at
the creation time. 'udevinfo -d' prints it.
o the DEVPATH value is the key for udevdb, but if we rename
a netdev, the name is replaced in the kernel, so we add
the changed name to the db to match with the remove event.
NOTE: The dev.d/ scripts still get the original name from the
hotplug call. Should we replace DEVPATH with the new name too?
o We now only add a device to the db, if we have successfully created
the main node or successfully renamed a netdev. This is the main part
of the patch, cause I needed to clean the retval passing trough all
the functions used for node creation.
o DEVNODE sounds a bit ugly for netdev's so I exported DEVNAME too.
Can we change the name?
o I've added a UDEV_NO_DEVD to possibly skip the script execution
and used it in udev-test.pl.
udevstart is the same horror now, if you have scripts with logging
statements in dev.d/ it takes minutes to finish, can we skip the
scripts here too?
o The get_device_type() function is changed to be more strict, cause
'udevinfo -a -p /block/' gets a class device for it and tries to
print the major/minor values.
o bugfix, the RESULT value has now a working newline removal and a test
for this case.
2004-04-01 11:12:57 +04:00
goto exit ;
2004-04-02 09:52:46 +04:00
if ( ( ! fake ) & & ( udevdb_add_dev ( path , & dev ) ! = 0 ) )
[PATCH] netdev - udevdb+dev.d changes
Here is a patch to change the netdev handling in the database and for
the dev.d/ calls. I applies on top of the udevd.patch, cause klibc has
no sysinfo().
o netdev's are also put into our database now. I want this for the
udevruler gui to get a list of all handled devices.
All devices in the db are stamped with the system uptime value at
the creation time. 'udevinfo -d' prints it.
o the DEVPATH value is the key for udevdb, but if we rename
a netdev, the name is replaced in the kernel, so we add
the changed name to the db to match with the remove event.
NOTE: The dev.d/ scripts still get the original name from the
hotplug call. Should we replace DEVPATH with the new name too?
o We now only add a device to the db, if we have successfully created
the main node or successfully renamed a netdev. This is the main part
of the patch, cause I needed to clean the retval passing trough all
the functions used for node creation.
o DEVNODE sounds a bit ugly for netdev's so I exported DEVNAME too.
Can we change the name?
o I've added a UDEV_NO_DEVD to possibly skip the script execution
and used it in udev-test.pl.
udevstart is the same horror now, if you have scripts with logging
statements in dev.d/ it takes minutes to finish, can we skip the
scripts here too?
o The get_device_type() function is changed to be more strict, cause
'udevinfo -a -p /block/' gets a class device for it and tries to
print the major/minor values.
o bugfix, the RESULT value has now a working newline removal and a test
for this case.
2004-04-01 11:12:57 +04:00
dbg ( " udevdb_add_dev failed, but we are going to try "
" to create the node anyway. But remove might not "
" work properly for this device. " ) ;
2004-04-01 12:59:58 +04:00
dev_d_send ( & dev , subsystem , path ) ;
[PATCH] hmm, handle net devices with udev?
Hmm, Arndt Bergmann sent a patch like this one a few weeks ago and
I want to bring the question back, if we want to handle net device
naming with udev.
With this patch it is actually possible to specify something like this
in udev.rules:
KERNEL="dummy*", SYSFS{address}="00:00:00:00:00:00", SYSFS{features}="0x0", NAME="blind%n"
KERNEL="eth*", SYSFS{address}="00:0d:60:77:30:91", NAME="private"
and you will get:
[root@pim udev.kay]# cat /proc/net/dev
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 1500 30 0 0 0 0 0 0 1500 30 0 0 0 0 0 0
private: 278393 1114 0 0 0 0 0 0 153204 1468 0 0 0 0 0 0
sit0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
blind0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
The udevinfo program is also working:
[root@pim udev.kay]# ./udevinfo -a -p /sys/class/net/private
looking at class device '/sys/class/net/private':
SYSFS{addr_len}="6"
SYSFS{address}="00:0d:60:77:30:91"
SYSFS{broadcast}="ff:ff:ff:ff:ff:ff"
SYSFS{features}="0x3a9"
SYSFS{flags}="0x1003"
SYSFS{ifindex}="2"
SYSFS{iflink}="2"
SYSFS{mtu}="1500"
SYSFS{tx_queue_len}="1000"
SYSFS{type}="1"
follow the class device's "device"
looking at the device chain at '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:01.0':
BUS="pci"
ID="0000:02:01.0"
SYSFS{class}="0x020000"
SYSFS{detach_state}="0"
SYSFS{device}="0x101e"
SYSFS{irq}="11"
SYSFS{subsystem_device}="0x0549"
SYSFS{subsystem_vendor}="0x1014"
SYSFS{vendor}="0x8086"
The matching device will be renamed to the given name. The device name
will not be put into the udev database, cause the kernel renames the
device and the sysfs name disappears.
I like it, cause it plugs in nicely. We have all the naming features
and sysfs queries and walks inside of udev. The sysfs timing races
are already solved and the management tools are working for net devices
too. nameif can only match the MAC address now. udev can match any sysfs
value of the device tree the net device is connected to.
But right, net devices do not have device nodes :)
2004-03-25 10:19:39 +03:00
break ;
case ' n ' :
2004-04-09 05:49:27 +04:00
strfieldcpy ( devpath , path ) ;
[PATCH] netdev - udevdb+dev.d changes
Here is a patch to change the netdev handling in the database and for
the dev.d/ calls. I applies on top of the udevd.patch, cause klibc has
no sysinfo().
o netdev's are also put into our database now. I want this for the
udevruler gui to get a list of all handled devices.
All devices in the db are stamped with the system uptime value at
the creation time. 'udevinfo -d' prints it.
o the DEVPATH value is the key for udevdb, but if we rename
a netdev, the name is replaced in the kernel, so we add
the changed name to the db to match with the remove event.
NOTE: The dev.d/ scripts still get the original name from the
hotplug call. Should we replace DEVPATH with the new name too?
o We now only add a device to the db, if we have successfully created
the main node or successfully renamed a netdev. This is the main part
of the patch, cause I needed to clean the retval passing trough all
the functions used for node creation.
o DEVNODE sounds a bit ugly for netdev's so I exported DEVNAME too.
Can we change the name?
o I've added a UDEV_NO_DEVD to possibly skip the script execution
and used it in udev-test.pl.
udevstart is the same horror now, if you have scripts with logging
statements in dev.d/ it takes minutes to finish, can we skip the
scripts here too?
o The get_device_type() function is changed to be more strict, cause
'udevinfo -a -p /block/' gets a class device for it and tries to
print the major/minor values.
o bugfix, the RESULT value has now a working newline removal and a test
for this case.
2004-04-01 11:12:57 +04:00
if ( strcmp ( dev . name , dev . kernel_name ) ! = 0 ) {
retval = rename_net_if ( & dev , fake ) ;
2004-04-02 09:52:46 +04:00
if ( retval ! = 0 )
[PATCH] netdev - udevdb+dev.d changes
Here is a patch to change the netdev handling in the database and for
the dev.d/ calls. I applies on top of the udevd.patch, cause klibc has
no sysinfo().
o netdev's are also put into our database now. I want this for the
udevruler gui to get a list of all handled devices.
All devices in the db are stamped with the system uptime value at
the creation time. 'udevinfo -d' prints it.
o the DEVPATH value is the key for udevdb, but if we rename
a netdev, the name is replaced in the kernel, so we add
the changed name to the db to match with the remove event.
NOTE: The dev.d/ scripts still get the original name from the
hotplug call. Should we replace DEVPATH with the new name too?
o We now only add a device to the db, if we have successfully created
the main node or successfully renamed a netdev. This is the main part
of the patch, cause I needed to clean the retval passing trough all
the functions used for node creation.
o DEVNODE sounds a bit ugly for netdev's so I exported DEVNAME too.
Can we change the name?
o I've added a UDEV_NO_DEVD to possibly skip the script execution
and used it in udev-test.pl.
udevstart is the same horror now, if you have scripts with logging
statements in dev.d/ it takes minutes to finish, can we skip the
scripts here too?
o The get_device_type() function is changed to be more strict, cause
'udevinfo -a -p /block/' gets a class device for it and tries to
print the major/minor values.
o bugfix, the RESULT value has now a working newline removal and a test
for this case.
2004-04-01 11:12:57 +04:00
goto exit ;
/* netif's are keyed with the configured name, cause
* the original kernel name sleeps with the fishes
*/
2004-04-01 12:59:58 +04:00
pos = strrchr ( devpath , ' / ' ) ;
[PATCH] netdev - udevdb+dev.d changes
Here is a patch to change the netdev handling in the database and for
the dev.d/ calls. I applies on top of the udevd.patch, cause klibc has
no sysinfo().
o netdev's are also put into our database now. I want this for the
udevruler gui to get a list of all handled devices.
All devices in the db are stamped with the system uptime value at
the creation time. 'udevinfo -d' prints it.
o the DEVPATH value is the key for udevdb, but if we rename
a netdev, the name is replaced in the kernel, so we add
the changed name to the db to match with the remove event.
NOTE: The dev.d/ scripts still get the original name from the
hotplug call. Should we replace DEVPATH with the new name too?
o We now only add a device to the db, if we have successfully created
the main node or successfully renamed a netdev. This is the main part
of the patch, cause I needed to clean the retval passing trough all
the functions used for node creation.
o DEVNODE sounds a bit ugly for netdev's so I exported DEVNAME too.
Can we change the name?
o I've added a UDEV_NO_DEVD to possibly skip the script execution
and used it in udev-test.pl.
udevstart is the same horror now, if you have scripts with logging
statements in dev.d/ it takes minutes to finish, can we skip the
scripts here too?
o The get_device_type() function is changed to be more strict, cause
'udevinfo -a -p /block/' gets a class device for it and tries to
print the major/minor values.
o bugfix, the RESULT value has now a working newline removal and a test
for this case.
2004-04-01 11:12:57 +04:00
if ( pos ! = NULL ) {
pos [ 1 ] = ' \0 ' ;
2004-04-01 12:59:58 +04:00
strfieldcat ( devpath , dev . name ) ;
[PATCH] netdev - udevdb+dev.d changes
Here is a patch to change the netdev handling in the database and for
the dev.d/ calls. I applies on top of the udevd.patch, cause klibc has
no sysinfo().
o netdev's are also put into our database now. I want this for the
udevruler gui to get a list of all handled devices.
All devices in the db are stamped with the system uptime value at
the creation time. 'udevinfo -d' prints it.
o the DEVPATH value is the key for udevdb, but if we rename
a netdev, the name is replaced in the kernel, so we add
the changed name to the db to match with the remove event.
NOTE: The dev.d/ scripts still get the original name from the
hotplug call. Should we replace DEVPATH with the new name too?
o We now only add a device to the db, if we have successfully created
the main node or successfully renamed a netdev. This is the main part
of the patch, cause I needed to clean the retval passing trough all
the functions used for node creation.
o DEVNODE sounds a bit ugly for netdev's so I exported DEVNAME too.
Can we change the name?
o I've added a UDEV_NO_DEVD to possibly skip the script execution
and used it in udev-test.pl.
udevstart is the same horror now, if you have scripts with logging
statements in dev.d/ it takes minutes to finish, can we skip the
scripts here too?
o The get_device_type() function is changed to be more strict, cause
'udevinfo -a -p /block/' gets a class device for it and tries to
print the major/minor values.
o bugfix, the RESULT value has now a working newline removal and a test
for this case.
2004-04-01 11:12:57 +04:00
}
}
2004-04-02 09:52:46 +04:00
if ( ( ! fake ) & & ( udevdb_add_dev ( devpath , & dev ) ! = 0 ) )
[PATCH] netdev - udevdb+dev.d changes
Here is a patch to change the netdev handling in the database and for
the dev.d/ calls. I applies on top of the udevd.patch, cause klibc has
no sysinfo().
o netdev's are also put into our database now. I want this for the
udevruler gui to get a list of all handled devices.
All devices in the db are stamped with the system uptime value at
the creation time. 'udevinfo -d' prints it.
o the DEVPATH value is the key for udevdb, but if we rename
a netdev, the name is replaced in the kernel, so we add
the changed name to the db to match with the remove event.
NOTE: The dev.d/ scripts still get the original name from the
hotplug call. Should we replace DEVPATH with the new name too?
o We now only add a device to the db, if we have successfully created
the main node or successfully renamed a netdev. This is the main part
of the patch, cause I needed to clean the retval passing trough all
the functions used for node creation.
o DEVNODE sounds a bit ugly for netdev's so I exported DEVNAME too.
Can we change the name?
o I've added a UDEV_NO_DEVD to possibly skip the script execution
and used it in udev-test.pl.
udevstart is the same horror now, if you have scripts with logging
statements in dev.d/ it takes minutes to finish, can we skip the
scripts here too?
o The get_device_type() function is changed to be more strict, cause
'udevinfo -a -p /block/' gets a class device for it and tries to
print the major/minor values.
o bugfix, the RESULT value has now a working newline removal and a test
for this case.
2004-04-01 11:12:57 +04:00
dbg ( " udevdb_add_dev failed " ) ;
2004-04-01 12:59:58 +04:00
dev_d_send ( & dev , subsystem , devpath ) ;
[PATCH] hmm, handle net devices with udev?
Hmm, Arndt Bergmann sent a patch like this one a few weeks ago and
I want to bring the question back, if we want to handle net device
naming with udev.
With this patch it is actually possible to specify something like this
in udev.rules:
KERNEL="dummy*", SYSFS{address}="00:00:00:00:00:00", SYSFS{features}="0x0", NAME="blind%n"
KERNEL="eth*", SYSFS{address}="00:0d:60:77:30:91", NAME="private"
and you will get:
[root@pim udev.kay]# cat /proc/net/dev
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 1500 30 0 0 0 0 0 0 1500 30 0 0 0 0 0 0
private: 278393 1114 0 0 0 0 0 0 153204 1468 0 0 0 0 0 0
sit0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
blind0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
The udevinfo program is also working:
[root@pim udev.kay]# ./udevinfo -a -p /sys/class/net/private
looking at class device '/sys/class/net/private':
SYSFS{addr_len}="6"
SYSFS{address}="00:0d:60:77:30:91"
SYSFS{broadcast}="ff:ff:ff:ff:ff:ff"
SYSFS{features}="0x3a9"
SYSFS{flags}="0x1003"
SYSFS{ifindex}="2"
SYSFS{iflink}="2"
SYSFS{mtu}="1500"
SYSFS{tx_queue_len}="1000"
SYSFS{type}="1"
follow the class device's "device"
looking at the device chain at '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:01.0':
BUS="pci"
ID="0000:02:01.0"
SYSFS{class}="0x020000"
SYSFS{detach_state}="0"
SYSFS{device}="0x101e"
SYSFS{irq}="11"
SYSFS{subsystem_device}="0x0549"
SYSFS{subsystem_vendor}="0x1014"
SYSFS{vendor}="0x8086"
The matching device will be renamed to the given name. The device name
will not be put into the udev database, cause the kernel renames the
device and the sysfs name disappears.
I like it, cause it plugs in nicely. We have all the naming features
and sysfs queries and walks inside of udev. The sysfs timing races
are already solved and the management tools are working for net devices
too. nameif can only match the MAC address now. udev can match any sysfs
value of the device tree the net device is connected to.
But right, net devices do not have device nodes :)
2004-03-25 10:19:39 +03:00
break ;
}
2003-07-21 07:48:48 +04:00
exit :
[PATCH] netdev - udevdb+dev.d changes
Here is a patch to change the netdev handling in the database and for
the dev.d/ calls. I applies on top of the udevd.patch, cause klibc has
no sysinfo().
o netdev's are also put into our database now. I want this for the
udevruler gui to get a list of all handled devices.
All devices in the db are stamped with the system uptime value at
the creation time. 'udevinfo -d' prints it.
o the DEVPATH value is the key for udevdb, but if we rename
a netdev, the name is replaced in the kernel, so we add
the changed name to the db to match with the remove event.
NOTE: The dev.d/ scripts still get the original name from the
hotplug call. Should we replace DEVPATH with the new name too?
o We now only add a device to the db, if we have successfully created
the main node or successfully renamed a netdev. This is the main part
of the patch, cause I needed to clean the retval passing trough all
the functions used for node creation.
o DEVNODE sounds a bit ugly for netdev's so I exported DEVNAME too.
Can we change the name?
o I've added a UDEV_NO_DEVD to possibly skip the script execution
and used it in udev-test.pl.
udevstart is the same horror now, if you have scripts with logging
statements in dev.d/ it takes minutes to finish, can we skip the
scripts here too?
o The get_device_type() function is changed to be more strict, cause
'udevinfo -a -p /block/' gets a class device for it and tries to
print the major/minor values.
o bugfix, the RESULT value has now a working newline removal and a test
for this case.
2004-04-01 11:12:57 +04:00
sysfs_close_class_device ( class_dev ) ;
2003-11-14 07:08:10 +03:00
2003-07-21 07:48:48 +04:00
return retval ;
}