[PATCH] experimental CALLOUT script for devfs ide node creation with cd, disc, part
Here is a experimental CALLOUT script for udev to create devfs nodes
for IDE-devices. Not that I need these, I just wanted to see if it works :)
The script is really stupid, no error handling, nothing more than
absolutely needed. The rule uses the 'k' format char of the previous
patch. The %D is not used, so the user can have disc or disk :)
this single line:
CALLOUT, BUS="ide", PROGRAM="/etc/udev/ide-devfs.sh %k %b %n", ID="hd*", NAME="%1c", SYMLINK="%2c"
creates the following on my machine with two hard disks, one DVD and a PCMCIA-compact-flash inserted:
/udev
|-- hda
|-- hda1
|-- hda2
|-- hda4
|-- hdb
|-- hdb1
|-- hdc
|-- hde
|-- hde1
`-- ide
|-- host0
| |-- bus0
| | |-- target0
| | | `-- lun0
| | | |-- disc -> ../../../../../hda
| | | |-- part1 -> ../../../../../hda1
| | | |-- part2 -> ../../../../../hda2
| | | `-- part4 -> ../../../../../hda4
| | `-- target1
| | `-- lun0
| | |-- disc -> ../../../../../hdb
| | `-- part1 -> ../../../../../hdb1
| `-- bus1
| `-- target0
| `-- lun0
| `-- cd -> ../../../../../hdc
`-- host2
`-- bus0
`-- target0
`-- lun0
|-- disc -> ../../../../../hde
`-- part1 -> ../../../../../hde1
2003-12-23 07:34:53 +03:00
#!/bin/sh
2004-01-14 05:31:18 +03:00
# udev external PROGRAM script
[PATCH] experimental CALLOUT script for devfs ide node creation with cd, disc, part
Here is a experimental CALLOUT script for udev to create devfs nodes
for IDE-devices. Not that I need these, I just wanted to see if it works :)
The script is really stupid, no error handling, nothing more than
absolutely needed. The rule uses the 'k' format char of the previous
patch. The %D is not used, so the user can have disc or disk :)
this single line:
CALLOUT, BUS="ide", PROGRAM="/etc/udev/ide-devfs.sh %k %b %n", ID="hd*", NAME="%1c", SYMLINK="%2c"
creates the following on my machine with two hard disks, one DVD and a PCMCIA-compact-flash inserted:
/udev
|-- hda
|-- hda1
|-- hda2
|-- hda4
|-- hdb
|-- hdb1
|-- hdc
|-- hde
|-- hde1
`-- ide
|-- host0
| |-- bus0
| | |-- target0
| | | `-- lun0
| | | |-- disc -> ../../../../../hda
| | | |-- part1 -> ../../../../../hda1
| | | |-- part2 -> ../../../../../hda2
| | | `-- part4 -> ../../../../../hda4
| | `-- target1
| | `-- lun0
| | |-- disc -> ../../../../../hdb
| | `-- part1 -> ../../../../../hdb1
| `-- bus1
| `-- target0
| `-- lun0
| `-- cd -> ../../../../../hdc
`-- host2
`-- bus0
`-- target0
`-- lun0
|-- disc -> ../../../../../hde
`-- part1 -> ../../../../../hde1
2003-12-23 07:34:53 +03:00
# return devfs-names for ide-devices
2004-02-17 12:29:03 +03:00
# BUS="ide", KERNEL="hd*", PROGRAM="/etc/udev/ide-devfs.sh %k %b %n", NAME="%k", SYMLINK="%c{1} %c{2}"
[PATCH] experimental CALLOUT script for devfs ide node creation with cd, disc, part
Here is a experimental CALLOUT script for udev to create devfs nodes
for IDE-devices. Not that I need these, I just wanted to see if it works :)
The script is really stupid, no error handling, nothing more than
absolutely needed. The rule uses the 'k' format char of the previous
patch. The %D is not used, so the user can have disc or disk :)
this single line:
CALLOUT, BUS="ide", PROGRAM="/etc/udev/ide-devfs.sh %k %b %n", ID="hd*", NAME="%1c", SYMLINK="%2c"
creates the following on my machine with two hard disks, one DVD and a PCMCIA-compact-flash inserted:
/udev
|-- hda
|-- hda1
|-- hda2
|-- hda4
|-- hdb
|-- hdb1
|-- hdc
|-- hde
|-- hde1
`-- ide
|-- host0
| |-- bus0
| | |-- target0
| | | `-- lun0
| | | |-- disc -> ../../../../../hda
| | | |-- part1 -> ../../../../../hda1
| | | |-- part2 -> ../../../../../hda2
| | | `-- part4 -> ../../../../../hda4
| | `-- target1
| | `-- lun0
| | |-- disc -> ../../../../../hdb
| | `-- part1 -> ../../../../../hdb1
| `-- bus1
| `-- target0
| `-- lun0
| `-- cd -> ../../../../../hdc
`-- host2
`-- bus0
`-- target0
`-- lun0
|-- disc -> ../../../../../hde
`-- part1 -> ../../../../../hde1
2003-12-23 07:34:53 +03:00
2003-12-30 12:08:00 +03:00
HOST = " ${ 2 % \. [0-9] } "
TARGET = " ${ 2 #[0-9] \. } "
[PATCH] experimental CALLOUT script for devfs ide node creation with cd, disc, part
Here is a experimental CALLOUT script for udev to create devfs nodes
for IDE-devices. Not that I need these, I just wanted to see if it works :)
The script is really stupid, no error handling, nothing more than
absolutely needed. The rule uses the 'k' format char of the previous
patch. The %D is not used, so the user can have disc or disk :)
this single line:
CALLOUT, BUS="ide", PROGRAM="/etc/udev/ide-devfs.sh %k %b %n", ID="hd*", NAME="%1c", SYMLINK="%2c"
creates the following on my machine with two hard disks, one DVD and a PCMCIA-compact-flash inserted:
/udev
|-- hda
|-- hda1
|-- hda2
|-- hda4
|-- hdb
|-- hdb1
|-- hdc
|-- hde
|-- hde1
`-- ide
|-- host0
| |-- bus0
| | |-- target0
| | | `-- lun0
| | | |-- disc -> ../../../../../hda
| | | |-- part1 -> ../../../../../hda1
| | | |-- part2 -> ../../../../../hda2
| | | `-- part4 -> ../../../../../hda4
| | `-- target1
| | `-- lun0
| | |-- disc -> ../../../../../hdb
| | `-- part1 -> ../../../../../hdb1
| `-- bus1
| `-- target0
| `-- lun0
| `-- cd -> ../../../../../hdc
`-- host2
`-- bus0
`-- target0
`-- lun0
|-- disc -> ../../../../../hde
`-- part1 -> ../../../../../hde1
2003-12-23 07:34:53 +03:00
2003-12-30 12:08:00 +03:00
if [ -z " ${ HOST #[13579] } " ] ; then
2004-03-02 09:34:08 +03:00
HOST = $(( ${ HOST } - 1 ))
[PATCH] experimental CALLOUT script for devfs ide node creation with cd, disc, part
Here is a experimental CALLOUT script for udev to create devfs nodes
for IDE-devices. Not that I need these, I just wanted to see if it works :)
The script is really stupid, no error handling, nothing more than
absolutely needed. The rule uses the 'k' format char of the previous
patch. The %D is not used, so the user can have disc or disk :)
this single line:
CALLOUT, BUS="ide", PROGRAM="/etc/udev/ide-devfs.sh %k %b %n", ID="hd*", NAME="%1c", SYMLINK="%2c"
creates the following on my machine with two hard disks, one DVD and a PCMCIA-compact-flash inserted:
/udev
|-- hda
|-- hda1
|-- hda2
|-- hda4
|-- hdb
|-- hdb1
|-- hdc
|-- hde
|-- hde1
`-- ide
|-- host0
| |-- bus0
| | |-- target0
| | | `-- lun0
| | | |-- disc -> ../../../../../hda
| | | |-- part1 -> ../../../../../hda1
| | | |-- part2 -> ../../../../../hda2
| | | `-- part4 -> ../../../../../hda4
| | `-- target1
| | `-- lun0
| | |-- disc -> ../../../../../hdb
| | `-- part1 -> ../../../../../hdb1
| `-- bus1
| `-- target0
| `-- lun0
| `-- cd -> ../../../../../hdc
`-- host2
`-- bus0
`-- target0
`-- lun0
|-- disc -> ../../../../../hde
`-- part1 -> ../../../../../hde1
2003-12-23 07:34:53 +03:00
BUS = "1"
else
BUS = "0"
fi
2003-12-30 12:08:00 +03:00
get_dev_number( ) {
[PATCH] Minor POSIX-fixes for udev
The attached patch contains a few patches against udev, to remove
use of various XSI:isms and bash:isms, and to change two scripts form
/bin/bash to /bin/sh. None of the bash-scripts in test/ uses any
bash-specific functions as far as I know, but I didn't touch them since
they aren't used runtime.
Rationale:
* Both of the /bin/bash-scripts are totally free from bashisms, hence they
don't need to be /bin/bash; using /bin/sh instead helps (mainly)
embedded-people
* local and source are bash:isms (well, they exist in several other
shells as well, but they aren't part of POSIX or any of its extensions)
* -a in tests is an XSI-extension, not part of strict POSIX, and is
easily replaced by &&
| http://www.opengroup.org/onlinepubs/009695399/utilities/test.html
* Use of fgrep is deprecated in POSIX in favour of grep -F (though fgrep
will remain in use for a long time...)
| http://www.opengroup.org/onlinepubs/009695399/utilities/grep.html
The fgrep-change isn't really necessary, since fgrep can always be
implemented as a shell-script, but the rest of the changes would really
be appreciated.
2004-08-11 12:03:03 +04:00
num = 0
DRIVE = " ${ 1 %%[0-9]* } "
2003-12-30 12:08:00 +03:00
for x in /proc/ide/*/media; do
if [ -e " ${ x } " ] ; then
[PATCH] Minor POSIX-fixes for udev
The attached patch contains a few patches against udev, to remove
use of various XSI:isms and bash:isms, and to change two scripts form
/bin/bash to /bin/sh. None of the bash-scripts in test/ uses any
bash-specific functions as far as I know, but I didn't touch them since
they aren't used runtime.
Rationale:
* Both of the /bin/bash-scripts are totally free from bashisms, hence they
don't need to be /bin/bash; using /bin/sh instead helps (mainly)
embedded-people
* local and source are bash:isms (well, they exist in several other
shells as well, but they aren't part of POSIX or any of its extensions)
* -a in tests is an XSI-extension, not part of strict POSIX, and is
easily replaced by &&
| http://www.opengroup.org/onlinepubs/009695399/utilities/test.html
* Use of fgrep is deprecated in POSIX in favour of grep -F (though fgrep
will remain in use for a long time...)
| http://www.opengroup.org/onlinepubs/009695399/utilities/grep.html
The fgrep-change isn't really necessary, since fgrep can always be
implemented as a shell-script, but the rest of the changes would really
be appreciated.
2004-08-11 12:03:03 +04:00
lMEDIA = ` cat ${ x } `
if [ " ${ lMEDIA } " = " $2 " ] ; then
2004-03-02 09:34:08 +03:00
num = $(( ${ num } + 1 ))
2003-12-30 12:08:00 +03:00
fi
if [ " ${ x } " = " /proc/ide/ ${ DRIVE } /media " ] ; then
break
fi
fi
done
2004-03-02 09:34:08 +03:00
echo $(( ${ num } - 1 ))
2003-12-30 12:08:00 +03:00
}
[PATCH] Minor POSIX-fixes for udev
The attached patch contains a few patches against udev, to remove
use of various XSI:isms and bash:isms, and to change two scripts form
/bin/bash to /bin/sh. None of the bash-scripts in test/ uses any
bash-specific functions as far as I know, but I didn't touch them since
they aren't used runtime.
Rationale:
* Both of the /bin/bash-scripts are totally free from bashisms, hence they
don't need to be /bin/bash; using /bin/sh instead helps (mainly)
embedded-people
* local and source are bash:isms (well, they exist in several other
shells as well, but they aren't part of POSIX or any of its extensions)
* -a in tests is an XSI-extension, not part of strict POSIX, and is
easily replaced by &&
| http://www.opengroup.org/onlinepubs/009695399/utilities/test.html
* Use of fgrep is deprecated in POSIX in favour of grep -F (though fgrep
will remain in use for a long time...)
| http://www.opengroup.org/onlinepubs/009695399/utilities/grep.html
The fgrep-change isn't really necessary, since fgrep can always be
implemented as a shell-script, but the rest of the changes would really
be appreciated.
2004-08-11 12:03:03 +04:00
if [ -z " $3 " ] && [ -f /proc/ide/${ 1 } /media ] ; then
2003-12-30 12:08:00 +03:00
MEDIA = ` cat /proc/ide/${ 1 } /media`
if [ " ${ MEDIA } " = "cdrom" ] ; then
2004-01-14 05:34:38 +03:00
echo ide/host${ HOST } /bus${ BUS } /target${ TARGET } /lun0/cd cdroms/cdrom` get_dev_number $1 cdrom`
2004-04-17 10:58:02 +04:00
elif [ " ${ MEDIA } " = "floppy" ] ; then
echo ide/host${ HOST } /bus${ BUS } /target${ TARGET } /lun0/disc floppies/floppy` get_dev_number $1 floppy` /disc
2003-12-30 12:08:00 +03:00
elif [ " ${ MEDIA } " = "disk" ] ; then
2004-01-14 05:34:38 +03:00
echo ide/host${ HOST } /bus${ BUS } /target${ TARGET } /lun0/disc discs/disc` get_dev_number $1 disk` /disc
[PATCH] experimental CALLOUT script for devfs ide node creation with cd, disc, part
Here is a experimental CALLOUT script for udev to create devfs nodes
for IDE-devices. Not that I need these, I just wanted to see if it works :)
The script is really stupid, no error handling, nothing more than
absolutely needed. The rule uses the 'k' format char of the previous
patch. The %D is not used, so the user can have disc or disk :)
this single line:
CALLOUT, BUS="ide", PROGRAM="/etc/udev/ide-devfs.sh %k %b %n", ID="hd*", NAME="%1c", SYMLINK="%2c"
creates the following on my machine with two hard disks, one DVD and a PCMCIA-compact-flash inserted:
/udev
|-- hda
|-- hda1
|-- hda2
|-- hda4
|-- hdb
|-- hdb1
|-- hdc
|-- hde
|-- hde1
`-- ide
|-- host0
| |-- bus0
| | |-- target0
| | | `-- lun0
| | | |-- disc -> ../../../../../hda
| | | |-- part1 -> ../../../../../hda1
| | | |-- part2 -> ../../../../../hda2
| | | `-- part4 -> ../../../../../hda4
| | `-- target1
| | `-- lun0
| | |-- disc -> ../../../../../hdb
| | `-- part1 -> ../../../../../hdb1
| `-- bus1
| `-- target0
| `-- lun0
| `-- cd -> ../../../../../hdc
`-- host2
`-- bus0
`-- target0
`-- lun0
|-- disc -> ../../../../../hde
`-- part1 -> ../../../../../hde1
2003-12-23 07:34:53 +03:00
fi
else
2004-01-14 05:34:38 +03:00
echo ide/host${ HOST } /bus${ BUS } /target${ TARGET } /lun0/part$3 discs/disc` get_dev_number $1 disk` /part$3
[PATCH] experimental CALLOUT script for devfs ide node creation with cd, disc, part
Here is a experimental CALLOUT script for udev to create devfs nodes
for IDE-devices. Not that I need these, I just wanted to see if it works :)
The script is really stupid, no error handling, nothing more than
absolutely needed. The rule uses the 'k' format char of the previous
patch. The %D is not used, so the user can have disc or disk :)
this single line:
CALLOUT, BUS="ide", PROGRAM="/etc/udev/ide-devfs.sh %k %b %n", ID="hd*", NAME="%1c", SYMLINK="%2c"
creates the following on my machine with two hard disks, one DVD and a PCMCIA-compact-flash inserted:
/udev
|-- hda
|-- hda1
|-- hda2
|-- hda4
|-- hdb
|-- hdb1
|-- hdc
|-- hde
|-- hde1
`-- ide
|-- host0
| |-- bus0
| | |-- target0
| | | `-- lun0
| | | |-- disc -> ../../../../../hda
| | | |-- part1 -> ../../../../../hda1
| | | |-- part2 -> ../../../../../hda2
| | | `-- part4 -> ../../../../../hda4
| | `-- target1
| | `-- lun0
| | |-- disc -> ../../../../../hdb
| | `-- part1 -> ../../../../../hdb1
| `-- bus1
| `-- target0
| `-- lun0
| `-- cd -> ../../../../../hdc
`-- host2
`-- bus0
`-- target0
`-- lun0
|-- disc -> ../../../../../hde
`-- part1 -> ../../../../../hde1
2003-12-23 07:34:53 +03:00
fi