systemd/man/logind.conf.xml

<?xml version='1.0'?> <!--*- Mode: nxml; nxml-child-indent: 2; indent-tabs-mode: nil -*-->
<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
  "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd">

<!--
  This file is part of systemd.

  Copyright 2010 Lennart Poettering

  systemd is free software; you can redistribute it and/or modify it
  under the terms of the GNU Lesser General Public License as published by
  the Free Software Foundation; either version 2.1 of the License, or
  (at your option) any later version.

  systemd is distributed in the hope that it will be useful, but
  WITHOUT ANY WARRANTY; without even the implied warranty of
  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
  Lesser General Public License for more details.

  You should have received a copy of the GNU Lesser General Public License
  along with systemd; If not, see <http://www.gnu.org/licenses/>.
-->

<refentry id="logind.conf" conditional='ENABLE_LOGIND'
    xmlns:xi="http://www.w3.org/2001/XInclude">
  <refentryinfo>
    <title>logind.conf</title>
    <productname>systemd</productname>

    <authorgroup>
      <author>
        <contrib>Developer</contrib>
        <firstname>Lennart</firstname>
        <surname>Poettering</surname>
        <email>lennart@poettering.net</email>
      </author>
    </authorgroup>
  </refentryinfo>

  <refmeta>
    <refentrytitle>logind.conf</refentrytitle>
    <manvolnum>5</manvolnum>
  </refmeta>

  <refnamediv>
    <refname>logind.conf</refname>
    <refname>logind.conf.d</refname>
    <refpurpose>Login manager configuration files</refpurpose>
  </refnamediv>

  <refsynopsisdiv>
    <para><filename>/etc/systemd/logind.conf</filename></para>
    <para><filename>/etc/systemd/logind.conf.d/*.conf</filename></para>
    <para><filename>/run/systemd/logind.conf.d/*.conf</filename></para>
    <para><filename>/usr/lib/systemd/logind.conf.d/*.conf</filename></para>
  </refsynopsisdiv>

  <refsect1>
    <title>Description</title>

    <para>These files configure various parameters of the systemd
    login manager,
    <citerefentry><refentrytitle>systemd-logind.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>.
    </para>
  </refsect1>

  <xi:include href="standard-conf.xml" xpointer="main-conf" />

  <refsect1>
    <title>Options</title>

    <para>All options are configured in the
    <literal>[Login]</literal> section:</para>

    <variablelist>

      <varlistentry>
        <term><varname>NAutoVTs=</varname></term>

        <listitem><para>Takes a positive integer. Configures how many
        virtual terminals (VTs) to allocate by default that, when
        switched to and are previously unused,
        <literal>autovt</literal> services are automatically spawned
        on. These services are instantiated from the template unit
        <filename>autovt@.service</filename> for the respective VT TTY
        name, for example, <filename>autovt@tty4.service</filename>.
        By default, <filename>autovt@.service</filename> is linked to
        <filename>getty@.service</filename>. In other words, login
        prompts are started dynamically as the user switches to unused
        virtual terminals. Hence, this parameter controls how many
        login <literal>gettys</literal> are available on the VTs. If a
        VT is already used by some other subsystem (for example, a
        graphical login), this kind of activation will not be
        attempted. Note that the VT configured in
        <varname>ReserveVT=</varname> is always subject to this kind
        of activation, even if it is not one of the VTs configured
        with the <varname>NAutoVTs=</varname> directive. Defaults to
        6. When set to 0, automatic spawning of
        <literal>autovt</literal> services is
        disabled.</para></listitem>
      </varlistentry>

      <varlistentry>
        <term><varname>ReserveVT=</varname></term>

        <listitem><para>Takes a positive integer. Identifies one
        virtual terminal that shall unconditionally be reserved for
        <filename>autovt@.service</filename> activation (see above).
        The VT selected with this option will be marked busy
        unconditionally, so that no other subsystem will allocate it.
        This functionality is useful to ensure that, regardless of how
        many VTs are allocated by other subsystems, one login
        <literal>getty</literal> is always available. Defaults to 6
        (in other words, there will always be a
        <literal>getty</literal> available on Alt-F6.). When set to 0,
        VT reservation is disabled.</para></listitem>
      </varlistentry>

      <varlistentry>
        <term><varname>KillUserProcesses=</varname></term>

        <listitem><para>Takes a boolean argument. Configures whether the processes of a
        user should be killed when the user logs out. If true, the scope unit
        corresponding to the session and all processes inside that scope will be
        terminated. If false, the scope is "abandoned", see
        <citerefentry><refentrytitle>systemd.scope</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
        and processes are not killed. Defaults to <literal>yes</literal>,
        but see the options <varname>KillOnlyUsers=</varname> and
        <varname>KillExcludeUsers=</varname> below.</para>

        <para>In addition to session processes, user process may run under the user
        manager unit <filename>user@.service</filename>. Depending on the linger
        settings, this may allow users to run processes independent of their login
        sessions. See the description of <command>enable-linger</command> in
        <citerefentry><refentrytitle>loginctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>.
        </para>

        <para>Note that setting <varname>KillUserProcesses=yes</varname>
        will break tools like
        <citerefentry project='die-net'><refentrytitle>screen</refentrytitle><manvolnum>1</manvolnum></citerefentry>
        and
        <citerefentry project='die-net'><refentrytitle>tmux</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
        unless they are moved out of the session scope. See example in
        <citerefentry><refentrytitle>systemd-run</refentrytitle><manvolnum>1</manvolnum></citerefentry>.
        </para></listitem>
      </varlistentry>

      <varlistentry>
        <term><varname>KillOnlyUsers=</varname></term>
        <term><varname>KillExcludeUsers=</varname></term>

        <listitem><para>These settings take space-separated lists of usernames that override
        the <varname>KillUserProcesses=</varname> setting. A user name may be added to
        <varname>KillExcludeUsers=</varname> to exclude the processes in the session scopes of
        that user from being killed even if <varname>KillUserProcesses=yes</varname> is set. If
        <varname>KillExcludeUsers=</varname> is not set, the <literal>root</literal> user is
        excluded by default. <varname>KillExcludeUsers=</varname> may be set to an empty value
        to override this default. If a user is not excluded, <varname>KillOnlyUsers=</varname>
        is checked next. If this setting is specified, only the session scopes of those users
        will be killed. Otherwise, users are subject to the
        <varname>KillUserProcesses=yes</varname> setting.</para></listitem>
      </varlistentry>

      <varlistentry>
        <term><varname>IdleAction=</varname></term>

        <listitem><para>Configures the action to take when the system
        is idle. Takes one of
        <literal>ignore</literal>,
        <literal>poweroff</literal>,
        <literal>reboot</literal>,
        <literal>halt</literal>,
        <literal>kexec</literal>,
        <literal>suspend</literal>,
        <literal>hibernate</literal>,
        <literal>hybrid-sleep</literal>, and
        <literal>lock</literal>.
        Defaults to <literal>ignore</literal>.</para>

        <para>Note that this requires that user sessions correctly
        report the idle status to the system. The system will execute
        the action after all sessions report that they are idle, no
        idle inhibitor lock is active, and subsequently, the time
        configured with <varname>IdleActionSec=</varname> (see below)
        has expired.</para>
        </listitem>
      </varlistentry>

      <varlistentry>
        <term><varname>IdleActionSec=</varname></term>

        <listitem><para>Configures the delay after which the action
        configured in <varname>IdleAction=</varname> (see above) is
        taken after the system is idle.</para></listitem>
      </varlistentry>

      <varlistentry>
        <term><varname>InhibitDelayMaxSec=</varname></term>

        <listitem><para>Specifies the maximum time a system shutdown
        or sleep request is delayed due to an inhibitor lock of type
        <literal>delay</literal> being active before the inhibitor is
        ignored and the operation executes anyway. Defaults to
        5.</para></listitem>
      </varlistentry>

      <varlistentry>
        <term><varname>HandlePowerKey=</varname></term>
        <term><varname>HandleSuspendKey=</varname></term>
        <term><varname>HandleHibernateKey=</varname></term>
        <term><varname>HandleLidSwitch=</varname></term>
        <term><varname>HandleLidSwitchDocked=</varname></term>

        <listitem><para>Controls whether logind shall handle the
        system power and sleep keys and the lid switch to trigger
        actions such as system power-off or suspend. Can be one of
        <literal>ignore</literal>,
        <literal>poweroff</literal>,
        <literal>reboot</literal>,
        <literal>halt</literal>,
        <literal>kexec</literal>,
        <literal>suspend</literal>,
        <literal>hibernate</literal>,
        <literal>hybrid-sleep</literal>, and
        <literal>lock</literal>.
        If <literal>ignore</literal>, logind will never handle these
        keys. If <literal>lock</literal>, all running sessions will be
        screen-locked; otherwise, the specified action will be taken
        in the respective event. Only input devices with the
        <literal>power-switch</literal> udev tag will be watched for
        key/lid switch events. <varname>HandlePowerKey=</varname>
        defaults to <literal>poweroff</literal>.
        <varname>HandleSuspendKey=</varname> and
        <varname>HandleLidSwitch=</varname> default to
        <literal>suspend</literal>.
        <varname>HandleLidSwitchDocked=</varname> defaults to
        <literal>ignore</literal>.
        <varname>HandleHibernateKey=</varname> defaults to
        <literal>hibernate</literal>. If the system is inserted in a
        docking station, or if more than one display is connected, the
        action specified by <varname>HandleLidSwitchDocked=</varname>
        occurs; otherwise the <varname>HandleLidSwitch=</varname>
        action occurs.</para></listitem>
      </varlistentry>

      <varlistentry>
        <term><varname>PowerKeyIgnoreInhibited=</varname></term>
        <term><varname>SuspendKeyIgnoreInhibited=</varname></term>
        <term><varname>HibernateKeyIgnoreInhibited=</varname></term>
        <term><varname>LidSwitchIgnoreInhibited=</varname></term>

        <listitem><para>Controls whether actions triggered by the
        power and sleep keys and the lid switch are subject to
        inhibitor locks. These settings take boolean arguments. If
        <literal>no</literal>, the inhibitor locks taken by
        applications in order to block the requested operation are
        respected. If <literal>yes</literal>, the requested operation
        is executed in any case.
        <varname>PowerKeyIgnoreInhibited=</varname>,
        <varname>SuspendKeyIgnoreInhibited=</varname> and
        <varname>HibernateKeyIgnoreInhibited=</varname> default to
        <literal>no</literal>.
        <varname>LidSwitchIgnoreInhibited=</varname> defaults to
        <literal>yes</literal>. This means that the lid switch does
        not respect suspend blockers by default, but the power and
        sleep keys do. </para></listitem>
      </varlistentry>

      <varlistentry>
        <term><varname>HoldoffTimeoutSec=</varname></term>

        <listitem><para>Specifies the timeout after system startup or
        system resume in which systemd will hold off on reacting to
        lid events. This is required for the system to properly
        detect any hotplugged devices so systemd can ignore lid events
        if external monitors, or docks, are connected. If set to 0,
        systemd will always react immediately, possibly before the
        kernel fully probed all hotplugged devices. This is safe, as
        long as you do not care for systemd to account for devices
        that have been plugged or unplugged while the system was off.
        Defaults to 30s.</para></listitem>
      </varlistentry>

      <varlistentry>
        <term><varname>RuntimeDirectorySize=</varname></term>

        <listitem><para>Sets the size limit on the
        <varname>$XDG_RUNTIME_DIR</varname> runtime directory for each
        user who logs in. Takes a size in bytes, optionally suffixed
        with the usual K, G, M, and T suffixes, to the base 1024
        (IEC). Alternatively, a numerical percentage suffixed by
        <literal>%</literal> may be specified, which sets the size
        limit relative to the amount of physical RAM. Defaults to 10%.
        Note that this size is a safety limit only. As each runtime
        directory is a tmpfs file system, it will only consume as much
        memory as is needed.</para></listitem>
      </varlistentry>

      <varlistentry>
        <term><varname>InhibitorsMax=</varname></term>

        <listitem><para>Controls the maximum number of concurrent inhibitors to permit. Defaults to 8192
        (8K).</para></listitem>
      </varlistentry>

      <varlistentry>
        <term><varname>SessionsMax=</varname></term>

        <listitem><para>Controls the maximum number of concurrent user sessions to manage. Defaults to 8192
        (8K). Depending on how the <filename>pam_systemd.so</filename> module is included in the PAM stack
        configuration, further login sessions will either be refused, or permitted but not tracked by
        <filename>systemd-logind</filename>.</para></listitem>
      </varlistentry>

      <varlistentry>
        <term><varname>UserTasksMax=</varname></term>

        <listitem><para>Sets the maximum number of OS tasks each user
        may run concurrently. This controls the
        <varname>TasksMax=</varname> setting of the per-user slice
        unit, see
        <citerefentry><refentrytitle>systemd.resource-control</refentrytitle><manvolnum>5</manvolnum></citerefentry>
        for details. Defaults to 12288 (12K).</para></listitem>
      </varlistentry>

      <varlistentry>
        <term><varname>RemoveIPC=</varname></term>

        <listitem><para>Controls whether System V and POSIX IPC objects belonging to the user shall be removed when the
        user fully logs out. Takes a boolean argument. If enabled, the user may not consume IPC resources after the
        last of the user's sessions terminated. This covers System V semaphores, shared memory and message queues, as
        well as POSIX shared memory and message queues. Note that IPC objects of the root user and other system users
        are excluded from the effect of this setting. Defaults to <literal>yes</literal>.</para></listitem>
      </varlistentry>

    </variablelist>
  </refsect1>

  <refsect1>
      <title>See Also</title>
      <para>
        <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
        <citerefentry><refentrytitle>systemd-logind.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>,
        <citerefentry><refentrytitle>loginctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
        <citerefentry><refentrytitle>systemd-system.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>
      </para>
  </refsect1>

</refentry>