diff --git a/man/logind.conf.xml b/man/logind.conf.xml index 9b0e1818495..994e0e11404 100644 --- a/man/logind.conf.xml +++ b/man/logind.conf.xml @@ -261,7 +261,7 @@ Controls whether actions that systemd-logind takes when the power and sleep keys and the lid switch are triggered are subject to high-level inhibitor locks ("shutdown", "sleep", "idle"). Low level inhibitor - locks ("handle-*-key"), are always honoured, irrespective of this setting. + locks ("handle-*-key"), are always honored, irrespective of this setting. These settings take boolean arguments. If no, the inhibitor locks taken by applications are respected. If yes, diff --git a/man/sd-event.xml b/man/sd-event.xml index fc615f09067..24a69bb645a 100644 --- a/man/sd-event.xml +++ b/man/sd-event.xml @@ -97,7 +97,7 @@ iteration a single event source is dispatched. Each time an event source is dispatched the kernel is polled for new events, before the next event source is dispatched. The event loop is designed to - honour priorities and provide fairness within each priority. It is + honor priorities and provide fairness within each priority. It is not designed to provide optimal throughput, as this contradicts these goals due the limitations of the underlying epoll7 diff --git a/man/sd_event_source_set_priority.xml b/man/sd_event_source_set_priority.xml index 8c9b39fe5e2..6e7032fc80f 100644 --- a/man/sd_event_source_set_priority.xml +++ b/man/sd_event_source_set_priority.xml @@ -115,7 +115,7 @@ reliable. However, it is guaranteed that if events are seen on multiple same-priority event sources at the same time, each one is not dispatched again until all others have been dispatched - once. This behaviour guarantees that within each priority + once. This behavior guarantees that within each priority particular event sources do not starve or dominate the event loop. diff --git a/man/systemctl.xml b/man/systemctl.xml index 3b883ea754e..b51badf7fe9 100644 --- a/man/systemctl.xml +++ b/man/systemctl.xml @@ -306,7 +306,7 @@ ignore-requirements is similar to ignore-dependencies, but only causes the requirement dependencies to be ignored, the ordering - dependencies will still be honoured. + dependencies will still be honored. @@ -1006,7 +1006,7 @@ kobject-uevent 1 systemd-udevd-kernel.socket systemd-udevd.service desired, combine this command with the switch, or invoke start with appropriate arguments later. Note that in case of unit instance enablement (i.e. enablement of units of the form foo@bar.service), symlinks named the same as instances are created in the - unit configuration diectory, however they point to the single template unit file they are instantiated + unit configuration directory, however they point to the single template unit file they are instantiated from. This command expects either valid unit names (in which case various unit file directories are diff --git a/man/systemd-coredump.xml b/man/systemd-coredump.xml index a28dc62e5a8..4a1bc8b2966 100644 --- a/man/systemd-coredump.xml +++ b/man/systemd-coredump.xml @@ -107,7 +107,7 @@ systemd-sysctl8. - The behaviour of systemd-coredump itself is configured through the configuration file + The behavior of systemd-coredump itself is configured through the configuration file /etc/systemd/coredump.conf and corresponding snippets /etc/systemd/coredump.conf.d/*.conf, see coredump.conf5. A new diff --git a/man/systemd-mount.xml b/man/systemd-mount.xml index e6c07863c08..06b7c85bd83 100644 --- a/man/systemd-mount.xml +++ b/man/systemd-mount.xml @@ -260,7 +260,7 @@ The udev Database - If is used, systemd-mount honours a couple of additional udev + If is used, systemd-mount honors a couple of additional udev properties of block devices: diff --git a/man/systemd-nspawn.xml b/man/systemd-nspawn.xml index 5ac54df81a6..f1530342966 100644 --- a/man/systemd-nspawn.xml +++ b/man/systemd-nspawn.xml @@ -405,7 +405,7 @@ purposes (usually in the range beyond the host's UID/GID 65536). The parameter may be specified as follows: - If one or two colon-separated numers are specified, user namespacing is turned on. The first + If one or two colon-separated numbers are specified, user namespacing is turned on. The first parameter specifies the first host UID/GID to assign to the container, the second parameter specifies the number of host UIDs/GIDs to assign to the container. If the second parameter is omitted, 65536 UIDs/GIDs are assigned. @@ -425,13 +425,13 @@ range is automatically chosen. As first step, the file owner of the root directory of the container's directory tree is read, and it is checked that it is currently not used by the system otherwise (in particular, that no other container is using it). If this check is successful, the UID/GID range determined - this way is used, similar to the behaviour if "yes" is specified. If the check is not successful (and thus + this way is used, similar to the behavior if "yes" is specified. If the check is not successful (and thus the UID/GID range indicated in the root directory's file owner is already used elsewhere) a new – currently unused – UID/GID range of 65536 UIDs/GIDs is randomly chosen between the host UID/GIDs of 524288 and 1878982656, always starting at a multiple of 65536. This setting implies (see below), which has the effect that the files and directories in the container's directory tree will be owned by the appropriate users of the range picked. Using this option - makes user namespace behaviour fully automatic. Note that the first invocation of a previously unused + makes user namespace behavior fully automatic. Note that the first invocation of a previously unused container image might result in picking a new UID/GID range for it, and thus in the (possibly expensive) file ownership adjustment operation. However, subsequent invocations of the container will be cheap (unless of course the picked UID/GID range is assigned to a different use by then). @@ -440,7 +440,7 @@ It is recommended to assign at least 65536 UIDs/GIDs to each container, so that the usable UID/GID range in the container covers 16 bit. For best security, do not assign overlapping UID/GID ranges to multiple containers. It is hence a good idea to use the upper 16 bit of the host 32-bit UIDs/GIDs as container identifier, while the lower 16 - bit encode the container UID/GID used. This is in fact the behaviour enforced by the + bit encode the container UID/GID used. This is in fact the behavior enforced by the option. When user namespaces are used, the GID range assigned to each container is always chosen identical to the @@ -722,7 +722,7 @@ and the subdirectory is symlinked into the host at the same location. try-host and try-guest do the same but do not fail if - the host does not have persistent journalling enabled. If + the host does not have persistent journaling enabled. If auto (the default), and the right subdirectory of /var/log/journal exists, it will be bind mounted into the container. If the diff --git a/man/systemd-run.xml b/man/systemd-run.xml index 15f9119e541..2ad8cb0835b 100644 --- a/man/systemd-run.xml +++ b/man/systemd-run.xml @@ -402,7 +402,7 @@ There is a screen on: when the user first logs in, and stays around as long as at least one login session is open. After the user logs out of the last session, user@.service and all services underneath it - are terminated. This behaviour is the default, when "lingering" is + are terminated. This behavior is the default, when "lingering" is not enabled for that user. Enabling lingering means that user@.service is started automatically during boot, even if the user is not logged in, and that the service is diff --git a/man/systemd-system.conf.xml b/man/systemd-system.conf.xml index a268397d09b..1d995f143e1 100644 --- a/man/systemd-system.conf.xml +++ b/man/systemd-system.conf.xml @@ -109,7 +109,7 @@ CtrlAltDelBurstAction= Defines what action will be performed - if user presses Ctr-Alt-Delete more than 7 times in 2s. + if user presses Ctrl-Alt-Delete more than 7 times in 2s. Can be set to reboot-force, poweroff-force or disabled with ignore. Defaults to reboot-force. diff --git a/man/systemd.exec.xml b/man/systemd.exec.xml index 986985ad35d..c088042a51a 100644 --- a/man/systemd.exec.xml +++ b/man/systemd.exec.xml @@ -988,7 +988,7 @@ the unit's own user and group to themselves and everything else to the nobody user and group. This is useful to securely detach the user and group databases used by the unit from the rest of the system, and thus to create an effective sandbox environment. All files, directories, processes, IPC objects and - other resources owned by users/groups not equalling root or the unit's own will stay visible + other resources owned by users/groups not equaling root or the unit's own will stay visible from within the unit but appear owned by the nobody user and group. If this mode is enabled, all unit processes are run without privileges in the host user namespace (regardless if the unit's own user/group is root or not). Specifically this means that the process will have zero process @@ -1560,7 +1560,7 @@ $MAINPID - The PID of the units main process if it is + The PID of the unit's main process if it is known. This is only set for control processes as invoked by ExecReload= and similar. diff --git a/man/systemd.link.xml b/man/systemd.link.xml index 10fddeced0f..8edbe758d94 100644 --- a/man/systemd.link.xml +++ b/man/systemd.link.xml @@ -107,7 +107,7 @@ A whitespace-separated list of shell-style globs matching the device name, as exposed by the udev property - "INTERFACE". This can not be used to match on names that have + "INTERFACE". This cannot be used to match on names that have already been changed from userspace. Caution is advised when matching on kernel-assigned names, as they are known to be unstable between reboots. diff --git a/man/systemd.socket.xml b/man/systemd.socket.xml index d759e172898..0ce1203cfbd 100644 --- a/man/systemd.socket.xml +++ b/man/systemd.socket.xml @@ -535,7 +535,7 @@ and the kernel will ignore initial ACK packets without any data. The argument specifies the approximate amount of time the kernel should wait for incoming data before falling back - to the normal behavior of honouring empty ACK packets. This + to the normal behavior of honoring empty ACK packets. This option is beneficial for protocols where the client sends the data first (e.g. HTTP, in contrast to SMTP), because the server process will not be woken up unnecessarily before it diff --git a/man/systemd.unit.xml b/man/systemd.unit.xml index 9778283fec5..79bdb2cd38d 100644 --- a/man/systemd.unit.xml +++ b/man/systemd.unit.xml @@ -195,7 +195,7 @@ instantiated units, this logic will first look for the instance .d/ subdirectory and read its .conf files, followed by the template .d/ subdirectory and the .conf files there. Also note that - settings from the [Install] section are not honoured in drop-in unit files, + settings from the [Install] section are not honored in drop-in unit files, and have no effect. In addition to /etc/systemd/system, the drop-in .d