IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
This patch adds netdev ipvtap that is based on the
IP-VLAN network interface, called ipvtap. An ipvtap device can be created
in the same way as an ipvlan device, using 'kind ipvtap', and then accessed
using the tap user space interface.
Certain distributions (e.g. Arch Linux) require booting with initrd, as
they lack support for commonly used filesystems in the kernel (i.e. the
support is compiled in as modules)
The `mount` utility has an unexpected behavior when run with libasan,
causing false-positives during the integration testing.
For example, on Arch Linux with LD_PRELOAD pointing to libasan:
```
bash-5.0# mount -o remount,rw -v /
mount: /dev/sda1 mounted on /.
bash-5.0# echo $?
1
```
However:
```
bash-5.0# LD_PRELOAD= mount -o remount,rw -v /
mount: /dev/sda1 mounted on /.
bash-5.0# echo $?
0
```
Further investigation with strace shows a LeakSanitizer error:
```
bash-5.0# strace -s 512 mount -o remount,rw -v /
...
write(2, "==355==LeakSanitizer has encountered a fatal error.\n", 52) = -1 EBADF (Bad file descriptor)
write(2, "ReportFile::Write() can't output requested buffer!\n", 51) = -1 EBADF (Bad file descriptor)
exit_group(1) = ?
+++ exited with 1 +++
```
Let's workaround this by clearing the LD_PRELOAD variable for
systemd-remount-fs.service
Allow users to set the IPv4 DF bit in outgoing packets, or to inherit its
value from the IPv4 inner header. If the encapsulated protocol is IPv6 and
DF is configured to be inherited, always set it.
It makes more sense to call VXLAN ID as
1. the VXLAN Network Identifier (VNI) (or VXLAN Segment ID)
2. test-network: rename VXLAN Id to VNI
3. fuzzer: Add VXLAN VNI directive to fuzzer
The main testsuite service timeouts sporadically when waiting for
other testsuite-* units. As the test timeout is handled by
the "test executor" (test.sh), let's disable it for the service.
This should (hopefully) fix the test flakiness.
When shooting down a service with SIGABRT the user might want to have a
much longer stop timeout than on regular stops/shutdowns. Especially in
the face of short stop timeouts the time might not be sufficient to
write huge core dumps before the service is killed.
This commit adds a dedicated (Default)TimeoutAbortSec= timer that is
used when stopping a service via SIGABRT. In all other cases the
existing TimeoutStopSec= is used. The timer value is unset by default
to skip the special handling and use TimeoutStopSec= for state
'stop-watchdog' to keep the old behaviour.
If the service is in state 'stop-watchdog' and the service should be
stopped explicitly we still go to 'stop-sigterm' and re-apply the usual
TimeoutStopSec= timeout.
In cgroup v2 we have protection tunables -- currently MemoryLow and
MemoryMin (there will be more in future for other resources, too). The
design of these protection tunables requires not only intermediate
cgroups to propagate protections, but also the units at the leaf of that
resource's operation to accept it (by setting MemoryLow or MemoryMin).
This makes sense from an low-level API design perspective, but it's a
good idea to also have a higher-level abstraction that can, by default,
propagate these resources to children recursively. In this patch, this
happens by having descendants set memory.low to N if their ancestor has
DefaultMemoryLow=N -- assuming they don't set a separate MemoryLow
value.
Any affected unit can opt out of this propagation by manually setting
`MemoryLow` to some value in its unit configuration. A unit can also
stop further propagation by setting `DefaultMemoryLow=` with no
argument. This removes further propagation in the subtree, but has no
effect on the unit itself (for that, use `MemoryLow=0`).
Our use case in production is simplifying the configuration of machines
which heavily rely on memory protection tunables, but currently require
tweaking a huge number of unit files to make that a reality. This
directive makes that significantly less fragile, and decreases the risk
of misconfiguration.
After this patch is merged, I will implement DefaultMemoryMin= using the
same principles.
We had all kinds of indentation: 2 sp, 3 sp, 4 sp, 8 sp, and mixed.
4 sp was the most common, in particular the majority of scripts under test/
used that. Let's standarize on 4 sp, because many commandlines are long and
there's a lot of nesting, and with 8sp indentation less stuff fits. 4 sp
also seems to be the default indentation, so this will make it less likely
that people will mess up if they don't load the editor config. (I think people
often use vi, and vi has no support to load project-wide configuration
automatically. We distribute a .vimrc file, but it is not loaded by default,
and even the instructions in it seem to discourage its use for security
reasons.)
Also remove the few vim config lines that were left. We should either have them
on all files, or none.
Also remove some strange stuff like '#!/bin/env bash', yikes.
Media Access Control Security (MACsec) is an 802.1AE IEEE
industry-standard security technology that provides secure
communication for all traffic on Ethernet links.
MACsec provides point-to-point security on Ethernet links between
directly connected nodes and is capable of identifying and preventing
most security threats, including denial of service, intrusion,
man-in-the-middle, masquerading, passive wiretapping, and playback attacks.
Closes#5754
We would accept a message with 40k signature and spend a lot of time iterating
over the nested arrays. Let's just reject it early, as we do for !gvariant
messages.
By default the run_qemu() function enables KVM automatically
if it detects the /dev/kvm char device and if the machine is not
already a KVM one. Let's add a TEST_NO_KVM env variable to suppress
this detection.
Make the interactive debugging of (particularly QEMU) machines less
painful, by replacing the default vt220 TERM with linux one, and
by not shutting down the machine after running the test itself.
to reduce memory requirements for volume manipulation. Also,
to further improve the test performance, reduce number of PBKDF
iterations to 1000 (allowed minimum).
We'd install the service file, and then dbus-broker-launcher because it is
mentioned in ExecStart=, but not the main executable, so nothing would work.
Let's just install dbus-broker executables if found. They are small, so this
doesn't matter much, and is much easier than figuring the exact conditions
under which dbus-broker will be used instead of dbus-daemon.
Since systemd 206 the combination of systemd and mkinitcpio
causes, under certain conditions, the rootfs to be double fsck'd.
Symptoms:
```
:: performing fsck on '/dev/sda1'
systemd: clean, 3523/125488 files, 141738/501760 blocks
********************** WARNING **********************
* *
* The root device is not configured to be mounted *
* read-write! It may be fsck'd again later. *
* *
*****************************************************
<snip>
[ OK ] Started File System Check on Root Device
```
This occurs when neither 'ro' or 'rw', or only 'ro' is present
on the kernel command line. The solution is to mount the roofs
as read-write on the kernel command line, so systemd knows to not fsck
it again.
Previously, 'degraded' state is ambiguous for bonding or bridge master:
1. one or more slave interfaces does not have carrier,
2. no link local address is assigned to the master,
3. combination of the above two.
This makes the above case 1 and 3 are in the new 'degraded-carrier'
state, and makes 'degraded' state as all slaves are active but no
link local address on master.
When enabled, three samples are used to determine the value of a
received bit by majority rule.
This patch adds support for the TripleSampling= option in the [CAN]
section of .network files.
If the QEMU_SMP value has not been explicitly set, try to determine it
from the number of online CPUs using the nproc utility. If this approach
fails, fall back to the default value QEMU_SMP=1.
This change should significantly help when running integration tests
under QEMU on multicore systems.
This test exposes a race condition when running in LXC, see issue #11848
for details. Until that is understood and fixed, skip the test as it's
not a recent regression.
This avoids a warning:
An address '192.168.42.100' is specified without prefix length. The
behavior of parsing addresses without prefix length will be changed
in the future release. Please specify prefix length explicitly.
This test case is a bit silly, but it shows that our code is unprepared to
handle so many network servers, with quadratic complexity in various places.
I don't think there are any valid reasons to have hundres of NTP servers
configured, so let's just emit a warning and cut the list short.
https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=13354
- This test needs resolved, so make sure it is started. In some Debian
environments it is not.
- It was an unnecessary, and now failing assumption that name servers
get atomically written to the resolved's resolv.conf. Wait until both
expected name servers are in the file.
Since version 241 (commit ea4678?), querying MX type records for
single-label domains does not actually forward the query to the DNS
server any more. Use "example.com" instead, which is the recommended
test domain anyway.
dnsmasq 2.80 changed behaviour when being queried by resolved with
enabled DNSSEC: It returns errors for SOA and DS queries which cause the
entire query to fail. As we don't configure DNSSEC in this test anyway,
just disable it so that we retain compatibility with old and new dnsmasq
versions.
The test was failing in Ubuntu CI with a 30s timeout. It makes
sense to keep the file so exercise the set allocation logic, but
we can make it shorter.
We were already using OrderedSets in the manager object, but strvs in the
configuration parsing code. Using sets gives us better scaling when many
domains are used.
In oss-fuzz #13059 the attached reproducer takes approximately 30.5 s to be
parsed. Converting to sets makes this go down to 10s. This is not _vastly_
faster, but using sets seems like a nicer approach anyway. In particular, we
avoid the quadratic de-unification operation after each addition.
The original version of the test used netcat along with a standard
AF_UNIX socket, which caused issues across different netcat
implementations. The AF_UNIX socket was then replaced by a FIFO with a
simple echo, which, however, suffers from the same issue (some echo
implementations don't check if the write() was successful).
Let's revert back to the AF_UNIX socket, but replace netcat with socat,
which, hopefully, resolves the main issue.
Relevant commit: 9b45c2bf02
When there is bad link in the network the carrier goes up/down.
This makes networkd stops all the clients and drop config.
But if the remote router/dhcpserver running a prevention
of DHCP Starvation attack or DHCP Flood attack it does not allow
networkd to take a DHCP lease resulting failure in configuration.
This patch allows to keep the client running and keep the conf
also for this scenario.
Closes#9111
Currently /boot/initramfs-linux.img is used as the default initrd for ArchLinux.
Although, since the kernel modules that are not necessary for the host environment are removed from
initramfs-linux.img by mkinitcpio 's autodetect hook, the kernel modules necessary for qemu may be missing.
(ata_piix, ext4, and so on in my case.)
As a result, the test environment may not be built properly and the test will be failed.
initramfs-linux-fallback.img will skip this autodetect hook, so the test will run successfully in more
environments.
Both initramfs-linux.img and initramfs-linux-fallback.img are generated by default.
rescue.service pulls in /bin/plymouth, which doesn't exist on some
distributions (e.g. Arch Linux). Let's mark it as optional, as it's not
even required by the referencing unit and causes unwanted fails in the
integration testsuite.
The test is a bit messy because it must be done on a device that
enforces a tentative state for IPv6 addresses, and it appears
that the dummy device does not. So we use a bond instead.
Signed-off-by: Daniel Axtens <dja@axtens.net>