1
0
mirror of https://github.com/systemd/systemd.git synced 2024-11-15 07:24:00 +03:00
Commit Graph

36 Commits

Author SHA1 Message Date
Tom Gundersen
12b42c7667 man: revert dynamic paths for split-usr setups
This did not really work out as we had hoped. Trying to do this upstream
introduced several problems that probably makes it better suited as a
downstream patch after all. At any rate, it is not releaseable in the
current state, so we at least need to revert this before the release.

 * by adjusting the path to binaries, but not do the same thing to the
   search path we end up with inconsistent man-pages. Adjusting the search
   path too would be quite messy, and it is not at all obvious that this is
   worth the effort, but at any rate it would have to be done before we
   could ship this.

 * this means that distributed man-pages does not make sense as they depend
   on config options, and for better or worse we are still distributing
   man pages, so that is something that definitely needs sorting out before
   we could ship with this patch.

 * we have long held that split-usr is only minimally supported in order
   to boot, and something we hope will eventually go away. So before we start
   adding even more magic/effort in order to make this work nicely, we should
   probably question if it makes sense at all.
2015-06-18 19:47:44 +02:00
Daniel Mack
7d2e33a416 man: replace hard-coded /usr/lib
Replace some /usr/lib occurences in man/ with &rootprefix;/lib.
2015-06-02 07:54:51 -07:00
Filipe Brandenburger
681eb9cf2b man: generate configured paths in manpages
In particular, use /lib/systemd instead of /usr/lib/systemd in distributions
like Debian which still have not adopted a /usr merge setup.

Use XML entities from man/custom-entities.ent to replace configured paths while
doing XSLT processing of the original XML files. There was precedent of some
files (such as systemd.generator.xml) which were already using this approach.

This addresses most of the (manual) fixes from this patch:
http://anonscm.debian.org/cgit/pkg-systemd/systemd.git/tree/debian/patches/Fix-paths-in-man-pages.patch?h=experimental-220

The idea of using generic XML entities was presented here:
http://lists.freedesktop.org/archives/systemd-devel/2015-May/032240.html

This patch solves almost all the issues, with the exception of:
- Path to /bin/mount and /bin/umount.
- Generic statements about preference of /lib over /etc.

These will be handled separately by follow up patches.

Tested:
- With default configure settings, ran "make install" to two separate
  directories and compared the output to confirm they matched exactly.
- Used a set of configure flags including $CONFFLAGS from Debian:
  http://anonscm.debian.org/cgit/pkg-systemd/systemd.git/tree/debian/rules
  Installed the tree and confirmed the paths use /lib/systemd instead of
  /usr/lib/systemd and that no other unexpected differences exist.
- Confirmed that `make distcheck` still passes.
2015-05-28 19:28:19 +02:00
Torstein Husebø
ff9b60f38b treewide: Correct typos and spell plural of bus consistent 2015-05-11 15:51:30 +02:00
Susant Sahani
5cc0748e19 networkd: add man for vti6 tunnel 2015-04-29 21:54:00 +02:00
Susant Sahani
38422da754 networkd man: fix man and config name.
Rename bond confs and man as well.

[tomegun: dropped a stray comma]
2015-04-21 11:17:37 +02:00
Susant Sahani
81bd37a85f networkd: Add support for bond option.
This patch adds configurational support for bond option.

Test conf:

bond.netdev

 ---
[NetDev]
Name=bond1
Kind=bond

[Bond]
ArpAllTargets=all
PrimaryReselect=better
ArpIntervalSec=10s
ArpIpTargets= 192.168.8.102 192.168.8.101 192.168.8.102
 ---

$cat /proc/net/bonding/bond1
Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)

Bonding Mode: load balancing (round-robin)
MII Status: up
MII Polling Interval (ms): 0
Up Delay (ms): 0
Down Delay (ms): 0
ARP Polling Interval (ms): 10000
ARP IP target/s (n.n.n.n form): 192.168.8.100, 192.168.8.101, 192.168.8.102
2015-04-20 20:14:34 +02:00
Susant Sahani
cffacc741c networkd vxlan: Add support for enabling UDP checksums
Add UDPCheckSum option to enable transmitting UDP checksums when doing
VXLAN/IPv4. Add UDP6ZeroChecksumRx, and UDP6ZeroChecksumTx
options to enable sending zero checksums and receiving zero
checksums in VXLAN/IPv6

[tomegun: rebase manpage due to whitespace changes]
2015-04-20 20:09:32 +02:00
Lennart Poettering
a681888122 man: fix typo 2015-03-03 00:11:51 +01:00
Zbigniew Jędrzejewski-Szmek
798d3a524e Reindent man pages to 2ch 2015-02-03 23:11:35 -05:00
Lennart Poettering
6c2b9c8da1 man: turn new netdev table into a proper table 2015-01-29 01:40:48 +01:00
Tom Gundersen
fc07d5d3a9 man: netdev - add some minimal explanation to the different netdev kinds and modes
Would be awesome to expand on this a lot, as there is currently no decent documentation for most of these things.
2015-01-28 21:35:54 +01:00
Tom Gundersen
73b23bea86 networkd: tunnel - call tunnel modes ipip6, not ip4ipv6 to match ip(8) 2015-01-28 21:35:54 +01:00
Lennart Poettering
ad4cdc5515 man: fix minor type in man page 2015-01-26 21:52:07 +01:00
Susant Sahani
b16492f86f networkd: Introduce ip6gre and ip6gretap
This patch introduces ipv6 gre and gretap.

test:

ip6gre.netdev:
[NetDev]
Name=ip6gretap
Kind=ip6gretap

[Tunnel]
Local=2a00:ffde:4567:edde::4987
Remote=2001:473:fece:cafe::5179

ip6gre.network:
[Match]
Name=eno16777736

[Network]
Tunnel=ip6gretap

ip link

6: ip6gre@eno16777736: <POINTOPOINT,NOARP> mtu 1448 qdisc noop state
DOWN mode DEFAULT group default
    link/gre6 2a:00:ff🇩🇪45:67:ed🇩🇪00:00:00:00:00:00:49:87 peer
20:01:04:73:fe:ce:ca:fe:00:00:00:00:00:00:51:79
2015-01-22 21:29:42 +01:00
Susant Sahani
855ee1a1d2 networkd: Introduce IP6 tunnel
This patch enables networkd to create IP6 tunnels

example conf:

ipip6.netdev:
[NetDev]
Name=ipip6-tunnel
Kind=ip6tnl

[Tunnel]
Mode=ip4ipv6
Local=2a00:ffde:4567:edde::4987
Remote=2001:473:fece:cafe::5179

ipip6.network
[Match]
Name=wlan0

[Network]
Tunnel=ipip6-tunnel

23: ipip6-tunnel@wlan0: <POINTOPOINT,NOARP> mtu 1452 qdisc noop state
DOWN mode DEFAULT group default
    link/tunnel6 2a00:ffde:4567:edde::4987 peer 2001:473:fece:cafe::5179
2015-01-22 21:29:42 +01:00
Susant Sahani
1af2536acf networkd: introduce gretap
This patch introdeces gretap to networkd
2015-01-22 21:29:41 +01:00
Tom Gundersen
c4a5ddc9f2 networkd: netdev - add ipvlan support 2015-01-19 23:25:16 +01:00
Jan Engelhardt
bd763d350c doc: add cross-references between systemd.{link, netdev, network} 2015-01-13 18:27:33 +01:00
Susant Sahani
85a8eeee36 networkd: support vxlan parameters
V3: fix copy paste error
V4: Make manual and config more readable

Add vxlan paramertes to config.
2014-12-04 11:13:32 +01:00
Tom Gundersen
e0fbf1fcff networkd: warn when ignoring unsupported tuntap options
The interface for creating tuntap devices should be ported to rtnl so it would support the same settings
as other kinds. In the meantime, the best one can do is to drop in a .link file to set the desired options.
2014-08-18 18:11:42 +02:00
Susant Sahani
d9c52fa045 networkd: add support for bond options
The following bond options are supported by this patch.

MIIMonitorSec:
Specifies the frequency in milli-seconds that MII link
monitoring will occur.

UpDelaySec:
Specifies the delay time in milli-seconds to enable a link
after a link up status has been detected.

DownDelaySec:
Specifies the delay time in milli-seconds to disable a link
after a link failure has been detected.

changes:
1. Added gconf variables.
2. man page

conf:

[NetDev]
Name=bond1
Kind=bond

[Bond]
Mode=802.3ad
TransmitHashPolicy=layer2+3
LacpduTransmitRate=fast
MIIMonitorSec=1s
UpDelaySec=2s
DownDelaySec=8s

cat /proc/net/bonding/bond1
Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)

Bonding Mode: IEEE 802.3ad Dynamic link aggregation
Transmit Hash Policy: layer2+3 (2)
MII Status: up
MII Polling Interval (ms): 1000
Up Delay (ms): 2000
Down Delay (ms): 8000

802.3ad info
LACP rate: fast
Min links: 0
Aggregator selection policy (ad_select): stable
bond bond1 has no active aggregator

[tomegun: rephrased manpage, dropped bond_ prefix from variables]
2014-07-21 20:35:21 +02:00
Susant Sahani
fb1021a26d networkd: bond add support for lacp rate
LacpduTransmitRate
option specifies the rate in which link partner to transmit
LACPDU packets in 802.3ad mode.  Possible values
slow : Request partner to transmit LACPDUs every 30 seconds
fast : Request partner to transmit LACPDUs every 1 second
The default is slow.

chages:
1. Added enum bond_lacp_rate_table
2. gperf LacpduTransmitRate

Test:
conf file:
[NetDev]
Name=bond1
Kind=bond

[Bond]
Mode=802.3ad
LacpduTransmitRate=fast

test:
cat /proc/net/bonding/bond1
Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)

Bonding Mode: IEEE 802.3ad Dynamic link aggregation
Transmit Hash Policy: layer2+3 (2)
MII Status: up
MII Polling Interval (ms): 0
Up Delay (ms): 0
Down Delay (ms): 0

802.3ad info
LACP rate: fast
Min links: 0
Aggregator selection policy (ad_select): stable
bond bond1 has no active aggregator

[tomegun: renamed from LacpduTransmitRate to LACPTransmitRate, manpage fixes and
dropped bond_ prefix from variables]
2014-07-21 20:35:21 +02:00
Susant Sahani
227cdf2c7c networkd: add support for bond transmit hash policy
This patch adds support  the transmit hash policy to use
for slave selection in balance-xor, 802.3ad, and tlb modes

layer2, layer3+4, layer2+3, encap3+4, encap3+4

Added:
1. BondXmitHashPolicy
2. conf param TransmitHashPolicy

Test conf:
[NetDev]
Name=bond1
Kind=bond

[Bond]
Mode=802.3ad
TransmitHashPolicy=layer2+3

test output:
cat /proc/net/bonding/bond1
Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)

Bonding Mode: IEEE 802.3ad Dynamic link aggregation
Transmit Hash Policy: layer2+3 (2)
MII Status: up
MII Polling Interval (ms): 0
Up Delay (ms): 0
Down Delay (ms): 0

802.3ad info
LACP rate: slow
Min links: 0
Aggregator selection policy (ad_select): stable
bond bond1 has no active aggregator

[tomegun: dropped bond_ prefix from new Bond variable, drop repeated man-page section]
2014-07-21 20:35:21 +02:00
Tom Gundersen
7c1cff4ff7 man: systemd.netdev - make it clear that we do not touch preexisting netdevs
We will happily use bridges/bonds as master devices, but we will not change their settings if they were created by
someone else.
2014-07-14 12:25:42 +02:00
Susant Sahani
fe8ac65b68 networkd: add support for mode
This patch adds supports networkd to configure bond mode
during creation via persistent conf. Mode can be configured
with conf param 'Mode'. A new section Bond is added to the
conf to support bond mode.

These modes can be configured now.

balance-rr
active-backup
balance-xor
broadcast
802.3ad
balance-tlb
balance-alb

Example conf file: test-bond.conf
[NetDev]
Name=bond1
Kind=bond

[Bond]
Mode=balance-xor

Test case:
1. start networkd service:

12: bond1: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc
noqueue state UNKNOWN mode DEFAULT group default
link/ether 22:89:6c:47:23:d2 brd ff:ff:ff:ff:ff:ff

2. find bond mode:

cat /proc/net/bonding/bond1
    Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
    Bonding Mode: load balancing (xor)
    Transmit Hash Policy: layer2 (0)
    MII Status: up
    MII Polling Interval (ms): 0
    Up Delay (ms): 0
    Down Delay (ms): 0

Changes:
       1. Added file networkd-bond.c
       2. Bond mode enum BondMode
       3. conf section [Bond]

[tomegun: whitespace]
2014-07-07 21:52:01 +02:00
Tom Gundersen
54f601debc man: netdev - mention tun and tap
Reported by Moviuro <moviuro@gmail.com>
2014-07-04 01:26:58 +02:00
Tom Gundersen
ffd488e272 networkd: tuntap - default to no packet information
Susant says:
> ip tuntap turns this off by default.

Let's follow ip(8) here as that should be the least surprising.
2014-07-03 12:19:26 +02:00
Tom Gundersen
72d33d99c5 networkd: tuntap - manpage fixes 2014-07-03 11:37:54 +02:00
Susant Sahani
30ae9dfda3 networkd: Introduce tun/tap device
This patch introduces TUN/TAP device creation support
to networkd.

Example conf to create a tap device:

file: tap.netdev
------------------
[NetDev]
Name=tap-test
Kind=tap

[Tap]
OneQueue=true
MultiQueue=true
PacketInfo=true
User=sus
Group=sus
------------------

Test:
1. output of ip link
tap-test: tap pi one_queue UNKNOWN_FLAGS:900 user 1000 group 1000

id:
uid=1000(sus) gid=10(wheel) groups=10(wheel),1000(sus)
context=unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023

Modifications:

Added:
1. file networkd-tuntap.c
3. netdev kind NETDEV_KIND_TUN and NETDEV_KIND_TAP
2. Tun and Tap Sections and config params to parse
   conf and gperf conf parameters

[tomegun: tweak the 'kind' checking for received ifindex]
2014-07-03 11:00:02 +02:00
Tom Gundersen
9e358851b4 networkd: netdev - add dummy support 2014-07-01 22:10:07 +02:00
Tom Gundersen
b35a290960 man: bring systemd.netdev(5) up-to-date
Based on a diff by the mysterious 'poma'.
2014-07-01 21:49:53 +02:00
Lennart Poettering
102bd40e1e man: split systemd.network(5) and related into various sections for better readability 2014-06-27 20:50:08 +02:00
poma
f47c5c47d1 man: networkd - additional examples related to bridging 2014-03-17 21:35:28 +01:00
Tom Gundersen
fe6b2d55bc networkd: add basic support for MACVLANs 2014-02-25 21:19:08 +01:00
Tom Gundersen
eac684ef1c man: split out systemd.net{work,dev}(5) from systemd-networkd(8) 2014-02-25 19:30:40 +01:00