IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
It appears that exceptional layout of legacy device requires extra care of
hwdb entry for node device since Linux FireWire subsystem do not pick up
numeric model identifier in vendor directory. In detail, see:
* https://github.com/systemd/systemd/issues/25029
In the case, udev rule without model attribute is used. Thus hwdb entry
for generic AV/C device should match both cases with and without the
attribute. The wildcard added by a commit 5e577da5f8 ("hwdb: drop model
specifier from general entries") satisfies this condition,
This commit adds comment about it.
It appeared that Sony DCR-TRV310 has legacy layout of configuration ROM
against 1394 TA standard documentation.
* https://github.com/systemd/systemd/issues/25029
For the case, numeric model identifier and descriptor leaf for model name
are not picked up. This commit fulfill corresponding entry so that
applications can use model name from hardware database.
Add new key mappings for the HP Elite Dragonfly G2 laptop:
1. Map Fn+F12 (HP Programmable Key) to prog1.
2. Unmap Fn+F11 (Airplane mode) from atkbd and Intel HID events, as this
key is also reported by HP Wireless hotkeys.
* Add special keyboard combos for Thinkpad P1 Gen 3
These are based on the key codes I've found with evtest. See issue
https://github.com/systemd/systemd/issues/24814 for more details.
I'm not entirely sure what some of these keys are supposed to do,
notably Fn+RShift; this doesn't seem to do anything in Windows on
my machine. Binding them to prog# makes them available to desktop
managers' key bindings at least, in case someone wishes to make
use of this extra keybind possibility.
As usual, it seems to be mostly additions and corrections. Sadly, it seems a
bit of mojibake has crept in in various places. But it's hard to correct, in
particular because it's hard to detect all cases automatically. I think we can
ignore this for now.
When I run this a few weeks ago, ma-large.txt was gutted and 20-OUI.hwdb was
siginificantly smaller. For whatever reasons, it's back to normal now.
The Acer Aspire One AOD270 and the same hardware rebranded as
Packard Bell Dot SC need a couple of keymap fixups:
1. The switch-video-mode key does not do anything. Standard acer-wmi
maps scancode 0x61 to KEY_IGNORE since typically these events are
duplicate with the ACPI video bus. But on these models the ACPI video
bus does not send events for this key, so map it.
2. The Brightness up / down hotkeys send atkbd scancode 0xce / 0xef
which by default are mapped to KEY_KPPLUSMINUS and KEY_MACRO.
These actually are duplicate events with the ACPI video bus,
so map these to KEY_IGNORE.
The key doesn't create a release event. This is a fix to make it work properly. I made sure the product is generic to work on all Victus laptops.
This fix#23006.
This adds support for Fn+PrtSc on my Lenovo Thinkpad Extreme gen 2. Judging by the picture on the key, it should probably instead of prog2 be "selective_screenshot" (that is a possible value from judging this list e18d950ce5/keynames.txt ) but that does not register with evtest at all. With this change, evtest reports:
```
Event: time 1661081631.027773, type 1 (EV_KEY), code 149 (KEY_PROG2), value 1
Event: time 1661081631.027773, -------------- SYN_REPORT ------------
Event: time 1661081631.027886, type 1 (EV_KEY), code 149 (KEY_PROG2), value 0
Event: time 1661081631.027886, -------------- SYN_REPORT ------------
```
I am not sure if systemd is the right place to add this, if not, please refer me somewhere else.
This fixes the discrepancies in the coordinate ranges for the touchpad, touchpad in this device(NS13A2) is generic and the same one is used in most models.
The base-mounted accelerometer on Chromebooks return values same as the
display when the lid angle is 180 degrees, instead of when the lid is
closed. To match userspace expectations we must further rotate the
existing accelerometer mounting matrix by 180 degrees around the X axis:
[[-1, 0, 0], [[ 1, 0, 0], [[-1, 0, 0],
[ 0, -1, 0], X [ 0, -1, 0], = [ 0, 1, 0],
[ 0, 0, -1]] [ 0, 0, -1]] [ 0, 0, 1]]
A previous commit lets us distinguish between the two cros-ec-accel
devices on these boards by their 'label' sysfs file. Add hwdb entries
that make base-mounted accelerometers use this correct matrix, and
display-mounted ones use the existing one.
Note that the cros-ec-accel drivers use 'label' only since Linux v6.0.
The old match strings are not removed to support older kernels, even
though they are only correct for the display-mounted sensor.
The IIO subsystem exposes a 'label' sysfs file to help userspace better
identify its devices [1]. Standardized labels include the sensor type
along with its location, including 'accel-base' and 'accel-display'.
Most Chrome OS boards have two accelerometers that are indistinguishable
except for this label (or a 'location' sysfs file before Linux v6.0),
and need different mounting matrix corrections based on their location.
Add a udev rule that matches hwdb entries using this label, so we can
correct both accelerometers on these devices with hwdb entries. The
existing rules and hwdb entries are not modified to keep potential
out-of-tree entries working, but new entries in this form will override
existing ones. Also add currently standardized labels to parse-hwdb.py.
[1] https://www.kernel.org/doc/Documentation/ABI/testing/sysfs-bus-iio
The cros-ec-accel and cros-ec-accel-legacy kernel modules internally
correct for the board-specific accelerometer mounting orientations.
Their sensor outputs are in a standard reference frame consistent across
different boards, so the orientation matrix already added for a number
of devices should apply to every device using cros-ec accelerometers.
The different matrix for the 'Nocturne' board seems to be an error.
Replace the existing hwdb rules for select Chromebooks with generic
rules that apply to all Chromebooks.
They're floppy disk flux readers and writers used in digital
preservation and can be broadly considered to be "analyzers" of magnetic
fluxes.
This will have the intended side-effect of giving access to the device
to users at the console, obsoleting:
https://github.com/keirf/greaseweazle/blob/master/scripts/49-greaseweazle.rules
This device implements the phone mute HID usage as a toggle switch,
where 1 indicates muted, and 0 indicates unmuted. However, for a key
event 1 indicates that the key has been pressed and 0 indicates it has
been released. This mismatch causes issues, so prevent key events from
being generated for this HID usage.
It has been shown that the autosuspend delay for this device enacted
by modem manager will race with suspend and cause system suspend
failures.
This occurred in ChromiumOS on a chromebook, but there is no reason
it won't happen in regular notebooks with the same WWAN. To avoid
the failure delay autosuspend to a frequency longer than the polling
rate used by modem manager.
Link: https://chromium-review.googlesource.com/c/chromiumos/overlays/board-overlays/+/3635003
Link: 43e76bf1bb/src/mm-iface-modem.c (L1633)
For micmute userspace handles both micmute and f20, as Xorg cannot
handle the high keycode that the micmute key has. As such, adding the
remapping means that the key will work on Xorg clients and not just when
using wayland.
Add keymappings for the Acer Aspire One AO532h netbook.
Unmap the brightnesskeys because they send duplicate key events with
the ACPI video bus key events and add a mapping for the bluetooth
on/off hotkey.
We've had this text since the beginning, but in fact the patterns must be
stable in order for people to create local hwdb entries. And we support that
and can't change the match patterns without being very careful. So let's just
drop the text.
The handling of whitespace in pyparsing is a bother. There's some
global state, and per-element state, and it's hard to get a handle on
things. With python3-pyparsing-2.4.7-10.fc36.noarch the grammar would
not match. After handling of tabs was fixed to not accept duplicate tabs,
the grammar passes.
It seems that the entry for usb:v8087p8087*
was generated incorrectly because we treated the interface line
(with two TABs) as a device line (with one TAB).
On the new Elite x360 2 in 1 HP laptops, the microphone mute hotkey is "Fn+F8" and
the scancode for this hotkey is 0x81, but this scancode was mapped to
fn_esc in the HP generic keymap section. To fix this problem, we add
a machine specific keymap section to add the correct keymap rule.
The Stream Deck products from Elgato are simple key pads
intended to be used as macro pads. They're popular within
the streaming community.
This commit adds all 5 Stream Deck variants available to
the AV production file.
See https://www.elgato.com/en/stream-deck
This adds support for AV production controller devices, such
as DJ tables, music-oriented key pads, and others.
The USB vendor and product IDs come from Mixxx, Ctlra, and
Ardour.
Fixes#20533
Co-developed-by: Georges Basile Stavracas Neto <georges.stavracas@gmail.com>
The brightness control key (Fn+F7 Fn+F8) and touchpad toggle key (Fn + Space) do not work on the NEC VersaPro VG-S laptop. Add the keycode to fix the problem.
The approach to use '''…'''.split() instead of a list of strings was initially
used when converting from automake because it allowed identical blocks of lines
to be used for both, making the conversion easier.
But over the years we have been using normal lists more and more, especially
when there were just a few filenames listed. This converts the rest.
No functional change.
The machine has tree buttons connected to an EC that acts as a regular
AT-compatible keyboard controller. It can be either in "Windows 7" or
"Android" mode. It boots up with the earlier, but the Android build on
the tablet switches it on bootup (Windows presumably leaves it as-is).
The "Windows 7" mode, the behavior is very inconvenient: the Home button
emits multiple key presses that presumably do something in Windws 7 while
the second button toggles the RF Kill Switch in addition to producing a
scancode (it's labeled "Back" on Android version of the tablet).
The "Android" mode just sends the good ol' scan codes and this patch
handles them. On mainline Linux, the "x86-android-tablets" driver makes
sure we're in the correct mode.
Add a new database for handhelds (PDAs, calculators, etc.) that should be
accessible the seat owner.
The database is initially populated with Texas Instruments calculators
and linking cables, which removes the need to installing dedicated udev
rules for them.
The check was added in 77547d5313, but
it doesn't work as expected. Because the second part is wrapped in Optional(),
it would silently "succeed" when the lowercase digits were in the second part:
>>> from parse_hwdb import *
>>> g = 'v' + upperhex_word(4) + Optional('p' + upperhex_word(4))
>>> g.parseString('v04D8pE11C*')
(['v', '04D8', 'p', 'E11C'], {})
>>> g.parseString('v04D8pe11c*')
(['v', '04D8'], {})
The following matches are OK:
usb:v0627p0001:*QEMU USB Keyboard*
usb:v0627p0001:*
usb:v0627p0001*
usb:v0627*
The Asus TF103C misses the home button in its PNP0C40 GPIO resources
causing the button mappings for the volume buttons to be off by one,
leading to the volume-up button sending home button presses and the
volume-down button sending volume-up button presses.
Add a 60-keyboard hwdb entry to correct the mappings. Note this is
split over 2 input devices because the soc_button_array driver
creates separate input devices for power + home and vol up/down.
This is done because power/home act as wakeup buttons where as
the volume buttons do not.
This means that after this fixup the home -> volume-up button
still acts as a wakeup button, there is nothing which can be done
about this without adding a kludge to the kernel which is not
worth the trouble (IMHO).
This entry only matches on vid/pid, so the pen event node of the device
would also get assigned the ID_INPUT_TABLET_PAD property - making it
break with libinput.
On top of that, UC-Logic's tablets re-use USB ids, so now we're breaking
multiple devices this way.
To get this device tagged correctly, use libwacom which has the
per-device hwdb entries.
Fixes#17953
This reverts commit 0fbe78ac7a
Kernels >= 5.8 have added new fields to the dmi/id/modalias file in the
middle of the modalias (instead of adding them at the end).
Specifically new ":br<value>:" and (optional) ":efr<value>:" fields have
been added between the ":bd<value>:" and ":svn<value>:" fields.
Note the 5.13.0 and 5.14.0 kernels also added a new ":sku<value>:" field
between the ":pvr<value>:" and ":rvn<value>:" fields, this has been fixed
in later 5.13.y and 5.14.y releases, by moving the sku field to the end:
https://lore.kernel.org/lkml/20210831130508.14511-1-hdegoede@redhat.com/
Unfortunately the same cannot be done for the new br and efr fields since
those have been added more then a year ago and hwdb even already has some
newer entries relying on the new br field being there (and thus not working
with older kernels).
Fix the issue with the br and efr fields through the following changes:
1. Replace any matches on ":br<value>" from newer entries with an '*'
2. Replace "bd<value>:svn<value>" matches with: "bd<value>:*svn<value>"
inserting an '*' where newer kernels will have the new br + efr fields
This makes these matches working with old as well as new kernels.
Link: https://github.com/systemd/systemd/issues/20550
Link: https://github.com/systemd/systemd/pull/20562
The USB persist feature allows devices that can retain their state when
powered down to work across suspend/resume. This is in particular useful
for USB drives.
However, the persist feature can get in the way for devices that are
unable to retain their state when power is lost. An example of such
stateful devices are fingerprint readers where USB persist should be
disabled to ensure userspace can detect whether the USB device had a
power loss during system suspend.
This will initially be used by the libfprint autosuspend hwdb.
Closes: #20754
This is a related commit to the bug reported in Ubuntu:
https://bugs.launchpad.net/ubuntu/+source/systemd/+bug/1938259
This adds additional 4 models that without this param, the screen rotates
when the clamshell laptop rotates, which is an unwanted behavior.
This commit also merges entries that needs the same param.
Signed-off-by: Yao Wei (魏銘廷) <yao.wei@canonical.com>
Procotol analyzers are external devices used to capture traffic over a
wire so that it could be analysed. End-users at the console should be
able to access those devices without requiring root access.
This change obsoletes the need to install Total Phase's "Linux drivers",
which are really just udev rules and hotplug usermap files to do that:
https://www.totalphase.com/products/usb-drivers-linux/
This commit was done to add sensor rule for Hometech Wi101. Note that this rule might be too general and need fixes. I couldn't test this on any other device since this one is the only one I have.
Co-authored-by: Simeonlps <Simeonlps@users.noreply.github.com>
Signed-off-by: Wind/owZ <windowz414@gnuweeb.org>
Turns out HP is phasing out hp-wireless in new models, so we need to use
intel-hid for rfkill events.
To have best backward and forward compatibility, the solution is
implemented in userspace:
f4dbcf3d7b
The configuration ROM of Acoustic Reality eAR Master One, Eroica, Figaro,
and Ciaccona has OUI for TerraTec Electronic GmbH in its vendor ID field.
As a result, modalias for the unit is the same as Terratec Electronic
Aureon 7.1 FireWire.
Linux FireWire subsystem adds the same modalias for units of the models.
ALSA bebob driver had duplicated entries for them and was changed at
Linux kernel v5.14 to remove the duplicated entries.
It's better to improve corresponding entries in systemd hwdb, while
it's impossible to distinguish the models by modalias and force to use
the same entry for them. As last resort, this commit selects more
popular model, Aureon 7.1 FireWire for ID_VENDOR_FROM_DATABASE and
ID_MODEL_FROM_DATABASE.
Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=a07ebc7e050ccdfec508449b2ef8f2b2aa90927b
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
I had misunderstanding that BridgeCo ASIC would be used for extension
option for Mackie d.2 and OXFW971 would be used for Mackie d.2 Pro like
Mackie d.4 Pro. However, it's clear that the latter is model with
pre-installed option.
This commit fixes commit to entry for Mackie d.2. I note that the modalias
of unit of Mackie d.4 Pro is still unidentified.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Some Mackie Onyx-i models are known to have two revisions at least, which
use different ASICS; Oxford Semiconductor FW971 and TC Applied
Technologies TCD2210. I misunderstand that Onyx 1640i had not such
revisions.
This commit fixes comment to entry for the model.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Some of Phonic Firefly series and Helix Board series have the same
combination of vendor ID, model ID, specifier ID, and software
version in their configuration ROM. On the other hand, the other models
have unique combination.
ALSA bebob driver in Linux kernel v5.14 was changed in its modalias table
for the models.
This commit fixes systemd hwdb for the models.
Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=1586d461f641b60040438275e14c7dbcec5907d6
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
This graphic chip doesn't have a DRM driver and fall back to vesa-framebuffer
driver.
Without this patch, users of such chip suddenly see their GUI broken without
any indication or reason of what happened (no error message). Hence this
regression is near to impossible to troubleshoot for end users. Such case was
reported https://bugzilla.opensuse.org/show_bug.cgi?id=1187154.
Rather than adding another exception in the udev rules to deal with such
HWs, they instead get their own hwdb file '60-seat.hwdb'.
The Pinebook Pro touchpad returns a resolution data that is 2 times of
the real value, which makes libinput think the touchpad is only 1/4 the
real size.
Add a resolution override value for it, to allow libinput to calculate
the distance moved on it correctly.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Recently the kernel has gotten support for reading the mount-matrix for
BMA250 sensors represented by a BOSC0200 ACPI device from the ACPI tables,
so that we don't need to add quirks for these.
At least that was the theory. The Chuwi Hi13 (CWI534) with BMA250 sensor
has the sensor mounted such that it works / needs the normal(ized) matrix,
but the ACPI tables actually contain a wrong matrix inverting the X and Y
axis.
Add a quirk to override /sys/bus/iio/devices/iio:device?/in_mount_matrix
with the norm-matrix, since the ACPI derived matrix is actually wrong on
these devices (sigh)
Altough the Logitech website states "1000 DPI", the default DPI
settings seems to be 800 as shown by older versions of Logitech
SetPoint and verification by mouse-dpi-tool.
The old settings were all over the place contained mixed refresh rates.
The new settings are the correct default DPI settings as advertised online.
This has also been confirmed in the latest Logitech Gaming Software (9.02.65).
The atkbd device on the Lenovo Yoga 300-11IBR 2-in-1 sends unknown
keycodes when the touchpad is toggled on/off:
[ 1918.995562] atkbd serio0: Unknown key pressed (translated set 2, code 0x63 on isa0060/serio0).
[ 1918.995610] atkbd serio0: Use 'setkeycodes 63 <keycode>' to make it known.
[ 1919.032121] atkbd serio0: Unknown key released (translated set 2, code 0x63 on isa0060/serio0).
[ 1919.032135] atkbd serio0: Use 'setkeycodes 63 <keycode>' to make it known.
[ 1926.098414] atkbd serio0: Unknown key pressed (translated set 2, code 0x62 on isa0060/serio0).
[ 1926.098461] atkbd serio0: Use 'setkeycodes 62 <keycode>' to make it known.
[ 1926.146537] atkbd serio0: Unknown key released (translated set 2, code 0x62 on isa0060/serio0).
[ 1926.146583] atkbd serio0: Use 'setkeycodes 62 <keycode>' to make it known.
The "Ideapad extra buttons" driver alreadys sends f22 / f23 key-events
when the touchpad is toggles off, so map the keycodes for the duplicate
atkbd events to unknown to silence these kernel warnings.
Old meson fails with:
Element not a string: [<Holder: <ExternalProgram 'sh' -> ['/bin/sh']>>, '-c', 'test -n "$DESTDIR" || /bin/journalctl --update-catalog']
I'm doing it as a revert so that it's easy to undo the revert when we require
newer meson. The effect is not so bad, maybe a dozen or so lines about finding
'sh'.
Meson 0.58 has gotten quite bad with emitting a message every time
a quoted command is used:
Program /home/zbyszek/src/systemd-work/tools/meson-make-symlink.sh found: YES (/home/zbyszek/src/systemd-work/tools/meson-make-symlink.sh)
Program sh found: YES (/usr/bin/sh)
Program sh found: YES (/usr/bin/sh)
Program sh found: YES (/usr/bin/sh)
Program sh found: YES (/usr/bin/sh)
Program sh found: YES (/usr/bin/sh)
Program sh found: YES (/usr/bin/sh)
Program xsltproc found: YES (/usr/bin/xsltproc)
Configuring custom-entities.ent using configuration
Message: Skipping bootctl.1 because ENABLE_EFI is false
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Message: Skipping journal-remote.conf.5 because HAVE_MICROHTTPD is false
Message: Skipping journal-upload.conf.5 because HAVE_MICROHTTPD is false
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Message: Skipping loader.conf.5 because ENABLE_EFI is false
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
...
Let's suffer one message only for each command. Hopefully we can silence
even this when https://github.com/mesonbuild/meson/issues/8642 is
resolved.
- Internet specifications give 1600 DPI @ 1000Hz for this sensor
- Confirmed experimentally via `mouse-dpi-tool`
- vid, pid, and name match string from `mouse-dpi-tool`
I have also seen that VIOS LTH17 has the exact same correction and it's also a SIPODEV composite hid device also through usb. In the D330 is a detachable keyboard. It's possible that a very generic way to apply this to at least affected sipodev keyboard could be found using the device ids, but needs info to do that and ensure all sipodev keyboard with the pertinent ids need it.
Signed-off-by: David Santamaría Rogado <howl.nsp@gmail.com>
We use pvr match for efifb pitch and drm orientation quirk and in touchpad toggle keymap. Also seems most consistent with the devices here.
While at it, correct a typo, 81H3 and 81MD are product names not numbers, my bad.
Signed-off-by: David Santamaría Rogado <howl.nsp@gmail.com>
D330-10IGM has been added due the fact that 81H3 and 81MD product name belongs to the same product version. So the fact is that now that we know 81MD has the same transformation matrix that the 81H3 we can just use the product version and get rid the product name.
Signed-off-by: David Santamaría Rogado <howl.nsp@gmail.com>
In IEC 61883-1:1998, we can see some values for AV/C device with vendor
unique command set in IEC 61883-1:1998. Current udev rule handles it
for video. However it brings an issue that the functions in AV/C device
are not distinguished just by the content of configuration ROM.
In former commit, hardware database was added to describe function type
of unit in the node, then udev rules are added to utilize the database.
However, we have an request to obsolete existent udev rules by putting
enough entries to the database. It should be done carefully.
This commit adds entry into hardware database just for backward
compatibility. The entry can match to some node and unit unexpectedly.
Therefore this commit modifies existent entries to invalidate the effect
from added entry.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Typical node of AV/C device has standard content of configuration ROM.
This is defined in documentation of 1394 Trading Association.
* Configuration ROM for AV/C Devices 1.0 (Dec. 12, 2000, 1394 Trading
Association, TA Document 1999027)
However, it brings an issue that the functions in AV/C device are not
distinguished just by the content of configuration ROM.
In former commit, hardware database was added to describe function type
of unit in the node, then udev rules are added to utilize the database.
However, we have an request to obsolete existent udev rules by putting
enough entries to the database. It should be done carefully.
This commit adds entry into hardware database just for backward
compatibility. The entry can match to some node and unit unexpectedly.
Therefore this commit modifies existent entries to invalidate the effect
from added entry.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
IIDC specification describes configuration ROM without model field, thus
it's not possible to match any entry with vendor ID and model ID.
Current entry for Cool Stream iSweet can match any node and unit of
IIDC.
This commit removes the entry. I note that this model uses Texus
Instruments MC680-DCC as all-in-one chipset for video function in
IEEE 1394 bus.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Point Grey Research, inc. shipped cameras to support IIDC, however some
of them are necessarily compliant to IIDC specification in terms of the
value of software version field in unit directory of configuration ROM.
This commit adds entries for them.
Reviewed-by: Damien Douxchamps <damien@douxchamps.net>
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Instrumentation & Industrial Digital Camera (IIDC) specifications are
defined by 1394 Trading Association for camera device in IEEE 1394 bus.
IIDC2 specifications are defined by joint working group between Japan
Industrial Imaging Association (JIIA) and 1394 Trade Association as
bus-independent specification.
This commit adds entries for the specifications to remove existent udev
rules. Supported specifications are listed below:
* 1394-based Digital Camera Specification Version 1.04 (Aug. 9, 1996,
1394 Trading Association)
* 1394-based Digital Camera Specification Version 1.20 (Jul. 23, 1998,
1394 Trading Association)
* IIDC Digital Camera Control Specification Ver.1.30 (Jul. 25, 2000,
1394 Trading Association)
* IIDC Digital Camera Control Specification Ver.1.31 (Feb. 2, 2004,
1394 Trading Association, TA Document 2003017)
* IIDC Digital Camera Control Specification Ver.1.32 (Jul. 24, 2008,
1394 Trading Association, Document number 2007009)
* IIDC2 Digital Camera Control Specification Ver.1.0.0 (Jan 26th, 2012,
1394 Trading Association, TS2011001)
* IIDC2 Digital Camera Control Specification Ver.1.1.0 (May 19th, 2015,
1394 Trading Association, TS2015001)
Reviewed-by: Damien Douxchamps <damien@douxchamps.net>
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Linux kernel has firedtv kernel module as driver for Digital Everywhere
FloppyDTV and FireDTV. Although this driver works without any help of
userspace application, it's better to add entries to hardware database
for developer's convenience.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Zbigniew Jędrzejewski-Szmek points that current entries are against the
convention of indentation. It should be indented by one space instead of
two.
This commit fixes current entries according to it.
Reported-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Fixes: 1b6d9a05b1 ("hwdb: add database entries for models with ASICs in BeBoB solution")
Fixes: 0db0564e95 ("hwdb: add database entries for models with Fireworks board module")
Fixes: 38338b302c ("hwdb: add database entries for models with OXFW970/971 ASICs")
Fixes: c0d8b61f93 ("hwdb: add database entries for models based on DICE ASICs with TCAT specification")
Fixes: a774b5099b ("hwdb: add database entries for models based on DICE ASICs specialized to M-Audio")
Fixes: ff1cb7b939 ("hwdb: add database entries for models based on DICE ASICs specialized to Weiss Engineering")
Fixes: 6f44dddbe2 ("hwdb: add database entries for models based on DICE ASICs specialized by Loud Technologies")
Fixes: 49ed0aad52 ("hwdb: add database entries for models based on DICE ASICs specialized by Harman Music Group")
Fixes: effbb4024b ("hwdb: add database entries for models based on DICE ASICs specialized by Solid State Logic")
Fixes: 4aaa093b5f ("hwdb: add database entries for models of Digidesign Digi 00x family")
Fixes: c489e7f9d3 ("hwdb: add database entries for Tascam FireWire series")
Fixes: 650b8967a5 ("hwdb: add database entries for MOTU FireWire series")
Fixes: 51e9242b9b ("hwdb: add database entries for RME Fireface series")
Fixes: a90a6a9ae9 ("hwdb: add database entries for Yamaha mLAN 2nd generation")
Fixes: 41f2d0d393 ("hwdb: add database entries for Yamaha mLAN 3rd generation")
Fixes: 1d2ee96292 ("hwdb: add database entries for Focusrite Liquid Mix series")
Fixes: 0c20543835 ("hwdb: add database entries for TC Electronic PowerCore FireWire series")
Fixes: 8b4b76dc50 ("hwdb: add database entry for node with single unit with video function")
Fixes: 12dd2404be ("hwdb: add database entries for node with multiple units")
Fixes: dece0357e1 ("hwdb: add database entries for node with single unit for multiple functions")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
When given no arguments, hwdb parser script seeks test target files by
glob pattern. Although I added a new file for IEEE 1394 unit functions,
the file is excluded as test target due to the pattern.
This commit fixes it.
Fixes: 7713f3fc6a ("hwdb: add parser grammar for IEEE 1394 unit function list")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
This patch fix scancode 0x120001 mapping to key code F20 micmute
The previous scancode is not correct, it will cause the micmute
hotkey no function when testing the mic mute
Add the Sierra Wireless EM7345-LTE modem to the list of USB devices which
can safely autosuspend. This helps the processor reach deaper PC# states
when idle.
This was tested on a ThinkPad8 tablet with such a modem builtin.
Avid Adrenarine and Mojo has configuration ROM in which single unit exists
in root directory, however the unit has both video and audio functions.
For the case, it's better to distinguish from the case of composite node.
This commit adds database entries for them.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
In IEEE 1394 bus, one node can include multiple units, which represent
certain functions such as video and audio. Although it's possible to
distinguish each unit, Linux FireWire character device corresponding to
the node can not have multiple group owners, therefore it's forced to
select one of the units as representative for function.
This commit adds database entries for units belongs to the same node.
The entries are aligned to inverse order of corresponding unit order
in configuration ROM to select the first unit as the representative.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Cool Stream shipped iSweet. This model has single unit for video function.
This commit adds database entry for it as sample of node with single unit
for video.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
TC Electronic had PowerCore platform for products of digital audio signal
processing. This platform consists of NXP PowerQUICC II Processor with PCI
interface (XPC8245, MPC8245), Xilinx Spartan-II FPGA (XC2S50), and some
NXP 24-Bit Audio Digital Signal Processor (DSP56367). The products for
IEEE 1394 bus has additional TI OHCI 1.1, 1394a link layer controller
(TSB43AB23).
The content of configuration ROM has layout of standard of 1394 Trading
Association.
This commit adds database entries for the models. At present, no driver is
developed, thus this is just for convenience to developers.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Sintefex Audio Lda. designed Liquid Mix as OEM of Focusrite Audio
Engineering, Ltd. The models serve digital signal processing service via
asynchronous transaction in IEEE 1394 bus.
The content of configuration ROM is not standard of 1394 Trading
Association.
This commit adds an rule entry for the models. At present, no driver is
developed, thus this is just for convenience to developers.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
TC Applied Technologies designed DiceII ASIC to adapt to two protocols.
One of the protocol is mLAN defined by Yamaha Corporation, and another
is own protocol. The DiceII ASIC adapted to mLAN protocol was used some
products by Yamaha and its child company, Steinberg.
The content of configuration ROM for the models has completely different
layout from the one defined by 1394 Trading Association.
This commit adds an udev rule for the models. At present, no driver is
developed, thus this is just for convenience to developers.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Yamaha Corporation designed mLAN protocol based on IEEE 1394
specification. Yamaha developed specific ICs for the purpose (mLAN-NC1
and mLAN-PH2), and shipped some products with them, as well as OEM.
The content of configuration ROM is completely different from standard
layout defined by 1394 Trading Association.
This commit adds database entries for the models. At present, two vendors
are known for models with mLAN IC. At present, no driver is developed
for the models, thus this is just for convenience to developers.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
RME GmbH shipped Fireface series. The configuration ROM in the models of
series has some quirks and against standard of 1394 Trading Association.
This commit adds database entries for the models. ALSA fireface driver
supports them, but expects userspace application to control them.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Mark of the unicorn (MOTU) shipped FireWire series. The configuration ROM
in the models of series has some quirks and against standard of 1394
Trading Association.
This commit adds database entries for the models. ALSA firewire-motu driver
supports them, but expects userspace application to control them.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
TEAC Corporation shipped FireWire series in its TASCAM brand. The
configuration ROM in the models of series has some quirks and against
standard of 1394 Trading Association.
This commit adds database entries for the models. ALSA firewire-tascam
driver supports them, but expects userspace application to control them.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Avid Audio shipped Digi 00x family in its Digidesign brand. The
configuration ROM in the models of family has some quirks and against
standard of 1394 Trading Association.
This commit adds database entries for the model. ALSA firewire-digi00x
driver supports them, but expects userspace application to control them.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Solid State Logic, Ltd. shipped some models based on DICE ASICs. The
content of configuration ROM has a quirk that the value of category
field is unique (0x51 or 0x52).
This commit adds database entries for the models. ALSA dice driver supports
them, but expects userspace application to control them.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Harman International Industries, Inc. shipped some models based on DICE
ASICs in its Lexicon brand. The content of configuration ROM has a quirk
that the value of category field is unique (0x20).
This commit adds database entries for the models. ALSA dice driver supports
them, but expects userspace application to control them.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
LOUD Audio, LLC (formerly known as LOUD Technologies, Inc.) shipped some
models based on DICE ASICs in its Mackie brand. The content of
configuration ROM has a quirk that the value of category field is unique
(0x10).
This commit adds database entries for the models. ALSA dice driver supports
them, but expects userspace application to control them.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Weiss Engineering Ltd. shipped some models based on DICE ASICs. The
content of configuration ROM has a quirk that the value of category
field is unique (0x00).
This commit adds database entries for the models. ALSA dice driver supports
them, but expects userspace application to control them.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
M-Audio shipped some models based on DICE ASICs. The content of
configuration ROM has a quirk that the value of version field in unit
directory is different from the one in TCAT specification (0x000001).
This commit adds database entries for the models. ALSA dice driver supports
them, but expects userspace application to control them.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
TC Applied Technologies designed the series of ASIC for audio and music
data transmission in several types of communication bus. It's named as
Digital Interface Communication Engine (DICE). Four ASICs are known in
the series for IEEE 1394 bus; Dice II, TCD2210 (Dice Jr.), TCD2220 (Dice
Mini), and TCD3070 (DiceIII).
The content of configuration ROM in products based on DICE ASICs is
known against specification defined by 1394 Trading Association.
This commit adds database entries for models without any customization by
vendors. In TCAT specification, The value of GUID field is split to four
parts; 24-bit OUI, 8-bit category, 10-bit product ID, and 22-bit serial
number in the order. In the specification, the value of category field is
fixed to 0x04. The root directory includes leaf entries for vendor and
model names. Although the specifier_id field in unit directory differs
depending on vendors, the version field in unit directory is fixed to
0x000001. ALSA dice driver supports them, but expects userspace
application to control them.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Once Oxford Semiconductor designed FW970 and FW971 ASICs as Multi-Channel
Isochronous Streaming FireWire Audio Controller. Some vendors used them
in their products for audio and music units.
The content of configuration ROM has standard layout of 1394 Trading
Association with an additional Dependent Information directory.
This commit adds database entries for the known models. ALSA oxfw
driver supports them, but expects userspace application to control them.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Echo Audio Corporation designed Fireworks board module. The module is used
by several vendors for models.
The content of configuration ROM in the models s some quirks and against
standard of 1394 Trading Association.
This commit adds database entries for the model. ALSA fireworks driver
supports them but expects userspace application to control them.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
ArchWave AG, formerly known as BridgeCo. AG, designed DM1000, DM1100, and
DM1500 ASICs for BridgeCo. Enhancement BreakOut Box (BeBoB) solution.
They were used for many models shipped by many vendors.
The content of configuration ROM has standard layout of 1394 Trading
Association with an additional Dependent Information directory.
This commit adds database entries for the known models. ALSA bebob
driver supports them, but expects userspace application to control them.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Although in IEEE 1394 unit function list I have a plan to use slash sign
in name of property, current implementation of parser doesn't allow it.
When parsing current entries in database excluded from parser testing, we
can find usage of slash sign in name of property.
This commit adds slash sign in allow list of the parser for my
convenience.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
In added IEEE 1394 unit function list, I use custom key to detect unit
entries in node context. Although the list is not widely used in the most
of systemd users, I would like to add parser grammar for testing, by
borrowing a bit time in builders.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Current udev rules configures group owner of firewire character device
to video group, corresponding to nodes in IEEE 1394 in below cases:
1.the node with any unit for any minor version of IIDC version 1
specification defined by 1394 Trading Association
2.the node with any unit for specification defined by Point Grey Research
3.the node with any unit for AV/C device v1.0 defined by 1394 Trading
Association
4.the node with any unit for vendor-unique protocol defined by 1394
Trading Association
Nevertheless, case 3 and 4 can cover the node with any unit for audio
function as well. In the cases, it's convenient to assign audio group.
Additionally, some nodes are known to have layout different from
the specification defined by 1394 Trading Association. In the case,
it's required to add rules specific to them.
Furthermore, some nodes have no fields for vendor name and model name in
configuration ROM. In the case, it's required to add entries to hardware
database for users convenience.
For the above reasons, this commit adds rules to use information in
hardware database for known units in IEEE 1394. One database entry
corresponds to one unit. Two types of key are used to match the unit;
customized key from node context, kernel modalias of unit context.
The entry has the type of function, at least. Supplementally, it has
vendor and model names.
For your information, below statements with Python pyparsing module are
expected to parse all of the custom key and module alias in the list:
```
subsystem_prefix = pp.Literal('ieee1394:').suppress()
hex_to_int = lambda a: int(a[0], 16)
node_prefix = pp.Literal('node:').suppress()
prefixed_lower_hex = pp.Combine(pp.Literal('0x') + pp.Word(pp.srange('[a-z0-9]'), exact=6)).setParseAction(hex_to_int)
ven_in_node = pp.dictOf(pp.Literal('ven'), prefixed_lower_hex)
mo_in_node = pp.dictOf(pp.Literal('mo'), prefixed_lower_hex)
unit_in_node = pp.Group(prefixed_lower_hex + pp.Literal(':').suppress() + prefixed_lower_hex)
units_in_node = pp.Group(pp.Literal('units') + pp.ZeroOrMore(pp.Literal('*')).suppress() + unit_in_node + pp.ZeroOrMore(pp.Literal('*')).suppress())
node_parser = subsystem_prefix + node_prefix + ven_in_node + pp.Optional(mo_in_node) + units_in_node
higher_hex = pp.Word(pp.srange('[A-Z0-9]'), exact=8).setParseAction(hex_to_int)
ven_in_unit = pp.dictOf(pp.Literal('ven'), higher_hex)
mo_literal_in_unit = pp.dictOf(pp.Literal('mo'), higher_hex)
mo_in_unit = pp.dictOf(pp.Literal('mo'), higher_hex ^ pp.Literal('*'))
sp_in_unit = pp.dictOf(pp.Literal('sp'), higher_hex)
ver_in_unit = pp.dictOf(pp.Literal('ver'), higher_hex)
unit_parser = subsystem_prefix + ven_in_unit + mo_in_unit + sp_in_unit + ver_in_unit
key_parser = node_parser ^ unit_parser
```
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
