IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Allow defining the default keymap to be used by
vconsole-setup through a build option. A template
vconsole.conf also gets populated by tmpfiles if
it doesn't exist.
This will warn if fake flexible arrays are re-introduced. I'm not using
-Werror=… because we may still get warnings when compiling against old kernel
headers. We can crank this up to error later.
-fstrict-flex-arrays means that the compiler doesn't have to assume that any
trailing array is a flex array. I.e. unless the array is declared without a
specified size, only indices in the declared range are valid.
-Warray-bounds turns on the warnings about out-of-bounds array accesses.
-Warray-bounds=2 does some more warnings, with higher false positive rate. But
it doesn't seem to yield any false positives in our codebase, so enable it.
clang supports -Warray-bounds, but not -Warray-bounds=2.
gcc supports both.
gcc-13 supports -fstrict-flex-arrays.
See https://people.kernel.org/kees/bounded-flexible-arrays-in-c for a long
discussion of use in the kernel.
Config options are -Ddefault-timeout-sec= and -Ddefault-user-timeout-sec=.
Existing -Dupdate-helper-user-timeout= is renamed to -Dupdate-helper-user-timeout-sec=
for consistency. All three options take an integer value in seconds. The
renaming and type-change of the option is a small compat break, but it's just
at compile time and result in a clear error message. I also doubt that anyone was
actually using the option.
This commit separates the user manager timeouts, but keeps them unchanged at 90 s.
The timeout for the user manager is set to 4/3*user-timeout, which means that it
is still 120 s.
Fedora wants to experiment with lower timeouts, but doing this via a patch would
be annoying and more work than necessary. Let's make this easy to configure.
The unlink command removes an entry from the ESP including
referenced files that are not referenced in other entries. That is
useful eg to have multiple entries that use the same kernel with
different options.
The cleanup command removes all files that are not referenced by any
entry.
These options allow measuring the volume key used for unlocking the
volume to a TPM2 PCR. This is ideally used for the volume key of the
root file system and can then be used to bind other resources to the
root file system volume in a secure way.
See: #24503
We converted to not using #ifdef for most of our defines because the syntax is
nicer and we are protected against typos and can set -Werror=undef. Let's do
the same for SD_BOOT. The define is nicely hidden in build.h for normal builds,
and for EFI builds we were already setting SD_BOOT on the commandline.
Some gymnastics were needed to import ukify as a module. Before the file
was templated, this was trivial: insert the directory in sys.path, call import.
But it's a real pain to import the unsuffixed file after processing. Instead,
the untemplated file is imported, which works well enough for tests and is
very simple.
The tests can be called via pytest:
PATH=build/:$PATH pytest -v src/ukify/test/test_ukify.py
or directly:
PATH=build/:$PATH src/ukify/test/test_ukify.py
or via the meson test machinery output:
meson test -C build test-ukify -v
or without verbose output:
meson test -C build test-ukify
Zekret files are obfuscated using base64.
The option is added because we have a similar one for kernel-install. This
program requires python, and some people might want to skip it because of this.
The tool is installed in /usr/lib/systemd for now, since the interface might
change.
A template file is used, but there is no .in suffix.
The problem is that we'll later want to import the file as a module
for tests, but recent Python versions make it annoyingly hard to import
a module from a file without a .py suffix. imp.load_sources() works, but it
is deprecated and throws warnings.
importlib.machinery.SourceFileLoader().load_module() works, but is also
deprecated. And the documented replacements are a maze of twisted little
callbacks that result in an empty module.
So let's take the easy way out, and skip the suffix which makes it easy
to import the template as a module after adding the directory to sys.path.
I'd like to use this as a basis for an exitrd:
When compiled with -Dstandalone-binaries=true -Db_lto=true -Dbuildtype=release,
the new file is 800k. It's more than I'd like, but still quite a bit less
than libsystemd-shared.so, which is 3800k.
systemd-cryptenroll complains (but succeeds!) upon binding to a signed PCR
policy:
$ systemd-cryptenroll --unlock-key-file=/tmp/passphrase --tpm2-device=auto
--tpm2-public-key=... --tpm2-signature=..." /tmp/tmp.img
ERROR:esys:src/tss2-esys/esys_iutil.c:394:iesys_handle_to_tpm_handle() Error: Esys invalid ESAPI handle (40000001).
WARNING:esys:src/tss2-esys/esys_iutil.c:415:iesys_is_platform_handle() Convert handle from TPM2_RH to ESYS_TR, got: 0x40000001
ERROR:esys:src/tss2-esys/esys_iutil.c:394:iesys_handle_to_tpm_handle() Error: Esys invalid ESAPI handle (40000001).
WARNING:esys:src/tss2-esys/esys_iutil.c:415:iesys_is_platform_handle() Convert handle from TPM2_RH to ESYS_TR, got: 0x4000000
New TPM2 token enrolled as key slot 1.
The problem seems to be that Esys_LoadExternal() function from tpm2-tss
expects a 'ESYS_TR_RH*' constant specifying the requested hierarchy and not
a 'TPM2_RH_*' one (see Esys_LoadExternal() -> Esys_LoadExternal_Async() ->
iesys_handle_to_tpm_handle() call chain).
It all works because Esys_LoadExternal_Async() falls back to using the
supplied values when iesys_handle_to_tpm_handle() fails:
r = iesys_handle_to_tpm_handle(hierarchy, &tpm_hierarchy);
if (r != TSS2_RC_SUCCESS) {
...
tpm_hierarchy = hierarchy;
}
Note, TPM2_RH_OWNER was used on purpose to support older tpm2-tss versions
(pre https://github.com/tpm2-software/tpm2-tss/pull/1531), use meson magic
to preserve compatibility.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Offline encryption can be done without mounting the luks device. For
now we still use loop devices to split out the partition we want to
write to but in a later commit we'll replace this with a regular file.
For offline encryption, we need to keep 2x the luks header size space
free at the end of the partition, so this means our encrypted partitions
will be 16M larger than before.
Due to "historical reasons" both gcc and clang treat *all* trailing
arrays members as flexible arrays, this has an evil side effect
of inhibiting bounds checks on such members as __builtin_object_size
cannot say for sure that:
struct {
...
type foo[3];
}
has a trailing foo member of fixed size rather than unspecified.
Ideally we should use -fstrict-flex-arrays as is, but we have to
tolerate kernel uapi headers that use [0] and third party libraries
written in c89 that may use [1] like curl.
Follow-up to c47511da7e.
```
archlinux_systemd_ci: In file included from ../build/src/dissect/dissect.c:15:
archlinux_systemd_ci: ../build/src/basic/build.h:4:10: fatal error: version.h: No such file or directory
archlinux_systemd_ci: 4 | #include "version.h"
archlinux_systemd_ci: | ^~~~~~~~~~~
archlinux_systemd_ci: compilation terminated.
```
```
archlinux_systemd_ci: In file included from ../build/src/journal/cat.c:13:
archlinux_systemd_ci: ../build/src/basic/build.h:4:10: fatal error: 'version.h' file not found
archlinux_systemd_ci: #include "version.h"
archlinux_systemd_ci: ^~~~~~~~~~~
archlinux_systemd_ci: 1 error generated.
```
```
archlinux_systemd_ci: In file included from ../build/src/sysext/sysext.c:10:
archlinux_systemd_ci: ../build/src/basic/build.h:4:10: fatal error: version.h: No such file or directory
archlinux_systemd_ci: 4 | #include "version.h"
archlinux_systemd_ci: | ^~~~~~~~~~~
archlinux_systemd_ci: compilation terminated.
archlinux_systemd_ci: FAILED: systemd-inhibit.p/src_login_inhibit.c.o
```
```
archlinux_systemd_ci: In file included from ../build/src/login/inhibit.c:12:
archlinux_systemd_ci: ../build/src/basic/build.h:4:10: fatal error: version.h: No such file or directory
archlinux_systemd_ci: 4 | #include "version.h"
archlinux_systemd_ci: | ^~~~~~~~~~~
archlinux_systemd_ci: compilation terminated.
```
...
version.h can be generated after compilation starts, creating a race condition
between compilation of various .c files and creation of version.h. Let's add it
as a dependency to more build targets that require version.h or build.h.
So far we played whack'a'mole by adding versiondep whenever compilation failed.
In principle any target which includes compilation (i.e. any that has .c
sources directly), could require this. I don't understand why we didn't see
more failures… But it seems reasonable to just add the dependency more widely.
In the Xen case, it's the hypervisor which manages kexec. We thus
have to ask it whether a kernel is loaded, instead of relying on
/sys/kernel/kexec_loaded.
Using fsopen()/fsconfig(), we can check if hidepid/subset are supported to
avoid the noisy logs from the kernel if they aren't supported. This works
on centos/redhat 8 as well since they've backported fsopen()/fsconfig().
Repart is growing into an important tool on its own, and users might
want to install newer versions on systems that have older systemd. Let's
make this easier by providing a standalone binary.
Related to https://github.com/systemd/mkosi/issues/1228.
