IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
The `set -e` option is incompatible with a subshell/compound command,
which is followed by || <EXPR>. In such case, the -e option is ignored
in all affected subshells/functions (see man bash(1) for command `set`).
In certain cases we might attempt to install a binary which is already
present in the test image, yet it's missing from the host system.
In such cases, let's check if the binary indeed exists in the image
before doing any other chcecks. If it does, immediately return with
success.
This was discovered during installation of
/usr/lib/systemd/systemd-bless-boot, which was not present in Ubuntu CI
(as the installed systemd was from the Ubuntu repositories), and the
binary itself was already in the image thanks to `ninja install`.
However, during extraction of binaries from the systemd service files,
another attempt to install this binary was made, which failed due to
`find_binary` being unable to find it.
Before only one comparison was allowed. Let's make this more flexible:
ConditionKernelVersion = ">=4.0" "<=4.5"
Fixes#12881.
This also fixes expressions like "ConditionKernelVersion=>" which would
evaluate as true.
job_compare return value is undefined in case the jobs have a loop
between them, so better make a test to make sure transaction cycle
detection catches it.
The test-engine Test2 tests the cycle detection when units a, b and d
all start at once
,-------------------after-----------------,
v |
a/start ---after---> d/start ---after---> b/start
Extend the test with Test11 that adds i.service which causes a and d
stop (by unordered Conflicts=) while starting b. Because stops precede
starts, we effectively eliminate the job cycle and all transaction jobs
should be applicable.
,-------------------after-----------------,
v |
a/stop <---after--- d/stop <---after--- b/start
. . ^
. . |
'. . . . . . . . . i/start ---after------'
A class was used to put some utility functions under a namespace. But then this
namespace was inherited into classes, so the namespace split was undone. Let's
just define those functions in the module namespace.
(The Utilities class with a few functions still remain, because of the
unittest-style self.assert* craziness.)
For normal shell calls, python syntax is quite verbose. We don't need to punish
ourselves like that. In some places we would fork a shell to do argument splitting
for us. We know that our arguments can be safely split on whitespace, so let's do
that ourselves in all cases, without forking a shell.
We also expect command output to be valid text, so let's always set
universal_newlines=True.
This makes things shorter and easier to read. Development is also easier because
it's possible to paste many of the commands directly to/from a shell.
Adds the resumeflags= kernel command line option to allow setting a
custom device timeout for the resume device (defaults to the same as the
root device).
In certain situations, the systemctl commands may fail (e.g. due to
missing shared libraries), but the 'script' continues and creates a
/testok file, marking the test incorrectly as passed. Let's fix this and
bail out immediately when a command exits with a non-zero exit code.
Running integration tests with ASan is somewhat tricky to begin with, as
we need to pre-load the ASan runtime DSO for certain services (like
dbus), otherwise they won't start or behave as expected. In case of gcc
this is pretty easy, as we need the runtime DSO during compilation, so
it's already present on the host system. For clang things get more
complicated, as ASan is compiled in statically by default, thus to
enable the necessary dynamic-ish behavior one needs to compile with
-shared-libasan and then correctly set LD_PRELOAD_PATH, as the runtime
libraries are not in a standard library path.
These services are likely to coredump, and we expect that but aren't
interested in the coredump. Hence let's turn off processing by setting
RLIMIT_CORE to 0/0.
This patch adds netdev ipvtap that is based on the
IP-VLAN network interface, called ipvtap. An ipvtap device can be created
in the same way as an ipvlan device, using 'kind ipvtap', and then accessed
using the tap user space interface.
Certain distributions (e.g. Arch Linux) require booting with initrd, as
they lack support for commonly used filesystems in the kernel (i.e. the
support is compiled in as modules)
The `mount` utility has an unexpected behavior when run with libasan,
causing false-positives during the integration testing.
For example, on Arch Linux with LD_PRELOAD pointing to libasan:
```
bash-5.0# mount -o remount,rw -v /
mount: /dev/sda1 mounted on /.
bash-5.0# echo $?
1
```
However:
```
bash-5.0# LD_PRELOAD= mount -o remount,rw -v /
mount: /dev/sda1 mounted on /.
bash-5.0# echo $?
0
```
Further investigation with strace shows a LeakSanitizer error:
```
bash-5.0# strace -s 512 mount -o remount,rw -v /
...
write(2, "==355==LeakSanitizer has encountered a fatal error.\n", 52) = -1 EBADF (Bad file descriptor)
write(2, "ReportFile::Write() can't output requested buffer!\n", 51) = -1 EBADF (Bad file descriptor)
exit_group(1) = ?
+++ exited with 1 +++
```
Let's workaround this by clearing the LD_PRELOAD variable for
systemd-remount-fs.service
Allow users to set the IPv4 DF bit in outgoing packets, or to inherit its
value from the IPv4 inner header. If the encapsulated protocol is IPv6 and
DF is configured to be inherited, always set it.
It makes more sense to call VXLAN ID as
1. the VXLAN Network Identifier (VNI) (or VXLAN Segment ID)
2. test-network: rename VXLAN Id to VNI
3. fuzzer: Add VXLAN VNI directive to fuzzer
The main testsuite service timeouts sporadically when waiting for
other testsuite-* units. As the test timeout is handled by
the "test executor" (test.sh), let's disable it for the service.
This should (hopefully) fix the test flakiness.
When shooting down a service with SIGABRT the user might want to have a
much longer stop timeout than on regular stops/shutdowns. Especially in
the face of short stop timeouts the time might not be sufficient to
write huge core dumps before the service is killed.
This commit adds a dedicated (Default)TimeoutAbortSec= timer that is
used when stopping a service via SIGABRT. In all other cases the
existing TimeoutStopSec= is used. The timer value is unset by default
to skip the special handling and use TimeoutStopSec= for state
'stop-watchdog' to keep the old behaviour.
If the service is in state 'stop-watchdog' and the service should be
stopped explicitly we still go to 'stop-sigterm' and re-apply the usual
TimeoutStopSec= timeout.
In cgroup v2 we have protection tunables -- currently MemoryLow and
MemoryMin (there will be more in future for other resources, too). The
design of these protection tunables requires not only intermediate
cgroups to propagate protections, but also the units at the leaf of that
resource's operation to accept it (by setting MemoryLow or MemoryMin).
This makes sense from an low-level API design perspective, but it's a
good idea to also have a higher-level abstraction that can, by default,
propagate these resources to children recursively. In this patch, this
happens by having descendants set memory.low to N if their ancestor has
DefaultMemoryLow=N -- assuming they don't set a separate MemoryLow
value.
Any affected unit can opt out of this propagation by manually setting
`MemoryLow` to some value in its unit configuration. A unit can also
stop further propagation by setting `DefaultMemoryLow=` with no
argument. This removes further propagation in the subtree, but has no
effect on the unit itself (for that, use `MemoryLow=0`).
Our use case in production is simplifying the configuration of machines
which heavily rely on memory protection tunables, but currently require
tweaking a huge number of unit files to make that a reality. This
directive makes that significantly less fragile, and decreases the risk
of misconfiguration.
After this patch is merged, I will implement DefaultMemoryMin= using the
same principles.
We had all kinds of indentation: 2 sp, 3 sp, 4 sp, 8 sp, and mixed.
4 sp was the most common, in particular the majority of scripts under test/
used that. Let's standarize on 4 sp, because many commandlines are long and
there's a lot of nesting, and with 8sp indentation less stuff fits. 4 sp
also seems to be the default indentation, so this will make it less likely
that people will mess up if they don't load the editor config. (I think people
often use vi, and vi has no support to load project-wide configuration
automatically. We distribute a .vimrc file, but it is not loaded by default,
and even the instructions in it seem to discourage its use for security
reasons.)
Also remove the few vim config lines that were left. We should either have them
on all files, or none.
Also remove some strange stuff like '#!/bin/env bash', yikes.
Media Access Control Security (MACsec) is an 802.1AE IEEE
industry-standard security technology that provides secure
communication for all traffic on Ethernet links.
MACsec provides point-to-point security on Ethernet links between
directly connected nodes and is capable of identifying and preventing
most security threats, including denial of service, intrusion,
man-in-the-middle, masquerading, passive wiretapping, and playback attacks.
Closes#5754
We would accept a message with 40k signature and spend a lot of time iterating
over the nested arrays. Let's just reject it early, as we do for !gvariant
messages.
By default the run_qemu() function enables KVM automatically
if it detects the /dev/kvm char device and if the machine is not
already a KVM one. Let's add a TEST_NO_KVM env variable to suppress
this detection.
Make the interactive debugging of (particularly QEMU) machines less
painful, by replacing the default vt220 TERM with linux one, and
by not shutting down the machine after running the test itself.
to reduce memory requirements for volume manipulation. Also,
to further improve the test performance, reduce number of PBKDF
iterations to 1000 (allowed minimum).
We'd install the service file, and then dbus-broker-launcher because it is
mentioned in ExecStart=, but not the main executable, so nothing would work.
Let's just install dbus-broker executables if found. They are small, so this
doesn't matter much, and is much easier than figuring the exact conditions
under which dbus-broker will be used instead of dbus-daemon.
Since systemd 206 the combination of systemd and mkinitcpio
causes, under certain conditions, the rootfs to be double fsck'd.
Symptoms:
```
:: performing fsck on '/dev/sda1'
systemd: clean, 3523/125488 files, 141738/501760 blocks
********************** WARNING **********************
* *
* The root device is not configured to be mounted *
* read-write! It may be fsck'd again later. *
* *
*****************************************************
<snip>
[ OK ] Started File System Check on Root Device
```
This occurs when neither 'ro' or 'rw', or only 'ro' is present
on the kernel command line. The solution is to mount the roofs
as read-write on the kernel command line, so systemd knows to not fsck
it again.
Previously, 'degraded' state is ambiguous for bonding or bridge master:
1. one or more slave interfaces does not have carrier,
2. no link local address is assigned to the master,
3. combination of the above two.
This makes the above case 1 and 3 are in the new 'degraded-carrier'
state, and makes 'degraded' state as all slaves are active but no
link local address on master.
