IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
These lines are generally out-of-date, incomplete and unnecessary. With
SPDX and git repository much more accurate and fine grained information
about licensing and authorship is available, hence let's drop the
per-file copyright notice. Of course, removing copyright lines of others
is problematic, hence this commit only removes my own lines and leaves
all others untouched. It might be nicer if sooner or later those could
go away too, making git the only and accurate source of authorship
information.
This part of the copyright blurb stems from the GPL use recommendations:
https://www.gnu.org/licenses/gpl-howto.en.html
The concept appears to originate in times where version control was per
file, instead of per tree, and was a way to glue the files together.
Ultimately, we nowadays don't live in that world anymore, and this
information is entirely useless anyway, as people are very welcome to
copy these files into any projects they like, and they shouldn't have to
change bits that are part of our copyright header for that.
hence, let's just get rid of this old cruft, and shorten our codebase a
bit.
The Linux kernel is adding support for configuring the offset
into a disk. This allows swapfiles to be more usable as users
will no longer need to set the offset on their kernel command
line.
Use this API in systemd when hibernating as well.
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
Files which are installed as-is (any .service and other unit files, .conf
files, .policy files, etc), are left as is. My assumption is that SPDX
identifiers are not yet that well known, so it's better to retain the
extended header to avoid any doubt.
I also kept any copyright lines. We can probably remove them, but it'd nice to
obtain explicit acks from all involved authors before doing that.
Suspend to Hibernate is a new sleep method that invokes suspend
for a predefined period of time before automatically waking up
and hibernating the system.
It's similar to HybridSleep however there isn't a performance
impact on every suspend cycle.
It's intended to use with systems that may have a higher power
drain in their supported suspend states to prevent battery and
data loss over an extended suspend cycle.
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
The output of processes can be gathered, and passed back to the callee.
(This commit just implements the basic functionality and tests.)
After the preparation in previous commits, the change in functionality is
relatively simple. For coding convenience, alarm is prepared *before* any
children are executed, and not before. This shouldn't matter usually, since
just forking of the children should be pretty quick. One could also argue that
this is more correct, because we will also catch the case when (for whatever
reason), forking itself is slow.
Three callback functions and three levels of serialization are used:
- from individual generator processes to the generator forker
- from the forker back to the main process
- deserialization in the main process
v2:
- replace an structure with an indexed array of callbacks
Embedding sd_id128_t's in constant strings was rather cumbersome. We had
SD_ID128_CONST_STR which returned a const char[], but it had two problems:
- it wasn't possible to statically concatanate this array with a normal string
- gcc wasn't really able to optimize this, and generated code to perform the
"conversion" at runtime.
Because of this, even our own code in coredumpctl wasn't using
SD_ID128_CONST_STR.
Add a new macro to generate a constant string: SD_ID128_MAKE_STR.
It is not as elegant as SD_ID128_CONST_STR, because it requires a repetition
of the numbers, but in practice it is more convenient to use, and allows gcc
to generate smarter code:
$ size .libs/systemd{,-logind,-journald}{.old,}
text data bss dec hex filename
1265204 149564 4808 1419576 15a938 .libs/systemd.old
1260268 149564 4808 1414640 1595f0 .libs/systemd
246805 13852 209 260866 3fb02 .libs/systemd-logind.old
240973 13852 209 255034 3e43a .libs/systemd-logind
146839 4984 34 151857 25131 .libs/systemd-journald.old
146391 4984 34 151409 24f71 .libs/systemd-journald
It is also much easier to check if a certain binary uses a certain MESSAGE_ID:
$ strings .libs/systemd.old|grep MESSAGE_ID
MESSAGE_ID=%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x
MESSAGE_ID=%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x
MESSAGE_ID=%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x
MESSAGE_ID=%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x
$ strings .libs/systemd|grep MESSAGE_ID
MESSAGE_ID=c7a787079b354eaaa9e77b371893cd27
MESSAGE_ID=b07a249cd024414a82dd00cd181378ff
MESSAGE_ID=641257651c1b4ec9a8624d7a40a9e1e7
MESSAGE_ID=de5b426a63be47a7b6ac3eaac82e2f6f
MESSAGE_ID=d34d037fff1847e6ae669a370e694725
MESSAGE_ID=7d4958e842da4a758f6c1cdc7b36dcc5
MESSAGE_ID=1dee0369c7fc4736b7099b38ecb46ee7
MESSAGE_ID=39f53479d3a045ac8e11786248231fbf
MESSAGE_ID=be02cf6855d2428ba40df7e9d022f03d
MESSAGE_ID=7b05ebc668384222baa8881179cfda54
MESSAGE_ID=9d1aaa27d60140bd96365438aad20286
There are more than enough calls doing string manipulations to deserve
its own files, hence do something about it.
This patch also sorts the #include blocks of all files that needed to be
updated, according to the sorting suggestions from CODING_STYLE. Since
pretty much every file needs our string manipulation functions this
effectively means that most files have sorted #include blocks now.
Also touches a few unrelated include files.
This also allows us to drop build.h from a ton of files, hence do so.
Since we touched the #includes of those files, let's order them properly
according to CODING_STYLE.
Merge write_string_file(), write_string_file_no_create() and
write_string_file_atomic() into write_string_file() and provide a flags mask
that allows combinations of atomic writing, newline appending and automatic
file creation. Change all users accordingly.
This patch removes includes that are not used. The removals were found with
include-what-you-use which checks if any of the symbols from a header is
in use.
Sometimes it is necessary to stop a generator from running. Either
because of a bug, or for testing, or some other reason. The only way
to do that would be to rename or chmod the generator binary, which is
inconvenient and does not survive upgrades. Allow masking and
overriding generators similarly to units and other configuration
files.
For the systemd instance, masking would be more common, rather than
overriding generators. For the user instances, it may also be useful
for users to have generators in $XDG_CONFIG_HOME to augment or
override system-wide generators.
Directories are searched according to the usual scheme (/usr/lib,
/usr/local/lib, /run, /etc), and files with the same name in higher
priority directories override files with the same name in lower
priority directories. Empty files and links to /dev/null mask a given
name.
https://bugs.freedesktop.org/show_bug.cgi?id=87230
Remove the optional sepearate opening of the directory,
it would be just too complicated with the change to
multiple directories.
Move the middle of execute_directory() to a seperate
function to make it easier to grok.
If the format string contains %m, clearly errno must have a meaningful
value, so we might as well use log_*_errno to have ERRNO= logged.
Using:
find . -name '*.[ch]' | xargs sed -r -i -e \
's/log_(debug|info|notice|warning|error|emergency)\((".*%m.*")/log_\1_errno(errno, \2/'
Plus some whitespace, linewrap, and indent adjustments.
getopt is usually good at printing out a nice error message when
commandline options are invalid. It distinguishes between an unknown
option and a known option with a missing arg. It is better to let it
do its job and not use opterr=0 unless we actually want to suppress
messages. So remove opterr=0 in the few places where it wasn't really
useful.
When an error in options is encountered, we should not print a lengthy
help() and overwhelm the user, when we know precisely what is wrong
with the commandline. In addition, since help() prints to stdout, it
should not be used except when requested with -h or --help.
Also, simplify things here and there.
As Zbigniew pointed out a new ConditionFirstBoot= appears like the nicer
way to hook in systemd-firstboot.service on first boots (those with /etc
unpopulated), so let's do this, and get rid of the generator again.
A new tool "systemd-firstboot" can be used either interactively on boot,
where it will query basic locale, timezone, hostname, root password
information and set it. Or it can be used non-interactively from the
command line when prepareing disk images for booting. When used
non-inertactively the tool can either copy settings from the host, or
take settings on the command line.
$ systemd-firstboot --root=/path/to/my/new/root --copy-locale --copy-root-password --hostname=waldi
The tool will be automatically invoked (interactively) now on first boot
if /etc is found unpopulated.
This also creates the infrastructure for generators to be notified via
an environment variable whether they are running on the first boot, or
not.
Introduce a new configuration file /etc/systemd/coredump.conf to
configure when to place coredumps in the journal and when on disk.
Since the coredumps are quite large, default to storing them only on
disk.
A new config file /etc/systemd/sleep.conf is added.
It is parsed by systemd-sleep and logind. The strings written
to /sys/power/disk and /sys/power/state can be configured.
This allows people to use different modes of suspend on
systems with broken or special hardware.
Configuration is shared between systemd-sleep and logind
to enable logind to answer the question "can the system be
put to sleep" as correctly as possible without actually
invoking the action. If the user configured systemd-sleep
to only use 'freeze', but current kernel does not support it,
logind will properly report that the system cannot be put
to sleep.
https://bugs.freedesktop.org/show_bug.cgi?id=57793https://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=commit;h=7e73c5ae6e7991a6c01f6d096ff8afaef4458c36http://lists.freedesktop.org/archives/systemd-devel/2013-February/009238.html
SYSTEM_CONFIG_FILE and USER_CONFIG_FILE defines were removed
since they were used in only a few places and with the
addition of /etc/systemd/sleep.conf it becomes easier to just
append the name of each file to the dir name.
The MESSAGE_ID=... stanza will appear in countless number of places.
It is just too long to write it out in full each time.
Incidentally, this also fixes a typo of MESSSAGE is three places.
