IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Compared to PID1 where systemd-oomd has to be the client to PID1
because PID1 is a more privileged process than systemd-oomd, systemd-oomd
is the more privileged process compared to a user manager so we have
user managers be the client whereas systemd-oomd is now the server.
The same varlink protocol is used between user managers and systemd-oomd
to deliver ManagedOOM property updates. systemd-oomd now sets up a varlink
server that user managers connect to to send ManagedOOM property updates.
We also add extra validation to make sure that non-root senders don't
send updates for cgroups they don't own.
The integration test was extended to repeat the chill/bloat test using
a user manager instead of PID1.
Pressure remains > 1% after a kill for some time and could cause
testchill to get killed. Bumping the limit from 1% to 20% should help
with this.
Fixes#20118
For most fields, the text shown by `.id` is the value that should be set
in the unit file; however, for RestrictNamespaces, it is not. Changing
this to show the actual text makes it more clear to a user what the
actual change that needs to be made to the unit file is.
Fixes#17433. Currently, if any of the validations we do before we
check start rate limiting fail, we can still enter a busy loop as
no rate limiting gets applied. A common occurence of this scenario
is path units triggering a service that fails a condition check.
To fix the issue, we simply move up start rate limiting checks to
be the first thing we do when starting a unit. To achieve this,
we add a new method to the unit vtable and implement it for the
relevant unit types so that we can do the start rate limit checks
earlier on.
This reverts commit 491b736a49.
If the _static_ linked version of busybox is installed, openSUSE doesn't need
any specific code.
A following commit will make sure that the static linked version of busybox is
installed in the busybox container.
In some cases image names are unpredictable - some orchestrators/deployment
tools like to mangle names to suit their internal formats. In these cases,
the requirement that the extension-release file matches exactly the image
name where it's contained cannot work.
Allow falling back to loading the first regular file which name starts with
'extension-release' located in /usr/lib/extension-release.d/ and tagged with
a user.extension-release.strict extended attribute with a true value, if the
one with the expected name cannot be found.
Depending on the timing, socat will either get ECONNREFUSED oder EPIPE
from systemd. The latter will cause it to exit(1) and subsequently the
test to fail.
We are not actually interested in the return code of socat though. The
test is supposed to check, whether rate limiting of a socket unit works
properly.
So ignore any failures from the socat invocation and instead check, if
test10.socket is in state "failed" with result "trigger-limit-hit" after
it has been triggered.
TriggerLimitIntervalSec= by default is set to 2s. A "sleep 10" should
give systemd enough time even on slower machines, to reach the trigger
limit.
For better readability, break the test into separate ExecStart lines.
Fixes#19154.
We still sometimes try to grep an empty strace log because strace is not
yet properly initialized. Let's make the check a bit clever and wait
until strace is attached to PID 1 by checking the `TracerPid` field in
`/proc/1/status`.
This reverts commit cb0e818f7c.
After this was merged, some design and implementation issues were discovered,
see the discussion in #18782 and #19385. They certainly can be fixed, but so
far nobody has stepped up, and we're nearing a release. Hopefully, this feature
can be merged again after a rework.
Fixes#19345.
When checking the unit state after `systemctl freeze|thaw` we can be
"too fast" and get the intermediate state (freezing/thawing) which we're
not interested in. Let's wait a bit and try to get the state again in
such cases to avoid unnecessary flakiness.
```
[ 29.390203] testsuite-38.sh[218]: + state=thawing
[ 29.390203] testsuite-38.sh[218]: + '[' thawing = running ']'
[ 29.390203] testsuite-38.sh[218]: + echo 'error: unexpected freezer state, expected: running, actual: thawing'
[ 29.390203] testsuite-38.sh[218]: error: unexpected freezer state, expected: running, actual: thawing
[ 29.390203] testsuite-38.sh[218]: + exit 1
```
test-loop-block needs to run in qemu, so we are currently not
testing it in the CI. Run it by itself in a separate job from
TEST-02-UNITTESTS to avoid slowing that suite down.
Fixes https://github.com/systemd/systemd/issues/19966
Disable it in the bionic-* CI for now, as it's affected by
the same uevent ordering issue as TEST-50-DISSECT which makes
it flaky.
In many CI runs I noticed a race where we check the "active" state a bit
too early where the unit is still in the "inactive" state, causing the
`is-failed` check to fail. Mitigate this by waiting even if the unit is
in the inactive state and introduce a "safe net" which checks whether
the unit is not restarting indefinitely or more than it should (as
described in the original issue #3166).
Example:
```
[ 5.757784] testsuite-11.sh[216]: + systemctl --no-block start fail-on-restart.service
[ 5.853657] testsuite-11.sh[222]: ++ systemctl show --value --property ActiveState fail-on-restart.service
[ 5.946044] testsuite-11.sh[216]: + active_state=inactive
[ 5.946044] testsuite-11.sh[216]: + [[ inactive == \a\c\t\i\v\a\t\i\n\g ]]
[ 5.946044] testsuite-11.sh[216]: + [[ inactive == \a\c\t\i\v\e ]]
[ 5.946044] testsuite-11.sh[216]: + systemctl is-failed fail-on-restart.service
[ 5.946816] systemd[1]: fail-on-restart.service: Passing 0 fds to service
[ 5.946913] systemd[1]: fail-on-restart.service: About to execute false
[ 5.947011] systemd[1]: fail-on-restart.service: Forked false as 228
[ 5.947093] systemd[1]: fail-on-restart.service: Changed dead -> start
[ 5.947172] systemd[1]: Starting Fail on restart...
[ 5.947272] systemd[228]: fail-on-restart.service: Executing: false
[ 5.960553] testsuite-11.sh[227]: activating
[ 5.965188] testsuite-11.sh[216]: + exit 1
[ 6.011838] systemd[1]: Received SIGCHLD from PID 228 (4).
[ 6.012510] systemd[1]: fail-on-restart.service: Main process exited, code=exited, status=1/FAILURE
[ 6.012638] systemd[1]: fail-on-restart.service: Failed with result 'exit-code'.
[ 6.012834] systemd[1]: fail-on-restart.service: Service will restart (restart setting)
[ 6.012963] systemd[1]: fail-on-restart.service: Changed running -> failed
[ 6.013081] systemd[1]: fail-on-restart.service: Unit entered failed state.
```
