IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
code in src/shared/macro.h only defined MAX/MIN in case
they were not defined previously. however the MAX/MIN
macros implemented in glibc are not of the "safe" kind but defined
as:
define MIN(a,b) (((a)<(b))?(a):(b))
define MAX(a,b) (((a)>(b))?(a):(b))
Avoid nasty side effects by using our own versions instead.
Also fix the warnings derived from this change.
[zj: - modify MAX3 macro to fix warning about _a shadowing _a,
- do bootchart/svg.c too,
- remove unused MIN3.]
gcc thinks that errno might be negative, and functions could return
something positive on error (-errno). Should not matter in practice,
but makes an -O4 build much quieter.
Distributions that never shipped upstart do not have
"telinit" in /lib/upstart/..
Defaults to /lib/upstart/telinit so there is no change
for systems existing installs.
After that functions which add matches, show_journal_by_unit
and show_journal_by_user_unit, become nearly identical, so
I merged them into one function.
This introduces a new static list of known attributes and their special
semantics. This means that cgroup attribute values can now be
automatically translated from user to kernel notation for command line
set settings, too.
This also adds proper support for multi-line attributes.
Occasionally people report problem with reboot/poweroff operations hanging in
the middle. One known cause is when a new transaction to start a unit is
enqueued while the shutdown is going on. The start of the unit conflicts with
the shutdown jobs, so they get cancelled. The failure case can be quite unpleasant,
becase getty and sshd may already be stopped.
Fix it by using irreversible jobs for shutdown (reboot/poweroff/...) actions.
This applies to commands like "reboot", "telinit 6", "systemctl reboot". Should
someone desire to use reversible jobs, they can say "systemctl start reboot.target".`
Add a new job mode: replace-irreversibly. Jobs enqueued using this mode
cannot be implicitly canceled by later enqueued conflicting jobs.
They can however still be canceled with an explicit "systemctl cancel"
call.
"systemctl default" should behave identically to "telinit N" (where N is the
corresponding runlevel target number), therefore it should use isolate job mode
too.
This makes 'status' behave like 'list-units':
systemctl status -> status of all units
systemctl -t error status -> status of error units
systemctl -t mount status -> etc.
systemctl list-dependencies lists all unit's dependecies and
recursively expands all subsidiary target units into a tree.
Primary purpose for this command is to show all units which are
enabled in specified target.
New file output.h with output flags and modes.
--full parameter also for cgls and loginctl.
Include 'all' parameter in flags (show_cgroup_by_path, show_cgroup,
show_cgroup_and_extra, show_cgroup_and_extra_by_spec).
get_process_cmdline with max_length == 0 will not ellipsize output.
Replace LINE_MAX with 0 in some calls of get_process_cmdline.
[zj: Default to --full when under pager for clgs.
Drop '-f' since it wasn't documented and didn't actually work.
Reindent a bit.
]
For "systemctl snapshot" it makes no sense to complete an incomplete
name with ".service" as we previously did, use ".snapshot" instead.
Also, don't bother with mount units or suchlike, we know that this must
be a snapshot and hence is the only sane way for completion.
For all other object mehtods there are already counterparts on the
manager object, as they help us reduce round-trips. So let's complete
this, and reduce complexity on the client side a bit.
As a side effect this also makes "systemctl snapshot" without arguments
work again.
Adds is-failed to join is-active and is-enabled.
I grabbed this one from the todo list. Most of the functionality was
already there for is-active. I just needed to make check_one_unit take
the states to check for as an argument instead of the hardcoded
"active" and "reloading".
is-failed will return 1 if none of the units given are failed. This is
different from is-active which will return 3 if none of the units
given are active. It returns 3 with this comment:
/* According to LSB: "program is not running" */
As that does not make sense when looking for failed units I simply
chose 1 instead.
If the path to init is not specified as an argumnt to systemctl, but
init= is given on the kernel commandline, use that.
This means the initrd does not need glue code to parse the kernel
commandline before passing on init= to systemctl.
Cc: Harald Hoyer <harald@redhat.com>
Cc: Dave Reisner <dreisner@archlinux.org>
People still don't understand what the message implies.
We have to be more verbose (or more intelligent and detect some of the
cases automatically, but that's not so easy).
https://bugzilla.redhat.com/show_bug.cgi?id=884438
If 'systemctl enable' (and friends) is run inside chroot it always
exits with a bad return code. unit_file_enable() returns the number of
symlink rules that were supposed to be created. So resetting r to 0 and
exiting gracefully should be the correct way.
Given that "journalctl -u" exists now there's no need to duplicate this
functionality in systemctl, so let's drop this, especially given that it
always felt a bit awkward to overload "-f" to both --force and --follow,
and to have continues output with a status header for this.
systemctl status -f avahi-daemon
now becomes:
journalctl -fu avahi-daemon
Which is shorter and a lot less redundant.
a) Instead of parsing the bus messages inside of selinux-access.c
simply pass everything pre-parsed in the functions
b) implement the access checking with a macro that resolves to nothing
on non-selinux builds
c) split out the selinux checks into their own sources
selinux-util.[ch]
d) this unifies the job creation code behind the D-Bus calls
Manager.StartUnit() and Unit.Start().
Among other cleanups this introduces a threshold for the size of binary
blobs we serialize as integer arrays in the JSON output. THis can be
disabled via --all.
Systemctl would always return 1, because it treated uninteresting dbus
messages ("job added") as errors. Just ignore everything apart from
interesting ("job removed") messages.
Semantics are slightly different, because before unit_name_mangle
returning NULL was ignored, and now it is reported as oom. But
unit_name_mangle only returns NULL on oom.
Note: I did s/MANAGER/SYSTEMD/ everywhere, even though it makes the
patch quite verbose. Nevertheless, keeping MANAGER prefix in some
places, and SYSTEMD prefix in others would just lead to confusion down
the road. Better to rip off the band-aid now.
This splits the JSON output mode into different modes: json and
json-pretty. The former printing one entry per line, the latter showing
JSON objects nicely indented and in multiple lines to make it easier to
read for humans.
In some cases, like wrong configuration, restarting after error
does not help, so administrator can specify statuses by RestartPreventExitStatus
which will not cause restart of a service.
Sometimes you have non-standart exit status, so this can be specified
by SuccessfulExitStatus.
this method combines the folowing dbus calls and there error handling:
dbus_message_new_method_call()
dbus_message_append_args()
dbus_connection_send_with_reply_and_block()
also a number of minor fixups and bug fixes: spelling, oom errors
that didn't print errors, not properly forwarding error codes,
few more consistency issues, et cetera
glibc/glib both use "out of memory" consistantly so maybe we should
consider that instead of this.
Eliminates one string out of a number of binaries. Also fixes extra newline
in udev/scsi_id
It made no sense, and since we are documenting the bus calls now and
want to include them in our stability promise we really should get it
cleaned up sooner, not later.
E.g. systemctl --all -t masked gives the list of masked units.
The -t/--type option is reused. This is possible because unit types
and unit load states are called differently, so it is possible to
distinguish what the user meant. Using the same option also means that
the interface is user for the user: less options to remember.
The MeeGo distribution is still a supported distribution, but
will probably not see an updated version of systemd anymore.
Most of the development is focussing on Tizen now, and the
generic support for building --with-distro=other is more than
adequate enough.
This patch removes the support as a custom configuration build
target in systemd. People who are still building this for
the MeeGo distribution should build as "other" distro.
This makes sure that
systemctl status /home
is implicitly translated to:
systemctl status /home.mount
Similar, /dev/foobar becomes dev-foobar.device.
Also, all characters that cannot be part of a unit name are implicitly
escaped.
Some users found it difficult to understand what systemctl was telling
them.
Instead of "install information" talk about "[Install] section", which
is more likely to ring a bell. And suggest that it is intentional, so
that users do not attempt to "correct" the unit files.
https://bugzilla.redhat.com/show_bug.cgi?id=817033
Use the usual indentation, bracketing style, and no assignments in ifs.
Since check_listening_sockets provides just optional hints for the user,
don't pass its DBusErrors to the caller.
Previously generated units were always placed at the end of the search
path. With this change there will be three unit dirs instead of one, to
place generated entries at the beginning, in the middle and at the end
of the search path:
beginning: for units that need to override all configuration, regardless
of user or vendor. Example use: system-update-generator uses this to
temporarily redirect default.target.
middle: for units that need to override vendor configuration, but not
vendor configuration. Example use: /etc/fstab should override vendor
supplied configuration (think /tmp), but should not override native user
configuration.
end: does not override anything but is available as well. Possible usage
might be to convert D-Bus bus service files to native units but allowing
vendor supplied native units to win.
UnitPath= is also writable via native units and may be used by generators
to clarify from which file a unit is generated. This patch also hooks up
the cryptsetup and fstab generators to set UnitPath= accordingly.
This should help making the boot process a bit easier to explore and
understand for the administrator. The simple idea is that "systemctl
status" now shows a link to documentation alongside the other status and
decriptionary information of a service.
This patch adds the necessary fields to all our shipped units if we have
proper documentation for them.
systemctl called LoadUnit, GetUnit, GetAll in this order to get the properties.
It is useless to load units explicitly, because it won't ensure anything. The
unit may be freed immediately by the garbage collector.
It is unnecessary to call GetUnit, because systemctl can easily translate the
unit name to DBus path by itself.
GetAll will load the unit if necessary.
In some cases the main/control PID of a service can be outside of the
services cgroups (for example, if logind readjusts the processes'
cgroup). In order to clarify this for the user show the main/control PID
in the cgroup tree nonetheless, but mark them specially.
