IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Heavily inspired by #15622. This adds:
systemctl service-log-level systemd-resolved
systemctl service-log-level systemd-resolved info
systemctl service-log-target systemd-resolved
systemctl service-log-target systemd-resolved console
We already have systemctl verbs log-level, log-target, and service-watchdogs.
Those two new verbs tie nicely into this scheme.
The list was rather ad hoc, with "reset-failed" sandwiched between
"help" and "list-dependencies". Since a person will usually either want
to introspect state in various ways or modify state in a certain way, let's
put all the introspection commands together and all the ones that actually
have an effect second.
Let's document the discrepancy between the Sec and USec suffixing of
unit files and D-Bus properties at three places: in "systemctl show"
(where it already was briefly mentioned), in the D-Bus interface
description (at one place at least, i.e. the most prominent of
properties that encapsulate time values, there are many more) and in the
general man page explaining time values.
By documenting this at all three places I think we now do as much as we
can do about this highlighting the discrepancy of the naming and the
reasons behind it.
Fixes: #2047
Timestamps for unit start/stop are recorded with microsecond granularity,
but status and show truncate to second granularity by default.
Add a --timestamp=pretty|us|utc option to allow including the microseconds
or to use the UTC TZ to all timestamps printed by systemctl.
For users, the square brackets already serve as markup and clearly delineate
the section name from surrounding text. Putting additional markup around that
only adds clutter. Also, we were very inconsistent in using the quotes. Let's
just drop them altogether.
For units which are aliases of other units, reporting preset status as
"enabled" is rather misleading. For example, dbus.service is an alias of
dbus-broker.service. In list-unit-files we'd show both as "enabled". In
particular, systemctl preset ignores aliases, so showing any preset status at
all is always going to be misleading. Let's introduce a new state "alias" and
use that for all aliases.
I was trying to avoid adding a new state, to keep compatibility with previous
behaviour, but for alias unit files it simply doesn't seem very useful to show
any of the existing states. It seems that the clearly showing that those are
aliases for other units will be easiest to understand for users.
With cgroup v2 the cgroup freezer is implemented as a cgroup
attribute called cgroup.freeze. cgroup can be frozen by writing "1"
to the file and kernel will send us a notification through
"cgroup.events" after the operation is finished and processes in the
cgroup entered quiescent state, i.e. they are not scheduled to
run. Writing "0" to the attribute file does the inverse and process
execution is resumed.
This commit exposes above low-level functionality through systemd's DBus
API. Each unit type must provide specialized implementation for these
methods, otherwise, we return an error. So far only service, scope, and
slice unit types provide the support. It is possible to check if a
given unit has the support using CanFreeze() DBus property.
Note that DBus API has a synchronous behavior and we dispatch the reply
to freeze/thaw requests only after the kernel has notified us that
requested operation was completed.
This is useful to raise the log level for a single transaction or a few,
without affecting other state of the resolved as a restart would.
The log level can only be set, I didn't bother with having the ability
to restore the original as in pid1.
In those two pages, we need to include individual entries with xi:include to
merge the list less-variables.xml with the other entries, which is obviously
error prone. All variables are supported in both tools so add them.
This copies the commands log-level and log-target (to query and set the current
settings) from systemd-analyze to systemctl, essentially reverting
a65615ca5d. Controllling the log level settings
of the manager is basic functionality, that should be available even if
systemd-analyze (which is more of an analysis tool) is not installed. This is
like dmesg and journalctl, which should be available even if a debugger and
more advanced tools to analyze the kernel are not available. (Note that dmesg
is used to control the log level too, not just to browse the kernel logs.)
I chose to copy&paste the methods from analyze.c to the new location. There
isn't enough code to share, because acquire_bus() in both places has a
different signature despite the same name, so the only part that is common
is the invocation of sd_bus_set_property().
For executables which take a verb, we should list the verbs first, and
then options which modify those verbs second. The general layout of
the man page is from general description to specific details, usually
Overview, Commands, Options, Return Value, Examples, References.
The "include" files had type "book" for some raeason. I don't think this
is meaningful. Let's just use the same everywhere.
$ perl -i -0pe 's^..DOCTYPE (book|refentry) PUBLIC "-//OASIS//DTD DocBook XML V4.[25]//EN"\s+"http^<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN"\n "http^gms' man/*.xml
No need to waste space, and uniformity is good.
$ perl -i -0pe 's|\n+<!--\s*SPDX-License-Identifier: LGPL-2.1..\s*-->|\n<!-- SPDX-License-Identifier: LGPL-2.1+ -->|gms' man/*.xml
(This also removes support for booting into the EFI firmware setup
without logind. That's because otherwise the non-EFI fallback logind
implements can't work.)
Fixes: #9896
Based on the journalctl documentation of this option added in 23ad99b519
(#10527), but with the first reference to “fields” replaced by “journal
messages”, since I think it’s less common to show other fields with
`systemctl status` (though it’s possible with the `-o` option).
Having systemctl disable/unmask remove all symlinks in /etc and /run is
unintuitive and breaks existing use cases.
systemctl should behave symmetrically.
A "systemctl --runtime unmask" should undo a "systemctl --runtime mask"
action.
Say you have a service, which was masked by the admin in /etc.
If you temporarily want to mask the execution of the service (say in a
script), you'd create a runtime mask via "systemctl --runtime mask".
It is is now no longer possible to undo this temporary mask without
nuking the admin changes, unless you start rm'ing files manually.
While it is useful to be able to remove all enablement/mask symlinks in
one go, this should be done via a separate command line switch, like
"systemctl --all unmask".
This reverts commit 4910b35078.
Fixes: #9393
The term “positive” is often read to exclude 0 (though “strictly
positive” is sometimes used to clarify this), so let’s explicitly state
that --lines=0 is legal and completely disables journal output.
Motivated by an answer on StackExchange [1].
[1]: https://unix.stackexchange.com/a/475068/44049
This makes it possible to wait until boot is finished without having to poll
for this command repeatedly, instead using the syntax:
$ systemctl is-system-running --wait
Waiting is implemented by waiting for the StartupFinished signal to be posted
on the bus.
Register the matcher before checking for the property to avoid race conditions.
Tested by artificially delaying startup with a oneshot service and calling this
command, checked that it emitted `running` and exited with a 0 return code as
soon as the delay service completed startup.
Also tested that booting to degraded state unblocks the command.
Inserted a delay between getting the property and waiting for the signal and
confirmed this seems to work free of race conditions.
Updated the --help text (under --wait) and the man page to document the new
feature.
Docbook styles required those to be present, even though the templates that we
use did not show those names anywhere. But something changed semi-recently (I
would suspect docbook templates, but there was only a minor version bump in
recent years, and the changelog does not suggest anything related), and builds
now work without those entries. Let's drop this dead weight.
Tested with F26-F29, debian unstable.
$ perl -i -0pe 's/\s*<authorgroup>.*<.authorgroup>//gms' man/*xml
These lines are generally out-of-date, incomplete and unnecessary. With
SPDX and git repository much more accurate and fine grained information
about licensing and authorship is available, hence let's drop the
per-file copyright notice. Of course, removing copyright lines of others
is problematic, hence this commit only removes my own lines and leaves
all others untouched. It might be nicer if sooner or later those could
go away too, making git the only and accurate source of authorship
information.
This part of the copyright blurb stems from the GPL use recommendations:
https://www.gnu.org/licenses/gpl-howto.en.html
The concept appears to originate in times where version control was per
file, instead of per tree, and was a way to glue the files together.
Ultimately, we nowadays don't live in that world anymore, and this
information is entirely useless anyway, as people are very welcome to
copy these files into any projects they like, and they shouldn't have to
change bits that are part of our copyright header for that.
hence, let's just get rid of this old cruft, and shorten our codebase a
bit.
