IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
This was an overzealous setting from commit 99894b867f. Without this,
`hostnamectl set-hostname` fails with
Could not set property: Access denied
as `sethostname()` fails with `EPERM`.
Linux can be run on a device meant to act as a USB peripheral. In order
for a machine to act as such a USB device it has to be equipped with
a UDC - USB Device Controller.
This patch adds a target reached when UDC becomes available. It can be used
for activating e.g. a service unit which composes a USB gadget with
configfs and activates it.
A follow-up for commit a8cb1dc3e0.
Commit a8cb1dc3e0 made sure that initrd-cleanup.service won't be stopped
when initrd-switch-root.target is isolated.
However even with this change, it might happen that initrd-cleanup.service
survives the switch to rootfs (since it has no ordering constraints against
initrd-switch-root.target) and is stopped right after when default.target is
isolated. This led to initrd-cleanup.service entering in failed state as it
happens when oneshot services are stopped.
This patch along with a8cb1dc3e0 should fix issue #4343.
Fixes: #4343
Currently, tmpfiles runs in two separate services at boot. /dev is
populated by systemd-tmpfiles-setup-dev.service and everything else by
systemd-tmpfiles-setup.service. The former was so far conditionalized by
CAP_SYS_MODULES. The reasoning was that the primary purpose of
populating /dev was to create device nodes based on the static device
node info exported in kernel modules through MODALIAS. And without the
privs to load kernel modules doing so is unnecessary. That thinking is
incomplete however, as there might be reason to create stuff in /dev
outside of the static modalias usecase. Thus, let's drop the
conditionalization to ensure that tmpfiles.d rules are always executed
at least once under all conditions.
Fixes: #11544
Instead of enabling it unconditionally and then using ConditionPathExists=/etc/fstab,
and possibly masking this condition if it should be enabled for auto gpt stuff,
just pull it in explicitly when required.
We already *install* those as real files since de78fa9ba0.
Meson will start to copy symlinks as-is, so we would get dangling symlinks in
/usr/lib/systemd/user/.
I considered the layout in our sources to match the layout in the installation
filesystem (i.e. creating units/system/ and moving all files from units/ to
units/system/), but that seems overkill. By using normal files for both we get
some duplication, but those files change rarely, so it's not a big downside in
practice.
Fixes#9906.
Let's simplify things and drop the logic that /var/lib/machines is setup
as auto-growing btrfs loopback file /var/lib/machines.raw.
THis was done in order to make quota available for machine management,
but quite frankly never really worked properly, as we couldn't grow the
file system in sync with its use properly. Moreover philosophically it's
problematic overriding the admin's choice of file system like this.
Let's hence drop this, and simplify things. Deleting code is a good
feeling.
Now that regular file systems provide project quota we could probably
add per-machine quota support based on that, hence the btrfs quota
argument is not that interesting anymore (though btrfs quota is a bit
more powerful as it allows recursive quota, i.e. that the machine pool
gets an overall quota in addition to per-machine quota).
Otherwise we might install the socket unit early, but the service
backing it late, and then end up in strange loops when we enter rescue
mode, because we saw an event on /dev/rfkill but really can't dispatch
it nor flush it.
Fixes: #9171
now that logind doesn't mount $XDG_RUNTIME_DIR anymore we can lock down
the service using fs namespacing (as we don't need the mount to
propagate to the host namespace anymore).
Previously, setting this option by default was problematic due to
SELinux (as this would also prohibit the transition from PID1's label to
the service's label). However, this restriction has since been lifted,
hence let's start making use of this universally in our services.
On SELinux system this change should be synchronized with a policy
update that ensures that NNP-ful transitions from init_t to service
labels is permitted.
An while we are at it: sort the settings in the unit files this touches.
This might increase the size of the change in this case, but hopefully
should result in stabler patches later on.
Fixes: #1219
I found zero references to busnames.target, using git grep "busnames".
(And we do not install using a wildcard units/*.*. There is no
busnames.target installed on my Fedora 28 system).
THis dep existed since the unit was introduced, but I cannot see what
good it would do. Hence in the interest of simplifying things, let's
drop it. If breakages appear later we can certainly revert this again.
Fixes: #10469
This is might be useful in some cases, but it's primarily an example for
a boot check service that can be plugged before boot-complete.target.
It's disabled by default.
All it does is check whether the failed unit count is zero
This is the counterpiece to the boot counting implemented in
systemd-boot: if a boot is detected as successful we mark drop the
counter again from the booted snippet or kernel image.
C.f. 287419c119: 'systemctl exit 42' can be
used to set an exit value and pulls in exit.target, which pulls in systemd-exit.service,
which calls org.fdo.Manager.Exit, which calls method_exit(), which sets the objective
to MANAGER_EXIT. Allow the same to happen through SuccessAction=exit.
v2: update for 'exit' and 'exit-force'
Explicit systemctl calls remain in systemd-halt.service and the system
systemd-exit.service. To convert systemd-halt, we'd need to add
SuccessAction=halt-force. Halting doesn't make much sense, so let's just
leave that is. systemd-exit.service will be converted in the next commit.
This updates the unit files of all our serviecs that deal with journal
stuff to use a higher RLIMIT_NOFILE soft limit by default. The new value
is the same as used for the new HIGH_RLIMIT_NOFILE we just added.
With this we ensure all code that access the journal has higher
RLIMIT_NOFILE. The code that runs as daemon via the unit files, the code
that is run from the user's command line via C code internal to the
relevant tools. In some cases this means we'll redundantly bump the
limits as there are tools run both from the command line and as service.
So far we always used "yes" instead of "true" in all our unit files,
except for one outlier. Let's do this here too. No change in behaviour
whatsoever, except that it looks prettier ;-)
I think this is a slightly cleaner approach than parsing the
configuration file at multiple places, as this way there's only a single
reload cycle for logind.conf, and that's systemd-logind.service's
runtime.
This means that logind and dbus become a requirement of
user-runtime-dir, but given that XDG_RUNTIME_DIR is not set anyway
without logind and dbus around this isn't really any limitation.
This also simplifies linking a bit as this means user-runtime-dir
doesn't have to link against any code of logind itself.
Let's not use the word "wrapper", as it's not clear what that is, and in
some way any unit file is a "wrapper"... let's simply say that it's
about the runtime directory.
If for any reason local-fs.target fails at startup while a password is
requested by systemd-cryptsetup@.service, we end up with the emergency shell
competing with systemd-ask-password-console.service for the console.
This patch makes sure that:
- systemd-ask-password-console.service is stopped before entering in emergency
mode so it won't make any access to the console while the emergency shell is
running.
- systemd-ask-password-console.path is also stopped so any attempts to restart
systemd-cryptsetup in the emergency shell won't restart
systemd-ask-password-console.service and kill the emergency shell.
- systemd-ask-password-wall.path is stopped so
systemd-ask-password-wall.service won't be started as this service pulls
the default dependencies in.
Fixes: #10131
This reverts commit d4e9e574ea.
(systemd.conf.m4 part was already reverted in 5b5d82615011b9827466b7cd5756da35627a1608.)
Together those reverts should "fix" #10025 and #10011. ("fix" is in quotes
because this doesn't really fix the underlying issue, which is combining
DynamicUser= with strict container sandbox, but it avoids the problem by not
using that feature in our default installation.)
Dynamic users don't work well if the service requires matching configuration in
other places, for example dbus policy. This is true for those three services.
In effect, distros create the user statically [1, 2]. Dynamic users make more
sense for "add-on" services where not creating the user, or more precisely,
creating the user lazily, can save resources. For "basic" services, if we are
going to create the user on package installation anyway, setting DynamicUser=
just creates unneeded confusion. The only case where it is actually used is
when somebody forgets to do system configuration. But it's better to have the
service fail cleanly in this case too. If we want to turn on some side-effect
of DynamicUser=yes for those services, we should just do that directly through
fine-grained options. By not using DynamicUser= we also avoid the need to
restart dbus.
[1] bd9bf30727
[2] 48ac1cebde/f/systemd.spec (_473)
(Fedora does not create systemd-timesync user.)
systemd-tmpfiles-setup.service needs to be ordered after
systemd-journald.service, so entries in /run/log/journal are already
created when systemd-tmpfiles tries to adjust its permissions.
This is specially problematic for setups using a volatile journal where
the initrd does not ship a machine-id (i.e. OSTree-based systems), where
logs from the initrd will be inaccessible for users in the
systemd-journal group. It also has a side effect of `journalctl --user`
failing with "No journal files were opened due to insufficient
permissions".
Fixes#10128.
We would create a useless empty directory under build/.
It seems we were lucky and all symlinks were installed into directories
which were alredy created because we installed something into the same
location earlier.
While at it, also add '-v' to 'mkdir -p'. This will print the names of
directories as they are created (just once), making it easier to see all of
what the install script is doing.
This reverts commit 48d3e88c18.
I kept the follow-symlink=false → follow-symlink=true change instact, since
we're likely to have existing installations with a symlink now.
Followup to commit 13cf422e04 ("user@.service: don't kill user manager at runlevel switch")
I think there's a general rule that units with `StopWhenUnneeded=yes` need
`IgnoreOnIsolate=yes`... But it doesn't apply to `suspend.target` and friends.
`printer.target` and friends break on isolate even if we apply the rule[1].
That just leaves `graphical-session.target`, which is a user service.
"isolate" is *mostly* a weird attempt to emulate runlevels, so I decided
not to worry about it for user services.
[1] https://github.com/systemd/systemd/issues/6505#issuecomment-320644819
Loggin in as root user and then switching the runlevel results in a
stop of the user manager, even though the user ist still logged in.
That leaves a broken user session.
Adding "IgnoreOnIsolate=true" to user@.service fixes this.
