IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
As it turns out /usr/share/selinux/devel/ is now included in more RPMs
than just selinux-policy-devel (specifically container-selinux, which is
pulled in by various container related RPMs). Let's hence tighten the
dependency check a bit and look for systemd's .if file, which is what we
actually care about.
First, ellipsize() and ellipsize_mem() should not read past the input
buffer. Those functions take an explicit length for the input data, so they
should not assume that the buffer is terminated by a nul.
Second, ellipsization was off in various cases where wide on multi-byte
characters were used.
We had some basic test for ellipsize(), but apparently it wasn't enough to
catch more serious cases.
Should fix https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=8686.
journalctl -o short would display those entries, but journalctl -o short-full
would refuse. If the entry is bad, just fall back to the receive-side realtime
timestamp like we would if it was completely missing.
We'd look for a '=' separator using memchr, i.e. ignoring any nul bytes in the
string, but then do a strndup, which would terminate on any nul byte, and then
again do a memcmp, which would access memory past the chunk allocated by strndup.
Of course, we probably shouldn't allow keys with nul bytes in them. But we
currently do, so there might be journal files like that out there. So let's fix
the journal-reading code first.
Something is wrong with the entry (probably a missing timestamp), so no point
in rotating. But suppress the error in process_source(), so that the processing
of the data stream continues.
Also, just return 0 from writer_write() on success, the only caller doesn't
care.
This corresponds nicely with the specifiers we already pass for
/var/lib, /var/cache, /run and so on.
This is particular useful to update the test-path service files to
operate without guessable files, thus allowing multiple parallel
test-path invocations to pass without issues (the idea is to set $TMPDIR
early on in the test to some private directory, and then only use the
new %T or %V specifier to refer to it).
Test the "[Bridge]" section keys
```
[Bridge]
UnicastFlood=true
HairPin=true
UseBPDU=true
FastLeave=true
AllowPortToBeRoot=true
Cost=555
Priority=23
```
```
test_bridge_init (__main__.BridgeTest) ... ok
test_bridge_port_priority (__main__.BridgeTest) ... ok
test_bridge_port_priority_set_zero (__main__.BridgeTest)
It should be possible to set the bridge port priority to 0 ... ok
test_bridge_port_property (__main__.BridgeTest)
Test the "[Bridge]" section keys ... ok
```
Yes, the output is sometimes annyoing, but /dev/null is not the right
place...
I figure this redirection was left in from some debugging session, let's
fix it, and make the setup_basic_environment invocation like in all
other test scripts.
Nested KVM is very flaky as we learnt from our CI. Hence, let's avoid
KVM whenever we detect we are already running inside of KVM.
Maybe one day nested KVM is fixed, at which point we can turn this on
again, but for now let's simply avoid nested KVM, since reliable CI is
more important than quick CI, I guess.
And yes, avoiding KVM for our qemu runs does make things substantially
slower, but I think it's not a complete loss.
Inspired by @evverx' findings in:
https://github.com/systemd/systemd/pull/8701#issuecomment-380213302
To indicate that the there're no more entries, these wrappers return false but
did leave the passed pointed unmodified.
However EOF is not an error and is a very common case so initialize the output
argument to NULL even in this case so callers don't need to do that.
Fixes: #8721
We go through the whole file system, so this test can take arbitrary time. But
this test is still quite useful, so let's at least try to make it more efficent
by not descending at all into the directories we would filter out later on
anyway.
Also increase the timeout, in case the previous step doesn't help enough.
Absolute paths make everything simple and quick, but sometimes this requirement
can be annoying. A good example is calling 'test', which will be located in
/usr/bin/ or /bin depending on the distro. The need the provide the full path
makes it harder a portable unit file in such cases.
This patch uses a fixed search path (DEFAULT_PATH which was already used as the
default value of $PATH), and if a non-absolute file name is found, it is
immediately resolved to a full path using this search path when the unit is
loaded. After that, everything behaves as if an absolute path was specified. In
particular, the executable must exist when the unit is loaded.
Files which are installed as-is (any .service and other unit files, .conf
files, .policy files, etc), are left as is. My assumption is that SPDX
identifiers are not yet that well known, so it's better to retain the
extended header to avoid any doubt.
I also kept any copyright lines. We can probably remove them, but it'd nice to
obtain explicit acks from all involved authors before doing that.
This makes the script wait for the newly created partition to
show up before trying to put a filesystem on it, which should
prevent the tests from failing with the following error:
```
New situation:
Disklabel type: dos
Disk identifier: 0x3541a0ec
Device Boot Start End Sectors Size Id Type
/dev/loop6p1 2048 800767 798720 390M 83 Linux
/dev/loop6p2 800768 819199 18432 9M 83 Linux
The partition table has been altered.
Calling ioctl() to re-read partition table.
Syncing disks.
The file /dev/loop6p1 does not exist and no size was specified.
make: *** [setup] Error 1
F: Failed to mkfs -t ext4
Makefile:4: recipe for target 'setup' failed
```
ubsan times out because we do too many allocations:
$ valgrind build/fuzz-unit-file test/fuzz-regressions/fuzz-unit-file/oss-fuzz-6977-full
...
test/fuzz-regressions/fuzz-unit-file/oss-fuzz-6977-full... ok
==1757==
==1757== HEAP SUMMARY:
==1757== in use at exit: 0 bytes in 0 blocks
==1757== total heap usage: 199,997 allocs, 199,997 frees, 90,045,318,585 bytes allocated
...
==3256== total heap usage: 100,120 allocs, 100,120 frees, 13,097,140 bytes allocated
https://oss-fuzz.com/v2/issue/4651449704251392/6977 should now be really fixed.
e3c3d6761b was the first attempt, but even with this change, e3c3d6761b
still makes sense.
With this "sudo ./run-integration-tests.sh" should work fully without
exception, even on systems lacking SELinux (in which case that test will
just be skipped)
It's always visible:
$ sudo modprobe sit
$ sudo unshare -n ip l
1: lo: <LOOPBACK> mtu 65536 qdisc noop state DOWN mode DEFAULT group default qlen 1000
...
2: sit0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN mode DEFAULT group default qlen 1000
...
grep already indicates if it matched anything by return value.
Additional advantage is then that if the test fails, the unexpected
matching lines are visible in the log output.
No need to go through the specifier_printf() if the path is already too long in
the unexpanded form (since specifiers increase the length of the string in all
practical cases).
In the oss-fuzz test case, valgrind reports:
total heap usage: 179,044 allocs, 179,044 frees, 72,687,755,703 bytes allocated
and the original config file is ~500kb. This isn't really a security issue,
since the config file has to be trusted any way, but just a matter of
preventing accidental resource exhaustion.
https://oss-fuzz.com/v2/issue/4651449704251392/6977
While at it, fix order of arguments in the neighbouring log_syntax() call.
msan doesn't understand sscanf with %ms, so it falsely reports unitialized
memory. Using sscanf with %ms is quite convenient in
socket_address_parse_netlink(), so let's just not run the fuzzer for
ListenNetlink= at all for now. If msan is fixed, we can remove this.
https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=6884
The orignal reproducer from oss-fuzz depends on the hostname (via %H and %c).
The hostname needs a dash for msan to report this, so a simpler case from
@evverx with the dash hardcoded is also added.
The issue is a false positive from msan, which does not instruct stpncpy
(https://github.com/google/sanitizers/issues/926). Let's add a work-around
until this is fixed.
We have only three bits of space, i.e. 8 possible classes. Immediately reject
anything outside of that range. Add the fuzzer test case and an additional
unit test.
oss-fuzz #6908.
We probably should allow very deep calls of our recursive functions. Let's add
a limit to avoid resource exhaustion. 240 is 10 per hour (if somebody is using
this for time based triggers...), so it should be more than enough for most use
cases, and is conveniently below the 250 stack limit in msan.
oss-fuzz #6917.
Also fix one case where the presence of a newline was used to generate
an invalid environment assignment.
Tested: with mkosi, which builds the local tree and run ninja tests.
gmtime_r() will return NULL in that case, and we would crash.
I committed the reproducer case in fuzz-regressions/, even though we don't have
ubsan hooked up yet. Let's add it anyway in case it is useful in the future. We
actually crash anyway when compiled with asserts, so this can be easily
reproduced without ubsan.
oss-fuzz #6886.
This seems to be a false positive in msan:
https://github.com/google/sanitizers/issues/767.
I don't see anything wrong with the code either, and valgrind does not see the
issue. Anyway, let's add the test case.
We don't have msan hooked up yet, but hopefully we'll in the future.
oss-fuzz #6884.
We currently have just one sanitizer for tests, asan, but we may add more in
the future. So let's keep the loop over the sanitizers in meson.build, but
just enable all regression cases under all sanitizers. If it fails under one
of them, it might fail under a different one.
In subsequent commits I'll add test cases which might not fail under asan,
but it's good to commit them for future use.
The test names are made more verbose:
256/257 fuzz-dns-packet:oss-fuzz-5465:address OK 0.04 s
257/257 fuzz-dns-packet:issue-7888:address OK 0.03 s
The unit files for test-execute are named like
`exec-(setting-name-in-lower-character)-(optional-text).service`.
However, test units for AmbientCapabilities= are not following this.
So, let's rename them for the consistency.
This does not change anything in the functionality of the test.
This PR implements the first part of RFE #8046. I.e. this allows to
write:
```
u username -:300
```
Where the uid is chosen automatically but the gid is fixed.
The nobody user/group may not synthesized by systemd.
To run tests the functionalities in such situation, this adds tests
by user/group by daemon, as it is expected to exists all environments.
A runaway string should still be returned by the code that splits on
commas, so add a '?' to the regex so that the last '"?' in a string
still produces a valid block for the split code.
Tested:
ACTION=="remove\"GOTO=""
Which then produced:
$ test/rule-syntax-check.py src/login/70-uaccess.rules
# looking at src/login/70-uaccess.rules
Invalid line src/login/70-uaccess.rules:10: ACTION=="remove\"GOTO=""
clause: ACTION=="remove\"GOTO=""
Using a regex to match the groups is smarter than the split(',') that
would break in those cases.
Tested:
SUBSYSTEM=="usb", ENV{ID_USB_INTERFACES}=="*:060101:*,*:070202:*", TAG+="uaccess"
Rule checker doesn't break there after this commit.
Add support to backslash-escaped double quote inside a string.
Tested by modifying src/login/70-uaccess.rules to include:
ACTION=="remove" it", GOTO="uaccess_end"
And had the rule checker complain about it:
$ test/rule-syntax-check.py src/login/70-uaccess.rules
# looking at src/login/70-uaccess.rules
Invalid line src/login/70-uaccess.rules:10: ACTION=="remove" it", GOTO="uaccess_end"
clause: ACTION=="remove" it"
This is true since commit 7e760b79ad.
Note that the changes in the regex expressions relies on the fact that the
script assumes that the comma separator is mandatory.
Add a comment in the script to clarify this.
In udev man page, "PROGRAM" key is part of the keys which are used for
matching purposes so it should only be used with the compare operator "==".
Actually it doesn't really make sense to assign it a value.
udev code allows both "=" and "==" for PROGRAM and both are handled the same
way but for consistencies it's better to have only the compare operator allowed
by the rule syntax checker.
No rules shipped by systemd use PROGRAM key so nothing need to be changed in
our rule files.
`nobody` is a special user, whose credentials should be extracted with
`get_user_creds`. `getpwnam` called in `test-udev.pl` is a bit different,
which causes the test to fail with the following error:
```
device '/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda' expecting node/link 'node'
expected permissions are: nobody::0600
created permissions are : 65534:0:0600
permissions: error
add: ok
remove: ok
```
The ideal fix would probably be to implement `get_user_creds` in Perl, but in this
PR the issue is simply got around by using `daemon` instead of `nobody`.
Closes https://github.com/systemd/systemd/issues/8196.
Followed PEP8 and PEP3101 rules (#8079)
Imports re-ordered by Alphabetical Standarts for following PEP8
Old type string formattings (" example %s " % exampleVar ) re-writed as new type string
formattings ( " example {} ".format(exampleVar) ) for following PEP3101
On Debian/Ubuntu systems the default passwd/group files use a
slightly strange mapping. E.g. in passwd:
```
man❌6:12::/var/cache/man:/sbin/nologin
```
and in group:
```
disk❌6:
man❌12:
```
This is not supported in systemd-sysusers right now because
sysusers will not re-use an existing uid/gid in its normal
mode of operation. Unfortunately this reuse is needed to
replicate the default Debian/Ubuntu users/groups.
This commit enforces reuse when the "uid:gid" syntax is used
to fix this.
I also added a test that replicates the Debian base-passwd
passwd/group file to ensure things are ok.
This is a bit painful because a separate build of systemd is necessary. The
tests are guarded by tests!=false and slow-tests==true. Running them is not
slow, but compilation certainly is. If this proves unwieldy, we can add a
separate option controlling those builds later.
The build for each sanitizer has its own directory, and we build all fuzzer
tests there, and then pull them out one-by-one by linking into the target
position as necessary. It would be nicer to just build the desired fuzzer, but
we need to build the whole nested build as one unit.
[I also tried making systemd and nested meson subproject. This would work
nicely, but meson does not allow that because the nested target names are the
same as the outer project names. If that is ever fixed, that would be the way
to go.]
v2:
- make sure things still work if memory sanitizer is not available
v3:
- switch to syntax which works with meson 0.42.1 found in Ubuntu
This test tests the systemd-sysuser binary via the --root=$TESTDIR
option and ensures that for the given inputs the expected passwd
and group files will be generated.
Let's be more restrictive when validating PID files and MAINPID=
messages: don't accept PIDs that make no sense, and if the configuration
source is not trusted, don't accept out-of-cgroup PIDs. A configuratin
source is considered trusted when the PID file is owned by root, or the
message was received from root.
This should lock things down a bit, in case service authors write out
PID files from unprivileged code or use NotifyAccess=all with
unprivileged code. Note that doing so was always problematic, just now
it's a bit less problematic.
When we open the PID file we'll now use the CHASE_SAFE chase_symlinks()
logic, to ensure that we won't follow an unpriviled-owned symlink to a
privileged-owned file thinking this was a valid privileged PID file,
even though it really isn't.
Fixes: #6632
same motivation as in #5816:
- distributions have scripts to rewrite shebangs on installation and
they know what locations to rely on.
- For tests/compilation we should rather rely on the user to have setup
there PATH correctly.
We need to specify a full path to the "ip" binary and busybox "ip" has a
slightly different output than the normal ip, and won't show "DOWN".
hence instead ensure that at lest not "UP" is in there.
With Type=notify services, EXTEND_TIMEOUT_USEC= messages will delay any startup/
runtime/shutdown timeouts.
A service that hasn't timed out, i.e, start time < TimeStartSec,
runtime < RuntimeMaxSec and stop time < TimeoutStopSec, may by sending
EXTEND_TIMEOUT_USEC=, allow the service to continue beyond the limit for
the execution phase (i.e TimeStartSec, RunTimeMaxSec and TimeoutStopSec).
EXTEND_TIMEOUT_USEC= must continue to be sent (in the same way as
WATCHDOG=1) within the time interval specified to continue to reprevent
the timeout from occuring.
Watchdog timeouts are also extended if a EXTEND_TIMEOUT_USEC is greater
than the remaining time on the watchdog counter.
Fixes#5868.
Since the new option `--network-namespace-path=` of systemd-nspawn
cannot be used together with other network-related options, we need
to add more smoke tests for checking these conditions of options.
Ignore mkosi.builddir. In the future we can also add other patterns
if necessary.
run-intergration-tests.sh is updated to use the new script, and modified
to work from arbitrary directory.
Follow-up for #7494.
We currently look for "nobody" and "nfsnobody" when testing groups, both
of which do not exist on Ubuntu, our main testing environment. Let's
extend the tests slightly to also use "nogroup" if it exists.
Apparently there are a myriad of netcat implementations around, and they
all behave slightly differently. The one I have on my Fedora 27
installation will cause a failure when invoked as "nc -U" on an AF_UNIX
socket whose connections are immediately disconnected, thus causing the
test to fail.
Let's avoid all ambiguities in this regard, and drop usage of netcat
altoegther. Instead let's use a FIFO in the file system, which we can
connect to with only shell commands, and is hence much simpler and
more reliable to test with.
The actual test is supposed to validate that PID 1 doesn't hang when
activation of a socket-activated service fails, hence which transport
mechanism is used ultimately doesn't matter, as long as we activate the
service, and we do here...
These tests check the stderr. So, if the systemd.log_level=debug
is set in the kernel command line, then these tests fail.
This set log_level to info in hwdb-test.sh and meson-check-help.sh,
the kernel command line not to change the output of the target
programs.
Fixes#7362.
This test runs on the unified hierarchy, and ensures that cgroup
delegation works properly, i.e. writ access is granted and the requested
controllers are enabled.
So far I avoided adding license headers to meson files, but they are pretty
big and important and should carry license headers like everything else.
I added my own copyright, even though other people modified those files too.
But this is mostly symbolic, so I hope that's OK.
