IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
We already *install* those as real files since de78fa9ba0.
Meson will start to copy symlinks as-is, so we would get dangling symlinks in
/usr/lib/systemd/user/.
I considered the layout in our sources to match the layout in the installation
filesystem (i.e. creating units/system/ and moving all files from units/ to
units/system/), but that seems overkill. By using normal files for both we get
some duplication, but those files change rarely, so it's not a big downside in
practice.
Fixes#9906.
Files which are installed as-is (any .service and other unit files, .conf
files, .policy files, etc), are left as is. My assumption is that SPDX
identifiers are not yet that well known, so it's better to retain the
extended header to avoid any doubt.
I also kept any copyright lines. We can probably remove them, but it'd nice to
obtain explicit acks from all involved authors before doing that.
Use `systemctl --user --force exit` to implement the systemd-exit
user service.
This removes our dependence on an external `kill` binary and the
concerns about whether they recognize SIGRTMIN+n by name or what their
interpretation of SIGRTMIN is.
Tested: `systemctl --user start systemd-exit.service` kills the
`systemd --user` instance for my user.
An explicit --user switch is necessary because for the user@0.service instance
systemd-tmpfiles is running as root, and we need to distinguish that from
systemd-tmpfiles running in systemd-tmpfiles*.service.
Fixes#2208.
v2:
- restore "systemd-" prefix
- add systemd-tmpfiles-clean.{service,timer}, systemd-setup.service to
systemd-tmpfiles(8)
So far I avoided adding license headers to meson files, but they are pretty
big and important and should carry license headers like everything else.
I added my own copyright, even though other people modified those files too.
But this is mostly symbolic, so I hope that's OK.
The indentation for emacs'es meson-mode is added .dir-locals.
All files are reindented automatically, using the lasest meson-mode from git.
Indentation should now be fairly consistent.
It's crucial that we can build systemd using VS2010!
... er, wait, no, that's not the official reason. We need to shed old systems
by requring python 3! Oh, no, it's something else. Maybe we need to throw out
345 years of knowlege accumulated in autotools? Whatever, this new thing is
cool and shiny, let's use it.
This is not complete, I'm throwing it out here for your amusement and critique.
- rules for sd-boot are missing. Those might be quite complicated.
- rules for tests are missing too. Those are probably quite simple and
repetitive, but there's lots of them.
- it's likely that I didn't get all the conditions right, I only tested "full"
compilation where most deps are provided and nothing is disabled.
- busname.target and all .busname units are skipped on purpose.
Otherwise, installation into $DESTDIR has the same list of files and the
autoconf install, except for .la files.
It'd be great if people had a careful look at all the library linking options.
I added stuff until things compiled, and in the end there's much less linking
then in the old system. But it seems that there's still a lot of unnecessary
deps.
meson has a `shared_module` statement, which sounds like something appropriate
for our nss and pam modules. Unfortunately, I couldn't get it to work. For the
nss modules, we need an .so version of '2', but `shared_module` disallows the
version argument. For the pam module, it also didn't work, I forgot the reason.
The handling of .m4 and .in and .m4.in files is rather awkward. It's likely
that this could be simplified. If make support is ever dropped, I think it'd
make sense to switch to a different templating system so that two different
languages and not required, which would make everything simpler yet.
v2:
- use get_pkgconfig_variable
- use sh not bash
- use add_project_arguments
v3:
- drop required:true and fix progs/prog typo
v4:
- use find_library('bz2')
- add TTY_GID definition
- define __SANE_USERSPACE_TYPES__
- use join_paths(prefix, ...) is used on all paths to make them all absolute
v5:
- replace all declare_dependency's with []
- add more conf.get guards around optional components
v6:
- drop -pipe, -Wall which are the default in meson
- use compiler.has_function() and compiler.has_header_symbol instead of the
hand-rolled checks.
- fix duplication in 'liblibsystemd' library name
- use the right .sym file for pam_systemd
- rename 'compiler' to 'cc': shorter, and more idiomatic.
v7:
- use ENABLE_ENVIRONMENT_D not HAVE_ENVIRONMENT_D
- rename prefix to prefixdir, rootprefix to rootprefixdir
("prefix" is too common of a name and too easy to overwrite by mistake)
- wrap more stuff with conf.get('ENABLE...') == 1
- use rootprefix=='/' and rootbindir as install_dir, to fix paths under
split-usr==true.
v8:
- use .split() also for src/coredump. Now everything is consistent ;)
- add rootlibdir option and use it on the libraries that require it
v9:
- indentation
v10:
- fix check for qrencode and libaudit
v11:
- unify handling of executable paths, provide options for all progs
This makes the meson build behave slightly differently than the
autoconf-based one, because we always first try to find the executable in the
filesystem, and fall back to the default. I think different handling of
loadkeys, setfont, and telinit was just a historical accident.
In addition to checking in $PATH, also check /usr/sbin/, /sbin for programs.
In Fedora $PATH includes /usr/sbin, (and /sbin is is a symlink to /usr/sbin),
but in Debian, those directories are not included in the path.
C.f. https://github.com/mesonbuild/meson/issues/1576.
- call all the options 'xxx-path' for clarity.
- sort man/rules/meson.build properly so it's stable
This was causing preset-all --global to create symlinks:
$ systemctl preset-all --global --root=/var/tmp/inst1
Created symlink /var/tmp/inst1/etc/systemd/user/shutdown.target → /usr/lib/systemd/user/../system/shutdown.target.
Created symlink /var/tmp/inst1/etc/systemd/user/sockets.target → /usr/lib/systemd/user/../system/sockets.target.
Created symlink /var/tmp/inst1/etc/systemd/user/timers.target → /usr/lib/systemd/user/../system/timers.target.
Created symlink /var/tmp/inst1/etc/systemd/user/paths.target → /usr/lib/systemd/user/../system/paths.target.
Created symlink /var/tmp/inst1/etc/systemd/user/bluetooth.target → /usr/lib/systemd/user/../system/bluetooth.target.
Created symlink /var/tmp/inst1/etc/systemd/user/printer.target → /usr/lib/systemd/user/../system/printer.target.
Created symlink /var/tmp/inst1/etc/systemd/user/sound.target → /usr/lib/systemd/user/../system/sound.target.
Created symlink /var/tmp/inst1/etc/systemd/user/smartcard.target → /usr/lib/systemd/user/../system/smartcard.target.
Created symlink /var/tmp/inst1/etc/systemd/user/busnames.target → /usr/lib/systemd/user/../system/busnames.target.
It is better to create units in a state that completely matches the presets, i.e.
preset-all should do nothing when invoked immediately after installation.
I'm sure it was confusing to users too, suggesting that system and user units
may somehow alias each other.
This complements graphical-session.target for services which set up the
environment (e. g. dbus-update-activation-environment) and need to run before
the actual graphical session.
This unit acts as a dynamic "alias" target for any concrete graphical user
session like gnome-session.target; these should declare
"BindsTo=graphical-session.target" so that both targets stop and start at the
same time.
This allows services that run in a particular graphical user session (e. g.
gnome-settings-daemon.service) to declare "PartOf=graphical-session.target"
without having to know or get updated for all/new session types. This will
ensure that stopping the graphical session will stop all services which are
associated to it.
As kdbus won't land in the anticipated way, the bus-proxy is not needed in
its current form. It can be resurrected at any time thanks to the history,
but for now, let's remove it from the sources. If we'll have a similar tool
in the future, it will look quite differently anyway.
Note that stdio-bridge is still available. It was restored from a version
prior to f252ff17, and refactored to make use of the current APIs.
Make sure we support ExecReload= for bus-proxyd to reload configuration
during runtime. This is *really* handy when hacking on kdbus.
Package-managers are still recommended to run
`busctl --address=unix:path=` directly.
This drops the libsystemd-terminal and systemd-consoled code for various
reasons:
* It's been sitting there unfinished for over a year now and won't get
finished any time soon.
* Since its initial creation, several parts need significant rework: The
input handling should be replaced with the now commonly used libinput,
the drm accessors should coordinate the handling of mode-object
hotplugging (including split connectors) with other DRM users, and the
internal library users should be converted to sd-device and friends.
* There is still significant kernel work required before sd-console is
really useful. This includes, but is not limited to, simpledrm and
drmlog.
* The authority daemon is needed before all this code can be used for
real. And this will definitely take a lot more time to get done as
no-one else is currently working on this, but me.
* kdbus maintenance has taken up way more time than I thought and it has
much higher priority. I don't see me spending much time on the
terminal code in the near future.
If anyone intends to hack on this, please feel free to contact me. I'll
gladly help you out with any issues. Once kdbus and authorityd are
finished (whenever that will be..) I'll definitely pick this up again. But
until then, lets reduce compile times and maintenance efforts on this code
and drop it for now.
Instead of using Accept=true and running one proxy for each connection, we
now run one proxy-daemon with a thread per connection. This will enable us
to share resources like policies in the future.
kdbus has seen a larger update than expected lately, most notably with
kdbusfs, a file system to expose the kdbus control files:
* Each time a file system of this type is mounted, a new kdbus
domain is created.
* The layout inside each mount point is the same as before, except
that domains are not hierarchically nested anymore.
* Domains are therefore also unnamed now.
* Unmounting a kdbusfs will automatically also detroy the
associated domain.
* Hence, the action of creating a kdbus domain is now as
privileged as mounting a filesystem.
* This way, we can get around creating dev nodes for everything,
which is last but not least something that is not limited by
20-bit minor numbers.
The kdbus specific bits in nspawn have all been dropped now, as nspawn
can rely on the container OS to set up its own kdbus domain, simply by
mounting a new instance.
A new set of mounts has been added to mount things *after* the kernel
modules have been loaded. For now, only kdbus is in this set, which is
invoked with mount_setup_late().
In a normal running system, non-passive targets and units used during
early bootup are always started. So refusing "manual start" for them
doesn't make any difference, because a "start" command doesn't cause
any action.
In early boot however, the administrator might want to start on
of those targets or services by hand. We shouldn't interfere with that.
Note: in case of systemd-tmpfiles-setup.service, really running the
unit after system is up would break the system. So e.g. restarting
should not be allowed. The unit has "RefuseManualStop=yes", which
prevents restart too.
This should help making the boot process a bit easier to explore and
understand for the administrator. The simple idea is that "systemctl
status" now shows a link to documentation alongside the other status and
decriptionary information of a service.
This patch adds the necessary fields to all our shipped units if we have
proper documentation for them.
We finally got the OK from all contributors with non-trivial commits to
relicense systemd from GPL2+ to LGPL2.1+.
Some udev bits continue to be GPL2+ for now, but we are looking into
relicensing them too, to allow free copy/paste of all code within
systemd.
The bits that used to be MIT continue to be MIT.
The big benefit of the relicensing is that closed source code may now
link against libsystemd-login.so and friends.
