IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
AllowList= and DenyList= filter only DHCPOFFER messages. So, if
RapidCommit= is enabled, then networkd unconditionally accepts a rapid
ACK message even if its sender is filtered out by the lists.
As AllowList=/DenyList= implemented earlier than RapidCommit=, so
enabling RapidCommit= unconditionally by default may break existing
setups that use AllowList=/DenyList=.
Let's disable RapidCommit= by default when AllowList=/DenyList= is
enabled. Still the setting can be enabled by setting explicitly even
AllowList=/DenyList= is also specified.
When an interface is being reconfigured with different bridge vlan
settings, this makes old vlan IDs on the interface removed.
This also makes the PVID= setting support negative boolean value, e.g. "no",
in which case, the currently assigned PVID (typically, assigned by the
kernel when an interface is joined to a bridge) is dropped.
This feature is requested by #15291.
Note, if a .network file has no settings about bridge vlan, networkd
keeps the currently assigned vlan IDs. That's intended, to make not
break existing setups.
When a .network file has only PVID=no line in [BridgeVLAN] section, then
all assigned vlan IDs are removed.
Fixes#29975.
Closes#15291.
This implements the DHCPv4 equivalent of the DHCPv6 Rapid Commit option,
enabling a lease to be selected in an accelerated 2-message exchange
instead of the typical 4-message exchange.
As I noticed a lot of missing information when trying to implement checking
for missing info. I reimplemented the version information script to be more
robust, and here is the result.
Follow up to ec07c3c80b2b1bfa6788500202006ff85f5ae4f4
This tries to add information about when each option was added. It goes
back to version 183.
The version info is included from a separate file to allow generating it,
which would allow more control on the formatting of the final output.
New directive `NFTSet=` provides a method for integrating network configuration
into firewall rules with NFT sets. The benefit of using this setting is that
static network configuration or dynamically obtained network addresses can be
used in firewall rules with the indirection of NFT set types. For example,
access could be granted for hosts in the local subnetwork only. Firewall rules
using IP address of an interface are also instantly updated when the network
configuration changes, for example via DHCP.
This option expects a whitespace separated list of NFT set definitions. Each
definition consists of a colon-separated tuple of source type (one of
"address", "prefix", or "ifindex"), NFT address family (one of "arp", "bridge",
"inet", "ip", "ip6", or "netdev"), table name and set name. The names of tables
and sets must conform to lexical restrictions of NFT table names. The type of
the element used in the NFT filter must match the type implied by the
directive ("address", "prefix" or "ifindex") and address type (IPv4 or IPv6)
as shown type implied by the directive ("address", "prefix" or "ifindex") and
address type (IPv4 or IPv6) must also match the set definition.
When an interface is configured with IP addresses, the addresses, subnetwork
masks or interface index will be appended to the NFT sets. The information will
be removed when the interface is deconfigured. systemd-networkd only inserts
elements to (or removes from) the sets, so the related NFT rules, tables and
sets must be prepared elsewhere in advance. Failures to manage the sets will be
ignored.
/etc/systemd/network/eth.network
```
[DHCPv4]
...
NFTSet=prefix:netdev:filter:eth_ipv4_prefix
```
Example NFT rules:
```
table netdev filter {
set eth_ipv4_prefix {
type ipv4_addr
flags interval
}
chain eth_ingress {
type filter hook ingress device "eth0" priority filter; policy drop;
ip saddr != @eth_ipv4_prefix drop
accept
}
}
```
```
$ sudo nft list set netdev filter eth_ipv4_prefix
table netdev filter {
set eth_ipv4_prefix {
type ipv4_addr
flags interval
elements = { 10.0.0.0/24 }
}
}
```
- rename TCPRetransmissionTimeOutSec= -> TCPRetransmissionTimeoutSec,
- refuse infinity,
- fix the input value verifier (USEC_PER_SEC -> USEC_PER_MSEC),
- use DIV_ROUND_UP() when assigning the value.
Follow-ups for 1412d4a4fea234fd2afda26b1241cd700246a672.
Closes#28898.
RFC4861 Neighbor Discovery – Sections 4.2 and 6.3.4
From section 4.2. Router Advertisement Message Format:
Cur Hop Limit 8-bit unsigned integer. The default value that
should be placed in the Hop Count field of the IP
header for outgoing IP packets. A value of zero
means unspecified (by this router).
