IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Confirmed via `udevadm test /sys/class/input/eventX` that
POINTINGSTICK_* properties were not being set for my T430s trackpoint.
After adding a local entry file (as advised in this file), the same
`udevadm test` command showed properties.
More importantly, the movement of mouse using trackpoint felt much
better. Hard to describe its previous state, but following come to mind:
slippery, hard to control, awkward. Now it feels more consistent and predictable.
A little on the sensitive side with the defaults, but didn't think it warranted
dedicated properties just for this series though as the X230 is same generation
and uses the defaults.
Before local change:
$ udevadm info /dev/input/event5
P: /devices/platform/i8042/serio1/serio2/input/input6/event5
N: input/event5
E: DEVNAME=/dev/input/event5
E: DEVPATH=/devices/platform/i8042/serio1/serio2/input/input6/event5
E: ID_BUS=i8042
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_INPUT_POINTINGSTICK=1
E: LIBINPUT_DEVICE_GROUP=11/2/a:synaptics-pt/serio0
E: MAJOR=13
E: MINOR=69
E: SUBSYSTEM=input
E: USEC_INITIALIZED=38609915
After change:
$ udevadm info /dev/input/event5
P: /devices/platform/i8042/serio1/serio2/input/input6/event5
N: input/event5
E: DEVNAME=/dev/input/event5
E: DEVPATH=/devices/platform/i8042/serio1/serio2/input/input6/event5
E: ID_BUS=i8042
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_INPUT_POINTINGSTICK=1
E: LIBINPUT_DEVICE_GROUP=11/2/a:synaptics-pt/serio0
E: MAJOR=13
E: MINOR=69
E: POINTINGSTICK_CONST_ACCEL=1.0
E: POINTINGSTICK_SENSITIVITY=200
E: SUBSYSTEM=input
E: USEC_INITIALIZED=38609915
The changes in pci.ids, usb.ids, and the .hwdb files are almost always
additions. 20-OUI.hwdb drops a few names and replaces them by
"IEEE Registration Authority". I'm not sure what to do about this.
Many other removals do not seem to be removals of real entries, but
rather placeholder or generic names.
So far I avoided adding license headers to meson files, but they are pretty
big and important and should carry license headers like everything else.
I added my own copyright, even though other people modified those files too.
But this is mostly symbolic, so I hope that's OK.
The GP-electronic T701 has its LCD panel mounted upside-down, initially
my plan was to fix this by transparently rotating the image in the i915
driver (my "drm/i915: Deal with upside-down mounted LCD" patch), but
that approach has been rejected instead the kernel will now export
a "panel orientation" property on the drm-connector for the panel and
let userspace deal with it.
Since the upside-down-ness of the panel is now no longer transparently
hidden from userspace, the current accel mount quirk for the T701 needs
to be updated to take the upside-down-ness into account.
The input_id builtin assigns the various ID_INPUT based on the exported evdev
bits. In some cases, the device may not have the properties required to label
a device as one specific type but the physical form factor is clear.
e.g. in the case of #7197 it's a tablet pad that does not have x/y axes which
the kernel exports for pads for historical reasons.
A custom override is needed, best to be solved with a hwdb entry.
Related #7197
On some devices the display (LCD panel) is mounted non upright
in the device's casing, e.g. mounted upside-down or 90 degree rotated.
Document the expected ACCEL_MOUNT_MATRIX settings for such devices.
The vast majority of touchpads are internal, so let's assume that any USB
touchpad is internal by default (exception: bluetooth) and manually mark the
ones that are external. That's a lot more future-proof than having to mark all
internal touchpads that use USB as internal - that number is only going to
increase.
Related to #7068
The advantage is that is the name is mispellt, cpp will warn us.
$ git grep -Ee "conf.set\('(HAVE|ENABLE)_" -l|xargs sed -r -i "s/conf.set\('(HAVE|ENABLE)_/conf.set10('\1_/"
$ git grep -Ee '#ifn?def (HAVE|ENABLE)' -l|xargs sed -r -i 's/#ifdef (HAVE|ENABLE)/#if \1/; s/#ifndef (HAVE|ENABLE)/#if ! \1/;'
$ git grep -Ee 'if.*defined\(HAVE' -l|xargs sed -i -r 's/defined\((HAVE_[A-Z0-9_]*)\)/\1/g'
$ git grep -Ee 'if.*defined\(ENABLE' -l|xargs sed -i -r 's/defined\((ENABLE_[A-Z0-9_]*)\)/\1/g'
+ manual changes to meson.build
squash! build-sys: use #if Y instead of #ifdef Y everywhere
v2:
- fix incorrect setting of HAVE_LIBIDN2
Ignoring duplicate entry: 0001C8 = "THOMAS CONRAD CORP.", "CONRAD CORP."
Ignoring duplicate entry: 080030 = "NETWORK RESEARCH CORPORATION", "ROYAL MELBOURNE INST OF TECH"
Ignoring duplicate entry: 080030 = "NETWORK RESEARCH CORPORATION", "CERN"
→ we have two vendor prefixes with duplicate entries. For the first one,
there are two entries with what appear to be the same company. In the
second case, the same prefix is assigned to three different entities.
I arbitrarily chose to prefer the first entry.
This is rather slow (1 m 45 s on my laptop), but since it'd be only used
once per release, maybe this doesn't matter that much.
Output is identical to ids-update.pl with the set of source files committed in
the grandparent.
Without the original files it's hard to see what changed "upstream", and what
entries were added and removed. Upstream did not keep the entries sorted, and
our processing scripts did not sort the output either, so from just looking at
diffs it's hard to say what changed. So let's keep the original data, at least
for a few update cycles, so get a better handle on the upstream changes.
It's a few hundred kilobytes, so not that big, and text, so it should
compresses well.
ninja -c build hwdb-update
During the initial meson conversion, custom_target:s and run_target:s behaved
the same, and the target name became a top-level command. Now custom_target:s
require the subdir to be included, e.g. we have man/man target to build man pages,
but run_target:s not. So I think this target got a name that is so generic because
of the confusion caused by changing rules. Let's rename it.
Note that this will only work with the new "hid-retrode" driver in the
upcoming 4.12 kernel as otherwise the mouse events and the 4 joypad
ports are bundled into a single event node.
When the joystick is integrated directly into the machine, knowing
that the device is internal allows us to disable attached functionality
when the device is not used or inaccessible.
For example, this allows disabling rumble and accelerometer on
flip-console-like devices like the GPD-XD.
The intent of the hwdb entry for the Cube iWork8 air tablet buttons is
to fix them being swapped. The kernel is using left-meta for the
home key (it is being treated as the windows key on keyboards, as it has
a windows logo on most x86 tablets).
Fix the hwdb entry to only swap the buttons and not change the keycode
emitted by the home key.
Using conf.set() with a boolean argument does the right thing:
either #ifdef or #undef. This means that conf.set can be used unconditionally.
Previously I used '1' as the placeholder value, and that needs to be changed to
'true' for consistency (under meson 1 cannot be used in boolean context). All
checks need to be adjusted.
This is useful on systems like NixOS, where python3 is not in
/usr/bin/python3 as well as for people using alternative ways to
install python such as virtualenv/pyenv.
The indentation for emacs'es meson-mode is added .dir-locals.
All files are reindented automatically, using the lasest meson-mode from git.
Indentation should now be fairly consistent.
This is the equivalent of $(INSTALL_DIRS) and install-touch-usr-hook.
I did not bother to create the directories into which we install files,
since they will be created anyway.
v2:
- remove bashism
It's crucial that we can build systemd using VS2010!
... er, wait, no, that's not the official reason. We need to shed old systems
by requring python 3! Oh, no, it's something else. Maybe we need to throw out
345 years of knowlege accumulated in autotools? Whatever, this new thing is
cool and shiny, let's use it.
This is not complete, I'm throwing it out here for your amusement and critique.
- rules for sd-boot are missing. Those might be quite complicated.
- rules for tests are missing too. Those are probably quite simple and
repetitive, but there's lots of them.
- it's likely that I didn't get all the conditions right, I only tested "full"
compilation where most deps are provided and nothing is disabled.
- busname.target and all .busname units are skipped on purpose.
Otherwise, installation into $DESTDIR has the same list of files and the
autoconf install, except for .la files.
It'd be great if people had a careful look at all the library linking options.
I added stuff until things compiled, and in the end there's much less linking
then in the old system. But it seems that there's still a lot of unnecessary
deps.
meson has a `shared_module` statement, which sounds like something appropriate
for our nss and pam modules. Unfortunately, I couldn't get it to work. For the
nss modules, we need an .so version of '2', but `shared_module` disallows the
version argument. For the pam module, it also didn't work, I forgot the reason.
The handling of .m4 and .in and .m4.in files is rather awkward. It's likely
that this could be simplified. If make support is ever dropped, I think it'd
make sense to switch to a different templating system so that two different
languages and not required, which would make everything simpler yet.
v2:
- use get_pkgconfig_variable
- use sh not bash
- use add_project_arguments
v3:
- drop required:true and fix progs/prog typo
v4:
- use find_library('bz2')
- add TTY_GID definition
- define __SANE_USERSPACE_TYPES__
- use join_paths(prefix, ...) is used on all paths to make them all absolute
v5:
- replace all declare_dependency's with []
- add more conf.get guards around optional components
v6:
- drop -pipe, -Wall which are the default in meson
- use compiler.has_function() and compiler.has_header_symbol instead of the
hand-rolled checks.
- fix duplication in 'liblibsystemd' library name
- use the right .sym file for pam_systemd
- rename 'compiler' to 'cc': shorter, and more idiomatic.
v7:
- use ENABLE_ENVIRONMENT_D not HAVE_ENVIRONMENT_D
- rename prefix to prefixdir, rootprefix to rootprefixdir
("prefix" is too common of a name and too easy to overwrite by mistake)
- wrap more stuff with conf.get('ENABLE...') == 1
- use rootprefix=='/' and rootbindir as install_dir, to fix paths under
split-usr==true.
v8:
- use .split() also for src/coredump. Now everything is consistent ;)
- add rootlibdir option and use it on the libraries that require it
v9:
- indentation
v10:
- fix check for qrencode and libaudit
v11:
- unify handling of executable paths, provide options for all progs
This makes the meson build behave slightly differently than the
autoconf-based one, because we always first try to find the executable in the
filesystem, and fall back to the default. I think different handling of
loadkeys, setfont, and telinit was just a historical accident.
In addition to checking in $PATH, also check /usr/sbin/, /sbin for programs.
In Fedora $PATH includes /usr/sbin, (and /sbin is is a symlink to /usr/sbin),
but in Debian, those directories are not included in the path.
C.f. https://github.com/mesonbuild/meson/issues/1576.
- call all the options 'xxx-path' for clarity.
- sort man/rules/meson.build properly so it's stable
At each time pressing the WiFi Fn key on Dell Latitude E7270 laptop, the system
reports the following error/warning messages:
atkbd serio0: Unknown key pressed (translated set 2, code 0x88 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e008 ' to make it known.
This is due to commit 0e33634 which was added to fix
https://bugs.launchpad.net/ubuntu/+source/udev/+bug/1441849.
However on Dell Latitude E7* models, we need to restore the old generic
behavior which consists in ignoring the key event since it's already done by
the HW.
Indeed the hardware has a specific driver (dell_wmi) to handle rfkill in the
hardware level. So, as long as the hardware handles, the best is to leave as
is.
This patch was originally written by Takashi Iwai.
Fixes#5047
Sets ID_INPUT_TOUCHPAD_INTEGRATION=internal for Microsoft Surface Pro Type Covers (IDs should cover at least the type covers for the Surface Pro 3 and 4). This is needed so that libinput can disable the touchpad while typing.
The power key keycode e076 is emitted on several different Acer laptop
models, and it is expected that it will also be used on upcoming models.
Verified on the following models:
Aspire ES1-421
Aspire ES1-432
Aspire A515-51
Aspire A515-51G
Aspire A517-51
Aspire A517-51G
Nitro AN515-31
According to the key code v2.02 from Acer, scancode E0 86 will be
generated for airplane mode hotkey. Verified on Aspire, TravelMate,
Easynote and Predator.
iio-sensor-proxy expects the accelerometer oriented as follows:
positive x - to the right, positive y - up (opposite to gravity).
The hardware in the Asus TP300LJ-DW049H is however oriented
differently:
positive x - down, positive y - to the left
This commit adds a ACCEL_MOUNT_MATRIX quirk for this
particular laptop model.
It is useful for desktop environments to be able to show Caps-Lock or
Num-Lock status changes as an on-screen display when using a keyboard
that doesn't have LEDs for this.
Closes: #5559
This patch adds quirks for the two laptops I could test on
(8540w and 8560w). The accelerometer is configured in the
kernel to report values according to the base of the laptop.
We want the values according to the screen instead.
It is likely (but untested) to match all HP laptops with the
lis3lv02d accelerometer on this list:
https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/drivers/platform/x86/hp_accel.c#n207
The home and power buttons on the Cube iwork8 air tablet are swapped,
add a hwdb entry fixing this up.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
