IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
There's really no point to send the reboot SIGINT from machinectl
directly, if machined can do that anyway. This saves code, and
makes machinectl network transparent for these verbs. And while we are
at it we can easily add a "poweroff" verb in addition to "reboot". Yay!
Commit 4a77ca7 was an attempt at fixing the wording of --after and --before,
but the new wording was unclear.
Split the combined --after/--before section into a separate section for
each, explicitly state what each option does, and add information about
how these lists are generated.
Reported-by: Andrey Borzenkov <arvidjaar@gmail.com>
Reported-by: Lennart Poettering <lennart@poettering.net>
Now --listen-http=-3 --listen-https=-4 can be used to spawn a µhttpd
server on those two ports, in http and https modes respectively.
As before, --listen-http=3 --listen-https=4 will launch µhttpd servers
on ports 3 and 4.
The whole tool is made dependent on µhttpd availability. It should be
easy to make the µhttpd parts conditional, but since transfer over
HTTP seems to be the primary use case, currently this is not done.
Current implementation uses nested epoll loops: sd-event is used for
the external event loop, and µhttpd uses epoll in its own
loop. Unfortunately µhttpd does not expose enough information to add
the descriptors it uses to the external event loop. This means that
starvation of other events is possible, if one of the inner µhttpd
loops is constantly busy. This means that µhttpd servers should not
be mixed with other sources.
The TLS authentication parts haven't been really tested properly, and
should not be take too seriously.
This will let journald forward logs as messages sent to all logged in
users (like wall).
Two options are added:
* ForwardToWall (default yes)
* MaxLevelWall (default emerg)
'ForwardToWall' is overridable by kernel command line option
'systemd.journald.forward_to_wall'.
This is used to emulate the traditional syslogd behaviour of sending
emergency messages to all logged in users.
This makes it possible to initialize the /etc/machine-id file on an
arbitrary filesystem hierarchy. This helps systems that wish to run
this at image creation time in a subdirectory, or from initramfs before
pivot-root is called.
[tomegun: converted to using _cleanup_free_ macros]
"systemctl list-machines" shows one line per local container which
includes the current system state of the container, the number of failed
units as well as the number of currently queued jobs.
The new calls work similarly, but enforce a that a common, fixed bus
path prefix is used.
This follows discussions with Simon McVittie on IRC that it should be a
good idea to make sure that people don't use the escaping applied here
too wildly as anything other than the last label of a bus path.
When run in an initrd and no root= argument is set (or is set to
root=gpt-auto) we will automatically look for the root partition on the
same disk the EFI ESP is located on.
Since we look for swap, /home and /srv on the disk the root partition is
located on, we hence have a fully discoverable chain:
Firmware discovers the EFI ESP partition → the initrd discovers the
root partition → the host OS discovers swap, /home, and /srv.
Note that this requires an EFI boot loader that sets the
LoaderDevicePartUUID EFI variable, such as Gummiboot.
The code for parsing these properties is shared with "systemctl
set-property", which means all the resource control settings are
immediately available.
This way each user allocates from his own pool, with its own size limit.
This puts the size limit by default to 10% of the physical RAM size but
makes it configurable in logind.conf.
Previously we expected the desktop environment to take an inhibitor
lock, but this opened a race on boot-up where logind might already be
running but no DE is active.
Hence, let's move checking for additional displays into logind. This
also opens up this logic for other DEs, given that only GNOME
implemented the inhibitor logic so far.
This partially reverts 41a55c46ab
Some specifications we want to stay compatibility actually document
/var/run, not /run, and we should stay compatible with that. In order to
make sure our D-Bus implementation works on any system, regardless if
running systemd or not, we should always use /var/run which is the
only path mandated by the D-Bus spec.
Similar, glibc hardcodes the utmp location to /var/run, and this is
exposed in _UTMP_PATH in limits.h, hence let's stay in sync with this
public API, too.
We simply do not support systems where /var/run is not a symlink → /run.
Hence both are equivalent. Staying compatible with upstream
specifications hence weighs more than cleaning up superficial
appearance.
This new unit settings allows restricting which address families are
available to processes. This is an effective way to minimize the attack
surface of services, by turning off entire network stacks for them.
This is based on seccomp, and does not work on x86-32, since seccomp
cannot filter socketcall() syscalls on that platform.
According to Wikipedia it is customary to specify hardware metrics and
transfer speeds to the basis 1000 (SI decimal), while software metrics
and physical volatile memory (RAM) sizes to the basis 1024 (IEC binary).
So far we specified everything in IEC, let's fix that and be more
true to what's otherwise customary. Since we don't want to parse "Mi"
instead of "M" we document each time what the context used is.
This also changes the names to MTUBytes and BitsPerSecond, respectively. Notice
that the speed was mistakenly documented to be in bytes before this change.
This permit to switch to a specific apparmor profile when starting a daemon. This
will result in a non operation if apparmor is disabled.
It also add a new build requirement on libapparmor for using this feature.
Either it is shared across threads, or it is per-thread: decide.
Reading the source code, I see a thread_local identifier, so that's
that. But that does not yet preclude that a program may pass around
the pointer returned from the function among its own threads.
Do a best effort at saying so.
Issues fixed:
* missing words required by grammar
* duplicated or extraneous words
* inappropriate forms (e.g. singular/plural), and declinations
* orthographic misspellings
This adds the host side of the veth link to the given bridge.
Also refactor the creation of the veth interfaces a bit to set it up
from the host rather than the container. This simplifies the addition
to the bridge, but otherwise the behavior is unchanged.
Actually 'STDOUT' is something that doesn't appear anywhere: in the
stdlib we have 'stdin', and there's only the constant STDOUT_FILENO,
so there's no reason to use capitals. When refering to code,
STDOUT/STDOUT/STDERR are replaced with stdin/stdout/stderr, and in
other places they are replaced with normal phrases like standard
output, etc.
* standardize capitalization of STDIN, STDOUT, and STDERR
* reword some sentences for clarity
* reflow some very long lines to be shorter than ~80 characters
* add some missing <literal>, <constant>, <varname>, <option>, and <filename> tags
The behavior of this is a little cryptic in that $MAINPID must exit as
a direct result of receiving a signal in order for a listed signal to
be considered a success condition.
This is useful to prohibit execution of non-native processes on systems,
for example 32bit binaries on 64bit systems, this lowering the attack
service on incorrect syscall and ioctl 32→64bit mappings.
- Allow configuration of an errno error to return from blacklisted
syscalls, instead of immediately terminating a process.
- Fix parsing logic when libseccomp support is turned off
- Only keep the actual syscall set in the ExecContext, and generate the
string version only on demand.
This allows customization of the arguments used by less. The main
motivation is that some folks might not like having --no-init on every
invocation of less.
Also limit the range of vlan ids. Other implementations and
documentation use the ranges {0,1}-{4094,4095}, but we use
the one accepted by the kernel: 0-4094.
Reported-by: Oleksii Shevchuk <alxchk@gmail.com>
Let's always call the security labels the same way:
SMACK: "Smack Label"
SELINUX: "SELinux Security Context"
And the low-level encapsulation is called "seclabel". Now let's hope we
stick to this vocabulary in future, too, and don't mix "label"s and
"security contexts" and so on wildly.
This permit to let system administrators decide of the domain of a service.
This can be used with templated units to have each service in a différent
domain ( for example, a per customer database, using MLS or anything ),
or can be used to force a non selinux enabled system (jvm, erlang, etc)
to start in a different domain for each service.
This is initialized from XDG_SESSION_DESKTOP and is useful for GNOME
to recognize its own sessions. It's supposed to be set to a short string
identifying the session, such as "kde" or "gnome".
- As suggested, prefix argument variables with "arg_" how we do this
usually.
- As suggested, don't involve memory allocations when storing command
line arguments.
- Break --help text at 80 chars
- man: explain that this is about SELinux
- don't do unnecessary memory allocations when putting together mount
option string
This patch adds to new options:
-Z PROCESS_LABEL
This specifies the process label to run on processes run within the container.
-L FILE_LABEL
The file label to assign to memory file systems created within the container.
For example if you wanted to wrap an container with SELinux sandbox labels, you could execute a command line the following
chcon system_u:object_r:svirt_sandbox_file_t:s0:c0,c1 -R /srv/container
systemd-nspawn -L system_u:object_r:svirt_sandbox_file_t:s0:c0,c1 -Z system_u:system_r:svirt_lxc_net_t:s0:c0,c1 -D /srv/container /bin/sh
These connections are never torn down, even when the DHCP specifications say that
they should be. This is useful/necessary when the rootfs (or another critical fs)
is mounted over this network connection, and dataloss would result if the connection
is lost.
This option defaults to off, but our initrd generator (TBD) will enable it when
applicable.
This should fix some race with terminating systemd --user, where the
system systemd instance might race against the user systemd instance
when sending SIGTERM.
When set to auto, status will shown when the first ephemeral message
is shown (a job has been running for five seconds). Then until the
boot or shutdown ends, status messages will be shown.
No indication about the switch is done: I think it should be clear
for the user that first the cylon eye and the ephemeral messages appear,
and afterwards messages are displayed.
The initial arming of the event source was still wrong, but now should
really be fixed.
signal(7) provides a list of functions which may be called from a
signal handler. Other functions, which only call those functions and
don't access global memory and are reentrant are also safe.
sd_j_sendv was mostly OK, but would call mkostemp and writev in a
fallback path, which are unsafe.
Being able to call sd_j_sendv in a async-signal-safe way is important
because it allows it be used in signal handlers.
Safety is achieved by replacing mkostemp with open(O_TMPFILE) and an
open-coded writev replacement which uses write. Unfortunately,
O_TMPFILE is only available on kernels >= 3.11. When O_TMPFILE is
unavailable, an open-coded mkostemp is used.
https://bugzilla.gnome.org/show_bug.cgi?id=722889
Debian recently introduced the option key-slot to /etc/crypttab to
specify the LUKS key slot to be used for decrypting the device. On
systems where a keyfile is used and the key is not in the first slot,
this can speed up the boot process quite a bit, since cryptsetup does
not need to try all of the slots sequentially. (Unsuccessfully testing
a key slot typically takes up to about 1 second.)
This patch makes systemd aware of this option.
Debian bug that introduced the feature:
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=704470
