IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
This implements a shared policy cache with read-write locks. We no longer
parse the XML policy in each thread.
This will allow us to easily implement ReloadConfig().
Instead of using Accept=true and running one proxy for each connection, we
now run one proxy-daemon with a thread per connection. This will enable us
to share resources like policies in the future.
Move all the proxy code into a "struct Proxy" object that can be used
from multiple binaries.
We now dropped SMACK as we have to refactor it to work properly. We can
introduce it later on.
With this change the import tool will now unpack qcow2 images into
normal raw disk images, suitable for usage with nspawn.
This allows has the benefit of also allowing importing Ubuntu Cloud
images for usage with nspawn.
After all, nspawn can now dissect MBR partition levels, too, hence
".gpt" appears a misnomer. Moreover, the the .raw suffix for these files
is already pretty popular (the Fedora disk images use it for example),
hence sounds like an OK scheme to adopt.
This adds two new settings to networkd's .network files:
IPForwarding=yes and IPMasquerade=yes. The former controls the
"forwarding" sysctl setting of the interface, thus controlling whether
IP forwarding shall be enabled on the specific interface. The latter
controls whether a firewall rule shall be installed that exposes traffic
coming from the interface as coming from the local host to all other
interfaces.
This also enables both options by default for container network
interfaces, thus making "systemd-nspawn --network-veth" have network
connectivity out of the box.
This rule is only run on tablet/touchscreen devices, and extracts their size
in millimeters, as it can be found out through their struct input_absinfo.
The first usecase is exporting device size from tablets/touchscreens. This
may be useful to separate policy and application at the time of mapping
these devices to the available outputs in windowing environments that don't
offer that information as readily (eg. Wayland). This way the compositor can
stay deterministic, and the mix-and-match heuristics are performed outside.
Conceivably, size/resolution information can be changed through EVIOCSABS
anywhere else, but we're only interested in values prior to any calibration,
this rule is thus only run on "add", and no tracking of changes is performed.
This should only remain a problem if calibration were automatically applied
by an earlier udev rule (read: don't).
v2: Folded rationale into commit log, made a builtin, set properties
on device nodes themselves
v3: Use inline function instead of macro for mm. size calculation,
use DECIMAL_STR_MAX, other code style issues
v4: Made rule more selective
v5: Minor style issues, renamed to a more generic builtin, refined
rule further.
This fixes parsing of options in shared/generator.c. Existing code
had some issues:
- it would treate whitespace and semicolons as seperators. fstab(5)
is pretty clear that only commas matter. And the syntax does
not allow for spaces to be inserted in the field in fstab.
Whitespace might be escaped, but then it should not seperate
options. Treat whitespace and semicolons as any other character.
- it assumed that x-systemd.device-timeout would always be followed
by "=". But this is not guaranteed, hasmntopt will return this
option even if there's no value. Uninitialized memory could be read.
- some error paths would log, and inconsistently, some would just
return an error code.
Filtering is split out to a separate function and tests are added.
Similar code paths in other places are adjusted to use the new function.
Commit 003dffde2c ("machined: Move image discovery logic into src/shared,
so that we can make use of it from nspawn") moved some definitions from
machine.h to a new machine-dbus.h, but did not include it in Makefile.am
Tested that `make distcheck` works after this fix.
Even though we use fallocate() it appears that file systems like btrfs
will trigger SIGBUS on certain low-disk-space situation. We should
handle that, hence catch the signal, add it to a list of invalidated
pages, and replace the page with an empty memory area. After each write
check if SIGBUS was triggered, and consider the write invalid if it was.
This should make journald a lot more robust with file systems where
fallocate() is not reliable, for example all CoW file systems
(btrfs...), where changing written data can fail with disk full errors.
https://bugzilla.redhat.com/show_bug.cgi?id=1045810
systemd.pc contains "libdir" which can be architecture specific. Thus it needs
to be installed into libdir/pkgconfig/ instead of datadir/pkgconfig.
As nothing else is using pkgconfigdata any more, remove it entirely.
Note that udev.pc does not contain architecture specific values and thus can be
kept in /usr/share/pkgconfig/.
When doing "make clean" the unit/machines.target file gets deleted.
This causes a build error later on when trying to rebuild systemd.
V2: The file probably belongs to dist_systemunit_DATA
- Unescape instance name so that we can take almost anything as instance
name.
- Introduce "machines.target" which consists of all enabled nspawns and
can be used to start/stop them altogether
- Look for container directory using -M instead of harcoding the path in
/var/lib/container
After all, pretty much all our tools include it, and it should hence be
shared.
Also move sysfs-show.h from core/ to login/, since it has no point to
exist in core.
I figure "pull-dck" is not a good name, given that one could certainly
read the verb in a way that might be funny for 16year-olds. ;-)
Also, don't hardcode the index URL to use, make it runtime and configure
time configurable instead.
* (potentially) public headers must reside in src/systemd/ (not in
src/libsystemd*)
* some private (not prefixed with sd_) functions moved from sd-lldp.h to
lldp-internal.h
* introduce lldp-util.h for the cleanup macro, as these should not be public
* rename the cleanup macro, we always name them _cleanup_foo_, never
_cleanup_sd_foo_
* mark some function arguments as 'const'
This adds a new bus call to machined that enumerates /var/lib/container
and returns all trees stored in it, distuingishing three types:
- GPT disk images, which are files suffixed with ".gpt"
- directory trees
- btrfs subvolumes
This patch introduces LLDP support to networkd. it implements the
receiver side of the protocol.
The Link Layer Discovery Protocol (LLDP) is an industry-standard,
vendor-neutral method to allow networked devices to advertise
capabilities, identity, and other information onto a LAN. The Layer 2
protocol, detailed in IEEE 802.1AB-2005.LLDP allows network devices
that operate at the lower layers of a protocol stack (such as
Layer 2 bridges and switches) to learn some of the capabilities
and characteristics of LAN devices available to higher
layer protocols.
This adds a simply but powerful tool for downloading container images
from the most popular container solution used today. Use it like
this:
# systemd-import pull-dck mattdm/fedora
# systemd-nspawn -M fedora
This will donwload the layers for "mattdm/fedora", and make them
available locally as /var/lib/container/fedora.
The tool is pretty complete, as long as it's only about pulling down
images, or updating them. Pushing or searching is not supported yet.
This pulls out the hwdb managment from udevadm into an independent tool.
The old code is left in place for backwards compatibility, and easy of
testing, but all documentation is dropped to encourage use of the new
tool instead.
This is libudev-hwdb, but decoupled from libudev and in the libsystemd style.
The core code is unchanged, apart from the following minor changes:
- hwdb.bin located in /**/systemd/hwdb/ take preference over the ones located
in /**/udev/
- properties are stored internally in an OrderedHashmap, rather than a
linked list.
- a new API call allows individual properties to be queried directly, rather
than iterating over them all
- the iteration over properties have been moved inside the library, rather than
exposing a list directly
- the unused 'flags' parameter was dropped
When dbus client connects to systemd-bus-proxyd through
Unix domain socket proxy takes client's smack label and sets for itself.
It is done before and independent of dropping privileges.
The reason of such soluton is fact that tests of access rights
performed by lsm may take place inside kernel, not only
in userspace of recipient of message.
The bus-proxyd needs CAP_MAC_ADMIN to manipulate its label.
In case of systemd running in system mode, CAP_MAC_ADMIN
should be added to CapabilityBoundingSet in service file of bus-proxyd.
In case of systemd running in user mode ('systemd --user')
it can be achieved by addition
Capabilities=cap_mac_admin=i and SecureBits=keep-caps
to user@.service file
and setting cap_mac_admin+ei on bus-proxyd binary.
This is useful inside of containers or local networks to intrdouce a
stable name of the default gateway host (in case of containers usually
the host, in case of LANs usually local router).
The unit file only active the machine-id-commit helper if /etc is mounted
writable and /etc/machine-id is an independant mount point (should be a tmpfs).
Choose which system users defined in sysusers.d/systemd.conf and files
or directories in tmpfiles.d/systemd.conf, should be provided depending
on comile-time configuration.
Pointer acceleration for relative input devices (mice, trackballs, etc.)
applies to the deltas of the device. Alas, those deltas have no physical
reference point - a delta of 10 may be caused by a large movement of a
low-dpi mouse or by a minute movement of a high-dpi mouse.
Which makes pointer acceleration a bit useless and high-dpi devices
essentially unusable.
In an ideal world, we could read the DPI from the device directly and work
with that. In the world we actually live in, we need to compile this list
manually. This patch introduces the database, with the usual match formats
and a single property to be set on a device: MOUSE_DPI
That is either a single value for most mice, or a list of values for mice
that can change resolution at runtime. The exact format is detailed in the
hwdb file.
Note that we're explicitly overshooting the requirements we have for
libinput atm. Frequency could be detected in software and we don't
actually use the list of multiple resolutions (because we can't detect
when they change anyway). However, we might as well collect those values
from the get-go, adding/modifying what will eventually amount to hundreds
of entries is a bit cumbersome.
Note: we rely on the input_id builtin to tag us as mouse first, ordering
of the rules is important.
(David: fixed up typos and moved hwdb file into ./hwdb/)
Introduce a new optional dependency on libxkbcommon for systemd-localed.
Whenever the x11 keymap settings are changed, use libxkbcommon to compile
the keymap. If the compilation fails, print a warning so users will get
notified.
On compilation failure, we still update the keymap settings for now. This
patch just introduces the xkbcommon infrastructure to have keymap
validation in place. We can later decide if/how we want to enforce this.
add tests for the following directives:
- WorkingDirectory
- Personality
- IgnoreSIGPIPE
- PrivateTmp
- SystemCallFilter: It makes test/TEST-04-SECCOMP obsolete, so it has
been removed.
- SystemCallErrorNumber
- User
- Group
- Environment
It tests all available directives of Path units:
- PathChanged
- PathModified
- PathExists
- PathExisysGlob
- DirectoryNotEmpty
- MakeDirectory
- DirectoryMode
- Unit
That way only one file with condition code remaining, in src/shared/,
rather than src/core/.
Next step: dropping the "-util" suffix from condition-util.[ch].
This library negotiates a PPPoE channel. It handles the discovery stage and
leaves the session stage to the kernel. A further PPP library is needed to
actually set up a PPP unit (negotatie LCP, IPCP and do authentication), so in
isolation this is not yet very useful.
The test program has two modes:
# ./test-pppoe
will create a veth tunnel in a new network namespace, start pppoe-server on one
end and this client library on the other. The pppd server will time out as no
LCP is performed, and the client will then shut down gracefully.
# ./test-pppoe eth0
will run the client on eth0 (or any other netdev), and requires a PPPoE server
to be reachable on the local link.
This is a rewrite of the hashmap implementation. Its advantage is lower
memory usage.
It uses open addressing (entries are stored in an array, as opposed to
linked lists). Hash collisions are resolved with linear probing and
Robin Hood displacement policy. See the references in hashmap.c.
Some fun empirical findings about hashmap usage in systemd on my laptop:
- 98 % of allocated hashmaps are Sets.
- Sets contain 78 % of all entries, plain Hashmaps 17 %, and
OrderedHashmaps 5 %.
- 60 % of allocated hashmaps contain only 1 entry.
- 90 % of allocated hashmaps contain 5 or fewer entries.
- 75 % of all entries are in hashmaps that use trivial_hash_ops.
Clearly it makes sense to:
- store entries in distinct entry types. Especially for Sets - their
entries are the most numerous and they require the least information
to store an entry.
- have a way to store small numbers of entries directly in the hashmap
structs, and only allocate the usual entry arrays when the direct
storage is full.
The implementation has an optional debugging feature (enabled by
defining the ENABLE_HASHMAP_DEBUG macro), where it:
- tracks all allocated hashmaps in a linked list so that one can
easily find them in gdb,
- tracks which function/line allocated a given hashmap, and
- checks for invalid mixing of hashmap iteration and modification.
Since entries are not allocated one-by-one anymore, mempools are not
used for entries. Originally I meant to drop mempools entirely, but it's
still worth it to use them for the hashmap structs. My testing indicates
that it makes loading of units about 5 % faster (a test with 10000 units
where more than 200000 hashmaps are allocated - pure malloc: 449±4 ms,
mempools: 427±7 ms).
Here are some memory usage numbers, taken on my laptop with a more or
less normal Fedora setup after booting with SELinux disabled (SELinux
increases systemd's memory usage significantly):
systemd (PID 1) Original New Change
dirty memory (from pmap -x 1) [KiB] 2152 1264 -41 %
total heap allocations (from gdb-heap) [KiB] 1623 756 -53 %
test-hashmap-ordered.c is generated from test-hashmap-plain.c simply by
substituting "ordered_hashmap" for "hashmap" etc.
In the cases where tests rely on the order of entries, a distinction
between plain and ordered hashmaps is made using the ORDERED macro,
which is defined only for test-hashmap-ordered.c.
This adds a first draft of systemd-consoled. This is still missing a lot
of features and does some rather primitive rendering. However, it shows
the direction this code is going and serves as basis for further testing.
The systemd-consoled binary should be run as `systemd --user' unit. It
automatically picks up any session marked as Desktop=SYSTEMD-CONSOLE.
Therefore, you can use any login-manager you want (ranging from /bin/login
to gdm) to create sessions for systemd-consoled. However, the sessions
managers must be prepared to set the Desktop= variable properly.
The user-session is called `systemd-console', only the daemon providing
the terminal environment is called `systemd-consoled' (mind the 'd').
So far, only a single terminal session is provided on each opened
user-session. However, we support multiple user-sessions (even across
multiple seats) just fine. In the future, the workspace logic will get
extended so you can have multiple terminal sessions in a single
user-session for easier access.
Note that this is still experimental! Instructions on how to run it will
follow shortly.
All the definitions are for outside users, so drop the -internal suffix.
Internal definitions are in unifont-def.h and unifont.c, no need to share
those.
The systemd-modeset tool is meant to debug grdev issues. It simply
displays morphing colors on any found display. This is pretty handy to
look for tearing in the backends and debug hotplug issues.
Note that this tool requires systemd-logind to be compiled from git
(there're important fixes that haven't been released, yet).
The grdev-drm backend manages DRM cards for grdev. Any DRM card with
DUMB_BUFFER support can be used. So far, our policy is to configure all
available connectors, but keep pipes inactive as long as users don't
enable the displays on top.
We hard-code double-buffering so far, but can easily support
single-buffering or n-buffering. We also require XRGB8888 as format as
this is required to be supported by all DRM drivers and it is what VTs
use. This allows us to switch from VTs to grdev via page-flips instead of
deep modesets.
There is still a lot room for improvements in this backend, but it works
smoothly so far so more enhanced features can be added later.
The grdev layer provides graphics-device access via the
libsystemd-terminal library. It will be used by all terminal helpers to
actually access display hardware.
Like idev, the grdev layer is built around session objects. On each
session object you add/remove graphics devices as they appear and vanish.
Any device type can be supported via specific card-backends. The exported
grdev API hides any device details.
Graphics devices are represented by "cards". Those are hidden in the
session and any pipe-configuration is automatically applied. Out of those,
we configure displays which are then exported to the API user. Displays
are meant as lowest hardware entity available outside of grdev. The
underlying pipe configuration is fully hidden and not accessible from the
outside. The grdev tiling layer allows almost arbitrary setups out of
multiple pipes, but so far we only use a small subset of this. More will
follow.
A grdev-display is meant to represent real connected displays/monitors.
The upper level screen arrangements are user policy and not controlled by
grdev. Applications are free to apply any policy they want.
Real card-backends will follow in later patches.
Rather than forcing gcc to always produce colorized error messages
whether on tty or not, enable automatic colorization by ensuring
GCC_COLORS is set to a non-empty string.
Doing it this way removes the need for workarounds in ~/.emacs or
~/.vimrc for "M-x compile" or ":make", respectively, to work.
Like systemd-subterm, this new systemd-evcat tool should only be used to
debug libsystemd-terminal. systemd-evcat attaches to the running session
and pushes all evdev devices attached to the current session into an
idev-session. All events of the created idev-devices are then printed to
stdout for input-event debugging.
The idev-keyboard object provides keyboard devices to the idev interface.
It uses libxkbcommon to provide proper keymap support.
So far, the keyboard implementation is pretty straightforward with one
keyboard device per matching evdev element. We feed everything into the
system keymap and provide proper high-level keyboard events to the
application. Compose-features and IM need to be added later.
The evdev-element provides linux evdev interfaces as idev-elements. This
way, all real input hardware devices on linux can be used with the idev
interface.
We use libevdev to interface with the kernel. It's a simple wrapper
library around the kernel evdev API that takes care to resync devices
after kernel-queue overflows, which is a rather non-trivial task.
Furthermore, it's a well tested interface used by all other major input
users (Xorg, weston, libinput, ...).
Last but not least, it provides nice keycode to keyname lookup tables (and
vice versa), which is really nice for debugging input problems.
The idev-interface provides input drivers for all libsystemd-terminal
based applications. It is split into 4 main objects:
idev_context: The context object tracks global state of the input
interface. This will include data like system-keymaps,
xkb contexts and more.
idev_session: A session serves as controller for a set of devices.
Each session on an idev-context is independent of each
other. The session is also the main notification object.
All events raised via idev are reported through the
session interface. Apart of that, the session is a
pretty dumb object that just contains devices.
idev_element: Elements provide real hardware in the idev stack. For
each hardware device, one element is added. Elements
have no knowledge of higher-level device types, they
only provide raw input data to the upper levels. For
example, each evdev device is represented by a different
element in an idev session.
idev_device: Devices are objects that the application deals with. An
application is usually not interested in elements (and
those are hidden to applications), instead, they want
high-level input devices like keyboard, touchpads, mice
and more. Device are the high-level interface provided
by idev. Each device might be fed by a set of elements.
Elements drive the device. If elements are removed,
devices are destroyed. If elements are added, suitable
devices are created.
Applications should monitor the system for sessions and hardware devices.
For each session they want to operate on, they create an idev_session
object and add hardware to that object. The idev interface requires the
application to monitor the system (preferably via sysview_*, but not
required) for hardware devices. Whenever hardware is added to the idev
session, new devices *might* be created. The relationship between hardware
and high-level idev-devices is hidden in the idev-session and not exposed.
Internally, the idev elements and devices are virtual objects. Each real
hardware and device type inherits those virtual objects and provides real
elements and devices. Those types will be added in follow-up commits.
Data flow from hardware to the application is done via idev_*_feed()
functions. Data flow from applications to hardware is done via
idev_*_feedback() functions. Feedback is usually used for LEDs, FF and
similar operations.
We're going to need multiple binaries that provide session-services via
logind device management. To avoid re-writing the seat/session/device
scan/monitor interface for each of them, this commit adds a generic helper
to libsystemd-terminal:
The sysview interface scans and tracks seats, sessions and devices on a
system. It basically mirrors the state of logind on the application side.
Now, each session-service can listen for matching sessions and
attach to them. On each session, managed device access is provided. This
way, it is pretty simple to write session-services that attach to multiple
sessions (even split across seats).
