IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Six years ago we declared it obsolete and removed it from the docs
(c073a0c4a5) and added a note about it in
NEWS. Two years ago we add warning messages about it, indicating the
feature will be removed (41b283d0f1) and
mentioned it in NEWS again.
Let's now kill it for good.
Much like systemd.condition-needs-update= this new switch allows
overriding of a unit file condition, but this time its
ConditionFirstBoot=.
Usecase is also primarily debugging, but could be useful for other
schemes too.
As described in #15603, it is a fairly common setup to use a fqdn as the
configured hostname. But it is often convenient to use just the actual
hostname, i.e. until the first dot. This adds support in tmpfiles, sysusers,
and unit files for %l which expands to that.
Fixes#15603.
The hack with getparent().txt is not very pretty, but the whole
thing seems to work well enough. It is useful to figure out whihc
specifiers are supported where.
We probably can migrate even more, but for now let's just migrate those
which have the 1:1 identical text everywhere.
(Also, let's add the % entry to all specifier tables)
proot provides userspace-powered emulation of chroot and mount --bind,
lending it to be used on environments without unprivileged user
namespaces, or in otherwise restricted environments like Android.
In order to achieve this, proot makes use of the kernel's ptrace()
facility, which we can use in order to detect its presence. Since it
doesn't use any kind of namespacing, including PID namespacing, we don't
need to do any tricks when trying to get the tracer's metadata.
For our purposes, proot is listed as a "container", since we mostly use
this also as the bucket for non-container-but-container-like
technologies like WSL. As such, it seems like a good fit for this
section as well.
There are sometimes users who put unit files in a location that is inaccessible
when systemd starts although they are not found and thus not started because
the corresponding mount units have not activated yet.
There is already a warning for such issue in man 8 systemctl:
link PATH...
...<snip>...
The file system where
the linked unit files are located must be accessible
when systemd is started (e.g. anything underneath /home
or /var is not allowed, unless those directories are
located on the root file system).
However, it looks that it's difficult to find the warning because introductory
users typically doesn't know systemctl link.
Although there is a description in UNIT FILE LOAD PATH pointing to systemctl
link, symlink is now not explicitly mentioned there and thus users doesn't
easily get aware of they should read it.
To deal with this, let's describe "symlink" and "systemctl link" more
explicitly in UNIT FILE LOAD PATH.
When wrong element types are used, directives are sometimes placed in the wrong
section. Also, strip part of text starting with "'", which is used in a few
places and which is displayed improperly in the index.
Discussed in #13743, the -.service semantic conflicts with the
existing root mount and slice names, making this feature not
uniformly extensible to all types. Change the name to be
<type>.d instead.
Updating to this format also extends the top-level dropin to
unit types.
We want users to use Wants, but we'd describe Requires first and ask users to
look for Wants instead. While at it, let's split the wall of text into sensible
paragraphs: syntax first, followed by semantics and longer description, and
finally hints and comparison to other configuration items last.
We slowly added many many conditions over the years, and the text became
very hard to read, because all the terms were squished in one <termitem>.
This rearragnes the text into a new subsection, with minimal grammar changes
and removal of repetitions.
The description of Alias= wasn't incorrect, but it sounded like Alias= creates
a different type of dependency, while it's just a glorified way to create
symlinks. Also recommend 'preset' in addition to 'enable'.
Describe .wants/.requires dirs as equals, without implying that the [Install]
section can only be used for .wants.
The text was partially out of date (systemd-networkd.service now creates as
alias in /etc, not /usr/lib, let's just not say anything about the full path).
Before only one comparison was allowed. Let's make this more flexible:
ConditionKernelVersion = ">=4.0" "<=4.5"
Fixes#12881.
This also fixes expressions like "ConditionKernelVersion=>" which would
evaluate as true.
Originally the description of conditions was brief, so it was acceptable
to put this part at the end. But now we have a myriad conditions, and
this crucial bit of information is easy to miss.
According to the Filesystem Hierarchy Standard, "The /usr/local hierarchy is for use by the system administrator when installing software locally. It needs to be safe from being overwritten when the system software is updated". So it should not be used by installed packages.
The "include" files had type "book" for some raeason. I don't think this
is meaningful. Let's just use the same everywhere.
$ perl -i -0pe 's^..DOCTYPE (book|refentry) PUBLIC "-//OASIS//DTD DocBook XML V4.[25]//EN"\s+"http^<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN"\n "http^gms' man/*.xml
No need to waste space, and uniformity is good.
$ perl -i -0pe 's|\n+<!--\s*SPDX-License-Identifier: LGPL-2.1..\s*-->|\n<!-- SPDX-License-Identifier: LGPL-2.1+ -->|gms' man/*.xml
From WordNet (r) 3.0 (2006) [wn]:
time-out
n 1: a brief suspension of play; "each team has two time-outs left"
From The Free On-line Dictionary of Computing (18 March 2015) [foldoc]:
timeout
A period of time after which an error condition is raised if
some event has not occured. A common example is sending a
message. If the receiver does not acknowledge the message
within some preset timeout period, a transmission error is
assumed to have occured.
The current use of literal + replaceable is pretty ugly as it usually
ends up with cgroup_disable= rendered in quotes, which looks really
weird, and this doesn't conform with others of a similar type (for
example, the earlier `DefaultDependencies=no` discussion in the same
file.
The way this is used drifted a bit from the original intent. Let's update
the description and add some examples to inspire people to texts that look
less bad during initial boot.
In the documentation for ConditionXYZ= we claimed that AssertXYZ= would
have an effect on unit state (which is wrong), while at the
documentation for AssertXYZ= we said it only has an effect on the job,
but not the unit (which is right). Let's fix this contradiction, and
only claim the latter.
Also, fix a couple of other things (for example, stop talking about a
"failure state", but let's just expressly called it "the 'failed' state",
as that's the actual name of that state.
Finally, let's emphasize again when the conditions/assertions are
executed, and that they hence are not useful to conditionalize deps.
Fixes: #10433
C.f. 287419c119: 'systemctl exit 42' can be
used to set an exit value and pulls in exit.target, which pulls in systemd-exit.service,
which calls org.fdo.Manager.Exit, which calls method_exit(), which sets the objective
to MANAGER_EXIT. Allow the same to happen through SuccessAction=exit.
v2: update for 'exit' and 'exit-force'
We would accept e.g. FailureAction=reboot-force in user units and then do an
exit in the user manager. Let's be stricter, and define "exit"/"exit-force" as
the only supported actions in user units.
v2:
- rename 'exit' to 'exit-force' and add new 'exit'
- add test for the parsing function
FailureAction=/SuccessAction= were added later then StartLimitAction=, so it
was easiest to refer to the existing description. But those two settings are
somewhat simpler (they just execute the action unconditionally) while
StartLimitAction= has additional timing and burst parameters, and they are
about to take on a more prominent role, so let's move the description of
allowed values.
Docbook styles required those to be present, even though the templates that we
use did not show those names anywhere. But something changed semi-recently (I
would suspect docbook templates, but there was only a minor version bump in
recent years, and the changelog does not suggest anything related), and builds
now work without those entries. Let's drop this dead weight.
Tested with F26-F29, debian unstable.
$ perl -i -0pe 's/\s*<authorgroup>.*<.authorgroup>//gms' man/*xml
These lines are generally out-of-date, incomplete and unnecessary. With
SPDX and git repository much more accurate and fine grained information
about licensing and authorship is available, hence let's drop the
per-file copyright notice. Of course, removing copyright lines of others
is problematic, hence this commit only removes my own lines and leaves
all others untouched. It might be nicer if sooner or later those could
go away too, making git the only and accurate source of authorship
information.
This part of the copyright blurb stems from the GPL use recommendations:
https://www.gnu.org/licenses/gpl-howto.en.html
The concept appears to originate in times where version control was per
file, instead of per tree, and was a way to glue the files together.
Ultimately, we nowadays don't live in that world anymore, and this
information is entirely useless anyway, as people are very welcome to
copy these files into any projects they like, and they shouldn't have to
change bits that are part of our copyright header for that.
hence, let's just get rid of this old cruft, and shorten our codebase a
bit.
This corresponds nicely with the specifiers we already pass for
/var/lib, /var/cache, /run and so on.
This is particular useful to update the test-path service files to
operate without guessable files, thus allowing multiple parallel
test-path invocations to pass without issues (the idea is to set $TMPDIR
early on in the test to some private directory, and then only use the
new %T or %V specifier to refer to it).
Usually, we order our settings in our unit files in a logical order,
grouping related settings together, and putting more relevant stuff
first, instead of following a strictly alphabetical order.
For specifiers I think it makes sense to follow an alphabetical order
however, since they literally are just characters, and hence I think the
concept of alphabetical ordering is much more commanding for them. Also,
since specifiers are usually not used in combination, but mostly used
indepdently of each other I think it's not that important to group
similar ones together.
No other changes except the reordering.
Those are quite similar to %i/%I, but refer to the last dash-separated
component of the name prefix.
The new functionality of dash-dropins could largely supersede the template
functionality, so it would be tempting to overload %i/%I. But that would
not be backwards compatible. So let's add the two new letters instead.
The description in the man page disagreed with the code. Let the code win,
since if anybody is using this, they are more likely to depend on actual
behaviour rather than the docs. (In Fedora workstation installation there's
only one use, and it doesn't make much sense either way: SyslogIdentifier=%N
in xfs_scrub@.service.)
Also adds dots at the end everywhere, because we have multiple sentences in
some explanations, so we need dots.
We have a common parser, but for the user it might be
completely unobvious that the same general rules apply
to all those files. Let's add a page about the basic syntax
so that the more specific pages don't have to repeat those
details.
Files which are installed as-is (any .service and other unit files, .conf
files, .policy files, etc), are left as is. My assumption is that SPDX
identifiers are not yet that well known, so it's better to retain the
extended header to avoid any doubt.
I also kept any copyright lines. We can probably remove them, but it'd nice to
obtain explicit acks from all involved authors before doing that.
So far we didn't document control, transient, dbus config, or generator paths.
But those paths are visible to users, and they need to understand why systemd
loads units from those paths, and how the precedence hierarchy looks.
The whole thing is a bit messy, since the list of paths is quite long.
I made the tables a bit shorter by combining rows for the alternatives
where $XDG_* is set and the fallback.
In various places, tags are split like <element
param="blah">
this. This is necessary to keep everyting in one logical XML line so that
docbook renders the table properly.
Replaces #8050.
Follow-up for e79eabdb1b. There was an
apparent contradiction:
man/systemd.unit says for Requires=:
Besides, with or without specifying After=, this unit will be deactivated
if one of the other units get deactivated.
Also, some unit types may deactivate on their own (for example, a service
process may decide to exit cleanly, or a device may be unplugged by the
user), which is not propagated to units having a Requires= dependency.
Fixes#7870.
This adds a simple condition/assert/match to the service manager, to
udev's .link handling and to networkd, for matching the kernel version
string.
In this version we only do fnmatch() based globbing, but we might want
to extend that to version comparisons later on, if we like, by slightly
extending the syntax with ">=", "<=", ">", "<" and "==" expressions.
