IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
We should not fall back to dbus-1 and connect to the proxy when kdbus
returns an error that indicates that kdbus is running but just does not
accept new connections because of quota limits or something similar.
Based on a patch by Kay.
This reverts commit d4d00020d6. The idea of
the commit is broken and needs to be reworked. We really cannot reduce
the bus-addresses to a single address. We always will have systemd with
native clients and legacy clients at the same time, so we also need both
addresses at the same time.
We use dashes in our bloom-tags. Make sure the newly introduced arg0has
tag uses the same style.
Note that the external dbus-tags don't use dashes, though. They are
defined in the spec and we need to keep compatibility there.
Previously, sd-bus inofficially already supported bus matches that
tested a string against an array of strings ("as"). This was done via an
enhanced way to interpret "arg0=" matches. This is problematic however,
since clients have no way to determine if their respective
implementation understood strv matches or not, thus allowing invalid
matches to be installed without a way to detect that.
This patch changes the logic to only allow such matches with a new
"arg0has=" syntax. This has the benefit that non-conforming
implementations will return a parse error and a client application may
thus efficiently detect support for the match type.
Matches of this type are useful for "udev"-like systems that "tag" objects
with a number of strings, and clients need to be able to match against
any of these "tags".
The name "has" takes inspiration from Python's ".has_key()" construct.
This allows marking properties as "explicit". Properties marked like
this are included in the introspection, but are avoided in GetAll()
property queries, PropertiesChanged() signals and in in GetManaged()
object manager calls and InterfacesAdded() signals.
Expensive properties may be marked that way, and they will be
retrievable when explicitly being requested, but never in "blanket"
all-property queries and signals.
This flag may be combined with the flags for "const" and
"emit-validation" properties, but not with "emit-validation", as that
is only useful for properties whose value shall be sent in "blanket"
all-property signals.
The "explicit" flag is also exposed in the introspection data via a new
annotation.
When enumerating machines from /run, and when accepting machine names
for operations, be more strict and always validate.
Note that these checks are strictly speaking unnecessary, since
enumeration happens only on the trusted /run...
As it turns out machine_name_is_valid() does the exact same thing as
hostname_is_valid() these days, as it just invoked that and checked the
name length was < 64. However, hostname_is_valid() checks the length
against HOST_NAME_MAX anyway (which is 64 on Linux), hence any
additional check is redundant.
We hence replace machine_name_is_valid() by a macro that simply maps it
to hostname_is_valid() but sets the allow_trailing_dot parameter to
false. We also move this this call to hostname-util.h, to the same place
as the hostname_is_valid() declaration.
If a connection passed KDBUS_HELLO_ACTIVATOR, it cannot do I/O on the
bus. Hence, we should not treat it as proper peer. To actually query it,
you have to explicitly ask for activators.
This makes kdbus in-line with what dbus-daemon does.
This reverts commit 92d16a53e3. As it turns
out, this is not how ObjectManager is supposed to work. It is just a
special behavior of BlueZ, but no-one else implements it this way.
Revert the patch as discussed on github, and as such revert to the
previous behavior (as described in the spec).
Prior to commit c32eb440ba, libudev's
function udev_enumerate_scan_devices() had behaved differently. If
parent match was added with udev_enumerate_add_match_parent(),
udev_enumerate_scan_devices() did not return error if some child devices
had no subsystem symlink in sysfs. An example of such devices is USB
endpoints /sys/bus/usb/devices/*/ep_*. If there was a parent match
against USB device, old implementation of udev_enumerate_scan_devices()
did not treat ep_* device directories without subsystem symlink as error
and just ignored them, but new implementation returns -ENOENT (also
ignoring these devices) though correctly enumerates all other matching
devices.
To compare, you could look at 96df036fe3,
in src/libudev/libudev-enumerate.c, function parent_add_child():
if (!match_subsystem(enumerate, udev_device_get_subsystem(dev)))
goto nomatch;
udev_device_get_subsystem() was returning NULL, match_subsystem() was
returning false, and USB endpoint device was ignored.
New parent_add_child() from src/libsystemd/sd-device/device-enumerator.c
checks return value of sd_device_get_subsystem() and fails if subsystem
was not found. Absence of subsystem symlink should not be really treated
as error because all enumerations of children of USB devices will fail
with -ENOENT. This new behavior also breaks system-config-printer.
So restore old behavior and treat absence of subsystem symlink as no
match.
To be able to use `systemd-run` or `machinectl login` on a container
that is in a private user namespace, the sub-process must have entered
the user namespace before connecting to the container's D-Bus, otherwise
the UID and GID in the peer credentials are garbage.
So we extend namespace_open and namespace_enter to support UID namespaces,
and we enter the UID namespace in bus_container_connect_{socket,kernel}.
namespace_open will degrade to a no-op if user namespaces are not enabled
in the kernel.
Special handling is required for the setns call in namespace_enter with
a user namespace, since transitioning to your own namespace is forbidden,
as it would result in re-entering your user namespace as root.
Arguably it may be valid to check this at the call site, rather than
inside namespace_enter, but it is less code to do it inside, and if the
intention of calling namespace_enter is to *be* in the target namespace,
rather than to transition to the target namespace, it is a reasonable
approach.
The check for whether the user namespace is the same must happen before
entering namespaces, as we may not be able to access /proc during the
intermediate transition stage.
We can't instead attempt to enter the user namespace and then ignore
the failure from it being the same namespace, since the error code is
not distinct, and we can't compare namespaces while mid-transition.
The following functions return immediately if a null pointer was passed.
* calendar_spec_free
* link_address_free
* manager_free
* sd_bus_unref
* sd_journal_close
* udev_monitor_unref
* udev_unref
It is therefore not needed that a function caller repeats a corresponding check.
This issue was fixed by using the software Coccinelle 1.0.1.
Whenever one of our calls is invoked with a non-NULL, writable
sd_bus_error parameter, let's fill in some valid error on failure. We
previously only filled in remote errors, but never local errors, which is
hard to handle by users. Hence, let's clean this up to always fill in
the error.
This introduces a new bus_assert_return() macro that works like
assert_return() but optionally also initializes a bus_error struct.
Fixes#224.
Based on a patch by Umut Tezduyar.
We should not fall back to dbus-1 and connect to the proxy when kdbus
returns an error that indicates that kdbus is running but just does not
accept new connections because of quota limits or something similar.
Using is_kdbus_available() in libsystemd/ requires it to move from
shared/ to libsystemd/.
Based on a patch from David Herrmann:
https://github.com/systemd/systemd/pull/886
Previously, if the event loop never ran before sd_event_now() would
fail. With this change it will instead fall back to invoking now(). This
way, the function cannot fail anymore, except for programming error when
invoking it with wrong parameters.
This takes into account the fact that many callers did not handle the
error condition correctly, and if the callers did, then they kept simply
invoking now() as fall back on their own. Hence let's shorten the code
using this call, and make things more robust, and let's just fall back
to now() internally.
Whether now() is used or the cache timestamp may still be detected via
the return value of sd_event_now(). If > 0 is returned, then the fall
back to now() was used, if == 0 is returned, then the cached value was
returned.
This patch also simplifies many of the invocations of sd_event_now():
the manual fall back to now() can be removed. Also, in cases where the
call is invoked withing void functions we can now protect the invocation
via assert_se(), acknowledging the fact that the call cannot fail
anymore except for programming errors with the parameters.
This change is inspired by #841.
Using --size option triggers an assert failure below because
parse_size() requires the second argument, base, being either 1000 or
1024. As it's for a packet size, it'd be better using IEC binary
suffix (base 1024) IMHO.
$ busctl --size 2048
Assertion 'base == 1000 || base == 1024' failed at src/basic/util.c:2222,
function parse_size(). Aborting.
Aborted (core dumped)
In member_compare_func(), it compares interface, type and name of
members. But as it can contain NULL pointer, it needs to check them
before calling strcmp(). So make it as a separate strcmp_ptr
function (named after streq_ptr) so that it can be used by others.
Also let streq_ptr() to use it in order to make the code simpler.
We *must not* assume that an entry returned by KDBUS_CMD_LIST only
carries a single KDBUS_ITEM_OWNED_NAME. Similarly, we already parse
multiple such items for message-metadata, so make sure we support the
same on KDBUS_CMD_LIST.
By relying on the kernel to return all names separately, we limit the
kernel API significantly. Stop this and let the kernel decide how to
return its data.
