IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
We have four legal cases:
1. /usr/lib/os-release exists and /etc/os-release is a symlink to it
2. both exist but /etc/os-release is not a symlink to /usr/lib/os-release
3. only /usr/lib/os-release exists
4. only /etc/os-release exists
The generic setup code in test-functions and create-busybox-image didn't handle
case 3.
The test-specific code in TEST-50 didn't handle 2 (because the general setup
code would only install /etc/os-release in the image and
grep -f /usr/lib/os-release would not work) and 4 (same reason) and would fail
in case 3 in generic setup.
Follow the same model established for RootImage and RootImageOptions,
and allow to either append a single list of options or tuples of
partition_number:options.
The sd_notify() socket that nspawn binds that the payload can use to
talk to it was previously stored in /run/systemd/nspawn/notify, which is
weird (as in the previous commit) since this makes /run/systemd
something that is cooperatively maintained by systemd inside the
container and nspawn outside of it.
We now have a better place where container managers can put the stuff
they want to pass to the payload: /run/host/, hence let's make use of
that.
This is not a compat breakage, since the sd_notify() protocol is based
on the $NOTIFY_SOCKET env var, where we place the new socket path.
Follows the same pattern and features as RootImage, but allows an
arbitrary mount point under / to be specified by the user, and
multiple values - like BindPaths.
Original implementation by @topimiettinen at:
https://github.com/systemd/systemd/pull/14451
Reworked to use dissect's logic instead of bare libmount() calls
and other review comments.
Thanks Topi for the initial work to come up with and implement
this useful feature.
Allows to specify mount options for RootImage.
In case of multi-partition images, the partition number can be prefixed
followed by colon. Eg:
RootImageOptions=1:ro,dev 2:nosuid nodev
In absence of a partition number, 0 is assumed.
Let's find the right os-release file on the host side, and only mount
the one that matters, i.e. /etc/os-release if it exists and
/usr/lib/os-release otherwise. Use the fixed path /run/host/os-release
for that.
Let's also mount /run/host as a bind mount on itself before we set up
/run/host, and let's mount it MS_RDONLY after we are done, so that it
remains immutable as a whole.
Opening a verity device is an expensive operation. The kernelspace operations
are mostly sequential with a global lock held regardless of which device
is being opened. In userspace jumps in and out of multiple libraries are
required. When signatures are used, there's the additional cryptographic
checks.
We know when two devices are identical: they have the same root hash.
If libcrypsetup returns EEXIST, double check that the hashes are really
the same, and that either both or none have a signature, and if everything
matches simply remount the already open device. The kernel will do
reference counting for us.
In order to quickly and reliably discover if a device is already open,
change the node naming scheme from '/dev/mapper/major:minor-verity' to
'/dev/mapper/$roothash-verity'.
Unfortunately libdevmapper is not 100% reliable, so in some case it
will say that the device already exists and it is active, but in
reality it is not usable. Fallback to an individually-activated
unique device name in those cases for robustness.
The kernel interface requires setting up read-only bind-mounts in
two steps, the bind first and then a read-only remount.
Fix nspawn-mount, and cover this case in the integration test.
Fixes#16484
When the RTC time at boot is off in the future by a few days, OnCalendar=
timers will be scheduled based on the time at boot. But if the time has been
adjusted since boot, the timers will end up scheduled way in the future, which
may cause them not to fire as shortly or often as expected.
Update the logic so that the time will be adjusted based on monotonic time.
We do that by calculating the adjusted manager startup realtime from the
monotonic time stored at that time, by comparing that time with the realtime
and monotonic time of the current time.
Added a test case to validate this works as expected. The test case creates a
QEMU virtual machine with the clock 3 days in the future. Then we adjust the
clock back 3 days, and test creating a timer with an OnCalendar= for every 15
minutes. We also check the manager startup timestamp from both `systemd-analyze
dump` and from D-Bus.
Test output without the corresponding code changes that fix the issue:
Timer elapse outside of the expected 20 minute window.
next_elapsed=1594686119
now=1594426921
time_delta=259198
With the code changes in, the test passes as expected.
Several recent failed runs show that the test is still racy in two ways:
1) Sometimes it takes a while before the PID file is created, leading
to:
```
[ 10.950540] testsuite-47.sh[308]: ++ cat /leakedtestpid
[ 10.959712] testsuite-47.sh[308]: cat: /leakedtestpid: No such file or directory
[ 10.959824] testsuite-47.sh[298]: + leaked_pid=
```
2) Again, sometimes we check the leaked PID before the unit is actually
stopped, leading to a false negative:
```
[ 18.099599] testsuite-47.sh[346]: ++ cat /leakedtestpid
[ 18.116462] testsuite-47.sh[333]: + leaked_pid=342
[ 18.117101] testsuite-47.sh[333]: + systemctl stop testsuite-47-repro
...
[ 20.033907] testsuite-47.sh[333]: + ps -p 342
[ 20.080050] testsuite-47.sh[351]: PID TTY TIME CMD
[ 20.080050] testsuite-47.sh[351]: 342 ? 00:00:00 sleep
[ 20.082040] testsuite-47.sh[333]: + exit 42
```
When a command asks to load a unit directly and it is in state
UNIT_NOT_FOUND, and the cache is outdated, we refresh it and
attempto to load again.
Use the same logic when building up a transaction and a dependency in
UNIT_NOT_FOUND state is encountered.
Update the unit test to exercise this code path.
SIG-prefixed signals for `kill` are not POSIX compliant, so on Ubuntu CI
(which defaults to dash instead of bash) the TEST-52 contains following
error:
[ 9693.549638] sh[51]: + systemctl poweroff --no-block
[ 9693.553130] systemd-logind[26]: System is powering down.
[ 9693.608911] sh[54]: /bin/sh: 1: kill: Illegal option -S
This can be reproduced manually as well, either by running dash, or bash
in POSIX mode:
$ dash -c 'kill -SIGKILL 123'
dash: 1: kill: Illegal option -S
$ bash --posix -c 'kill -SIGKILL 123'
bash: line 0: kill: SIGKILL: invalid signal specification
When the system is under heavy load, it can happen that the unit cache
is refreshed for an unrelated reason (in the test I simulate this by
attempting to start a non-existing unit). The new unit is found and
accounted for in the cache, but it's ignored since we are loading
something else.
When we actually look for it, by attempting to start it, the cache is
up to date so no refresh happens, and starting fails although we have
it loaded in the cache.
When the unit state is set to UNIT_NOT_FOUND, mark the timestamp in
u->fragment_loadtime. Then when attempting to load again we can check
both if the cache itself needs a refresh, OR if it was refreshed AFTER
the last failed attempt that resulted in the state being
UNIT_NOT_FOUND.
Update the test so that this issue reproduces more often.
Prompted by systemd/systemd#16111.
* check if /var is a mountpoint - if not, something went wrong. In case
of systemd/systemd#16111 the /failed file was created, because
systemd-cryptsetup failed, but it ended up being empty, making the result
check incorrectly pass
* forward journal messages to console - if we fail to mount /var,
journald won't flush logs to the persistent storage and we end up
empty handed and with no clue what went wrong
For example, without systemd/systemd#16111 and with this patch:
...
[FAILED] Failed to start systemd-cryptsetup@varcrypt.service.
See 'systemctl status systemd-cryptsetup@varcrypt.service' for details.
[DEPEND] Dependency failed for cryptsetup.target.
...
[ 3.882451] systemd-cryptsetup[581]: Key file /etc/varkey is world-readable. This is not a good idea!
[ 3.883946] systemd-cryptsetup[581]: WARNING: Locking directory /run/cryptsetup is missing!
[ 3.884846] systemd-cryptsetup[581]: Failed to load Bitlocker superblock on device /dev/disk/by-uuid/180ba5ef-873b-4018-9968-47c23431f71a: Invalid argument
...
[ 4.099451] sh[606]: + mountpoint /var
[ 4.100025] sh[603]: + systemctl poweroff --no-block
[ 4.101636] systemd[1]: Finished systemd-user-sessions.service.
[ 4.102598] sh[608]: /var is not a mountpoint
[FAILED] Failed to start testsuite-02.service.
dm-verity support in dissect-image at the moment is restricted to GPT
volumes.
If the image a single-filesystem type without a partition table (eg: squashfs)
and a roothash/verity file are passed, set the verity flag and mark as
read-only.
Note that run_test() calls coredumpctl in a loop because in certain
environments (1 vCPU unaccelerated QEMU VM) it might take quite a
while to process the coredump.
The time-based cache allows starting a new unit without an expensive
daemon-reload, unless there was already a reference to it because of
a dependency or ordering from another unit.
If the cache is out of date, check again if we can load the
fragment.
Check:
- There is only 3 messages logged with type stdout
- Check all messages logged does not have new line: LINE_BREAK=eof
- Check that the 3 messages are logged from a different PID
- Check the 3 MESSAGE= content
The disk attributes can take some time to update on certain filesystems,
so let's strip them from inputs of both `homectl` and `userdbctl` before
comparing them to avoid unexpected fails.
Also, switch from `cmp` to `diff` to make a potential test fail a bit more
debuggable.
Fixes: #14755
Give systemd a chance to process the stop event before checking if the
PID has indeed leaked. This should fix the intermittent test fails in CI
even with a fixed systemd version, like this one:
```
Apr 08 10:22:09 testsuite-47.sh[345]: ++ cat /leakedtestpid
Apr 08 10:22:09 testsuite-47.sh[334]: + leaked_pid=342
Apr 08 10:22:09 testsuite-47.sh[334]: + systemctl stop testsuite-47-repro
Apr 08 10:22:10 testsuite-47.sh[334]: + ps -p 342
Apr 08 10:22:10 testsuite-47.sh[348]: PID TTY TIME CMD
Apr 08 10:22:10 testsuite-47.sh[348]: 342 ? 00:00:00 sleep
Apr 08 10:22:10 testsuite-47.sh[334]: + exit 42
```
Followup to 197298ff9f
