IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
This part of the copyright blurb stems from the GPL use recommendations:
https://www.gnu.org/licenses/gpl-howto.en.html
The concept appears to originate in times where version control was per
file, instead of per tree, and was a way to glue the files together.
Ultimately, we nowadays don't live in that world anymore, and this
information is entirely useless anyway, as people are very welcome to
copy these files into any projects they like, and they shouldn't have to
change bits that are part of our copyright header for that.
hence, let's just get rid of this old cruft, and shorten our codebase a
bit.
$ sudo swapoff -av
swapoff /dev/vda4
$ sudo systemctl hibernate
Failed to hibernate system via logind: Not enough swap space for hibernation
Fixes#6729.
can_sleep() returns 0 if the operation is impossible, but
the code assumed that negative is returned in that case,
in effect reporting s2h was possible even if hibernation or
suspend were not possible.
The Linux kernel is adding support for configuring the offset
into a disk. This allows swapfiles to be more usable as users
will no longer need to set the offset on their kernel command
line.
Use this API in systemd when hibernating as well.
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
Files which are installed as-is (any .service and other unit files, .conf
files, .policy files, etc), are left as is. My assumption is that SPDX
identifiers are not yet that well known, so it's better to retain the
extended header to avoid any doubt.
I also kept any copyright lines. We can probably remove them, but it'd nice to
obtain explicit acks from all involved authors before doing that.
Suspend to Hibernate is a new sleep method that invokes suspend
for a predefined period of time before automatically waking up
and hibernating the system.
It's similar to HybridSleep however there isn't a performance
impact on every suspend cycle.
It's intended to use with systems that may have a higher power
drain in their supported suspend states to prevent battery and
data loss over an extended suspend cycle.
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
This new feature bypasses checking if a swap partition is mounted
or if there is enough swap space available for hibernation to
succeed.
This can be useful when a system with a Solid State Disk (SSD)
has no normal swap partition or file configured, and a custom
systemd unit is used to mount a swap file just before hibernating
and unmount it just after resuming.
Signed-off-by: Vittorio Gambaletta <git-systemd@vittgam.net>
The macro is generically useful for putting together search paths, hence
let's make it truly generic, by dropping the implicit ".d" appending it
does, and leave that to the caller. Also rename it from
CONF_DIRS_NULSTR() to CONF_PATHS_NULSTR(), since it's not strictly about
dirs that way, but any kind of file system path.
Also, mark CONF_DIR_SPLIT_USR() as internal macro by renaming it to
_CONF_PATHS_SPLIT_USR() so that the leading underscore indicates that
it's internal.
There are more than enough calls doing string manipulations to deserve
its own files, hence do something about it.
This patch also sorts the #include blocks of all files that needed to be
updated, according to the sorting suggestions from CODING_STYLE. Since
pretty much every file needs our string manipulation functions this
effectively means that most files have sorted #include blocks now.
Also touches a few unrelated include files.
All users of get_status_field() expect the field pattern to occur in
the beginning of a line, and the delimiter is ':'.
Hardcode this into the function, and also skip any whitespace before ':'
to support fields in files like /proc/cpuinfo. Add support for returning
the full field value (currently stops on first whitespace).
Rename the function so it's easier to ensure all callers switch to new
semantics.
As a followup to 086891e5c1 "log: add an "error" parameter to all
low-level logging calls and intrdouce log_error_errno() as log calls
that take error numbers", use sed to convert the simple cases to use
the new macros:
find . -name '*.[ch]' | xargs sed -r -i -e \
's/log_(debug|info|notice|warning|error|emergency)\("(.*)%s"(.*), strerror\(-([a-zA-Z_]+)\)\);/log_\1_errno(-\4, "\2%m"\3);/'
Multi-line log_*() invocations are not covered.
And we also should add log_unit_*_errno().
String which ended in an unfinished quote were accepted, potentially
with bad memory accesses.
Reject anything which ends in a unfished quote, or contains
non-whitespace characters right after the closing quote.
_FOREACH_WORD now returns the invalid character in *state. But this return
value is not checked anywhere yet.
Also, make 'word' and 'state' variables const pointers, and rename 'w'
to 'word' in various places. Things are easier to read if the same name
is used consistently.
mbiebl_> am I correct that something like this doesn't work
mbiebl_> ExecStart=/usr/bin/encfs --extpass='/bin/systemd-ask-passwd "Unlock EncFS"'
mbiebl_> systemd seems to strip of the quotes
mbiebl_> systemctl status shows
mbiebl_> ExecStart=/usr/bin/encfs --extpass='/bin/systemd-ask-password Unlock EncFS $RootDir $MountPoint
mbiebl_> which is pretty weird
Special care is needed so that we get an error message if the
file failed to parse, but not when it is missing. To avoid duplicating
the same error check in every caller, add an additional 'warn' boolean
to tell config_parse whether a message should be issued.
This makes things both shorter and more robust wrt. to error reporting.
Introduce a new configuration file /etc/systemd/coredump.conf to
configure when to place coredumps in the journal and when on disk.
Since the coredumps are quite large, default to storing them only on
disk.
If -flto is used then gcc will generate a lot more warnings than before,
among them a number of use-without-initialization warnings. Most of them
without are false positives, but let's make them go away, because it
doesn't really matter.
Before 34a3baa4d 'sleep-config: Dereference pointer before check for NULL'
oom conditions would not be detected properly. After that commit, a double
free was performed.
Rework the whole function to be easier to understand, and also replace
strv_split_nulstr with strv_new, since we know the strings anyway.
This fixes a bug pointed out by http://css.csail.mit.edu/stack/
(Optimization-unstable code)
It is a similar fix as f146f5e159 (2013-12-30, core:
Forgot to dereference pointer when checking for NULL)
To explain this bug consider the following similar, but simpler code:
if (!p)
free(*p)
Assume the if condition evaluates to true, then we will access *p,
which means the compiler can assume p is a valid pointer, so it could
dereference p and use the value *p.
Assuming p as a valid pointer, !p will be false.
But initally we assumed the condition evaluates to true.
By this reasoning the optimizing compiler can deduce, we have dead code.
("The if will never be taken, as *p must be valid, because otherwise
accessing *p inside the if would segfault")
This led to an error message of the static code checker, so I checked the
code in question.
As we access *modes and *states before the check in the changed line of
this patch, I assume the line to be wrong and we actually wanted to check
for *modes and *states being both non null.
Since 0c6f1f4ea4 the check was useless, because the kernel will
ever only write "partition" or "file" there.
OTOH, it is possible that "\\040(deleted)" (escaped " (deleted)")
will be added for removed files. This should not happen, so add
a warning to detect those cases.
Travis tests are failing, probably because /proc/meminfo is not available
in the test environment. The same might be true in some virtualized systems,
so just treat missing /proc/meminfo as a sign that hibernation is not
possible.
Condition that is checked is taken from upower:
active(anon) < free swap * 0.98
This is really stupid, because the kernel knows the situation better,
e.g. there could be two swap files, and then hibernation would be
impossible despite passing this check, or the kernel could start
supporting compressed swap and/or compressed hibernation images, and
then this this check would be too stringent. Nevertheless, until
we have something better, this should at least return a true negative
if there's no swap.
Logging of capabilities in the journal is changed to not strip leading
zeros. I consider this more readable anyway.
http://cgit.freedesktop.org/upower/tree/src/up-daemon.c#n613https://bugzilla.redhat.com/show_bug.cgi?id=1007059
