IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
This doesn't matter too much, but makes things a bit more consistent.
A minor advantage is that the file is not a configuration file for meson
anymore, so:
a) It is not built unless pulled in by another target. Since
we don't usually build man pages by default, this saves a tiny
amount of work.
b) When the .in file is updated, meson does not reconfigure everything,
but just rebuilds the dependent targets.
Now that the conversion is finished, time for benchmarking:
a full build with default settings (and -Dstandalonebinaries=true), yields
before this pull request: 1687 targets, 148.13s user 35.17s system 317% cpu 57.697 total
with the full pull request: 1714 targets, 143.07s user 27.87s system 314% cpu 54.369 total
The difference doesn't seem significant. Partial rebuilds might be faster as
mentioned before.
We had two big 'configuration_data' objects in meson config. (There are in fact
more. On is added in this series, and there's one for efi… But those others
have a handful variables only for specific purposes and don't matter). The two
sets are 'conf' and 'substs', and were inherited from the original autotools
system. In the past there was even a third set ('m4_defines'), but @yuwata
removed it in 348b44372f. And those two/three
systems had very similar data, but with different variable names, because of
historical reasons. They also used subtly different quoting (.set()
vs. .set10() vs. .set_quoted()), which was required because the templating
engines were not flexible enough. This meants we had more work when changing
things, and we needed to search for different variable names, etc.
With a more flexible templating engine we can do with just one
configuration_data object.
The naming of variables is very inconsistent. I tried to use more
modern style naming (UNDERSCORED_TITLE_CASE), but I didn't change existing
names too much. Only SYSTEM_DATA_UNIT_PATH is renamed to SYSTEM_DATA_UNIT_DIR
to match SYSTEM_CONFIG_UNIT_DIR.
I want to stop using 'substs'. But in this case, configure_file() is nicer
than custom_target(), because it causes meson to immediately generate the
helpers after configuration, so it's possible to do
'meson build && build/man/man ...', without building anything first.
We only substitute one variable here, so let's use a custom configuration_data()
object.
m4 was hugely popular in the past, because autotools, automake, flex, bison and
many other things used it. But nowadays it much less popular, and might not even
be installed in the buildroot. (m4 is small, so it doesn't make a big difference.)
(FWIW, Fedora dropped make from the buildroot now,
https://fedoraproject.org/wiki/Changes/Remove_make_from_BuildRoot. I think it's
reasonable to assume that m4 will be dropped at some point too.)
The main reason to drop m4 is that the syntax is not very nice, and we should
minimize the number of different syntaxes that we use. We still have two
(configure_file() with @FOO@ and jinja2 templates with {{foo}} and the
pythonesque conditional expressions), but at least we don't need m4 (with
m4_dnl and `quotes').
HAVE_SMACK_RUN_LABEL was dropped back in 348b44372f,
so one line in etc.conf was not rendered as expected ;(
Checking if names are defined is paying for itself!
We don't need two (and half) templating systems anymore, yay!
I'm keeping the changes minimal, to make the diff manageable. Some enhancements
due to a better templating system might be possible in the future.
For handling of '## ' — see the next commit.
m4 was nice in '85, but the syntax feels a bit dated. Since we use python for
meson, let's use a popular python templating engine to replace some m4 usage.
A little nicety is that typos are caught:
FAILED: sysusers.d/systemd-remote.conf
/usr/bin/meson --internal exe --capture sysusers.d/systemd-remote.conf -- /home/zbyszek/src/systemd/tools/meson-render-jinja2.py config.h ../sysusers.d/systemd-remote.conf.j2
Traceback (most recent call last):
File "/home/zbyszek/src/systemd/tools/meson-render-jinja2.py", line 28, in <module>
print(render(sys.argv[2], defines))
File "/home/zbyszek/src/systemd/tools/meson-render-jinja2.py", line 24, in render
return template.render(defines)
File "/usr/lib/python3.9/site-packages/jinja2/environment.py", line 1090, in render
self.environment.handle_exception()
File "/usr/lib/python3.9/site-packages/jinja2/environment.py", line 832, in handle_exception
reraise(*rewrite_traceback_stack(source=source))
File "/usr/lib/python3.9/site-packages/jinja2/_compat.py", line 28, in reraise
raise value.with_traceback(tb)
File "<template>", line 8, in top-level template code
jinja2.exceptions.UndefinedError: 'HAVE_MICROHTTP' is undefined
This checking mirrors what 349cc4a507 did for C defines.
Old meson fails with:
Element not a string: [<Holder: <ExternalProgram 'sh' -> ['/bin/sh']>>, '-c', 'test -n "$DESTDIR" || /bin/journalctl --update-catalog']
I'm doing it as a revert so that it's easy to undo the revert when we require
newer meson. The effect is not so bad, maybe a dozen or so lines about finding
'sh'.
Meson 0.58 has gotten quite bad with emitting a message every time
a quoted command is used:
Program /home/zbyszek/src/systemd-work/tools/meson-make-symlink.sh found: YES (/home/zbyszek/src/systemd-work/tools/meson-make-symlink.sh)
Program sh found: YES (/usr/bin/sh)
Program sh found: YES (/usr/bin/sh)
Program sh found: YES (/usr/bin/sh)
Program sh found: YES (/usr/bin/sh)
Program sh found: YES (/usr/bin/sh)
Program sh found: YES (/usr/bin/sh)
Program xsltproc found: YES (/usr/bin/xsltproc)
Configuring custom-entities.ent using configuration
Message: Skipping bootctl.1 because ENABLE_EFI is false
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Message: Skipping journal-remote.conf.5 because HAVE_MICROHTTPD is false
Message: Skipping journal-upload.conf.5 because HAVE_MICROHTTPD is false
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Message: Skipping loader.conf.5 because ENABLE_EFI is false
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
Program ln found: YES (/usr/bin/ln)
...
Let's suffer one message only for each command. Hopefully we can silence
even this when https://github.com/mesonbuild/meson/issues/8642 is
resolved.
Today this is v248 with 938bdfc0fa, which,
if you don't know about the github webflow key fails to configure with
meson.build:724:8: ERROR: String "gpg: Signature made Tue 30 Mar 2021 22:59:02 CEST\ngpg: using RSA key 4AEE18F83AFDEB23\ngpg: Can't check signature: No public key\n1617137942\n" cannot be converted to int
or, if you do, with
meson.build:724:8: ERROR: String 'gpg: Signature made Tue 30 Mar 2021 22:59:02 CEST\ngpg: using RSA key 4AEE18F83AFDEB23\ngpg: Good signature from "GitHub (web-flow commit signing) <noreply@github.com>" [unknown]\ngpg: WARNING: This key is not certified with a trusted signature!\ngpg: There is no indication that the signature belongs to the owner.\nPrimary key fingerprint: 5DE3 E050 9C47 EA3C F04A 42D3 4AEE 18F8 3AFD EB23\n1617137942\n' cannot be converted to int
New glibc deprecated mallocinfo(), even newer glibc added mallocinfo2()
as replacement. Use it, if it exists.
Follow-up for 4b6f74f5a0 and related
commits.
https://github.com/systemd/systemd/pull/19316 failed with:
[1065/1670] Linking target systemd-hwdb
--- command ---
14:28:29 /root/src/test/hwdb-test.sh
--- stdout ---
./systemd-hwdb does not exist, please build first
I'm not sure what is going on here… In principle meson says that tests may be
called from any directory, but in practice is was always the build directory.
So far we were relying on systemd-hwdb being present in '.', and this worked.
Either way, it's nicer to pass the exact path, so let's do that.
* Add `bpf-framework` feature gate with 'auto', 'true' and 'false' choices
* Add libbpf [0] dependency
* Search for clang llvm-strip and bpftool binaries in compile time to
generate bpf skeleton.
For libbpf [0], make 0.2.0 [1] the minimum required version.
If libbpf is satisfied, set HAVE_LIBBPF config option to 1.
If `bpf-framework` feature gate is set to 'auto', means that whether
bpf feature is enabled or now is defined by the presence of all of
libbpf, clang, llvm and bpftool in build
environment.
With 'auto' all dependencies are optional.
If the gate is set to `true`, make all of the libbpf, clang and llvm
dependencies mandatory.
If it's set to `false`, set `BPF_FRAMEWORK` to false and make libbpf
dependency optional.
libbpf dependency is dynamic followed by the common pattern in systemd.
meson, bpf: add build rule for socket_bind program
Try to make this more manageable by reording:
- dependencies / inputs
(with subcategory of compression libraries)
- major components / outputs
- optional features / conditionals that don't fit into the two above categories
The division isn't well defined, because libraries often correspond one-to-one
to feature, but not always.
Let's assert if we ever happen to pass 0 to one of the log functions.
With the preceding commit to return -EIO from log_*(), passing 0 wouldn't
affect the return value any more, but it is still most likely an error.
The unit test code is an exception: we fairly often pass the return value
to print it, before checking what it is. So let's assert that we're not
passing 0 in non-test code. As with the previous check for %m, this is only
done in developer mode. We are depending on external code setting
errno correctly for us, which might not always be true, and which we can't
test, so we shouldn't assert, but just handle this gracefully.
I did a bunch of greps to try to figure out if there are any places where
we're passing 0 on purpose, and couldn't find any.
The one place that failed in tests is adjusted.
About "zerook" in the name: I wanted the suffix to be unambiguous. It's a
single "word" because each of the words in log_full_errno is also meaningful,
and having one term use two words would be confusing.
Using a enum is all nice and generic, but at this point it seems unlikely that
we'll add further build modes. But having an enum means that we need to include
the header file with the enumeration whenerever the conditional is used. I want
to use the conditional in log.h, which makes it hard to avoid circular imports.
We intentionally do not inline initializations with definitions for
a bunch of _cleanup_ variables in tests, to ensure valgrind is triggered.
This triggers a lot of maybe-uninitialized false positives when -O2 and
-flto are used. Suppress them.
The warning was disabled in 8794164fed to avoid
false positives. But it is useful in finding errors, even if it sometimes
results in untrue warnings (c.f. 77fac974fe, da46a1bc3c).
After #19168, #19169, and #19175, there are no warnings with
-Dbuildtype=debug-optimized/-O2 and gcc-11.0.1-0.3.fc34.x86_64. Warnings
are reenabled for -O[23]
-O0 is good for development, and -O2 is the default optimization level for
Fedora package builds. -Os, -O3, -O1, and -Og still generate some warnings. In
fact, with -Os the number of warnings seems completely hopeless. Dozens and
dozens.
With 8f20232fcb systemd-localed supports
generating locales when required. This fails if the locale directory is
read-only, so make it writable.
Closes#19138
sd-boot has a copy of a subset of codes from libbasic. This makes
sd-boot share the code with libbasic, and dedup the code.
Note, startswith_no_case() is dropped from sd-boot, as
- it is not used,
- the previous implementation is not correct,
- gnu-efi does not have StrniCmp() or so.
There is no technical reason to support systems with split-usr, except for
backwards compatibility. Even though systemd itself makes an effort to support
this, many other tools aren't as careful. Despite those efforts, we
(collectively) get it wrong often, because doing it "wrong" on systems with
merged-usr has no consequences. Since almost all developers are on such
systems, any issues are only discovered late. Supporting this split-usr mode
makes both code and documentation more complicated. The split is purely
artificial and has no justification except to allow old installation to not
update. Mechanisms to update existing systems are available though: Fedora
did that in https://fedoraproject.org/wiki/Features/UsrMove, Debian has
the usrmerge package.
The next version of Debian will only support systems with split-usr=false,
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=978636#178:
The Technical Committee resolves that Debian 'bookworm' should
support only the merged-usr root filesystem layout, dropping support
for the non-merged-usr layout.
Let's start warning if split-usr mode is used, in preparation to removing the
split in one of the future releases.
The target is update-syscall-tables, so let's call the script
update-syscall-tables.sh to reduce the cognitive overhead when
trying to find the right file.
The script is renamed to match.
Now all targets are named uniformly in a tab-completion-friendly fashion, with
the exception of systemd-update-po which is generated by the i18n module
automatically:
$ ninja -C build -t targets | grep update
systemd-update-po: phony
update-syscall-tables: phony
update-syscall-header: phony
update-hwdb: phony
update-hwdb-autosuspend: phony
update-dbus-docs: CUSTOM_COMMAND
update-man-rules: CUSTOM_COMMAND
Very old versions of meson did not include the subdirectory name in the
target name, so we started adding various "top-level" custom targets in
subdirectories. This was nice because the main meson.build file wasn't
as cluttered. But then meson started including the subdir name in the
target name. So let's move the definition to the root so we can have all
targets named uniformly.
Before this commit, udevd is built with LOG_REALM=LOG_REALM_UDEV.
However, log level specified by e.g. environment variable or kernel
command line option are also passed to LOG_REALM_SYSTEMD. So, the
maximum log level for the two realms are always equivalent, and it is
not necessary to specify the build option. Hence drop it.
Allow to setup new bind mounts for a service at runtime (via either
DBUS or a new 'systemctl bind' verb) with a new helper that forks into
the unit's mount namespace.
Add a new integration test to cover this.
Useful for zero-downtime addition to services that are running inside
mount namespaces, especially when using RootImage/RootDirectory.
If a service runs with a read-only root, a tmpfs is added on /run
to ensure we can create the airlock directory for incoming mounts
under /run/host/incoming.
vcs_tag() is slow. When the version-tag meson option is set,
we can use configure_file() directly to speed up incremental
builds.
Before (with version-tag set to v247):
```
‣ Running build script...
[1/418] Generating version.h with a custom command
real 0m0.521s
user 0m0.229s
sys 0m0.067s
```
After (with version-tag set to v247):
```
‣ Running build script...
ninja: no work to do.
real 0m0.094s
user 0m0.048s
sys 0m0.022s
```
This adds the support for veritytab.
The veritytab file contains at most five fields, the first four are
mandatory, the last one is optional:
- The first field contains the name of the resulting verity volume; its
block device is set up /dev/mapper/</filename>.
- The second field contains a path to the underlying block data device,
or a specification of a block device via UUID= followed by the UUID.
- The third field contains a path to the underlying block hash device,
or a specification of a block device via UUID= followed by the UUID.
- The fourth field is the roothash in hexadecimal.
- The fifth field, if present, is a comma-delimited list of options.
The following options are recognized only: ignore-corruption,
restart-on-corruption, panic-on-corruption, ignore-zero-blocks,
check-at-most-once and root-hash-signature. The others options will
be implemented later.
Also, this adds support for the new kernel verity command line boolean
option "veritytab" which enables the read for veritytab, and the new
environment variable SYSTEMD_VERITYTAB which sets the path to the file
veritytab to read.
By default, systemd installs various sample configuration files
containing commented-out defaults. Systems seeking to minimize the
number of files in /etc may wish to install directories and
configuration files that have semantic effects, but not install not
commented-out sample configuration files.
Turn install-sysconfdir into a multi-valued option, with a "no-samples"
value to skip installing sample-only configuration files.
This change improves integration with distributions using locale-gen to
generate missing locale on-demand, like Debian-based distributions
(Debian/Ubuntu/PureOS/Tanglu/...) and Arch Linux.
We only ever enable new locales for generation, and never disable them.
Furthermore, we only generate UTF-8 locale.
This feature is only used if explicitly enabled at compile-time, and
will also be inert at runtime if the locale-gen binary is missing.
The next libblkid v2.37 is going to support session offsets for
multi-session CD/DVDs. This feature is implemented by "hint offsets".
These offsets are optional and prober specific (e.g., iso, udf, ...).
For this purpose, the library provides a new function
blkid_probe_set_hint(), and blkid(8) provides a new command-line
option --hint <name>=<offset>. For CD/DVD, the offset name is
"session_offset".
The difference between classic --offset and the new --hint is that
--offset is very restrictive and defines the probing area and the rest
of the device is invisible to the library. The new --hint works
like a suggestion, it provides a hint where the user assumes the
filesystem, but the rest of the device is still readable for the
library (for example, to get some additional superblock information
etc.).
If the --hint is without a value then it defaults to zero.
The option --hint implementation in udev-builtin-blkid.c is backwardly
compatible. If compiled against old libblkid, then the option is used in
the same way as --offset.
Addresses: https://github.com/karelzak/util-linux/issues/1161
Addresses: https://github.com/systemd/systemd/pull/17424
Normally ls-files prints the full path to files from the repo root. But when
$GIT_WORK_TREE is set, ls-files prints paths relative to the current
directory. When rebasing, $GIT_WORK_TREE is set in the commands executed from
'rebase -x'. This causes problems if meson config is touched and the meson
reconfigures itself. ($GIT_WORK_TREE shouldn't be relevant, since the paths that
ls-files reports don't depend on the work tree, but whatever.) Let's unset
GIT_WORK_TREE to avoid the issue.
$ (cd test; git --git-dir=$PWD/../.git ls-files ':/test/dmidecode-dumps/*.bin')
test/dmidecode-dumps/HP-Z600.bin
test/dmidecode-dumps/Lenovo-ThinkPad-X280.bin
test/dmidecode-dumps/Lenovo-Thinkcentre-m720s.bin
$ (cd test; GIT_WORK_TREE=$PWD/.. git --git-dir=$PWD/../.git ls-files ':/test/dmidecode-dumps/*.bin')
dmidecode-dumps/HP-Z600.bin
dmidecode-dumps/Lenovo-ThinkPad-X280.bin
dmidecode-dumps/Lenovo-Thinkcentre-m720s.bin
Fixes#18148.
