IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
This never made into a release, so we can change the name with impunity.
Suggested by Davide Pesavento.
I opted to add the "ing" ending. "Fair queuing" is the name of the general
concept and algorithm, and "Fair queue" is mostly used for the implementation
name.
This extends the "uid:gid" syntax for "u" lines so that a group
name can be given instead of a GID. This requires that the group
is either queued for creation by sysusers, or it is already defined
on the system.
Closes#14340
Having /etc/securetty in test containers prevents root from logging into
them:
```
Jan 31 10:15:11 systemd-testsuite login[69]: pam_securetty(login:auth): access denied: tty 'pts/0' is not secure !
Jan 31 10:15:11 systemd-testsuite login[69]: FAILED LOGIN 1 FROM pts/0 FOR root, Authentication failure
```
There's a race condition in the sysuser test where it may try to read
entries from the journal before they are available. Fix it by adding a
`journalctl --sync` call.
BugLink: https://bugs.launchpad.net/bugs/1776654
Failing after a single check leads to extra sleeps scattered through
test cases, and can also lead to false failures. Instead perform a
recheck for a number of seconds until the state matches, and fail only
if the timeout is exceeded.
This allows removing all the manual sleeps in the testcases.
We wait for "basic.target" being reached in the user instance anyway
before allowing the user's session to start, hence doing such a wait is
unnecessary, since that would just mean we'd wait for "default.target"
on top of "basic.target", but we shouldn#t need anything of that...
Hence, let's simplify this, reduce explicit sync points.
The name is not as universal as we want, still, hence let's use our own
user we create with sysusers.d/. That should yield same behaviour
everywhere (and also test sysusers a bit as side effect).
let's make sure we always invoke our commands through /bin/sh, since
on some distros su will use /bin/nologin (or whatever is listed in
/etc/passwd) as shell otherwise and we don#t want that.
To support ProtectHome=y in a user namespace (which mounts the inaccessible
nodes), the nodes need to be accessible by the user. Create these paths and
devices in the user runtime directory so they can be used later if needed.
The test exercises that PrivateTmp=yes and ProtectHome={read-only,tmpfs}
directives work as expected when PrivateUsers=yes in a user manager.
Some code is also added to test-functions to help set up test cases that
exercise the user manager.
PrefixRoute= was added by e63be0847c,
but unfortunately, the meaning of PrefixRoute= is inverted; when true
IFA_F_NOPREFIXROUTE flag is added. This introduces AddPrefixRoute=
setting.
Don't try to show top level drop-in for non-existent units or when trying to
instantiate non-instantiated units:
$ systemctl cat nonexistent@.service
Assertion 'name' failed at src/shared/dropin.c:143, function unit_file_find_dirs(). Aborting.
$ systemctl cat systemd-journald@.service
Assertion 'name' failed at src/shared/dropin.c:143, function unit_file_find_dirs(). Aborting.
The code existed in machinectl to use stdin/stdout if the path for
import/export tar/raw was empty or dash (-) but a check to
`fd_verify_regular` in importd prevented it from working.
Update the check instead to explicitly check for regular file or
pipe/fifo.
Fixes#14346
These tests two have shown to be flaky in Ubuntu test infrastructure,
but got more reliable with increased timeouts of 300 seconds each.
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Stochastic Fairness Queueing is a classless queueing discipline.
SFQ does not shape traffic but only schedules the transmission of packets, based on 'flows'.
The goal is to ensure fairness so that each flow is able to send data in turn,
thus preventing any single flow from drowning out the rest.
Meson appears to set the rpath only for some binaries it builds, but not
all. (The rules are not clear to me, but that's besides the point of
this commit).
Let's make sure if our test script operates on a binary that has no
rpath set we fall back preferably to the BUILD_DIR rather than directly
to the host.
This matters if a test uses a libsystemd symbol introduced in a version
newer than the one on the host. In that case "ldd" will not work on the
test binary if rpath is not set. With this fix that behaviour is
corrected, and "ldd" works correctly even in this case.
(Or in other words: before this fix on binaries lacking rpath we'd base
dependency info on the libraries of the host, not the buidl tree, if
they exist in both.)
In some containers unshare() is made unavailable entirely. Let's deal
with this that more gracefully and disable our sandboxing of services
then, so that we work in a container, under the assumption the container
manager is then responsible for sandboxing if we can't do it ourselves.
Previously, we'd insist on sandboxing as soon as any form of BindPath=
is used. With this change we only insist on it if we have a setting like
that where source and destination differ, i.e. there's a mapping
established that actually rearranges things, and thus would result in
systematically different behaviour if skipped (as opposed to mappings
that just make stuff read-only/writable that otherwise arent').
(Let's also update a test that intended to test for this behaviour with
a more specific configuration that still triggers the behaviour with
this change in place)
Fixes: #13955
(For testing purposes unshare() can easily be blocked with
systemd-nspawn --system-call-filter=~unshare.)
This sould make our test suite a bit more robust if it is slow running.
A few of our test services use StandardOutput=tty or StandardError=tty
in the tests in order to connect test services to the container console.
This gets into conflict with the container getty which wants exclusive
access to the console. Since the container getty is started with
Type=idle it typically gets started after a timeout only if the TTY is
already used, which hence introduces a race: if the test finishes
earlier all is good, if not, then the test gets kicked off the TTY which
then causes bash to abort since it cannot write any error messages
anymore.
Let's fix this hence: all tests that connect to the tty are now
synchronized to getty-pre.target, so they finish before any getty is
started.
We currently use the host's kernel and initramfs in our QEMU tests.
If the host is running on an encrypted LUKS partition, then the initramfs
will have a crypttab setup looking for the particular root disk it needs to
encrypt before booting into the system.
However, this disk obviously doesn't exist in our QEMU VM, so it turns out
our tests end up waiting for this device to become available, which will
never actually happen, and boot hangs for 90s until that service times out.
[*** ] A start job is running for /dev/disk/by-uuid/01234567-abcd-1234-abcd-0123456789ab (20s / 1min 30s)
In order to prevent this issue, let's pass "rd.luks=0" to disable LUKS in
the initramfs only as part of our default kernel command-line in our QEMU
tests.
This is enough to disable this behavior and prevent the timeout, while at
the same time doesn't conflict with our tests that actually check for LUKS
behavior in the systemd running under test (such as TEST-02-CRYPTSETUP).
Tested: `sudo make -C TEST-02-CRYPTSETUP/ clean setup run`
Discussed in #13743, the -.service semantic conflicts with the
existing root mount and slice names, making this feature not
uniformly extensible to all types. Change the name to be
<type>.d instead.
Updating to this format also extends the top-level dropin to
unit types.
journald assumes that getsockopt(SO_PEERCRED) correctly identifies the
process on the remote end of the socket. However, this is incorrect
according to man 7 socket:
The returned credentials are those that were in effect at the
time of the call to connect(2) or socketpair(2).
This becomes a problem when a new process inherits the stdout stream
from a parent. First, log messages from the child process will
be attributed to the parent. Second, the struct ucred used by journald
becomes invalid as soon as the parent exits. Further sendmsg calls then
fail with ENOENT. Logs for the child process then vanish from the journal.
Fix this by using recvmsg on the stdout stream, and refreshing the cached
struct ucred if SCM_CREDENTIALS indicate a new process.
Fixes#13708
The systemd-networkd-tests.py has some regex that uses non-capturing
groups, but there is no need to use that with assertRegex; the
groups aren't referenced so it doesn't matter if it's capturing or
non-capturing. However, there are a few places where optional groups
should have been used instead, so this changes that.
Specifically, groups like this:
(?:whatever |)
should actually be:
(whatever )?
Additionally, this is specifically needed for these tests to run on
Debian systems, because this assertRegex:
'Link File: (?:/usr)/lib/systemd/network/99-default.link'
needs to be:
'Link File: (/usr)?/lib/systemd/network/99-default.link'
The name with plural made more sense where multiple options could be specified
in one line. After changes in the pull request, this option only accepts one
value, so from users' POV it should be singular.
(The field in the data structure remains plural, because it actually stores
multiple values.)
Just as `RuntimeMaxSec=` is supported for service units, add support for
it to scope units. This will gracefully kill a scope after the timeout
expires from the moment the scope enters the running state.
This could be used for time-limited login sessions, for example.
Signed-off-by: Philip Withnall <withnall@endlessm.com>
Fixes: #12035
TEST-41 verifies that the StartLimitBurst property will correctly
limit the number of unit restarts, but the test currently doesn't
adjust the StartLimitIntervalSec which defaults to 10 seconds.
On Ubuntu CI, running under un-accelerated qemu, it can take more than
10 seconds to perform all 3 restarts, which avoids the burst limit,
and fails the test.
Instead, specify a long StartLimitIntervalSec in the test, so we can
be sure to correctly test StartLimitBurst even on slow testbeds.
Fixes#13794.
Many tests were also masking systemd-machined.service. But machined
should only start when activated, so having it not masked shouldn't be
noticable. TEST-25-IMPORT needs it.
I *think* this was originally added to make it easier to see what was happening
in tests. Later we added the functionality to print the journal on failure, so
this redirection has stopped being useful.
In https://github.com/systemd/systemd/pull/13719#issuecomment-539292650
@filbranden shows that grep tries to write to stdout and fails. In general,
we should not assume that writing to the console it always possible. We have
special code to handle this in pid1 after all:
99 19:22:10.731965 fstat(1, <unfinished ...>
99 19:22:10.731993 <... fstat resumed>{st_mode=S_IFCHR|0620, st_rdev=makedev(0x88, 0), ...}) = 0
99 19:22:10.732070 write(1, "ExecStartPost={ path=/bin/echo ; argv[]=/bin/echo ${4_four_ex} ; ignore_errors=no ; start_time=[Mon 2019-10-07 19:22:10 PDT] ; stop_time=[Mon 209-10-07 19:22:10 PDT] ; pid=97 ; code=exited ; status=0 }\n", 203) = -1 EIO (Input/output error)
99 19:22:10.732174 write(2, "grep: ", 6) = -1 EIO (Input/output error)
99 19:22:10.732226 write(2, "write error", 11) = -1 EIO (Input/output error)
99 19:22:10.732263 write(2, ": Input/output error", 20) = -1 EIO (Input/output error)
99 19:22:10.732298 write(2, "\n", 1 <unfinished ...>
99 19:22:10.732325 <... write resumed>) = -1 EIO (Input/output error)
99 19:22:10.732349 exit_group(2) = ?
99 19:22:10.732424 +++ exited with 2 +++
Removing the redirection should make the tests less flakey.
Replaces #13719.
While at it, also drop NotifyAccess=all. I think it was added purposefully in
TEST-20-MAINPIDGAMES, and then cargo culted to newer tests.
This temporarily blacklists some tests when run under Ubuntu CI.
This is the upstream side of the Debian 'upstream' test MR:
https://salsa.debian.org/systemd-team/systemd/merge_requests/52
The tests blacklisted here should only be temporarily blacklisted
until they can be fixed; the intention is that these blacklist files
will be added and removed over time while debugging/fixing flaky
and/or regressed tests, without causing test failure noise for other
PRs.
v2:
- if RestartKillSignal= is not specified, fall back to KillSignal=. This is necessary
to preserve backwards compatibility (and keep KillSignal= generally useful).
We should never have used an unprefixed environment variable name.
All other systemd-nspawn variables have the "SYSTEMD_NSPAWN_" prefix,
and all other systemd variables have the "SYSTEMD_" prefix.
The new variable name takes precedence, but we fall back to checking the
old one. If only the old one is found, a warning is emitted.
In addition, SYSTEMD_NSPAWN_UNIFIED_HIERARCHY="" is accepted as an override
to avoid looking for the old variable name.
We have a variable with the same name ($UNIFIED_CGROUP_HIERARCHY) in tests,
which governs both systemd-nspawn and qemu behaviour. It is not renamed.
IPServiceType set to CS6 (network control) causes problems on some old
network setups that continue to interpret the field as IP TOS.
Make DHCP work on such networks by allowing this field to be set to
CS4 (Realtime) instead, as this maps to IPTOS_LOWDELAY.
Signed-off-by: Siddharth Chandrasekaran <csiddharth@vmware.com>
The "Ex" variant was originally only added for ExecStartXYZ= but it makes
sense to have feature parity for the rest of the exec command properties
as well (e.g. ExecReload=, ExecStop=, etc).
When nspawn container with private network starts, networkd creates
the default route for the interface. The route may cause problem on
the host side, and it can be created with DefaultRouteOnDevice= now.
Hence, this makes networkd not create the route implicitly any more.
Closes#13418.
Add a fido_id program meant to be run for devices in the hidraw
subsystem via an IMPORT directive. The program parses the HID report
descriptor and assigns the ID_SECURITY_TOKEN environment variable if a
declared usage matches the FIDO_CTAPHID_USAGE declared in the FIDO CTAP
specification. This replaces the previous approach of whitelisting all
known security token models manually.
This commit is accompanied by a test suite and a fuzzer target for the
descriptor parsing routine.
Fixes: #11996.
*We* control the sysctl setting. If the user configured IPv6, then we apply the
settings, and just make sure that at some point during the configuration the
sysctl is disabled (i.e. ipv6 enabled) if we have IPv6 configured.
Replaces #13283.
This test runs under qemu, which may run on some testbeds without
acceleration; in those cases, a 10s timeout is frequently too short.
Simply removing the timeout to allow the default timeoutsec should
be enough time for the test to finish, even on very slow testbeds.
This avoids unnecessary noise in the stderr logs which dd always produces,
such as:
0+0 records in
0+0 records out
0 bytes copied, 0.000155284 s, 0.0 kB/s
Using truncate should not result in any functional change; the image will
still be created as a sparse file of the size specified.
In Ubuntu CI, we test binaries from the installed system, not from
$BUILD_DIR, so use the appropriate binary. Most of the calls to the
binaries are part of checking/processing asan-built binaries, and so
did not apply to Ubuntu CI, except for generating noise in the stderr
log like:
objdump: '/tmp/autopkgtest.83yGoI/build.fHB/src/test/TEST-01-BASIC/systemd-journald': No such file
However this also applies to the call to systemd-nspawn, which the debian
upstream test wrapper was sed-adjusting to use the installed binary
instead of the binary in $BUILD_DIR. This commit allows removing that
sed processing of the test-functions file during Ubuntu CI test.
These tests runs under qemu, and on some testbeds, without acceleration.
On those systems, the current 180 second overall test timeout is too
short to run the test.
Increasing the timeout to 600s should be enough, even for slow
non-accelerated qemu testbeds.
This dir is created by create_empty_image_rootdir, as well as indirectly
by some other functions, but it should be created by import_initdir so
the newly-exported $initdir exists and can be used immediately without
relying on other functions to create it.
Only umount it during cleanup if the $TESTDIR/root dir is a mountpoint.
This avoids adding noise to the stderr log such as:
mountpoint: /var/tmp/systemd-test.waLOFT/root: No such file or directory
To make debugging much easier, especially for crashes in tests under
QEMU, let's store the entire coredump bundle in the systemd journal,
which is usually kept around by various CIs. Right now, we usually end
up with a journal, but without the coredump itself, which is pretty
useless.
Otherwise, changing the default gateway doesn't purge old gateway routes
left on the system during daemon restart. This also fixes removing other
foreign gateway routes that don't match the expected configuration.
Tested:
Changed gateway addresses prior to the patch and they lingered on
the system during each reconfiguration. Applied this patch and
reconfigured gateways and other routes multiple times and it removed
the foreign routes that had gateways that didn't match.
Signed-off-by: William A. Kennington III <william@wkennington.com>
The `coproc` implementation seems to be a little bit different in older
bash versions, so the `strace` is sometimes started AFTER `systemctl
daemon-reload`, which causes unexpected fails. Let's help it a little by
sleeping for a bit.
The MPOL_LOCAL constant is not recognized in current strace versions.
Let's match at least the numerical value of this constant until the
strace patch is approved & merged.
